scholarly journals Inokulasi Rhizobium dan Populasi Tanaman terhadap Pertumbuhan dan Hasil Kedelai pada Sistem Tanpa Olah Tanah

2019 ◽  
Vol 3 (2) ◽  
pp. 80
Author(s):  
Aldhera Nanda Augusta ◽  
Supriyono Supriyono ◽  
Sri Nyoto
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Index Number ◽  
N Fixation ◽  
Area Index ◽  
Plant Weight ◽  
Rhizobium Inoculation ◽  
Number Of Leaves ◽  
Pod Number

One of the factors of less soybean productivity of in Indonesia is caused by the N fixation. It can decrease the growth and the yield of soybean. One of the methods to overcome the N fixation is by rhizobium inoculation. The aim of this research was to observe the effects of rhizobium inoculation dosage and the number of seed per hole (population) to the growth and yield of soybean. The method used was Split Plot Randomized Completely Block Design (RCBD). The treatments were type of inoculant rhizobium dosage: without treatment, 3 and 6 g kg<sup>-1</sup> as well as the number of plants, 2 and 3 on planting pit. The result showed that the lowest plant height was in soybean without inoculated by rhizobium and 3 plants per planting pit. The lowest branches number was three plants per planting pit when compared than 2 plants on planting pit. Rhizobium inoculation was not significant to affect the number of leaves, number of branches, leaf area index, number of beans per pod, number of pods per plant, weight of 100 seeds, fresh weight, dry weight and yield.

scholarly journals Growth And Yield of Sorghum (Sorghum bicolor (L.) Moench) Varities in Sokoto Sudan Savanna of Nigeria

2021 ◽  
Vol 25 (8) ◽  
pp. 1513-1518
Author(s):  
A.S. Gunu ◽  
M. Musa
Keyword(s):  
Leaf Area ◽  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Area Index ◽  
Days To Heading ◽  
Number Of Leaves ◽  
Total Dry Weight ◽  
Sudan Savanna ◽  
Stalk Weight

Field trial was carried out during the 2019 rainy season (June to October) at the Dryland Teaching and Research Farm of the Faculty of Agriculture, Usmanu Danfodiyo University, Sokoto to determine the growth and yield of sorghum varieties in the study area. The treatments consisted of five (5) sorghum varieties (Samsorg 45, Samsorg 46, Janjari, Yartawa and Jardawa), the treatments were laid out in a Randomized Complete Block Design (RCBD) replicated three (3) times. Data were collected on the growth and yield of the crop. Janjari and Jardawa varieties were higher in plant height. Jardawa and Yartawa varieties were higher in number of leaves. Janjari and Yartawa varieties were higher in total dry weight. Janjari, Jardawa and Yartawa varieties were higher in harvest index. Yartawa variety was higher in leaf area, leaf area index and 1000-grain weight. Jardawa variety was higher in panicle length. Janjari variety was early in number of days to heading, flowering, and maturity and was higher in dry stalk weight. The grain yield (249 – 1506kg ha-1 ) was higher in Janjari and Yartawa varieties (1268 – 1506 kg ha-1). Based on the findings of this research, it could be concluded that Janjari and Yartawa varieties performed better than other varieties in the study area.

scholarly journals PERTUMBUHAN DAN PRODUKSI TANAMAN JAGUNG PROLIFIK PADA BERBAGAI JARAK TANAM DALAM BARIS DENGAN SISTEM TANAM JAJAR LEGOWO

2020 ◽  
Vol 4 (1) ◽  
pp. 13-23
Author(s):  
Intan Dwi Lestari
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Block Design ◽  
Stem Diameter ◽  
Growth And Yield ◽  
Area Index ◽  
Plant Weight ◽  
South Sulawesi ◽  
Randomized Block Design ◽  
Number Of Leaves

This research aimed to determine the effect of spacing on the growth and yield of corn. It was conducted from July to November 2019 at the Experimental Plantation of Cereal Crops Research Institute (BalitSereal), Maros, South Sulawesi. The experimental method used was a randomized block design consisting of 4 treatments: J1= (100 cm x 50 cm) x 20 cm, one seed per hole; J2= (100 cm x 50 cm) x 30 cm, alternating between one seed per hole and two seeds per hole; J3= (100 cm x 50 cm) x 40 cm, two seeds per hole; J4= (100 cm x 50 cm) x 15 cm, one seed per hole. The observed variables were plant height, number of leaves, stem diameter, leaf area index, Anthesis Silking Interval (ASI), length of cob 1 and cob 2, diameter of cob 1 and cob 2, weight of shelled seeds/plant, weight of 100 seeds on cob 1 and cob 2, and production of shelled seeds/hectare. The experimental results showed that plant spacing affected the growth and production of maize. The J3 spacing (100 cm x 50 cm) x 40 cm with two seeds per hole significantly affected the leaf area index and gave the highest average stem diameter. The J2 spacing with (100 cm x 50 cm) x 30 cm with alternating between one seed per hole and two seeds per hole produced the highest production in terms of weight of shelled seeds/plant, weight of 100 seeds and yield of shelled seeds/hectare.

