scholarly journals Etude Comparative De La Rentabilité Des Systèmes De Pompage Solaire Et Thermique Sur Le Périmètre Irrigué De Soumarana Au Niger

2021 ◽  
Vol 17 (43) ◽  
pp. 246
Author(s):  
Illiassou Naroua ◽  
Abdoulkadri Laouali ◽  
Souley Issaka ◽  
Maman Rachid Salissou Issoufou ◽  
Hassoumi Djibo
Keyword(s):  
Small Scale ◽  
Pumping System ◽  
Irrigated Area ◽  
Climatic Hazards ◽  
Economic Survey ◽  
Pumping Equipment ◽  
The Cost ◽  
Gross Margins ◽  
Small Scale Irrigation ◽  
Solar Pumping System

Le Niger dispose d’important potentiel de terre irrigable et plusieurs formes d’irrigation ont été développées notamment la petite irrigation, afin de réduire la dépendance de la production vis-à-vis des aléas climatiques. L’objectif de ce travail est de justifier le besoin de vulgariser la technologie des équipements de pompage solaire. Pour cela une enquête technicoéconomique a été conduite auprès d’un échantillon de 80 exploitants choisis de manière aléatoire sur le périmètre irrigué de Soumarana, à raison de 40 irrigants utilisant des systèmes de pompage thermique et 40 des systèmes de pompage photovoltaïque. Les cultures de carotte et d’oignon, étant les principales spéculations, ont été retenues pour conduire l’étude afin de comparer les performances de systèmes de pompage en place. Il ressort de l’analyse des résultats que le système de pompage solaire dégage des marges brutes nettement supérieure à celles du système de pompage thermique avec des différences de l’ordre de 402 148 FCFA/ha et 342 812 FCFA/ha respectivement pour la culture de carotte et celle de l’oignon. De même, le coût du pompage du mètre cube d’eau en système de pompage solaire est nettement inférieur à celui du système de pompage thermique avec respectivement 57,27 FCFA/m3 et 80,75 FCFA/m3. Ces résultats indiquent une meilleure performance du système de pompage solaire comparativement au système thermique. Niger Republic has significant potential for irrigable land and several forms of irrigation have been developed, including small-scale irrigation, in order to reduce the dependence of production on climatic hazards. The objective of this study is to justify the need to popularize solar pumping equipment technology. To this purpose, a techno-economic survey was conducted among a sample of 80 farmers chosen randomly in the Soumarana irrigated area, at the rate of 40 farmers under fuel powered pumping system and 40 under photovoltaic pumping system. Carrot and onion crops, being the main speculations, were selected to conduct the study to compare both pumping systems performances. The analysis of the results shows that the solar pumping system has higher gross margins than the fuel powered pumping system with differences of the order of 402 148 FCFA/ha and 342 812 FCFA/ha respectively for carrot and onion crops. Similarly, the cost of pumping per cubic meter in the solar pumping system was clearly lower than that of the fuel powered pumping system with respectively 57.27 FCFA/m3 and 80.75 FCFA/m3. These results indicate a better performance of the solar pumping system compared to the fuel powered ones

Small-scale irrigation with photovoltaic water pumping system in Sahara regions

2003 ◽  
Vol 28 (7) ◽  
pp. 1081-1096 ◽  
Author(s):  
A Hamidat ◽  
B Benyoucef ◽  
T Hartani
Keyword(s):  
Small Scale ◽  
Pumping System ◽  
Water Pumping ◽  
Small Scale Irrigation

scholarly journals Development of Stirling Pump mechanism for Irrigation in remote rural farms

2019 ◽  
pp. 26-36
Author(s):  
Saeed Mohammed Wazed ◽  
Ben Hughes ◽  
Dominic O’Connor ◽  
John Kaiser Calautit
Keyword(s):  
Stirling Engine ◽  
Sub Saharan Africa ◽  
Small Scale ◽  
Solar Pv ◽  
Pumping System ◽  
True Representation ◽  
Sub Saharan ◽  
Pump Mechanism ◽  
Groundwater Source ◽  
The Cost

