scholarly journals Characterization of Binding Sites and Optimization of Cell Free Bacteria Condition for Metal Bio-Sorbents

2021 ◽  
Author(s):  
Dr. Mostafa G. Fadl ◽  
Zenat Kamel Mohamed
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Binding Sites ◽  
Metal Uptake ◽  
High Efficiency ◽  
Bacterial Biomass ◽  
Resistant Bacteria ◽  
Bacterial Cells ◽  
Isolation And Identification ◽  
Charge Interaction

Bacteria a Microscopic organisms are the most inexhaustible and flexible of microorganisms and constitute a huge division of the whole living earthly biomass, certain microorganisms were found to amass metallic components at a high limit Was Known as Bacterial Bio-sorption Due to their little size, capacity to become under controlled conditions, and their Accommodation to an extensive variety of ecological situations; Potent metal bio-sorbents among microorganisms, at low pH esteems, cell divider ligands are protonated and contend essentially with metals for official. With expanding pH, more ligands, such as amino and carboxyl groups, could be exposed, leading to attraction between these negative charges and the metals, and consequently increment bio-sorption onto the cell surface. Starting with Isolation and identification of heavy metal-resistant bacteria from rock Ore. Studying Factors Affecting Uranium Bio-sorption, Optimization of bacterial growth conditions and optimum for metal uptake by free and immobilized bacterial cells and Desorption ratio of uranium ions adsorbed by Coli. /alginate, All this evidence suggest that functions groups Represented in our study are responsible for metal uptake in our bacterial biomass beside change in peaks position which assigned for it's groups confirm bio-sorption of metal ions from waste due to ions charge interaction comparing with immobilized we found increase in no of binding sites indicate that immobilized bacterial have high efficiency for metal up take which also change in peaks position which assigned for its groups confirm bio-sorption of metal ions from waste due to ions charge interaction, Where the high bio-sorption yield obtained by bacteria, the Uranium & heavy metal bioremediation process expects microorganisms to be joined to a strong surface.

scholarly journals Relationship Between Immobilization of Cells and Characterization of Binding Sites and of Cell-Free Bacteria and Immobilized Metal Biosorbents

2021 ◽  
Author(s):  
Mostafa G. Fadl ◽  
Zenat Kamel Mohamed
Keyword(s):  
Metal Ions ◽  
Binding Sites ◽  
Metal Uptake ◽  
High Efficiency ◽  
Immobilized Cells ◽  
Bacterial Biomass ◽  
Resistant Bacteria ◽  
Bacterial Cells ◽  
Isolation And Identification ◽  
Charge Interaction

Abstract Cell immobilization is preferred. Immobilized cells have been traditionally used for the treatment of sewage. The techniques employed for immobilization of cells are almost the same as those used for immobilization of enzymes with appropriate modifications. Entrapment and surface attachment techniques are commonly used. Gels, and to some extent membranes, are employed. Certain microorganisms were found to amass metallic components at a high limit Was Known as Bacterial Biosorption, Potent metal biosorbents among microorganisms, at low pH esteems, cell divider ligands are protonated and contend essentially with metals for official. With expanding pH, more ligands, such as amino and carboxyl groups, could be exposed, leading to attraction between these negative charges and the metals and consequently incremental biosorption onto the cell surface. Starting with isolation and identification of heavy metal-resistant bacteria from rock ore. Studying Factors Affecting Uranium Biosorption, Optimization of bacterial growth conditions and optimum for metal uptake by free and immobilized bacterial cells. All this evidence suggest that functions groups Represented in our study are responsible for metal uptake in our bacterial biomass beside change in peaks position which assigned for its groups confirm biosorption of metal ions from waste due to ions charge interaction comparing with immobilized we found increase in no of binding sites indicate that immobilized bacterial have high efficiency for metal up take which also change in peaks position which assigned for its groups confirm biosorption of metal ions from waste due to ions charge interaction, Where the high biosorption yield obtained by bacteria.

scholarly journals α-Lactalbumin, Amazing Calcium-Binding Protein

Biomolecules ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1210
Author(s):  
Eugene A. Permyakov
Keyword(s):  
Oleic Acid ◽  
Metal Ions ◽  
Metal Binding ◽  
Binding Sites ◽  
Calcium Binding ◽  
Amyloid Fibrils ◽  
Binding Protein ◽  
Molten Globule ◽  
Bacterial Cells ◽  
Practical Applications