scholarly journals Pengaruh Ukuran Siung dan Jarak Tanam terhadap Pertumbuhan dan Hasil Bawang Putih Varietas Lumbu Hijau

2020 ◽  
Vol 4 (1) ◽  
pp. 6
Author(s):  
Agnofi Merdeka Efendi ◽  
Indrawan Fahmi ◽  
Samanhudi Samanhudi ◽  
Edi Purwanto
Keyword(s):  
Plant Height ◽  
Higher Plants ◽  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Plant Weight ◽  
Cultivation Technology ◽  
Number Of Leaves ◽  
Effect On Yield ◽  
Planting Distance

<p class="Abstract">The effort to increase garlic productivity through improvement of cultivation technology. This study aimed to determine the proper size of cloves and planting distance thus resulting in the best growth and yield of garlic var. Lumbu Hijau. This study was conducted in April-September 2018 in Horticulture Seed Garden Tawangmangu, Karanganyar. This method used was Randomized Complete Block Design (RCBD) factorial with 2 factors, namely clove size (large, medium, and small) and planting distance (10 cm x 10 cm, 12.5 cm x 12.5 cm, 10 cm x 15 cm). The result showed that the size of cloves had significant effect on plant height, number of leaves, plant dry weight and yield. Planting distance had significant effect on yield. The use of large sized cloves (diameter 19-35 mm) increased plant height, number of leaves, plant dry weight and yield of garlic var. Lumbu Hijau. Maximum garlic yields on spacing of 10 cm x 10 cm. The combination of the size of the cloves with spacing affected plant height, plant weight and the yield of garlic. The greater the size of the cloves with the wider planting distance causing higher plants. The smaller the size of the cloves with a wider spacing causing low garlic yield.</p>

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

scholarly journals Effect of Foliar Application of Growth Regulators on Vegetative and Physiological Growth Parameters in Ajowan (Trachyspermum ammi L. Sprague)

2020 ◽  
pp. 100-109
Author(s):  
Y. Rajasekhara Reddy ◽  
G. Ramanandam ◽  
P. Subbaramamma ◽  
A. V. D. Dorajeerao
Keyword(s):  
Leaf Area ◽  
Foliar Application ◽  
Growth Parameters ◽  
Block Design ◽  
Foliar Spray ◽  
Dry Weight ◽  
Area Index ◽  
Chlorophyll Contents ◽  
Trachyspermum Ammi ◽  
Number Of Leaves

A field experiment was carried out during rabi season of 2018-2019, at college farm, College of Horticulture, Dr. Y.S.R. Horticultural University, Venkataramannagudem, West Godavari District, Andhra Pradesh. The experiment was laidout in a Randomised Block Design with eleven treatments (viz., T1- NAA @ 50 ppm, T2-NAA @ 100 ppm, T3-GA3 @ 50 ppm,  T4-GA3 @ 100 ppm, T5-Thiourea @ 250 ppm, T6-Thiourea @ 500 ppm, T7-28-Homobrassinolide @ 0.1 ppm, T8-28-Homobrassinolide @ 0.2 ppm, T9-Triacontinol @ 2.5 ppm, T10-Triacontinol @ 5 ppm, T11-(Control) Water spray) and three replications. The treatments were imposed at 30 and 45 DAT in the form of foliar spray. Foliar application of GA3@ 100 ppm (T4) had recorded the maximum plant height (108.20 cm), leaf area (9.53 cm2) and leaf area index (0.74). Foliar application of thiourea @ 250 ppm (T5) had recorded the maximum values with respect to number of primary branches (15.03 plant-1), number of secondary branches (83.40 plant-1), plant spread (1793 cm2 plant-1), fresh weight (376.29 g plant-1), dry weight (103.54 g plant-1) and number of leaves plant-1((298.8). The same treatment (T5) had recorded the highest values with respect to crop growth rate (1.44 gm-2d-1), chlorophyll-a (1.40 mg g-1), chlorophyll-b (0.076 mg g-1) and total chlorophyll contents (1.48 mg g-1) in the leaves.

scholarly journals The Effects of Organic Fertilizer and Planting Type on Growth and Yield of Curcuma aromatica

2021 ◽  
Author(s):  
Trinh Thi Ben ◽  
Le Nguyen Tu Linh ◽  
Tran Thi Linh Giang ◽  
Vu Quang Dao ◽  
Nguyen Thi Tu Oanh ◽  
...  
Keyword(s):  
Surface Coating ◽  
Raw Materials ◽  
Block Design ◽  
Organic Fertilizer ◽  
Dry Weight ◽  
Content Area ◽  
Growth And Yield ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Effect Of Surface

