Deburring of Resin Molded Products by Sensorless Shape-Tracing Deburring Technology (On the Principle of Sensorless Shape-Tracing Deburring)

This study aims to automate deburring resin workpieces as generated in injection molding by an articulated robot using sensorless shape-tracing deburring technology. Because resin workpieces largely vary in their individual shape differences, as well as installation errors, it is difficult for an articulated robot, which operates solely based on the given teaching in general use, to precisely deburr the workpieces owing to its precision deficiency. In this study, a deburring technology called “shape-tracing deburring” was developed to prevent a tool from breaking into a workpiece while absorbing any positional errors, based on a mechanism capable of mechanically maintaining the force between the tool and the workpiece constant in relation to the shape of the latter. In this way, an articulated robot can stably deburr the workpiece by following any changes in the workpiece shape. In this report, the principle and system of the shape-tracing deburring technology capable of mechanically tracing the workpiece shape without a sensor are discussed. Furthermore, the effectiveness of the developed shape-tracing deburring technology is demonstrated through an example of deburring a resin molded article with an actual cutter complete with a shape-tracing part.

The Design of the Injection Molding Machine Control System Based on PLC Controller

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.602-605.1403 ◽

2014 ◽

Vol 602-605 ◽

pp. 1403-1406

Author(s):

Li Kang ◽

Wen Tan Jiao

Keyword(s):

Control System ◽

Injection Molding ◽

Molding Machine ◽

Temperature Deviation ◽

Injection Molding Machine ◽

Actual Application ◽

Machine Control ◽

The Given ◽

Plastic Injection ◽

Control Accuracy

Control system of the Plastic injection molding machine formed by electric relays and switching valves has many shortcomings, such as complexity wiring, low control accuracy, inconvenience maintenance and lack of flexibility, using the simulation assessment of the actual application method, this paper designs the injection molding machine control systems based on PLC controller, the new control system is composed by PLC, inverter, sensors and other components, with the help of PID control, which according to the given screw barrel temperature deviation value and measured value, automatically adjust and stabilize of the entire control system. Simulation experimental results show this new control system can achieve better performance is effective, which will decrease energy consumption of the stabilization system; the research achievements have certain theoretical and practical value to the design of injection molding machine control system.

An Injection Molding Expert Controller Based on Neural Network Optimization Schemes

10.1115/imece2000-1227 ◽

2000 ◽

Author(s):

Pei-Jen Wang ◽

Jui-Ming Liang

Keyword(s):

Process Control ◽

Injection Molding ◽

Process Conditions ◽

Control Parameters ◽

Quality Factors ◽

Performance Indexes ◽

Optimization Schemes ◽

Intelligent Process ◽

The Given ◽

Intelligent Process Control

Abstract The objective of this paper is to investigate the optimization schemes for intelligent process control based on neural networks in injection molding. To achieve the goal of intelligent process control, performance indexes, formulating by multi-losses functions, are adaptively optimized for reverse deducing the process control parameters from the quality factors of parts. In addition, the requirements on quality factors such as dimensions, shrinkage, and warpage are predicted by making use of the Computer-Aided Engineering software, namely C-MOLD, with the process window pre-screened by the Design of Experiments procedure. Hereby, a model consisting of Radial Basis Functions Networks (RBFN) is employed for representing the causal factors between the process control parameters and the quality factors. And, the RBFN model is then trained for optimizing the given performance indexes with an adaptive optimization scheme. Finally, two example cases based on numerical simulations on process control are demonstrated for verifications. It is observed that the proposed intelligent process control in injection molding could automatically achieve stable and nearly optimal process conditions within a short period of time for the given quality requirements. Therefore, the intelligent expert controller could be applied for practical uses on the shop floor in the future.

