scholarly journals Malocclusion with posterior unilateral crossbite affects superficial masseter and anterior temporal muscle activity during mastication

2021 ◽  
Vol 54 (3) ◽  
pp. 143
Author(s):  
Yona Pricilia Anggi Siregar ◽  
C. Christnawati ◽  
Darmawan Soetantyo

Background: Mastication patterns due to malocclusion with unilateral posterior crossbite may permanently change. Purpose: This study aimed to examine the effect of malocclusion with unilateral posterior crossbite of the superficial masseter and anterior temporal muscles on the crossbite and non-crossbite sides during mastication. Methods: Thirty subjects (8 males and 22 females) between the ages of 17 and 30 years who were students of the 2017–2019 Dentistry and Dental Hygiene Study Program, Faculty of Dentistry, UGM and who had at least two posterior teeth with unilateral posterior crossbite were divided into 10 subjects with Angle’s class I, 10 subjects with class II and 10 subjects with class III malocclusions. The amplitude of the superficial masseter and temporal anterior muscles was performed during mastication using surface electromyography (sEMG). The mean difference between the groups of malocclusion on the crossbite and non-crossbite sides of the superficial masseter and temporal anterior was analysed by a two-way analysis of variance (ANOVA). Results: The results indicated a difference in amplitude mean between the malocclusion types on the crossbite sides and non-crossbite sides of the superficial masseter and temporal anterior muscles (p<0.05). This study confirmed there was a decrease in superficial masseter and anterior temporal muscle activity on the crossbite side rather than in the non-crossbite side in Angle’s class I and class II. However, there was an increase in activity of the superficial masseter and anterior temporal muscles on the crossbite side for class III. Conclusion: Malocclusion with unilateral posterior crossbite affects masticatory activity of the superficial masseter and temporal anterior muscles on the crossbite side.

Healthcare ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 413
Author(s):  
Hui-Ling Chen ◽  
Jason Chen-Chieh Fang ◽  
Chia-Jung Chang ◽  
Ti-Feng Wu ◽  
I-Kuan Wang ◽  
...  

Background. Previous studies have shown that environmental cadmium exposure could disrupt salivary gland function and is associated with dental caries and reduced bone density. Therefore, this cross-sectional study attempted to determine whether tooth decay with tooth loss following cadmium exposure is associated with some dental or skeletal traits such as malocclusions, sagittal skeletal pattern, and tooth decay. Methods. Between August 2019 and June 2020, 60 orthodontic patients with no history of previous orthodontics, functional appliances, or surgical treatment were examined. The patients were stratified into two groups according to their urine cadmium concentrations: high (>1.06 µg/g creatinine, n = 28) or low (<1.06 µg/g creatinine, n = 32). Results. The patients were 25.07 ± 4.33 years old, and most were female (female/male: 51/9 or 85%). The skeletal relationship was mainly Class I (48.3%), followed by Class II (35.0%) and Class III (16.7%). Class I molar relationships were found in 46.7% of these patients, Class II molar relationships were found in 15%, and Class III molar relationships were found in 38.3%. The mean decayed, missing, and filled surface (DMFS) score was 8.05 ± 5.54, including 2.03 ± 3.11 for the decayed index, 0.58 ± 1.17 for the missing index, and 5.52 ± 3.92 for the filled index. The mean index of complexity outcome and need (ICON) score was 53.35 ± 9.01. The facial patterns of these patients were within the average low margin (26.65 ± 5.53 for Frankfort–mandibular plane angle (FMA)). There were no significant differences in the above-mentioned dental indices between patients with high urine cadmium concentrations and those with low urine cadmium concentrations. Patients were further stratified into low (<27, n = 34), average (27–34, n = 23), and high (>34, n = 3) FMA groups. There were no statistically significant differences in the urine cadmium concentration among the three groups. Nevertheless, a marginally significant p-value of 0.05 for urine cadmium concentration was noted between patients with low FMA and patients with high FMA. Conclusion. This analysis found no association between environmental cadmium exposure and dental indices in our orthodontic patients.