Inadequate supply of safe water, the requirement of food exports, Low GDP creates a scenario where 26% of the population in the Sub-Saharan Africa suffer from food insecurity. Cultivation of food locally is necessary to drive the cost of food down. This can be done using the abundant groundwater source in the region, however, the energy cost of harvesting the water supply is very high and hence not presently utilised. While solar PV technology is readily available, PV solutions are much too expensive for small scale rural farmers. This research aims at developing a solar thermal powered Stirling pump that can be produced locally, using local resources to reduce irrigation costs and provide income, food and energy security in the region, by promoting independent farming through small-scale farms. In order to develop the Stirling pump, a Low Temperature Differential (LTD) Stirling engine has been modelled in 3D, simulated and investigated with the help of Computational Fluid Dynamics with ANSYS 16.1 software. The Analysis is aimed at obtaining a true representation of the pressure, temperature and compression ratio that dictate the functioning of a Gamma type Stirling engine. This model developed can then be modified and improved upon to further boost the performance of the Stirling Engine to be integrated with a water pumping system to extract ground water for irrigation purposes.

Analysis of energy efficiency of polder of pumping stations in a Slavsk district of the Kaliningrad region

2020 ◽  
pp. 15-20
Author(s):  
Yuriy Spirin ◽  
Vladimir Puntusov
Keyword(s):  
Energy Efficiency ◽  
Agricultural Land ◽  
Statistical Processing ◽  
Drainage Rate ◽  
Pumping Stations ◽  
Kaliningrad Region ◽  
Pumping Equipment ◽  
Excess Power ◽  
The Cost ◽  
Domestic Power

In the Kaliningrad region there are about 70 % of all polder lands in Russia. On these lands with high potential fertility, it is advisable to intensive agriculture. The area for the average moisture year is an area with excessive moisture, which indicates the need to maintain the rate of drainage on agricultural land. Many different factors play a role in ensuring the drainage rate, one of which is pumping stations and pumping equipment installed on them. An important parameter in the use of pump-power equipment is energy consumption, since in this industry it is a considerable expense item. Improving the energy efficiency of pumping stations on polders is a pressing issue today. At the majority of polder pumping stations, domestic power pumping equipment is installed with excess power and head of 4–8 meters, and a new one is selected based on the maximum possible head in a given place. In the Kaliningrad region, the energy efficiency of polder pumping equipment has never been analyzed. In this paper, a statistical processing of the geodesic pressure of water at the polder pumping stations of the Slavsk region for 2000–2002 was carried out. On the basis of these data and data on the hydraulic characteristics of pressure pipelines, the calculated water pressures were determined for the rational selection of pumping equipment. The calculation of the economic efficiency of pumps with optimal power compared with pumps of excess capacity. The results of the study can serve as a justification for the transition to the pumping equipment with less power and pressure, which will lead to a decrease in the cost of money for electricity.

Wage disparities between high and low wage cities with and without the cost of living within Punjab and Sindh: An application of Oaxaca-Blinder using PSLM with HIES

2020 ◽  
Vol 4 (4) ◽  
pp. 1-14
Author(s):  
Farrukh Mahmood ◽  
Shumaila Hashim ◽  
Uzma Iram ◽  
Muhammad Zubair Chishti
Keyword(s):  
Estimation Method ◽  
Living Standards ◽  
Wage Dispersion ◽  
Cost Of Living ◽  
Wage Policy ◽  
Essential Component ◽  
Sindh Province ◽  
Economic Survey ◽  
The Cost ◽  
Wage Disparities

Wage disparities research hardly incorporate for the cost of living differences due to data restriction, while the wage disparity issue is the crucial area of economist interest. The study aims to examine the wage disparities between high and low wage cities for Punjab and Sindh province of Pakistan with and without the cost of living, deploying the data of Pakistan Social and Living Standards Measurement Survey (PSLM) with Household Integrated Economic Survey (HIES) for 2005, 2007, 2010, and 2013. Applying the Oaxaca-Blinder estimation method, the findings infer that wage dispersion is high without the cost of living model for both provinces (Punjab and Sindh) as compared to with cost of the living model. Moreover, the results reveal that the wage dispersion is greater in Punjab province than Sindh province. For policymakers, our study suggests that the cost of living is an essential component of the wage dispersion in Pakistan’s cities; it should be considered while formulating for wage policy.

scholarly journals Analysis of Operational Efficiencies and Costs for Extracting Thinned Woods in Small-Scale Forestry, Nasunogahara Area, Tochigi Prefecture, Japan

2020 ◽  
Vol 3 (1) ◽  
pp. 61
Author(s):  
Kazuhiro Aruga
Keyword(s):  
Transportation Costs ◽  
The Other ◽  
Small Scale ◽  
Light Truck ◽  
Operation Costs ◽  
Other Hand ◽  
Light Trucks ◽  
The Cost ◽  
Manual Extraction ◽  
Truck Transportation

