scholarly journals Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process

2018 ◽  
Author(s):  
Vladimir Kuznetsov ◽  
Alexey Solonin ◽  
Oleg Urzhumtcev ◽  
Azamat Tavitov ◽  
Richard Schilling
Keyword(s):  
3D Printing ◽  
Significant Influence ◽  
Assessment Method ◽  
Geometrical Parameters ◽  
3D Printer ◽  
Three Point Bending ◽  
Geometric Process ◽  
Fused Deposition ◽  
3D Printers ◽  
Deposition Technology

The current paper is studying the influence of geometrical parameters of the FDM (FFF) 3D printing process on printed part strength for open source desktop 3D printers and the most popular material used for that purpose, i.e. PLA (polylactic acid). The study was conducted using a set of different nozzles (0.4, 0.6 and 0.8 mm) and a range of layer heights from the minimum to maximum physical limits of the machine. To assess print strength, a novel assessment method is proposed. A tubular sample is loaded in the weakest direction (across layers) in a three-point bending fixture. To explain the results obtained, a mesostructure evaluation through SEM scans of the samples were used. A significant influence of geometric process parameters was detected on sample mesostructure and, consequently, on sample strength.

scholarly journals Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process

Polymers ◽  
2018 ◽  
Vol 10 (3) ◽  
pp. 313 ◽  
Author(s):  
Vladimir Kuznetsov ◽  
Alexey Solonin ◽  
Oleg Urzhumtsev ◽  
Richard Schilling ◽  
Azamat Tavitov
Keyword(s):  
Geometrical Parameters ◽  
3D Printer ◽  
Fused Deposition ◽  
Deposition Technology

Towards an ultra-affordable 3D bioprinter: A Heated Inductive-Enabled Syringe Pump Extrusion (HISPE) multifunction module for open-source FDM 3D printers

2021 ◽  
pp. 1-31
Author(s):  
Lamis R. Darwish ◽  
Mohamed T. El-Wakad ◽  
Mahmoud Farag
Keyword(s):  
3D Printing ◽  
Open Source ◽  
Fused Deposition Modeling ◽  
Cost Effective ◽  
3D Printer ◽  
Syringe Pump ◽  
Fused Deposition ◽  
Filament Diameter ◽  
3D Printers ◽  
Deposition Modeling

Abstract The extrusion systems of the widespread Fused Deposition Modeling (FDM) 3D printers enable printing only with materials in the filament form. This property hinders the usage of these FDM 3D printers in many fields where the printing materials are in forms other than filaments. Thus, this paper proposes a Heated Inductive-enabled Syringe Pump Extrusion (HISPE) multifunction open-source module with a potential application in bioprinting (i.e., extrusion-based bioprinting). The proposed HISPE module is designed to be cost-effective, simple, and easy to replicate. It is capable of replacing the conventional extrusion system of any open-source cartesian FDM 3D printer. This module widens both the range of the FDM 3D printing materials (e.g., bioinks, biopolymers, blends of materials, or composites) and their forms (e.g., hydrogels, powder, pellets, or flakes). The capabilities of the proposed module were investigated through 3D printing bone scaffolds with a filament diameter of 400 µm and pore size of 350 µm by a Polycaprolactone (PCL) biodegradable polymer in the pellets form. The morphological accuracy of the printed scaffolds was investigated by SEM. The investigation results confirm the accurateness of the proposed HISPE module in printing high-precision models.

scholarly journals Foundation Piles—A New Feature for Concrete 3D Printers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2545
Author(s):  
Marcin Hoffmann ◽  
Krzysztof Żarkiewicz ◽  
Adam Zieliński ◽  
Szymon Skibicki ◽  
Łukasz Marchewka
Keyword(s):  
3D Printing ◽  
Rapid Development ◽  
Construction Materials ◽  
Shallow Foundation ◽  
Soil Reinforcement ◽  
3D Printer ◽  
Permanent Formwork ◽  
3D Printers ◽  
New Feature ◽  
The Cost

