Measurement of dynamic parameters of micromechanical thermistor converter using software and hardware complex NI Elvis II

2012 ◽  
Vol 16 (5) ◽  
pp. 5-12
Author(s):  
O.V. Borysov ◽  
B.I. Lupyna ◽  
I.S. Deineka
Keyword(s):  
Hardware Architecture ◽  
Dynamic Parameters ◽  
Software Complex ◽  
Hardware Complex ◽  
Software And Hardware

The dynamic parameters of micromechanical thermo-resistive directly heated converter are measured in different mediums. The hardware architecture of the designed automated stand on the base of the hardware-software complex NI Elvis II, software and user’s interface into LabVIEW environment are described. The results of thermo-resistive transducer’s characteristics measurement, received with theproposed stand, have analyzed

Development of software and hardware complex of operative diagnostics of structural part of 35-220 kV overhead lines operated in Northern regions of Western Siberia

2018 ◽  
pp. 69-77
Author(s):  
S. V. Grigorieva ◽  
A. V. Olshansky
Keyword(s):  
Western Siberia ◽  
Technical Condition ◽  
Structural Part ◽  
Software Complex ◽  
Overhead Lines ◽  
Far North ◽  
Hardware Complex ◽  
Northern Regions ◽  
Software And Hardware ◽  
Overhead Power Lines

The article is devoted to the problems of maintenance of overhead power lines in the Far North of Western Siberia. For improvement of quality and reliability of power supply of consumers in the conditions of the Far North of Western Siberia, decrease in operational costs and volumes of the carried-out emergency works the hardware-software complex for expeditious inspection, assessment and forecasting of change of technical condition of constructive part of air lines (VL) of 35-220 kV is developed, the structure of the hardware-software complex of registration of the condition of constructive part of VL of 35-220 kV and structure of the hardware-software complex of storage., processing and analysis of the obtained data on the States of the constructive part of the VL 35-220 kV. 

scholarly journals DEVELOPMENT OF CHARGING AND DISCHARGE SOFTWARE AND HARDWARE COMPLEX APPLICABLE FOR CHECKING BATTERIES OF SPACE VEHICLES

2020 ◽  
Vol 5 (5(74)) ◽  
pp. 67-71
Author(s):  
N.V. Suharev
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
Space Vehicles ◽  
Electrical Characteristics ◽  
Software Complex ◽  
Advantages And Disadvantages ◽  
Fifth Generation ◽  
Hardware Complex ◽  
Software And Hardware ◽  
Charge Discharge

Problem statement: Currently, there is a need in the space industry to actively improve the characteristics of battery batteries, the use of new types of batteries for power supply systems of spacecraft leads to a constant demand to improve the control and verification equipment (CPA). Depending on the improvement of storage batteries (AB) for spacecraft, the requirements for electrical inspections and control and verificationequipment were gradually changed. With the advent of lithium-ion batteries for spacecraft, there was a need to develop and manufacture a charge-discharge hardware and software complex (ZRPAK). The charge-discharge hardware-software complex designed to work as a charger-bit complex to work with AB spacecraft for all ground operation phases, to verify compliance of the electrical characteristics of the AB to the specified requirements, conduct incoming inspection and Autonomous tests of AB on the manufacturer of the spacecraft. The advantages and disadvantages of the previously developed and currently used control and verification equipment are analyzed. The electrical characteristics of the KPA of all generations of development are summarized in the table. Based on the analysis of the development of batteries, trends in the development of control and verification equipment and the fact that all spacecraft of new developments will use only lithium-ion batteries, the requirements for a promising fifth-generation ZRPAK are formulated. The following requirements are applied to the fifth-generation charge-discharge software and hardware complex: increase the charge-discharge voltage to 150 V; increase the charge -discharge current to 150 A; introduce devices for pre-charge-pre-discharge of the battery into the KPA; increase the accuracy of measuring the voltage of each battery; provide remote operation from the control PC; writing cyclograms; logging and subsequent viewing of all test data

scholarly journals Organization of railway track tamping work using the software and hardware complex SMTC

2018 ◽  
Vol 239 ◽  
pp. 04002 ◽  
Author(s):  
Aleksey Manakov ◽  
Sergey Kolarzh ◽  
Aleksey Mashkov
Keyword(s):  
Work Performance ◽  
Technical Condition ◽  
Railway Track ◽  
Railway Transport ◽  
Estimation Of Parameters ◽  
Software Complex ◽  
Hardware Complex ◽  
Software And Hardware ◽  
Complex Monitoring ◽  
Technical Operation

