scholarly journals Keragaman Karakter Morfologi, Komponen Hasil, dan Hasil Plasma Nutfah Kedelai (Glycine max L.)

Jurnal BIOMA ◽  
2014 ◽  
Vol 10 (2) ◽  
pp. 41 ◽  
Author(s):  
Priskilla Purnaning Putri ◽  
Adisyahputra Adisyahputra ◽  
Asadi Asadi
Keyword(s):  
Glycine Max ◽  
Yield Components ◽  
Block Design ◽  
Morphological Characteristics ◽  
Significant Negative Correlation ◽  
Morphological Characters ◽  
Yield Component ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Black Seeds

Abstract Soybean (Glycine max L.) is annual crop that have high morphologies and yield components diversity. The research was conducted at the first season of 2011, the objective of the research were to find morphological, yield, and yield component of Soybean germplasm (Glicine max L.). The research was carried out at experimental station BB-BIOGEN Citayam, Depok, and laboratory of Gene Bank BB-BIOGEN. The experiment used randomized block design with 100 different accessions and three replications for each accession. Based on the observation, the morphological characters have many visual forms. They are as follows: growth percentage in which 19.33 – 99%; growth types were determinate and indeterminate, the leave form was triangle to sharp; purple and white flowers; yellow and black seeds color. The range of values for each characteristic component are as follows: plant height 29,23 – 104,25 cm; number of pods per plant was 23,6 – 99,82; flowering time 33 – 47 days after planting; 100 seed weight 5,98 – 20,77 gram; maturing time 75 – 96,67 days after planting; root nodule’s weight 0,004 – 0,109 gram; seed’s weight 3,15 – 11,45 gram/plant. Among the accessions, the highest yield was shown by B 4323 (643,27 gram/3,6 m2). Significant correlation was shown between soybean’s yield components and yield which were plant’s height, growth percentage, numbers of main stem’s node, numbers of pods, seeds weight for each plant and root nodule’s weight. 100 seeds weight showed significant negative correlation with soybean components.   Key words: germplasm, morphological characteristics, soybean, yield components

scholarly journals Keragaan Pertumbuhan dan Produksi Beberapa Varietas Kedelai (Glycine Max L.) pada Gawangan TBM Kelapa Sawit

2020 ◽  
Vol 4 (2) ◽  
pp. 73-82
Author(s):  
Ahmad Haitami ◽  
Elfi Indrawanis ◽  
Chairil Ezward ◽  
Wahyudi Wahyudi
Keyword(s):  
Glycine Max ◽  
Palm Oil ◽  
Oil Palm ◽  
Block Design ◽  
Morphological Characteristics ◽  
Production Performance ◽  
Treatment Level ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Range Test

This research was aims to determine the growth and production performance of several soybean varieties (Glycine max L.) in the palm oil palm oil compartment. The specific objectives of this study are 1) to determine the growth and production performance of several soybean varieties grown in the oil palm gates of TBM. 2) Determine the morphological characteristics of the appearance of some soybean varieties. This research has been carried out in the Experimental Garden of the Faculty of Agriculture, Kuantan Singingi Islamic University for 4 months. This study used a Completely Randomized Block Design (RCBD) consisting of 5 treatment levels and 3 groups, so that 15 unit experimental units were obtained. The treatment level consists of A = Variety Demas 1, B = Dena Varieties 1, C = Argo Mulyo Varieties, D = Devon Varieties 1, E = Devon Varieties 2. The results of the study were statistically tested using SAS version 9.0. give real influence. Based on the results of further tests with Duncan Multiple Range Test (DMRT) at a level of 5%, the plant height parameter of Devon 1 variety was significantly different from other varieties, the total number of pod parameters of Demas 1 variety was significantly different from other varieties, the grain weight parameters and the weight of 100 grains of Devon 2 variety are significantly different from the varieties of Argo Mulyo, Devon 1, Dena 1, and Demas 1.

scholarly journals Growth and Yield of Soybean (Glycine max L. Merill) at Various Doses of Bokashi Fertilizer on Ultisol

2021 ◽  
Vol 4 (2) ◽  
pp. 60-64
Author(s):  
Luki Rianti ◽  
Hesti Pujiwati ◽  
Masdar Masdar ◽  
Hermansyah Hermansyah ◽  
Heru Widiyono
Keyword(s):  
Glycine Max ◽  
Block Design ◽  
Yield Component ◽  
Raw Material ◽  
Growth And Yield ◽  
Optimum Dose ◽  
The People ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Number Of Leaves

