scholarly journals Measuring the modal parameters of a cultural heritage tower by using strong-motion signals

ACTA IMEKO ◽  
2018 ◽  
Vol 7 (3) ◽  
pp. 86 ◽  
Author(s):  
Mariella Diaferio ◽  
Dora Foti ◽  
Nicola Ivan Giannoccaro ◽  
Salvador Ivorra Ivorra
Keyword(s):  
Phase Shift ◽  
Environmental Conditions ◽  
Excitation Frequency ◽  
Strong Motion ◽  
Forced Vibrations ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Vibration Modes ◽  
Experimental Campaign ◽  
Different Levels

This paper presents the dynamic experimental campaign carried out on a stocky masonry clock tower situated in the Swabian Castle of Trani (Italy). The main objective of this paper is, after estimating the main frequencies and vibration modes of the considered structure, defining the transmission of vibrations along the height of the tower by varying the forced frequency at the base. At this aim, short acceleration records have been acquired simultaneously in 20 points of the tower at different levels, due to a series of sinusoidal forced vibrations applied at the base by using a pneumatic shaker device specify designed for the tests. The proposed procedure permit to extract for each monitored point the amplitude of the sinusoidal component related to the excitation frequency and the phase shift due to the structure damping. The results of the proposed procedure are compared with the results of a classical operational modal analysis in environmental conditions in order to demonstrate that the short forced tests permit to classify the typology of the structure mode shapes.

scholarly journals Experimental and Simulation Modal Analysis of a Prismatic Battery Module

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2046 ◽  
Author(s):  
Bizhong Xia ◽  
Fan Liu ◽  
Chao Xu ◽  
Yifan Liu ◽  
Yongzhi Lai ◽  
...  
Keyword(s):  
Modal Analysis ◽  
Excitation Frequency ◽  
Experimental Results ◽  
Battery Pack ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Average Error ◽  
Clear Understanding ◽  
The Impact ◽  
Battery Module

The battery pack is the core component of a new energy vehicle (NEV), and reducing the impact of vibration induced resonance from the ground is a prerequisite for the safety of an NEV. For a high-performance battery pack design, a clear understanding of the structural dynamics of the key part of battery pack, such as the battery module, is of great significance. Additionally, a proper computational model for simulations of battery module also plays a key role in correctly predicting the dynamic response of battery packs. In this paper, an experimental modal analysis (EMA) was performed on a typical commercial battery module, composed of twelve 37Ah lithium nickel manganese cobalt oxide (NMC) prismatic cells, to obtain modal parameters such as mode shapes and natural frequencies. Additionally, three modeling methods for a prismatic battery module were established for the simulation modal analysis. The method of simplifying the prismatic cell to homogenous isotropic material had a better performance than the detailed modeling method, in predicting the modal parameters. Simultaneously, a novel method that can quickly obtain the equivalent parameters of the cell was proposed. The experimental results indicated that the fundamental frequency of battery module was higher than the excitation frequency range (0–150 Hz) from the ground. The mode shapes of the simulation results were in good agreement with the experimental results, and the average error of the natural frequency was below 10%, which verified the validity of the numerical model.

Effect of Bass Bar Tension on Modal Parameters of a Violin's Top Plate

2015 ◽  
Vol 39 (1) ◽  
pp. 145-149 ◽  
Author(s):  
Ewa B. Skrodzka ◽  
Bogumił B.J. Linde ◽  
Antoni Krupa
Keyword(s):  
Modal Analysis ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Normal Value ◽  
Modal Damping

Abstract Experimental modal analysis of a violin with three different tensions of a bass bar has been performed. The bass bar tension is the only intentionally introduced modification of the instrument. The aim of the study was to find differences and similarities between top plate modal parameters determined by a bass bar perfectly fitting the shape of the top plate, the bass bar with a tension usually applied by luthiers (normal), and the tension higher than the normal value. In the modal analysis four signature modes are taken into account. Bass bar tension does not change the sequence of mode shapes. Changes in modal damping are insignificant. An increase in bass bar tension causes an increase in modal frequencies A0 and B(1+) and does not change the frequencies of modes CBR and B(1-).

scholarly journals Comparison of Mode Shapes of Carbon-Fiber-Reinforced Plastic Material Considering Carbon Fiber Direction

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 311
Author(s):  
Chan-Jung Kim
Keyword(s):  
Carbon Fiber ◽  
Modal Analysis ◽  
Dynamic Behavior ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Carbon Fiber Reinforced Plastic ◽  
Fiber Direction ◽  
Fiber Reinforced ◽  
Fiber Reinforced Plastic ◽  
Reinforced Plastic

Previous studies have demonstrated the sensitivity of the dynamic behavior of carbon-fiber-reinforced plastic (CFRP) material over the carbon fiber direction by performing uniaxial excitation tests on a simple specimen. However, the variations in modal parameters (damping coefficient and resonance frequency) over the direction of carbon fiber have been partially explained in previous studies because all modal parameters have only been calculated using the representative summed frequency response function without modal analysis. In this study, the dynamic behavior of CFRP specimens was identified from experimental modal analysis and compared five CFRP specimens (carbon fiber direction: 0°, 30°, 45°, 60°, and 90°) and an isotropic SCS13A specimen using the modal assurance criterion. The first four modes were derived from the SCS13A specimen; they were used as reference modes after verifying with the analysis results from a finite element model. Most of the four mode shapes were found in all CFRP specimens, and the similarity increased when the carbon fiber direction was more than 45°. The anisotropic nature was dominant in three cases of carbon fiber, from 0° to 45°, and the most sensitive case was found in Specimen #3.