The main purpose of this work is to study the applicability of the hardware and software complex “Monitoring system for the technical condition of track equipment” to monitor the performance of track operations. The methodological base of study is formed on the basis of the analysis of scientific works of domestic and foreign scientists and the systematization of statistical data on the organization of the system of technical operation of track machines at enterprises of the West Siberian Railway. As a result of the study, it was proved that the functional of the system for remote monitoring of the technical condition of track equipment, which was developed by the specialists of the Siberian State Transport University, allows for continuous monitoring of the performance of track operations. Quality control of works is carried out on the basis of an estimation of parameters of functioning of working elements of the track equipment involved in the process of work performance. The application of the developed software and hardware complex allows significantly reducing the financial losses of railway transport enterprises associated with the repeated performance of track operations. The problems to be solved with the help of the proposed control system correspond to the priority areas of the Strategy for the Development of Railway Transport in the Russian Federation until 2030 in the development and implementation of means for automating control of infrastructure.

scholarly journals HARDWARE AND SOFTWARE COMPLEX FOR CREATION AND RESEARCH OF LOCOMOTION AND AUTONOMOUS MOTION CONTROL SYSTEMS FOR MOBILE ROBOTS

2021 ◽  
pp. 21-25
Author(s):  
A. S. Gorobtsov ◽  
A. E. Markov ◽  
P. S. Tarasov ◽  
A. V. Skorikov ◽  
A. V. Dianskiy ◽  
...  
Keyword(s):  
Mobile Robots ◽  
Control Systems ◽  
Motion Control ◽  
Control Laws ◽  
Software Complex ◽  
Hardware Complex ◽  
Problem Method ◽  
Software And Hardware ◽  
Using Data ◽  
Inverse Problem Method

A software and hardware complex for creation and research of control systems for mobile robots with walking and wheeled movers is presented. The synthesis of control laws is performed by the inverse problem method; Methods for connecting various SLAM algorithms, including those using data from computer vision devices, are considered.

scholarly journals PURPOSE AND DIRECTIONS OF MODERNIZATION OF THE HARDWARE-SOFTWARE COMPLEX «AUTOMATED INFORMATION COMPLEX OF EDUCATIONAL MANAGEMENT»

2020 ◽  
pp. 102-112
Author(s):  
Andrii Lytvynchuk ◽  
◽  
Andrii Kyrianov ◽  
Julia Irynevich ◽  
◽  
...  
Keyword(s):  
Information System ◽  
Labor Market ◽  
Relevant Information ◽  
Telecommunication System ◽  
Educational Management ◽  
Software Complex ◽  
Hardware Complex ◽  
Software And Hardware ◽  
Definition Of ◽  
Technology Identification

The article is designed to cover the directions for modernization of the Ukrainian software and hardware complex «Automated information complex of educational management» (modernized information and telecommunication system «State information system of education»). The approaches to further development of the software and hardware complex «Automated information complex of educational management» are highlighted. The main definition of the «Automated information complex of educational management» is revealed. The tools for modernization of the «Automated information complex of educational management», ways of introducing the principles of e-government in the field of education and expanding the range of relevant information services available to all stakeholders are identified. A list of the main tasks and modern requirements of the system is given. The algorithm of this system operation and the advantages of its use to identify the influence of education on a person’s condition in the labor market using the technology «identification of the educational trajectory of a person» is shown. The authors describe the main mechanisms of interaction of the software and hardware complex «Automated information complex of educational management» with other systems. It is proved that the use of such an information system in Ukraine will establish a closer link between the labor market and higher education, improve the mechanism of budget funding of educational institutions, the content of educational services and the process of their provision in order to obtain benefits in an adult’s life.

scholarly journals Physiological Aspects of the User's Immersion in the Virtual Reality Environment on the Example of Creating a Hardware-Software Complex for Smell Transmission

2020 ◽  
pp. paper3-1-paper3-12
Author(s):  
Artem Smolin ◽  
Konstantin Malyshev ◽  
Anna Spiridonova ◽  
Andrey Mironov ◽  
Aleksei Shchekoldin ◽  
...  
Keyword(s):  
Virtual Reality ◽  
Mixed Reality ◽  
Three Dimensional ◽  
Control Device ◽  
Virtual Reality Environment ◽  
Software Complex ◽  
Hardware Complex ◽  
Sensory Channel ◽  
Teachers And Students ◽  
Software And Hardware

This article discusses the use of prototypes of various technological devices to use odor sensory channel for higher immersion in virtual reality environments. Based on the results of research conducted by the teachers and students center of Usability and Mixed Reality at ITMO University, a prototype of a device for transmitting odors was developed. The article presents the concept and technological scheme of this device. The developed hardware and software complex consist of special platform based on a microcontroller (Arduino Nano) and a control device. The control device was built on the architecture of ARM, with the possibility of wireless connection. To control the air flow and odor supply from the tanks, it was selected a water pump, connections to the tanks is provided by with the help of special valves with a crane. In addition, for this software and hardware complex, a special three-dimensional location was modeled, as well as the design of the backpack and the scheme for its attachment.

scholarly journals The choice of semantic architecture segmentation of images for the prototype of a self-learning software and hardware complex of technical vision