Soybean is a type of secondary crop that is widely cultivated and used as raw material for tofu, tempe, milk, and so on by the people of Indonesia. Soybean consumption is always increasing but soybean production has decreased. This study aims to obtain the optimum dose of Bokashi fertilizer on plant growth and yield in Ultisol. The study was carried out in Medan Baru, Kandang Limun Village, Muara Bangkahulu District, Bengkulu City from December 2018 to April 2019. This study used a Completely Randomized Block Design (RCBD) with one factor, namely the dose of Bokashi fertilizer with five levels, namely 0 tons ha-1, 25 tons ha-1, 35 tons ha-1, 45 tons ha-1, and 55 tons ha-1. The results showed that the optimum dose of Bokashi fertilizer was not found in the growth component or yield component. The dose of Bokashi fertilizer had a significant effect (p<0.05) on the growth of Bokashi and the number of leaves.

scholarly journals OPTIMIZATION OF SOYBEAN GROWTH AND PRODUCTION THROUGH THE USE OF COMBINATION OF DECANTER CAKE WITH CHICKEN MANURE (Glycine Max (L.) Merril )

Agric ◽  
2021 ◽  
Vol 33 (1) ◽  
pp. 1-12
Author(s):  
Made Deviani Duaja
Keyword(s):  
Glycine Max ◽  
Yield Components ◽  
Block Design ◽  
Percent Level ◽  
Chemical Properties ◽  
Chicken Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Decanter Cake ◽  
Glycine Max L

This study aims to obtain the best combination of decanter cake (DC) and organic materials,chicken manure (PKA) on soybean growth and yield at Ultisols.. The research design used wasa Randomized Block Design, with treatment of combination of DC and PKA. The treatmentswere control (recommended inorganic fertilizer: 100 kg / ha NPK), DC 15 ton / ha + PKA 0 ton/ha, DC 10 ton / ha + PKA 5 ton / ha, DC 7.5 ton / ha + PKA 7 , 5 ton / ha, DC 5 tos / ha + PKA10 ton / ha, DC 0 ton / ha + PKA 15 ton / ha. Parameters observed: Number of productivebranches, number of pods per plant, number of filled pods, soybean grain yield . The dataobtained were analyzed by means of variance and DMRT at the 5 percent level. The resultsshowed that the combination of DC and PKA could improve soil chemical properties, and hada significant effect on the number of productive branches, yield components and soybean yield.The best combination for the highest soybean yield was the combination of DC 5.0 tonnes / ha+ PKA 10.0 tonnes / ha.

scholarly journals Pertumbuhan dan Hasil Kedelai di Lahan Rawa Lebak dengan Aplikasi Pupuk Hayati dan Kimia

2018 ◽  
Vol 45 (3) ◽  
pp. 263
Author(s):  
Endriani , ◽  
Munif Ghulamahdi ◽  
Dan Eko Sulistyono
Keyword(s):  
Glycine Max ◽  
Soil Fertility ◽  
Block Design ◽  
Randomized Block Design ◽  
National Production ◽  
Glycine Max L ◽  
Number Of Leaves ◽  
Four Levels ◽  
P Fertilizers ◽  
Number Of Branches

Soybean (Glycine max L. Merrill) demand is high in Indonesia, however national production is low, therefore improving productivity is important. The research was aimed to determine the effect of application of biofertilizer containing N- fixing and P- solubilizing bacteria on the growth and production of soybean in lowland swamp. The experiment was conducted  at  Labuhan Ratu VI Village, District of Labuhan Ratu, East Lampung Regency from September to December 2014. The experiment was arranged in factorial randomized block design with three replications. N and P fertilizers were applied in four levels. Doses of N were 0, 11.25, 22.50, 33.75 kg ha-1, doses of P were 0, 36, 72, 108 P2O5 kg ha-1, in combination with and without biofertilizer application. The results showed that interaction between biofertilizer and N significantly affected number of branches and number of leaves at maximum vegetative phase. The influence of three types of fertilizer had no significant effect on the productivity of soybean in lowland swamp with soil pH of 7.0 and medium soil fertility. It is recommended to apply Biofertilizer + 11,25 kg N ha-1 + 36 kg P2O5 ha-1 to obtain high soybean production in lowland swamp area.<br /><br />Keywords: nitrogen, phosphate, productivity, soil fertility<br /><br />

scholarly journals PERUBAHAN BENTUK DAN UKURAN BENIH DUA KULTIVAR KEDELAI (Glycine max (L.) Merr.) DI JATINANGOR DAN CIKAJANG