Foundation piles that are made by concrete 3D printers constitute a new alternative way of founding buildings constructed using incremental technology. We are currently observing very rapid development of incremental technology for the construction industry. The systems that are used for 3D printing with the application of construction materials make it possible to form permanent formwork for strip foundations, construct load-bearing walls and partition walls, and prefabricate elements, such as stairs, lintels, and ceilings. 3D printing systems do not offer soil reinforcement by making piles. The paper presents the possibility of making concrete foundation piles in laboratory conditions using a concrete 3D printer. The paper shows the tools and procedure for pile pumping. An experiment for measuring pile bearing capacity is described and an example of a pile deployment model under a foundation is described. The results of the tests and analytical calculations have shown that the displacement piles demonstrate less settlement when compared to the analysed shallow foundation. The authors indicate that it is possible to replace the shallow foundation with a series of piles combined with a printed wall without locally widening it. This type of foundation can be used for the foundation of low-rise buildings, such as detached houses. Estimated calculations have shown that the possibility of making foundation piles by a 3D printer will reduce the cost of making foundations by shortening the time of execution of works and reducing the consumption of construction materials.

scholarly journals Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 523 ◽  
Author(s):  
Wei Goh ◽  
Michinao Hashimoto
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Microfluidic Devices ◽  
High Impact ◽  
3D Printer ◽  
Original Design ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Indispensable Tool ◽  
Single Material

Fused deposition modeling (FDM) has become an indispensable tool for 3D printing of molds used for sacrificial molding to fabricate microfluidic devices. The freedom of design of a mold is, however, restricted to the capabilities of the 3D printer and associated materials. Although FDM has been used to create a sacrificial mold made with polyvinyl alcohol (PVA) to produce 3D microchannels, microchannels with free-hanging geometries are still difficult to achieve. Herein, dual sacrificial molding was devised to fabricate microchannels with overhang or helical features in PDMS using two complementary materials. The method uses an FDM 3D printer equipped with two extruders and filaments made of high- impact polystyrene (HIPS) and PVA. HIPS was initially removed in limonene to reveal the PVA mold harboring the design of microchannels. The PVA mold was embedded in PDMS and subsequently removed in water to create microchannels with 3D geometries such as dual helices and multilayer pyramidal networks. The complementary pairing of the HIPS and PVA filaments during printing facilitated the support of suspended features of the PVA mold. The PVA mold was robust and retained the original design after the exposure to limonene. The resilience of the technique demonstrated here allows us to create microchannels with geometries not attainable with sacrificial molding with a mold printed with a single material.

scholarly journals Implementing a 3D printing service in a biomedical library

2017 ◽  
Vol 105 (1) ◽  
Author(s):  
Verma Walker, MLIS
Keyword(s):  
Problem Solving ◽  
3D Printing ◽  
3D Modeling ◽  
Three Dimensional ◽  
National Institutes Of Health ◽  
3D Printer ◽  
Service Model ◽  
Steep Learning Curve ◽  
3D Printers ◽  
Creative Problem

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work.

Employing 3D Printing to Fabricate Augmented Reality Headsets for Middle School STEM Education

2019 ◽  
pp. 241-261
Author(s):  
Daniel A. Tillman ◽  
Ross C. Teller ◽  
Paul E. Perez ◽  
Song A. An
Keyword(s):  
Middle School ◽  
Middle School Students ◽  
Augmented Reality ◽  
3D Printing ◽  
Learning Science ◽  
3D Printer ◽  
School Students ◽  
Mathematics Content Knowledge ◽  
3D Printers ◽  
And Mathematics

This chapter examines the theories, strategies, and techniques for employing 3D printing technologies to fabricate education-appropriate augmented reality (AR) headsets and provides a concrete example of an AR headset that the authors developed. The chapter begins by discussing theories and historically relevant events that provide a context for the chapter's narrative about use of 3D printers to support AR in education. Next, the chapter presents the strategies that were employed while developing and 3D fabricating a custom-designed AR headset that was intended for supporting middle school students learning science and mathematics content knowledge. Afterward, the chapter provides directions and resources for the reader describing how to build the presented AR headset design themselves by using a 3D printer and affordable electronic components, as well as information about how to join the Maker community and participate in the designing and producing of similar projects. Lastly, the chapter delivers a summarization of all findings discussed.