2018 ◽  
Vol 23 (6) ◽  
pp. 40.e1-40.e10 ◽  
Author(s):  
Maged Sultan Alhammadi ◽  
Esam Halboub ◽  
Mona Salah Fayed ◽  
Amr Labib ◽  
Chrestina El-Saaidi

Abstract Objective: Considering that the available studies on prevalence of malocclusions are local or national-based, this study aimed to pool data to determine the distribution of malocclusion traits worldwide in mixed and permanent dentitions. Methods: An electronic search was conducted using PubMed, Embase and Google Scholar search engines, to retrieve data on malocclusion prevalence for both mixed and permanent dentitions, up to December 2016. Results: Out of 2,977 retrieved studies, 53 were included. In permanent dentition, the global distributions of Class I, Class II, and Class III malocclusion were 74.7% [31 - 97%], 19.56% [2 - 63%] and 5.93% [1 - 20%], respectively. In mixed dentition, the distributions of these malocclusions were 73% [40 - 96%], 23% [2 - 58%] and 4% [0.7 - 13%]. Regarding vertical malocclusions, the observed deep overbite and open bite were 21.98% and 4.93%, respectively. Posterior crossbite affected 9.39% of the sample. Africans showed the highest prevalence of Class I and open bite in permanent dentition (89% and 8%, respectively), and in mixed dentition (93% and 10%, respectively), while Caucasians showed the highest prevalence of Class II in permanent dentition (23%) and mixed dentition (26%). Class III malocclusion in mixed dentition was highly prevalent among Mongoloids. Conclusion: Worldwide, in mixed and permanent dentitions, Angle Class I malocclusion is more prevalent than Class II, specifically among Africans; the least prevalent was Class III, although higher among Mongoloids in mixed dentition. In vertical dimension, open bite was highest among Mongoloids in mixed dentition. Posterior crossbite was more prevalent in permanent dentition in Europe.


2016 ◽  
Vol 21 (5) ◽  
pp. 67-74 ◽  
Author(s):  
Waqar Jeelani ◽  
◽  
Mubassar Fida ◽  
Attiya Shaikh ◽  
◽  
...  

ABSTRACT Introduction: Pubertal growth peak is closely associated with a rapid increase in mandibular length and offers a wide range of therapeutic modifiability. Objective: The aim of the present study was to determine and compare the mean ages of onset and duration of pubertal growth peak among three skeletal classes. Methods: A retrospective cross-sectional study was conducted using lateral cephalograms of 230 subjects with growth potential (110 males, 120 females). Subjects were categorized into three classes (Class I = 81, Class II = 82, Class III = 67), according to the sagittal relationship established between the maxilla and the mandible. The cervical vertebral maturation stage was recorded by means of Baccetti's method. The mean ages at CS3 and CS4 and the CS3-CS4 age interval were compared between boys and girls and among three skeletal classes. Results: Pubertal growth peak occurred on average four months earlier in girls than boys (p = 0.050). The average duration of pubertal growth peak was 11 months in Class I, seven months in Class II and 17 months in Class III subjects. Interclass differences were highly significant (Cohen's d > 0.08). However, no significant difference was found in the timing of pubertal growth peak onset among three skeletal classes (p = 0.126 in boys, p = 0.262 in girls). Conclusions: Girls enter pubertal growth peak on average four months earlier than boys. Moreover, the duration of pubertal growth peak is on average four months shorter in Class II and six months longer in Class III subjects as compared to Class I subjects.


Author(s):  
Bharat Kumar ◽  
Muhammad Abbas ◽  
Asma Naz ◽  
Naresh Kumar ◽  
Shahid Ali ◽  
...  

Objective: The objective of this study was to evaluate the mean distance between the vibrating line and fovea palatinae in Class I, Class II and Class III Soft Palate types. Methodology: This study was conducted at Dr. Ishrat-ul-Ebad Khan Institute of Oral Health Sciences Karachi among 197patients. Duration of study was six months. All patients were examined for vibrating line clinically, assessed using phonation method. Subsequently, distance between vibrating line and fovea paltatinae was measured with uncalibrated compass in various contours of soft palate. Results: Out of 197 patient, the vibrating line was seen in130 (64%) anterior to fovea palatinae, whereas, 67 (34%) vibrating line was at the fovea palatinae. The mean distance of those anterior located vibrating line from fovea palatine was calculated as 2.13 (±0.82) mm in Class, 2.07 (±0.69) mm in Class II and 1.80 (±0.82) mm in Class III soft palate contours. Statistical analysis showed no significant between gender, while statistically significant difference among age group and mean distance of anterior located vibrating line from fovea palatinae were found. Conclusions: The mean distance of vibrating line which is predominately found anterior to the fovea palatinae was 2.07 (±0.77) mm.


2020 ◽  
Vol 9 (10) ◽  
pp. e1839108586
Author(s):  
Marcio da Costa Almeida ◽  
Paula Cotrin ◽  
Fabricio Pinelli Valarelli ◽  
Rodrigo Hermont Cançado ◽  
Ricardo Cesar Gobbi de Oliveira ◽  
...  