2017 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Siti Rodiah ◽  
Zulfatunnisa Zulfatunnisa ◽  
Sumadi Sumadi ◽  
Anne Nuraini ◽  
Meddy Rachmadi ◽  
...  
Keyword(s):  
Glycine Max ◽  
Low Temperature ◽  
Seed Size ◽  
Block Design ◽  
Soybean Seed ◽  
Growth Environment ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Improved Cultivars ◽  
Size Heterogeneity

The variation of the seed size in each species and individuals might be from of difference species adaptation for  a difference environment. This difference may also arise from the constraints of limited formation of seed size. The use of adaptive ciltivars on the growth environment is very influential on the succes in the farm field. This research was aimed to find the adaptation of phase and size seed of two cultivars of soybeans in Jatinangor and Cikajang. This research was held in Jatinangor (Sumedang regency) and Cikajang (Garut regency) from April to July 2016. The design that used in this research was Randomized Block Design (RBD) and Duncan at 5% rate. Improved cultivars that tested in this research were placed at Grobogan and Anjasmoro which were repeated 5 times. The results of experiment showed that adaptation of size seed showed of 100 grains and large seeds. The low temperature condition can increase of variability of seed size. Heterogeneity of environment can not sustain the size of soybean seed. Genetic and environment factors influence significantly for weight of 100 grains and seed size Grobogan in Jatinangor. The weight of 100 grains Grobogan in Jatinangor and Cikajang haved a greater than Anjasmoro. Environmental factors influence yield of soybean, weight of 100 grains of cultivars in Cikajang haved a greater than Jatinangor caused by the seed size.

scholarly journals Planting Density and Soybean (Glycine max L.) Cultivars Effects on Yield Components in the Amazon

2020 ◽  
Vol 8 (3) ◽  
pp. 63
Author(s):  
Priscila Pereira Sacramento ◽  
Letícia Cunha da Hungria ◽  
Jamil Chaar El-Husny ◽  
Luis De Souza Freitas
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Block Design ◽  
Planting Density ◽  
Maximum Height ◽  
Soybean Cultivars ◽  
Linear Behavior ◽  
Randomized Block Design ◽  
Glycine Max L

The aim of this study was to evaluate the influence of planting density and cultivar of soybean on yield components in the southeast Amazon. The experiment was carried out in an Oxisol, with a randomized block design in a 2 x 4 factorial scheme. The treatments were two soybean cultivars (BRS 9090 RR and BRS 8990 RR) and four planting densities (13, 15, 18 and 20 plants m-1), with three replications. First pod insertion height (IFP), plant height (H), number of pods per plant (NPP), grain yield (Y) and weight of 100 grains (W100) were evaluated. The insertion height of the first pod showed a tendency of increase with the increment of plants per linear meter for cultivar BRS 8990 RR, different of the behavior observed for the cultivar BRS 9090 RR, which only showed difference when the density of 300.000 plants ha-1 was tested. For plant height, among soybean cultivars, there was only difference in D400, with BRS 8990 RR showing a maximum height of 83.3 cm, 21% higher than BRS 9090 RR. When evaluated under D350, BRS 8990 RR showed an increase of 13% in the number of pods compared to BRS 9090 RR. Both cultivars showed linear behavior for the grain yield, increasing according the plant population, with the highest grain yield obtained under the density of 400.000 plants ha-1 (4527.3 kg ha-1). The weight of 100 grains was not influenced by any variation factor.

scholarly journals EVALUASI PERTUMBUHAN DAN DAYA HASIL BERBAGAI KLON NILAM ASAL KULTUR JARINGAN

2020 ◽  
Vol 8 (4) ◽  
pp. 117
Author(s):  
. HOBIR ◽  
DELIAH SESWITA
Keyword(s):  
Tissue Culture ◽  
Yield Components ◽  
Oil Content ◽  
Morphological Characteristics ◽  
Morphological Characters ◽  
Yield Component ◽  
Growth And Yield ◽  
Pogostemon Cablin ◽  
Gamma Irradiated ◽  
Herb Yield