2020 ◽  
pp. 68-72
Author(s):  
Р.К. Поляков ◽  
К.Г. Кузьминов ◽  
А.Б. Тристанов
Keyword(s):  
General Scheme ◽  
Semantic Segmentation ◽  
Training Sample ◽  
Software Complex ◽  
Hardware Complex ◽  
Technical Vision ◽  
Software And Hardware ◽  
Learning Software ◽  
Segmentation Of Images ◽  
Self Learning

В работе изложены результаты исследований авторов, предметом которых является семантическая сегментация изображений является одной из ключевых проблем в области компьютерного зрения. В статье обстоятельным образом раскрыты особенности выбора архитектуры семантической сегментации изображений для прототипа самообучающегося программно-аппаратного комплекса технического зрения. Авторами показаны существующие перспективные архитектуры и дана их сравнительная оценка. Дана сравнительная характеристики наиболее распространённых методов. Из всего многообразия архитектур как наиболее оптимальный был выбран Faster-R-CNN Inception v2 и разработана алгоритм и система, позволяющая использовать его непосредственно для анализа и классификации изображений жестяных банок по признаку герметичности. Приведена общая схема процесса подготовки обучающей выборки изображений. Описаны основные характеристики алгоритма анализа и классификации изображений жестяных банок по признаку герметичности для прототипа самообучающегося программно-аппаратного комплекса технического зрения. The paper presents the results of the authors' research, the subject of which is the semantic segmentation of images- one of the key problems in the field of computer vision. The article describes in details the features of the choice of the architecture of semantic image segmentation for the prototype of the self-learning hardware and software complex of technical vision. The authors show the existing promising architectures and give their comparative assessment. Comparative characteristics of the most common methods are given. Of the whole variety of architectures, Faster-R-CNN Inception v2 was chosen as the most optimal and an algorithm and system was developed that allows it to be used directly for analyzing and classifying images of cans based on tightness. The general scheme of the process of preparing a training sample of images is given. The main characteristics of the algorithm for analyzing and classifying images of cans based on tightness for a prototype of a self-learning software and hardware complex of technical vision are described.

SOFTWARE AND HARDWARE COMPLEX FOR INVESTIGATION OF METEOROLOGICAL RADAR ECHO

2010 ◽  
Vol 69 (17) ◽  
pp. 1517-1527 ◽  
Author(s):  
Ye. N. Belov ◽  
O. A. Voytovich ◽  
T. A. Makulina ◽  
G. A. Rudnev ◽  
G. I. Khlopov ◽  
...  
Keyword(s):  
Hardware Complex ◽  
Radar Echo ◽  
Software And Hardware ◽  
Meteorological Radar

scholarly journals Prospects for Blood Pressure Remote Monitoring in Hypertensive Patients in the Ryazan Region

2020 ◽  
Vol 15 (6) ◽  
pp. 795-801
Author(s):  
N. V. Aksenova ◽  
A. A. Nizov ◽  
O. N. Selyavina ◽  
E. I. Suchkova ◽  
E. V. Filippov
Keyword(s):  
Blood Pressure ◽  
Remote Monitoring ◽  
Medical Professional ◽  
Automatic Data ◽  
Hardware Complex ◽  
Software And Hardware ◽  
Monitoring Center ◽  
Clinically Significant ◽  
High Level ◽  
Attending Physician

Aim. To study the effectiveness and benefits of blood pressure (BP) remote monitoring in outpatients with hypertension.Material and methods. The study included 100 patients with a verified diagnosis of hypertension, who didn’t achieve target BP pressure levels. The patients measured their BP twice a day over 6 months with facilities with automatic data transmission over GSM-channel to a remote monitoring center. BP parameters were being transmitted online to the remote monitoring center, where they were being processed and transferred to the personal account planner (created by the Web interface based on the software and hardware complex) of the attending physician and operator of the remote monitoring center. It is important that doctor received information only on clinically significant measurement results, based on which he determined the urgency of contact with the patient and the further tactics of his management.Results. No malfunctions in the work of communication facilities, technical failures in the software and hardware complex were registered over the entire period of the study. After 6 months of the monitoring it was possible to achieve target BP levels less than 135/85 mm Hg in 70% of patients. The proportion of patients with a high level of normal BP increased from 10% to 19%, while the proportion of patients with grade 1 and 2 of hypertension decreased significantly (from 33% to 7% and from 54% to 3%, respectively). At the beginning of telemedicine monitoring 3% of patients had stage 3 of hypertension, at the end of the study – 1%.Conclusion. The technology of telemedicine monitoring has shown itself as a simple, affordable and reliable way of management of outpatients with hypertension in conditions of real clinical practice. It was possible to achieve BP levels less than 135/85 mm Hg in 70% of patients by the method of remote outpatient monitoring. BP remote monitoring changed fundamentally the decision-making strategy of the patients management: it was not the patient who independently determined the need for consultation with a medical professional, but the attending physician made a decision on the method and urgency of contact with the patient on the basis of the data of objective monitoring indicators.

Sign in / Sign up

Export Citation Format

Share Document