Personal Problem Solving of Partners in Divorce Proceedings

Rorschachiana Journal of the International Society for the Rorschach ◽

10.1027/1192-5604/a000053 ◽

2015 ◽

Vol 36 (1) ◽

pp. 82-103 ◽

Author(s):

Tereza Soukupova ◽

Petr Goldmann

Keyword(s):

Gender Differences ◽

Problem Solving ◽

Thematic Apperception Test ◽

Scoring Systems ◽

Personal Control ◽

Personality Characteristics ◽

Personal Problem ◽

Thematic Apperception ◽

And Gender ◽

Abstract. The Thematic Apperception Test is one of the most frequently administered apperceptive techniques. Formal scoring systems are helpful in evaluating story responses. TAT stories, made by 20 males and 20 females in the situation of legal divorce proceedings, were coded for detection and comparison of their personal problem solving ability. The evaluating instrument utilized was the Personal Problem Solving System-Revised (PPSS-R) as developed by G. F. Ronan. The results indicate that in relation to card 1, men more often than women saw the cause of the problem as removable. With card 6GF, women were more motivated to resolve the given problem than were men, women had a higher personal control and their stories contained more optimism compared to men’s stories. In relation to card 6BM women, more often than men, used emotions generated from the problem to orient themselves within the problem. With card 13MF, the men’s level of stress was less compared to that of the women, and men were more able to plan within the context of problem-solving. Significant differences in the examined groups were found in those cards which depicted significant gender and parental potentials. The TAT can be used to help identify personality characteristics and gender differences.

Pattern Recognition in Histo-Pathology: Basic Considerations

Methods of Information in Medicine ◽

10.1055/s-0038-1635387 ◽

1982 ◽

Vol 21 (01) ◽

pp. 15-22 ◽

Cited By ~ 10

Author(s):

W. Schlegel ◽

K. Kayser

Keyword(s):

Pattern Recognition ◽

Graph Theory ◽

Normal Tissue ◽

Diagnostic Procedures ◽

Minimal Distance ◽

Malignant Growth ◽

Colon Tissue ◽

First Results ◽

Tissue Structures ◽

A basic concept for the automatic diagnosis of histo-pathological specimen is presented. The algorithm is based on tissue structures of the original organ. Low power magnification was used to inspect the specimens. The form of the given tissue structures, e. g. diameter, distance, shape factor and number of neighbours, is measured. Graph theory is applied by using the center of structures as vertices and the shortest connection of neighbours as edges. The algorithm leads to two independent sets of parameters which can be used for diagnostic procedures. First results with colon tissue show significant differences between normal tissue, benign and malignant growth. Polyps form glands that are twice as wide as normal and carcinomatous tissue. Carcinomas can be separated by the minimal distance of the glands formed. First results of pattern recognition using graph theory are discussed.

Coordinating Medical Literature with Patient Care

Methods of Information in Medicine ◽

10.1055/s-0038-1636598 ◽

1977 ◽

Vol 16 (04) ◽

pp. 234-240 ◽

Author(s):

Joann Gustafson ◽

J. Nelson ◽

Ann Buller

Keyword(s):

Health Care ◽

Medical Staff ◽

Medical Information ◽

Medical Literature ◽

Medical Information System ◽

Staff Members ◽

Information Displays ◽

Medical Displays ◽

Computerized Medical Information ◽

The contribution of a special library project to a computerized problem-oriented medical information system (PROMIS) is discussed. Medical information displays developed by the PROMIS medical staff are accessible to the health care provider via touch screen cathode terminals. Under PROMIS, members of the library project developed two information services, one concerned with the initial building of the medical displays and the other with the updating of this information. Information from 88 medical journals is disseminated to physicians involved in the building of the medical displays. Articles meeting predetermined selection criteria are abstracted and the abstracts are made available by direct selective dissemination or via a problem-oriented abstract file. The updating service involves comparing the information contained in the selected articles with the computerized medical displays on the given topic. Discrepancies are brought to the attention of PROMIS medical staff members who evaluate the information and make appropriate changes in the displays. Thus a feedback loop is maintained which assures the completeness, accuracy, and currency of the computerized medical information. The development of this library project and its interface with the computerized health care system thus attempts to deal with the problems in the generation, validation, dissemination, and application of medical literature.