<p>Pertumbuhan dan daya hasil dari berbagai klom nilam dievatuasi di KP. Cimanggu (Bogor) dari tahun 1999 - 2000. Dua puluh dua klon nilam yang berasal dai kultur kalus yang diradiasi dengan sinar gamma, 1 klon kontrol (asal kultur mata tunas) serta 3 klon pembanding (Klon TT, Sdk dan Crt) ditanam dengan jarak tanam 100 cm x 50 cm. Percobaan dirancang secara acak kelompok dengan 3 ulangan. Luas petak adalah 10 m2 yang memuat 20 tanaman. Parameter yang digunakan adalah sifat- sifat morfologi, yang meliputi tinggi tanaman, diameter batang, jumlah dan panjang cabang, jumlah daun per cabang, panjang dan lebar daun serta komponen hasil, yang meliputi berat tanaman, berat tcrsuling (segar dan kering) dan kadar minyak. Hasil penelitian menunjukkan bahwa berdasarkan sifat-sifat morfologi dan komponen hasil terdapat 4 klon yang mcnonjol. yaitu 3 klon hasil kultur jaingan (klon lb, 2b, dan 75) dengan hasil tema kering masing-masing 0.222; 0.222; dan 0. 216 kg/tanaman dan kadar minyak masing-masing 4.28; 4.00; dan 4.54%, serta satu klon konvensional (Ct) dengan hasil tema keing 0.469 dan kadar minyak 4.84%.</p><p>Kata kunci: Pogostemon cablin, nilam, klon, kultur jaringan</p><p> </p><p><strong>ABSTRACT </strong></p><p><strong>Evaluation on the growth and yield potency of different clones ofpatchoulifrom tissue culture</strong></p><p>The growth and yield potency of different patchouli developed from tissue culture were studied at the Cimanggu Experimental Garden from 1999 to 2000. The materials were twenty-two clones of patchouli raised rom the gamma irradiated calli, 1 control clone (raised rom tissue culture propagated plant from which the irradiated calli were derived) and 3 conventionally propagated clones (Crt, TT and Sdk). The planting mateials were planted in a plant spacing of 100 cm x 50 cm. The experiment was designed as a randomaized block in 3 replicates. Plot size was 10 m2, accommodated 20 plants. Parameters used for evaluating the clones were morphological characters and yield components. The morphological characters included plant height, stem diameter number of branches, number of leaves per branch and size of leaves, while the yield component included weight of whole plant, distilled herbs (fresh and dry herbs) and oil content. Based on die morphological characteristics and yield components, 4 clones showed their superioity. The four clones were lb, 2b, and 75 (raised from tissue culture) with a herb yield of 0.222; 0.222 and 0216 kg/plant and an oil content of 4.28, 4.00 and 4.84% respectively, and Ct ( from convetional clone) with a herb yield of 0.469 kg/plant and an oil content of 4.84%.</p><p>Key words : Pogostemon cablin, nilam, clones, tissue culture</p>

scholarly journals Aplikasi Pupuk N, P, K dan Konsorsium Pupuk Hayati terhadap Retensi Hara, Serapan, dan Hasil Kedelai (Glycine max (L.)) pada Inceptisol

SoilREns ◽  
2018 ◽  
Vol 16 (1) ◽  
Author(s):  
Anni Yuniarti ◽  
Yuliati Machfud ◽  
Eso Solihin ◽  
Yogi Sudirman ◽  
Apong Sandrawati
Keyword(s):  
Glycine Max ◽  
Block Design ◽  
N Uptake ◽  
Low Fertility ◽  
P Availability ◽  
Total N ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Npk Fertilizer ◽  
Quality Status

Inceptisol is a widespread soil order with low fertility. Hence it is necessary to improve its quality status through the application of chemical and biological fertilizers. The main objecttive of this study is to determine the effect of NPK fertilizer and biofertlizer consortia (BC) combinations in Inceptisols towards N and P availability in soil and uptake by soybean (Glycine max L.). Experiments were carried out from April to August 2016 at Ciparanje Experimental Farm, Faculty of Agriculture, Universitas Padjadjaran, Jatinangor, Sumedang at the approximate altitude of 720 meters above the sea level. Randomized Block Design experimental design consisted of ten treatments and three replications was used in this study. Treatments consisted of control (no treatment), Recommended NPK dosage, 0 NPK + 1 BC, ¼ NPK + 1 BC, ½ NPK + 1 BC, ¾ NPK + 1 BC, 1 NPK + 1 BC, ¾ NPK + ¼ BC, ¾ NPK + ½ BC and also ¾ NPK + ¾ BC. Experimental results showed that the combination of NPK fertilizer and soybean-spesific biofertilizer consortium increased soil total phosphate content,  nitrogen uptake by plant, and soyben yield significantly.  Keywords: Biofertilizer, Soybean, total-N, Uptake of N, Inceptisols

scholarly journals Defoliation at different vegetative stages and assessment of morphological and yield components