Background: Curcuma aromatica Salisb is an important medicinal herb in Vietnam. It is exploited naturally, so its production is limited and in danger of extinction. Studying an organic farming model is a necessary orientation to exploit, conserve and provide quality raw materials. Methods: The present study was conducted to investigate the effect of surface coating types (A1: without coating, A2: straw coating and A3: polymer coating) and organic fertilizer amount (B1: 0; B1: 15, B2: 20, B3: 25 and B4: 30 ton ha-1) on growth and yield of Curcuma aromatica Salisb. The experiment was designed in a factorial randomized complete block design (RCBD) with three replications. The traits studied were: survival plant’s rate (%), leaf area (cm2), plant height (cm), number of leaves, fresh weight (g/plant), dry weight (g/plant), phenolic content/area (mg/20 m2), curcumol content/area (mg/20 m2). Result: The results of the experiment revealed that surface coating types and organic fertilization and their interaction were significant in growth and yield of Curcuma aromatica Salisb.

scholarly journals PENGARUH LAMA PERENDAMAN AIR KELAPA TERHADAP PERTUMBUHAN DAN HASIL TANAMAN BAWANG MERAH (Allium ascalonicum. L) PADA BERBAGAI MACAM MEDIA

2019 ◽  
Vol 13 (1) ◽  
pp. 33-44
Author(s):  
Fendi Ramdhani
Keyword(s):  
Water Immersion ◽  
Block Design ◽  
Dry Weight ◽  
Coconut Water ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Number Of Shoots

Demand for shallots continues to increase due to increasing population and consumption of mera onions. This research was carried out in jingglong village, Sutojayan sub-district, Blitar district in April - June 2018. This research was conducted using factorial randomized block design (RBD) with 2 factors, the first factor was immersion in coconut water (k) which consisted of 3 levels namely immersion for 1 hour (k1) soaking for 2 hours (k2) soaking for 3 hours (k3). The second factor is various media (m) consisting of 3 levels: soil 1: fertilizer 1: husk ash 1 (m1), soil 2: fertilizer 1: husk ash 1 (m2), soil 1: fertilizer 2: husk ash 1 ( m3) The variables observed included plant height, number of shoots, number of leaves, weight of tuber stover, wet weight of tubers, dry weight of tubers. Data were analyzed using analysis of variance (ANOVA) level of 5% and further testing with Duncan's Multiple Range Test (DMRT). There is no real interaction between coconut water immersion and various planting media on the growth and yield of shallots. The treatment of coconut water immersion (k) significantly affected the height of shallot plants at the age of 14 days and 21 days, and affected the number of shoots and leaves at all ages of observation. The treatment of various planting media showed a significant difference at the age of 14 days to 21 days. The treatment of various planting media had a significant effect on the weight of stover and the wet weight of onion tubers with the highest yield (m1) of 122.03 gr, while in the wet weight the highest yield was on media (m1) with a yield of 80.51 gr.

scholarly journals Influence of Sowing Date on Growth and Yield Components of Sunflower (Helianthus Annuus L.) in Semi-Arid Zone

2019 ◽  
Vol 2 (2) ◽  
pp. 36-42
Author(s):  
Hilwa, D. Abu Anga ◽  
Wael A. Marajan ◽  
Abu backer H. Mohammed ◽  
Baha Eldin M Idris
Keyword(s):  
Plant Height ◽  
Yield Components ◽  
Arid Zone ◽  
Block Design ◽  
Dry Weight ◽  
Sowing Date ◽  
Growth And Yield ◽  
Area Index ◽  
Head Diameter ◽  
Semi Arid

The main objective of this study was to quantify the influence of sowing date on growth and yield components of hybrid sunflower (Hysun33) cultivar in semi-arid zone. This experiment was conducted during the seasons 2014/2015-2015/2016 at the farm of the College of Agricultural Studies, Sudan University of Science and Technology, Shambat, Khartoum- Sudan. The experiment was arranged in randomized complete block design (RCBD) with four replications and three treatments. Different parameters were considered including plant height, leaf area index (LAI), filled sees number/head, head diameter, dry weight and yield components. The collected data were statistically analyzed. The results revealed that crop sown in May and July showed significant increase in plant height, LAI, head diameter, dry weight, field seed number/head, weight of 100 seeds; yield, and yield; compared to crop sown in March. However, crop sown in the second season showed an increase in growth and yield components compared to the crop of the first season.

scholarly journals Gibberellic Acid Application and Plant Spacing Effects on Growth and Yield of Lettuce (Lactuca sativa L.)