Identification and Transformation of Terminal Morphemes in Medical English

Methods of Information in Medicine ◽

10.1055/s-0038-1636644 ◽

1969 ◽

Vol 8 (02) ◽

pp. 84-90 ◽

Author(s):

A. W. Pratt ◽

M. Pacak

Keyword(s):

Word Form ◽

Subsequent Transformation ◽

Part Of Speech ◽

Morphological Segmentation ◽

Medical English ◽

Nominal Form ◽

Admissible Path ◽

Near Future ◽

The Given ◽

Admissible Sequences

The system for the identification and subsequent transformation of terminal morphemes in medical English is a part of the information system for processing pathology data which was developed at the National Institutes of Health.The recognition and transformation of terminal morphemes is restricted to classes of adjectivals including the -ING and -ED forms, nominals and homographic adjective/noun forms.The adjective-to-noun and noun-to-noun transforms consist basically of a set of substitutions of adjectival and certain nominal suffixes by a set of suffixes which indicate the corresponding nominal form(s).The adjectival/nominal suffix has a polymorphosyntactic transformational function if it has the property of being transformed into more than one nominalizing suffix (e.g., the adjectival suffix -IC can be substituted by a set of nominalizing suffixes -Ø, -A, -E, -Y, -IS, -IA, -ICS): the adjectival suffix has a monomorphosyntactic transformational property if there is only one admissible transform (e.g., -CIC → -X).The morphological segmentation and the subsequent transformations are based on the following principles:a. The word form is segmented according to the principle of »double consonant cut,« i.e., terminal characters following the last set of double consonants are analyzed and treated as a potential suffix. For practical purposes only such terminal suffixes of a maximum length of four have been analyzed.b. The principle that the largest segment of a word form common to both adjective and noun or to both noun stems is retained as a word base for transformational operations, and the non-identical segment is considered to be a »suffix.«The backward right-to-left character search is initiated by the identification of the terminal grapheme of the given word form and is extended to certain admissible sequences of immediately preceding graphemes.The nodes which represent fixed sequences of graphemes are labeled according to their recognition and/or transformation properties.The tree nodes are divided into two groups:a. productive or activatedb. non-productive or non-activatedThe productive (activated) nodes are sequences of sets of graphemes which possess certain properties, such as the indication about part-of-speech class membership, the transformation properties, or both. The non-productive (non-activated) nodes have the function of connectors, i.e., they specify the admissible path to the productive nodes.The computer program for the identification and transformation of the terminal morphemes is open-ended and is already operational. It will be extended to other sub-fields of medicine in the near future.

The Role and Place of Budget Procedure in the System

Voprosy Ekonomiki ◽

10.32609/0042-8736-2003-5-42-49 ◽

2003 ◽

pp. 42-49 ◽

Author(s):

E. Bushmin

Keyword(s):

Budget Process ◽

Public Expenditures ◽

Principal Role ◽

Process Trends ◽

The Given ◽

Rules Of The Game

The article is devoted to the analysis of improving budget process trends. The author offers the concept of "financial technologism". Its usage should promote an essential improvement of the budget process. The given concept is based on the fact that the regulation of budget procedure is the process of determination of "rules of the game", and the order of interaction of different institutions within the framework of the budget process, and the trends and volumes of expenses are the strategy of institutions. The procedure within the budget process plays a principal role as compared with the trends and volumes of public expenditures.