2016 ◽  
Vol 22 (1) ◽  
Author(s):  
Maicon Nardino ◽  
Velci Queiróz de Souza ◽  
Carlos André Bahry ◽  
Ivan Ricardo Carvalho ◽  
Braulio Otomar Caron ◽  
...  
Keyword(s):  
Experimental Design ◽  
Grain Yield ◽  
Water Availability ◽  
Yield Components ◽  
Block Design ◽  
Morphological Characters ◽  
Main Stem ◽  
Stem Height ◽  
Randomized Block Design ◽  
Pod Number

Objective was to evaluate the influence of defoliation of a soybean cultivar indeterminate growth in different vegetative stages on morphological characters and yield components. The study was conducted in the years 2010/11 and 2011/12. The experimental design was a randomized block design with seven treatments and four replications for each year. The treatments were: T1: No defoliation; T2: Defoliation in V4, T3: Defoliation in V4 and V5, T4: Defoliation in V4, V5 and V6, T5: Defoliation in V4, V5, V6 and V7, T6: Defoliation in V4, V5, V6, V7 and V8 and T7: Defoliation in V4, V5, V6, V7, V8 and V9. The variables analyzed were: main stem height, number and length of branches, first pod, number of pods per node on the main stem, and the branches per plant, number of reproductive nodes on the main stem, the branches, number of us total on the main stem, the branches, distance between us and grain yield. Grazing did not influence most of the morphological characters and increments the number of pods on the stem in years with good water availability and high levels of defoliation, and yield of soybean.

THE EFFECT OF ADDITIVE COMBINATION AND Azotobacter sp. TOWARDS Glycine max. L. GROWTH

2019 ◽  
Vol 24 (2) ◽  
pp. 97-107
Author(s):  
Yunia Vella Alfani ◽  
Pudjawati Suryatmana ◽  
Ade Setiawan
Keyword(s):  
Glycine Max ◽  
Chlorophyll Content ◽  
Plant Height ◽  
Block Design ◽  
Coconut Water ◽  
Plate Count ◽  
Total Plate Count ◽  
Randomized Block Design ◽  
Glycine Max L ◽  
Additive Materials

This study was aimed at determining the increasing of growth and production of soybean crops by giving Azotobacter sp. and additive materials such as coconut water, molasses, and bran. This research was conducted on Januari 2018 to April 2018 at Ciparanje Experimental Field Faculty of Agriculture. Universitas Padjadjaran, Jatinangor, Sumedang, West Java Province, on ± 774 meters above sea level (asl) using single factor randomized block design with 10 treatments; Azotobacter sp. and additive materials combination such as coconut water, molasses, and bran in three repetitions. The observations on the parameters observed in the final vegetative phase were on plant height, chlorophyll content, and population of Azotobacter sp. using Total Plate Count (TPC) method.The results show that the application of combination additives materials and Azotobacter sp. effect on populations Azotobacter sp., chlorophyll content, plant height and number of soybean pods (Glycine max L.). Application of coconut water independently, water added with Azotobacter sp., and combination of additive with Azotobacter sp. can give the best effect to the content of chlorophyll, plant height, and soybean crops components (Glycine max. L.).PENGARUH KOMBINASI BAHAN ADITIF DAN Azotobacter sp. TERHADAP PERTUMBUHAN Glycine max. L.Penelitian ini bertujuan untuk mengetahui pertumbuhan dan produksi tanaman kedelai dengan memberikan Azotobacter sp. dan aditif air kelapa, molase, serta dedak. Penelitian ini dilaksanakan pada Januari 2018-April 2018 di Kebun Percobaan Ciparanje Fakultas Pertanian Universitas Padjadjaran, Jawa Barat pada ± 774 meter di atas permukaan laut (dpl). Penelitian ini menggunakan rancangan acak kelompok dengan 10 perlakuan pemberian Azotobacter sp. dan aditif air kelapa, molase, serta dedak dengan tiga ulangan. Pengamatan terhadap parameter yang diamati pada fase vegetatif akhir yaitu tinggi tanaman, kandungan klorofil, dan populasi Azotobacter sp. dengan metode Total Plate Count (TPC). Hasil penelitian menunjukkan aplikasi kombinasi bahan aditif dan penambahan pupuk hayati Azotobacter sp. berpengaruh terhadap populasi Azotobacter sp., kadar klorofil, tinggi tanaman dan jumlah polong tanaman kedelai (Glycine max L.). Aplikasi air kelapa secara mandiri, air kelapa yang ditambahkan dengan Azotobacter sp., dan kombinasi bahan aditif dengan Azotobacter sp. dapat memberikan pengaruh terbaik terhadap kandungan klorofil, tinggi tanaman, dan komponen hasil tanaman kedelai (Glycine max. L.). 

Sign in / Sign up

Export Citation Format

Share Document