2020 ◽  
pp. 1-13
Author(s):  
Taslima Akter ◽  
Md. Nazrul Islam ◽  
Md. Jahedur Rahman ◽  
Rebaka Sultana ◽  
Chaity Dey Puja ◽  
...  
Keyword(s):  
Gibberellic Acid ◽  
Leaf Area ◽  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Cost Ratio ◽  
Plant Spacing ◽  
Fresh Weight ◽  
Optimum Spacing ◽  
Number Of Leaves

Aims: This study aimed to optimize the levels of gibberellic acid (GA3) and plant spacing on growth and yield of lettuce. Study Design: The experiment was laid out in Randomized Complete Block Design with three replications. Place and Duration of Study: Horticulture farm of Sher-e-Bangla Agricultural University, Dhaka-1207, from November 2013 to January 2014. Methodology: The experiment consisted of two factors. Factor A- two levels of gibberellic acid (GA3,) application, viz. G1= 25 ppm and G2= 50 ppm in relation to a control G0 and factor B- four plant spacing viz. S1=15cm x 15cm, S2=20 cm x 20 cm, S3=25 cm x 25 cm and S4=30 cm x 30 cm. GA3 was applied twice as a foliar application by hand sprayer at 20 and 30 days after sowing. First, second and final harvesting was done at 25, 35 and 45 days after sowing respectively. Results: The growth and yield characters of lettuce showed significant variation for different levels of GA3 and plant spacing. Among GA3 levels, 25 ppm GA3 produced the maximum number of leaves (15.6), leaf area (283.9 cm2), fresh weight (91.6 g plant-1), dry weight (11.8 g plant-1), fresh yield (1794 g plot-1) and gross yield (12 t ha-1) at final harvesting compared to control where GA3 was not used. Under plant spacing, highest plant height (17.5 cm), leaf area (281.1 cm2), fresh weight (99.1 g plant-1) and dry weight (12.1 g plant-1) was revealed from wider spacing 30 cm x 30 cm followed by optimum spacing 25cm x 25cm. Meanwhile, closure spacing 15 cm x 15 cm showed maximum fresh yield (1710 g plant-1) and gross yield (15.5 t ha-1) due to higher plant density at final harvesting. Besides, lower chlorophyll content (0.43%) and the highest number of leaves (16.2) was found from 25 cm x 25 cm at final harvesting. So, optimum spacing 25 cm x 25 cm would be more suitable considering different points of view. Moreover, the treatment combinations 25 ppm GA3 with 25 cm x 25 cm exhibited highest benefit-cost ratio (2.04) than other treatments. Conclusions: It is concluded that the combinations 25 ppm GA3 application with 25cm x 25cm spacing would be optimum for better growth and yield of lettuce

scholarly journals Effects of Groundnut Shell Incorporation Rates on the Growth and Yield of Maize (Zea mays L.) in Mubi, Adamawa State, Nigeria

2021 ◽  
pp. 18-24
Author(s):  
I. R. Danbima ◽  
I. J. Tekwa ◽  
A. T. Gani
Keyword(s):  
Plant Height ◽  
Growth Parameters ◽  
Block Design ◽  
Growth And Yield ◽  
Area Index ◽  
Maize Growth ◽  
Application Rates ◽  
Number Of Leaves ◽  
Maize Plants ◽  
Groundnut Shell

Purpose: The aim of the study was to assess the effects of groundnut shell incorporation rates on the growth and yield of maize. Research methods: The study was carried out at the students’ demonstration farm of the Federal Polytechnic, Mubi, Adamawa State, in 2018. Seeds were sown on a prepared land treated with four (4) doses of groundnut shells (0, 25, 50 and 75 tons/ha) arranged in a randomized complete block design (RCBD), replicated 4 times. Each plot was marked out at 2.0 m length × 2.0 m width with 0.5 m gap between the replicated plots and blocks. Maize growth parameters were determined at 2, 4, 6 and 8 weeks after sowing and maize yield parameters were determined at 10 and 12 weeks after sowing (WAS). Findings: The groundnut shell application rates increased maize growth parameters such as, plant height, number of leaves per plant, leave area index, and stem girth, number of cobs per plant and cobs weight. The results revealed that plant height, number of leaves, leaf area index and stem girth were significantly (P≤ 0.05) influenced by the treatments, except for the control treatment at 2- WAS. The higher application rates (50 and 75 t/ha) of groundnut shell significantly (P≤ 0.05) influenced the plant growth components better than the 25 and 0 t/ha treatment rates. Research limitations: There were no limitations to report. Originality/Value: The results suggests that groundnut shell incorporation rate at 50 t/ha could be recommended as the most appropriate and profitable for high performance of maize plants in Mubi. The results generally suggest that maize plants may tolerate even higher rates of groundnut shell incorporation beyond the rates used in the study.

Sign in / Sign up

Export Citation Format

Share Document