The objective of this work was to determine the prevalence of individual traits of malocclusion in a sample of three Brazilian regions orthodontic patients and to detect interregional population differences in the prevalence of certain occlusal characteristics.  The present study was based on the examination of dental casts, intraoral photographs and panoramic radiographs of 947 orthodontic patients from 3 cities: 363 from Fortaleza (CE), 270 from Maringá (PR) and 314 from Bauru (SP), respectively, representing the Northeast, South and Southeast Brazilian regions. The relationship of the first maxillary and mandibular molars according to Angle’s classification, overjet, overbite, crowding, posterior crossbite and maxillary median diastema were examined. The chi-square and ANOVA tests were used to determine potential differences in the distribution of malocclusion when stratified Brazilian regions. Class I malocclusion was found in 499 (52.69%), Class II in 395 (41.71%) and Class III malocclusion in 53 (5,59%) subjects of all examined. Deep overbite (3.59%), midline diastemas (5.17%) and posterior crossbite (4.75%) were observed more frequently in Bauru; however, in Maringá, normal overbite (13.3%) and open bite (4.75%) were more prevalent. The results of this study showed that Class I malocclusion was the most prevalent, followed by Class II and Class III malocclusions. These occlusal relationships evaluated in the three Brazilian regions follow the same pattern of frequency as the result presented by the general population of the sample.


2012 ◽  
Vol 83 (2) ◽  
pp. 327-333 ◽  
Author(s):  
Niko C. Bock ◽  
Benjamin Reiser ◽  
Sabine Ruf

ABSTRACT Objective: To assess the effectiveness of Class II subdivision Herbst nonextraction treatment and its short-term stability retrospectively. Materials and Methods: Twenty-two Class II subdivision (SUB: right-left molar difference ≥0.75 cusp width) and 22 symmetric Class II patients (SYM: ≥0.75 cusp width bilaterally) were matched according to gender and pretreatment handwrist radiographic stage. The mean treatment duration of the Herbst and subsequent multibracket phase was 8 months and 14 months, respectively. The mean retention period amounted to 36 months. Dental casts from before treatment (T1), after Herbst treatment (T2), after Multibracket treatment (T3), and after retention (T4) were evaluated. Results: A bilateral Class I or super Class I molar relationship was seen in 72.7% (SUB) and 77.3% (SYM) at T3. The corresponding values at T4 were 63.7% (SUB) and 72.7% (SYM). A unilateral or bilateral Class III molar relationship was more frequent in the SUB group (T3: +4.6%; T4: +13.6%). For overjet, similar mean values were seen in both groups after treatment (T3: SUB, 2.7 mm; SYM, 2.3 mm) and after retention (T4: SUB, 3.0 mm; SYM, 3.4 mm). This was also true for the midline shift (T3: SUB, −0.4 mm; SYM, 0.0 mm; T4: SUB, −0.3 mm; SYM, 0.0 mm). Conclusion: Class II subdivision Herbst treatment was successful similarly to symmetric Class II Herbst treatment. However, a slight overcompensation of the molar relationship (Class III tendency) was more frequent in the subdivision patients (original Class I side).


2020 ◽  
Vol 28 (2) ◽  
Author(s):  
Mart Lintsi ◽  
Rein Aule ◽  
Heiti Annus ◽  
Martin Mooses ◽  
Mehis Viru ◽  
...  

The purpose of this study was to investigate some anthropometric variables of student candidates of the Institute of Sport Sciences and Physiotherapy, Faculty of Medicine, University of Tartu in 2017. All anthropometric measurements were made according to the recommendations of R. Martin [7]. Comparison of the height and weight data of the studied subjects with the height and weight norms of Estonia provided by Kaarma et al. [9] revealed that the entrants were taller in height but with the same average weight. In our study, the somatotypes recommended by Kaarma et al. [9] were used for the first time on entrants to the university. Our study found that male student candidates’ body somatotypes were divided into SD classes as follows: small 8.6%, medium 22.9%, large 18.6%; subtypes of pycnomorphic somatotypes: 7.1% in class I, 1.4% in class II, and 8.6% in class III; leptomorphic somatotypes were divided: 11.4% in class I, none in class II and 31.4% in class III. Based on the recommendations of several authors, we calculated the ideal body weight for all the entrants enrolled in the study. Comparison of the average body weight of entrants with the average weight calculated using the ideal weight method revealed an interesting situation. Namely, the mean values calculated using the Devine (1974) formula did not differ statistically significantly from the mean of the measured weights (t=0.101, p> 0.05). Neither did Devine’s (1974) ideal weight and BMI, Rohrer’s index and ponderal index calculated from it, and the body surface calculated according to the formulas of Dubois and Dubois and Mosteller differ from the actual figures.