A Heuristic Scaling Strategy for Multi-Robot Cooperative Three-Dimensional Printing

2020 ◽  
Vol 20 (4) ◽  
Author(s):  
Laxmi Poudel ◽  
Chandler Blair ◽  
Jace McPherson ◽  
Zhenghui Sha ◽  
Wenchao Zhou
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Evaluation Framework ◽  
Geometric Constraints ◽  
Mathematical Representation ◽  
Printing Process ◽  
Fused Deposition ◽  
3D Printers ◽  
Printing Time

Abstract While three-dimensional (3D) printing has been making significant strides over the past decades, it still trails behind mainstream manufacturing due to its lack of scalability in both print size and print speed. Cooperative 3D printing (C3DP) is an emerging technology that holds the promise to mitigate both of these issues by having a swarm of printhead-carrying mobile robots working together to finish a single print job cooperatively. In our previous work, we have developed a chunk-based printing strategy to enable the cooperative 3D printing with two fused deposition modeling (FDM) mobile 3D printers, which allows each of them to print one chunk at a time without interfering with the other and the printed part. In this paper, we present a novel method in discretizing the continuous 3D printing process, where the desired part is discretized into chunks, resulting in multi-stage 3D printing process. In addition, the key contribution of this study is the first working scaling strategy for cooperative 3D printing based on simple heuristics, called scalable parallel arrays of robots for 3DP (SPAR3), which enables many mobile 3D printers to work together to reduce the total printing time for large prints. In order to evaluate the performance of the printing strategy, a framework is developed based on directed dependency tree (DDT), which provides a mathematical and graphical description of dependency relationships and sequence of printing tasks. The graph-based framework can be used to estimate the total print time for a given print strategy. Along with the time evaluation metric, the developed framework provides us with a mathematical representation of geometric constraints that are temporospatially dynamic and need to be satisfied in order to achieve collision-free printing for any C3DP strategy. The DDT-based evaluation framework is then used to evaluate the proposed SPAR3 strategy. The results validate the SPAR3 as a collision-free strategy that can significantly shorten the printing time (about 11 times faster with 16 robots for the demonstrated examples) in comparison with the traditional 3D printing with single printhead.

FDM 3D Printing Technology in Manufacturing Composite Elements

2013 ◽  
Vol 58 (4) ◽  
pp. 1415-1418 ◽  
Author(s):  
P. Dudek
Keyword(s):  
Composite Materials ◽  
3D Printing ◽  
Manufacturing Systems ◽  
Fused Deposition Modelling ◽  
3D Printer ◽  
New Materials ◽  
Fused Deposition ◽  
Material Deposition ◽  
Feedstock Production ◽  
And Robotics

Abstract In recent years, FDM technology (Fused Deposition Modelling) has become one of the most widely-used rapid prototyping methods for various applications. This method is based on fused fibre material deposition on a drop-down platform, which offers the opportunity to design and introduce new materials, including composites. The material most commonly used in FDM is ABS, followed by PC, PLA, PPSF, ULTEM9085 and mixtures thereof. Recently, work has been done on the possibility of applying ABS blends: steel powders, aluminium, or even wood ash. Unfortunately, most modern commercial systems are closed, preventing the use of any materials other than those of the manufacturer. For this reason, the Department of Manufacturing Systems (KSW) of AGH University of Science and Technology, Faculty of Mechanical Engineering And Robotics purchased a 3D printer with feeding material from trays reel, which allows for the use of other materials. In addition, a feedstock production system for the 3D printer has been developed and work has started on the creation of new composite materials utilising ceramics.

scholarly journals PENENTUAN SETTING OPTIMAL MESIN 3D PRINTER BERBASIS FUSED DEPOSITION MODELING MENGGUNAKAN METODE TAGUCHI

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Anggit Prakasa ◽  
Setya Permana Sutisna ◽  
Anton Royanto Ahmad
Keyword(s):  
Experimental Design ◽  
Taguchi Method ◽  
Fused Deposition Modeling ◽  
Dimensional Accuracy ◽  
High Accuracy ◽  
3D Printer ◽  
Fused Deposition ◽  
3D Printers ◽  
Optimal Setting ◽  
Deposition Modeling

<p>The 3D printers process is applied to create prototype components, but at the last 3D Printers are often applied as last products. So, high accuracy is required in this case. In this research will find the optimal<br />setting of the dimensional accuracy 3D printers based fused deposition modeling. The method used is<br />the Taguchi method, the reason for using this method its efficiency, this is because the Orthogonal<br />Array matrix requires less number of experiments than the classical experimental design. Analysis of<br />Variance is also needed in this method to see the factors that significantly influence the response<br />variable. The results of this study indicate that the factors that significantly influence is printspeed by<br />contributing 53.08%, flowrate contributes 16.4%, and temperature heater block contributes 3.85% and<br />optimal setting is temperature heater block 190º, print speed 60mm/s and flowrate 6.28 mm3/s. (A1,<br />C3 dan D2).</p>

Sign in / Sign up

Export Citation Format

Share Document