α-Lactalbumin (α-LA) is a small (Mr 14,200), acidic (pI 4–5), Ca2+-binding protein. α-LA is a regulatory component of lactose synthase enzyme system functioning in the lactating mammary gland. The protein possesses a single strong Ca2+-binding site, which can also bind Mg2+, Mn2+, Na+, K+, and some other metal cations. It contains several distinct Zn2+-binding sites. Physical properties of α-LA strongly depend on the occupation of its metal binding sites by metal ions. In the absence of bound metal ions, α-LA is in the molten globule-like state. The binding of metal ions, and especially of Ca2+, increases stability of α-LA against the action of heat, various denaturing agents and proteases, while the binding of Zn2+ to the Ca2+-loaded protein decreases its stability and causes its aggregation. At pH 2, the protein is in the classical molten globule state. α-LA can associate with membranes at neutral or slightly acidic pH at physiological temperatures. Depending on external conditions, α-LA can form amyloid fibrils, amorphous aggregates, nanoparticles, and nanotubes. Some of these aggregated states of α-LA can be used in practical applications such as drug delivery to tissues and organs. α-LA and some of its fragments possess bactericidal and antiviral activities. Complexes of partially unfolded α-LA with oleic acid are cytotoxic to various tumor and bacterial cells. α-LA in the cytotoxic complexes plays a role of a delivery carrier of cytotoxic fatty acid molecules into tumor and bacterial cells across the cell membrane. Perhaps in the future the complexes of α-LA with oleic acid will be used for development of new anti-cancer drugs.

Removal of lead(II) and copper(II) from aqueous solution using foitite from Linshou mine in Hebei, China

2011 ◽  
Vol 64 (8) ◽  
pp. 1620-1628 ◽  
Author(s):  
Dengliang He ◽  
Guangfu Yin ◽  
Faqin Dong ◽  
Laibao Liu ◽  
Xiaoli Tan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Metal Uptake ◽  
Energy Dispersive Spectrometer ◽  
Hebei Province ◽  
X Ray Diffraction ◽  
X Ray ◽  
Laser Raman

Foitite from Linshou mine in China's Hebei province was investigated as an adsorbent to remove Pb(II) and Cu(II) from aqueous solution. The results showed that foitite can readily remove heavy metal ions from aqueous solution. The data shows that the metal uptake for Pb(II) increases rapidly, accounting for 74.47% when contact time was 2 min. In contrast to Pb(II), there was a worse capability for adsorption of Cu(II). In the first 4 min, the metal uptake accounted for 34.7%. According to the analytical results obtained from X-ray diffraction, laser Raman spectrum, X-ray energy dispersive spectrometer, and Zeta potential, the removal mechanism of Pb(II) and Cu(II) by using foitite can be explained as following: firstly, the existence of an electrostatic field around foitite particles can attract heavy metal ions and consequently combine heavy metal ions with OH−; secondly, heavy metal ions in the solution are exchanged with the Fe3+ and Al3+ in the foitite.

scholarly journals Novel Mixed Matrix Membranes Based on Polymer of Intrinsic Microporosity PIM-1 Modified with Metal-Organic Frameworks for Removal of Heavy Metal Ions and Food Dyes by Nanofiltration

Membranes ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 14
Author(s):  
Anna Kuzminova ◽  
Mariia Dmitrenko ◽  
Andrey Zolotarev ◽  
Aleksandra Korniak ◽  
Daria Poloneeva ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
High Efficiency ◽  
Metal Organic Frameworks ◽  
Mixed Matrix Membranes ◽  
Polymer Of Intrinsic Microporosity ◽  
Food Dyes ◽  
Metal Organic ◽  
Intrinsic Microporosity

Nowadays, nanofiltration is widely used for water treatment due to its advantages, such as energy-saving, sustainability, high efficiency, and compact equipment. In the present work, novel nanofiltration membranes based on the polymer of intrinsic microporosity PIM-1 modified by metal-organic frameworks (MOFs)—MIL-140A and MIL-125—were developed to increase nanofiltration efficiency for the removal of heavy metal ions and dyes. The structural and physicochemical properties of the developed PIM-1 and PIM-1/MOFs membranes were studied by the spectroscopic technique (FTIR), microscopic methods (SEM and AFM), and contact angle measurement. Transport properties of the developed PIM-1 and PIM-1/MOFs membranes were evaluated in the nanofiltration of the model and real mixtures containing food dyes and heavy metal ions. It was found that the introduction of MOFs (MIL-140A and MIL-125) led to an increase in membrane permeability. It was demonstrated that the membranes could be used to remove and concentrate the food dyes and heavy metal ions from model and real mixtures.

scholarly journals Characterization and application of biosorbents modified with TiO2 for heavy metal ions removal

2016 ◽  
Vol 14 (2) ◽  
pp. 79-87 ◽  
Author(s):  
Nena Velinov ◽  
Miljana Radovic ◽  
Aleksandra Zarubica ◽  
Aleksandar Bojic
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Bacterial Biomass ◽  
Sorption Process ◽  
Promising Alternative ◽  
Maximum Sorption ◽  
Heavy Metal Ions Removal

Preparation, characterization and application of materials modified with TiO2 nanoparticle have been reviewed. Chitosan, bacterial biomass and dendrimers were the starting material for modification. Sorbents characterization was performed by scanning electron microscopy (SEM). In order to investigate the sorption capabilities of sorbents, we used them for removal of heavy metal ions from aqueous solution. The effect of contact time on heavy metal ions sorption and maximum sorption capacities of biosorbents are shown. As a very important parameter of the sorption process, the effect of initial pH values on heavy metal removal was examined. This paper indicates that sorption using the material modified with TiO2 is becoming a promising alternative to conventional adsorbents in removing heavy metal ions.

Sign in / Sign up

Export Citation Format

Share Document