2016 ◽  
Vol 10 (01) ◽  
pp. 059-063
Author(s):  
Cristiane de Oliveira Viganó ◽  
Viviane Ekerman da Rocha ◽  
Laerte Ribeiro Menezes Junior ◽  
Luiz Renato Paranhos ◽  
Adilson Luiz Ramos

ABSTRACT Objective: The aim of this study was to evaluate the mean rotation of the upper first molar (U1st M) in cast models from nontreated patients presenting: Class I, skeletal Class II, dental Class II, and skeletal Class III, comparing with Class I orthodontically treated patients. Materials and Methods: One hundred cast models were evaluated with five groups, composed of nontreated Class I (n = 20), dental Class II (n = 20), skeletal Class II (n = 20), skeletal Class III (n = 20), and treated Class I (n = 20). Measurements were taken from photocopies of the upper arches. The angle formed between a line crossing the mesiopalatal and the distal-buccalcusps of the U1st M and a line traced on mid palatal junction were measured in all samples. Results: One-way variance analysis showed that dental Class II group presented great mean rotation of the 1st molar (x = 78.95°, SD = 6.19) (P < 0.05), and in 85% of the patients from this group this angle was higher than 73°. Conclusions: The skeletal Class II and skeletal Class III groups showed similar mean position of the 1st molar, presenting rotation in approximately 50% of the patients. It can be concluded that upper molar rotation occurs mainly in dental Class II patients and shows higher mesial rotation angle.


2014 ◽  
Vol 4 (2) ◽  
pp. 16-20
Author(s):  
Sonahita Agarwal ◽  
Jitendra Bhagchandani ◽  
Praveen Mehrotra ◽  
Sudhir Kapoor ◽  
Raj Kumar Jaiswal

Introduction: Cephalometric analysis forms the backbone of orthodontic diagnosis and treatment planning. However most of the angles used to assess antero-posterior jaw base discrepancy are based on landmarks that change with age, jaw rotation and orthodontic treatment. Walkers point is one landmark that has been suggested to be stable and easy to locate on radiograph.Objective: To derive SAR angle based on Walkers point, points M and G to assess true sagittal discrepancy.Materials & method: Sixty pretreatment lateral cephalograms of North Indian subjects were grouped in three classes of skeletal pattern based on fulfillment of any two of the three criteria: ANB angle, Witt’s appraisal and Beta angle. The mean and SD for the SAR angle in three groups were calculated. ANOVA one-way of variance and Newman-Keuls tests were done to compare the groups.Result: The mean value for SAR angle of Class I skeletal pattern group was 55.98o (SD 2.24), whereas mean value for Class II and Class III skeletal groups were 50.18o and 63.65o with standard deviations 2.70 and 2.25 respectively. The receiver operating characteristic curves show that the cutoff point between Class I and Class II groups could be considered a SAR angle of approximately 53o, and the cutoff point between Class I and Class III groups could be considered a SAR angle of approximately 59o.Conclusion: The SAR angle can be a reliable diagnostic aid to assess the sagittal jaw discrepancy more consistently.


1974 ◽  
Vol 1 (2) ◽  
pp. 45-54 ◽  
Author(s):  
J. S. Rose

An analysis of 1000 consecutive treated cases from a private orthodontic practice was made. Inter alia the results show: the male to female ratio was 4: 6; the mean age of first attendance was 10·7 years and the mean age at the start of active treatment was 11·6 years. 49 per cent of the cases were Angle Class I; 39 per cent Class II/1; 8 per cent Class II/2 and 4 per cent Class III. Over half the patients had an increased overbite. 21 per cent had an anterior crossbite and 11 per cent showed a posterior crossbite. Approximately 75 per cent of the cases showed crowding of the labial segments. There was crowding in 26 per cent of the upper buccal segments and in 49 per cent of the lower ones. 93 per cent of the patients received active treatment for the upper arch but only 4 per cent had appliances in the lower arch. A quarter of the cases were treated without upper extractions; in the lower arch the figure was 58 per cent. 94.1 per cent of the patients were treated with removable appliances requiring, on average, 1·5 appliances per case to complete treatment. 30 per cent of the cases received no retention. 54 per cent wore a retainer for less than 6 months. 88 per cent of the patients completed treatment and co-operation was satisfactory in 87 per cent. The mean treatment period for each patient was 13·1 months involving an average of 11·7 visits. The average active treatment time for each patients was 95 minutes. 74 per cent of the completed cases had a satisfactory result. The discussion supports the case for relating the type of orthodontic treatment to the total dental need of the patient. This requires more knowledge of what is meant by “dental health”. A plea is made that orthodontists should not become rigid in their approach to treatment.


Sign in / Sign up

Export Citation Format

Share Document