In this study, two operational methodologies to extract thinned woods were investigated in the Nasunogahara area, Tochigi Prefecture, Japan. Methodology one included manual extraction and light truck transportation. Methodology two included mini-forwarder forwarding and four-ton truck transportation. Furthermore, a newly introduced chipper was investigated. As a result, costs of manual extractions within 10 m and 20 m were JPY942/m3 and JPY1040/m3, respectively. On the other hand, the forwarding cost of the mini-forwarder was JPY499/m3, which was significantly lower than the cost of manual extractions. Transportation costs with light trucks and four-ton trucks were JPY7224/m3 and JPY1298/m3, respectively, with 28 km transportation distances. Chipping operation costs were JPY1036/m3 and JPY1160/m3 with three and two persons, respectively. Finally, the total costs of methodologies one and two from extraction within 20 m to chipping were estimated as JPY9300/m3 and JPY2833/m3, respectively, with 28 km transportation distances and three-person chipping operations (EUR1 = JPY126, as of 12 August 2020).

scholarly journals Comparison of LPWAN Technologies: Cost Structure and Scalability

2021 ◽  
Author(s):  
Mohammad Istiak Hossain ◽  
Jan I. Markendahl
Keyword(s):  
Communication Technology ◽  
Service Providers ◽  
Communication Technologies ◽  
Cost Structure ◽  
Small Scale ◽  
Area Network ◽  
Wide Area Network ◽  
Generic Framework ◽  
Cost Efficient ◽  
The Cost

AbstractSmall-scale commercial rollouts of Cellular-IoT (C-IoT) networks have started globally since last year. However, among the plethora of low power wide area network (LPWAN) technologies, the cost-effectiveness of C-IoT is not certain for IoT service providers, small and greenfield operators. Today, there is no known public framework for the feasibility analysis of IoT communication technologies. Hence, this paper first presents a generic framework to assess the cost structure of cellular and non-cellular LPWAN technologies. Then, we applied the framework in eight deployment scenarios to analyze the prospect of LPWAN technologies like Sigfox, LoRaWAN, NB-IoT, LTE-M, and EC-GSM. We consider the inter-technology interference impact on LoRaWAN and Sigfox scalability. Our results validate that a large rollout with a single technology is not cost-efficient. Also, our analysis suggests the rollout possibility of an IoT communication Technology may not be linear to cost-efficiency.

scholarly journals Evaluating the Economic Viability of Agricultural Pellets to Supplement the Current Global Wood Pellets Supply for Bioenergy Production

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2263
Author(s):  
Mahmood Ebadian ◽  
Shahab Sokhansanj ◽  
David Lee ◽  
Alyssa Klein ◽  
Lawrence Townley-Smith
Keyword(s):  
Supply Chain ◽  
Western Europe ◽  
Small Scale ◽  
Economic Activities ◽  
Wood Pellets ◽  
Logistics System ◽  
Global Marketplace ◽  
Biomass Logistics ◽  
Production And Distribution ◽  
The Cost

In this study, an inter-continental agricultural pellet supply chain is modeled, and the production cost and price of agricultural pellets are estimated and compared against the recent cost and price of wood pellets in the global marketplace. The inter-continental supply chain is verified and validated using an integration of an interactive mapping application and a simulation platform. The integrated model is applied to a case study in which agricultural pellets are produced in six locations in Canada and shipped and discharged at the three major ports in Western Europe. The cost of agricultural pellets in the six locations is estimated to be in the range of EUR 92–95/tonne (CAD 138–142/tonne), which is comparable with the recent cost of wood pellets produced in small-scale pellet plants (EUR 99–109/tonne). The average agricultural pellet price shipped from the six plants to the three ports in Western Europe is estimated to be in a range of EUR 183–204 (CAD 274–305/tonne), 29–42% more expensive that the average recent price of wood pellets (EUR 143/tonne) at the same ports. There are several potential areas in the agricultural pellet supply chains that can reduce the pellet production and distribution costs in the mid and long terms, making them affordable supplement to the existing wood pellet markets. Potential economic activities generated by the production of pellets in farm communities can be significant. The generated annual revenue in the biomass logistics system in all six locations is estimated to be about CAD 21.80 million. In addition, the logistics equipment fleet needs 176 local operators with a potential annual income of CAD 2.18 million.

Sign in / Sign up

Export Citation Format

Share Document