Deskripsi Kesulitan Belajar Siswa Berdasarkan Karakteristik Lerner dalam Menyelesaikan Soal Geometri

Talenta Conference Series Science and Technology (ST) ◽

10.32734/st.v2i2.545 ◽

2019 ◽

Vol 2 (2) ◽

Author(s):

Nazom Murio ◽

Roseli Theis

Keyword(s):

Qualitative Research ◽

Visual Perception ◽

Learning Difficulties ◽

Research Subjects ◽

Visual Objects ◽

Almost All ◽

Personality Classification ◽

The Given ◽

Classification Test ◽

Descriptive Qualitative

Geometri adalah bagian matematika yang sangat dekat dari siswa, karena hampir semua objek visual yang ada di sekitar siswa adalah objek geometri, tetapi tidak semua siswa menyukai pembelajaran yang menyertakan gambar, sehingga memungkinkan siswa mengalami kesulitan dalam belajar geometri. Tujuan dari penelitian ini adalah untuk menggambarkan kesulitan belajar siswa berdasarkan karakteristik Lerner dalam menyelesaikan pertanyaan geometri. Jenis penelitian ini adalah penelitian deskriptif kualitatif. Subjek penelitian adalah siswa dengan kepribadian wali yang mengalami kesulitan belajar di kelas IX A SMP N 30 Muaro Jambi. Instrumen yang digunakan dalam penelitian ini adalah penulis sendiri, lembar tes klasifikasi kepribadian, lembar tes kesulitan belajar, dan pedoman wawancara. Hasil penelitian menunjukkan siswa dengan kepribadian wali yang mengalami kesulitan belajar, 100% mengalami kelainan persepsi visual, di mana siswa mengalami kesulitan dalam menentukan seperti apa bangun datar pada masalah tersebut. 60% mengalami kesulitan mengenali dan memahami simbol, di mana siswa melihat simbol "//" sebagai simbol untuk kesesuaian. Serta 40% mengalami kesulitan dalam bahasa dan membaca, di mana siswa kesulitan dalam memahami pertanyaan yang diberikan. Geometry is a very close mathematical part of the student, because almost all visual objects that exist around the students are objects of geometry, but not all students like learning that includes images, thus allowing students to have difficulty in learning geometry. The purpose of this research is to describe students' learning difficulties based on Lerner's characteristic in solving the geometry question. This type of research is descriptive qualitative research. Research subjects were students with guardian personality who had difficulty studying in class IX A SMP N 30 Muaro Jambi. Instruments used in this study are the authors themselves, personality classification test sheets, learning difficulties test sheets, and interview guidelines. The results showed students with guardian personality who experienced learning difficulties, 100% experienced visual perception abnormalities, where students have difficulty in determining what kind of flat wake on the matter. 60% have difficulty recognizing and understanding symbols, where students see the symbol "//" as a symbol for conformity. As well as 40% have difficulty in language and reading, where students difficulty in understanding the given question.

Professional dilemmas for caregivers in Turkish home care settings in Germany

BORDER CROSSING ◽

10.33182/bc.v4i1-2.517 ◽

2014 ◽

Vol 1 (1) ◽

pp. 47-56 ◽

Author(s):

Jan Basche

Keyword(s):

Healthcare Services ◽

Insurance Companies ◽

Or Education ◽

Migrant Communities ◽

Caregiver Relationship ◽

International Nursing ◽

Nursing Literature ◽

Intercultural Care ◽

While calling for culturally sensitive healthcare services in migrant communities, the international nursing literature on intercultural care predominantly describes nursing staff as lacking cultural competences and immigrant customers as lacking cleverness to navigate the labyrinths of national healthcare systems. Congruences in language, culture and religion in the customer-caregiver relationship can decisively improve the quality of care. However, they do not automatically guarantee smooth working processes in monocultural in-home settings. On the contrary, new problems occur here for Turkish caregivers which are unknown to the legions of native professionals who feel challenged by migrants and which go beyond differences such as age, sex, income or education. While no cultural or religious brokering is necessary between customers and personnel in the given context in Germany, new challenges arise when caregivers are expected to legally broker between customers and insurance companies or doctors. Conflicting expectations of customers and management as well as their own colliding social and professional roles put the caregivers in a quandary and must be competently managed.