The Use of Modan 3D in Experimental Modal Analysis

2013 ◽  
Vol 486 ◽  
pp. 36-41 ◽  
Author(s):  
Róbert Huňady ◽  
František Trebuňa ◽  
Martin Hagara ◽  
Martin Schrötter
Keyword(s):  
Modal Analysis ◽  
Vibration Analysis ◽  
High Speed ◽  
Mechanical Vibration ◽  
Steel Sample ◽  
Experimental Modal Analysis ◽  
Image Correlation ◽  
Optical Methods ◽  
Mode Shapes ◽  
Vibration Modes

Experimental modal analysis is a relatively young part of dynamics, which deals with the vibration modes identification of machines or their parts. Its development has started since the beginning of the eighties, when the computers hardware equipment has improved and the fast Fourier transform (FFT) could be used for the results determination. Nowadays it provides an uncountable set of vibration analysis possibilities starting with conventional contact transducers of acceleration and ending with modern noncontact optical methods. In this contribution we mention the use of high-speed digital image correlation by experimental determination of mode shapes and modal frequencies. The aim of our work is to create a program application called Modan 3D enabling the performing of experimental modal analysis and operational modal analysis. In this paper the experimental modal analysis of a thin steel sample performed with Q-450 Dantec Dynamics is described. In Modan 3D the experiment data were processed and the vibration modes were determined. The reached results were verified by PULSE modulus specialized for mechanical vibration analysis.

Identifying VIV Vibration Modes by Use of the Empirical Orthogonal Functions Technique

2002 ◽  
Author(s):  
Gudmund Kleiven
Keyword(s):  
Model Test ◽  
Vibration Mode ◽  
Multivariate Data ◽  
Empirical Orthogonal Functions ◽  
Mode Shapes ◽  
Data Sets ◽  
Vibration Modes ◽  
Ocean Engineering ◽  
Orthogonal Functions ◽  
Related Technique

The Empirical Orthogonal Functions (EOF) technique has widely being used by oceanographers and meteorologists, while the Singular Value Decomposition (SVD being a related technique is frequently used in the statistics community. Another related technique called Principal Component Analysis (PCA) is observed being used for instance in pattern recognition. The predominant applications of these techniques are data compression of multivariate data sets which also facilitates subsequent statistical analysis of such data sets. Within Ocean Engineering the EOF technique is not yet widely in use, although there are several areas where multivariate data sets occur and where the EOF technique could represent a supplementary analysis technique. Examples are oceanographic data, in particular current data. Furthermore data sets of model- or full-scale data of loads and responses of slender bodies, such as pipelines and risers are relevant examples. One attractive property of the EOF technique is that it does not require any a priori information on the physical system by which the data is generated. In the present paper a description of the EOF technique is given. Thereafter an example on use of the EOF technique is presented. The example is analysis of response data from a model test of a pipeline in a long free span exposed to current. The model test program was carried out in order to identify the occurrence of multi-mode vibrations and vibration mode amplitudes. In the present example the EOF technique demonstrates the capability of identifying predominant vibration modes of inline as well as cross-flow vibrations. Vibration mode shapes together with mode amplitudes and frequencies are also estimated. Although the present example is not sufficient for concluding on the applicability of the EOF technique on a general basis, the results of the present example demonstrate some of the potential of the technique.

Analysis of Modal Parameters of Adhesively Bonded Double-Strap Joints by the Modal Strain Energy Method

1993 ◽  
Author(s):  
Mohan D. Rao ◽  
Krishna M. Gorrepati
Keyword(s):  
Strain Energy ◽  
Natural Frequencies ◽  
Structural Parameters ◽  
Flexural Vibration ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Adhesively Bonded ◽  
Modal Strain Energy ◽  
Joint System ◽  
Damping Material

Abstract This paper presents the analysis of modal parameters (natural frequencies, damping ratios and mode shapes) of a simply supported beam with adhesively bonded double-strap joint by the finite-element based Modal Strain Energy (MSE) method using ANSYS 4.4A software. The results obtained by the MSE method are compared with closed form analytical solutions previously obtained by the first author for flexural vibration of the same system. Good agreement has been obtained between the two methods for both the natural frequencies and system loss factors. The effects of structural parameters and material properties of the adhesive on the modal properties of the joint system are also studied which are useful in the design of the joint system for passive vibration and noise control. In order to evaluate the MSE and analytical results, some experiments were conducted using aluminum double-strap joint with 3M ISD112 damping material. The experimental results agreed well with both analytical and MSE results indicating the validity of both analytical and MSE methods. Finally, a comparative study has been conducted using various commercially available damping materials to evaluate their relative merits for use in the design of these joints.

scholarly journals Genetic and no genetic variability of two-year old seedlings of 13 hybrid plane half-sib lines

2005 ◽  
pp. 69-85 ◽  
Author(s):  
Radmila Knezevic ◽  
Mirjana Sijacic-Nikolic
Keyword(s):  
Genetic Variability ◽  
Environmental Conditions ◽  
Hybrid Sterility ◽  
Soil Humidity ◽  
Frequent Mutations ◽  
Different Levels ◽  
Partial Hybrid

This paper presents the results of the analysis of variability of 8 analyzed morph metric parameters in two-year old seedlings of 13 half-sib lines at different levels. The recorded genetic and no genetic variability is conditioned by numerous different factors. The important causes of genetic variability are: partial incompatibility of parent trees, partial hybrid sterility, predominant inbreeding, frequent mutations with the growth of parent trees, very abundant gene recombination's, etc. The causes of no genetic seedling variability are: external environmental conditions (soil humidity, conditions of cultivation, sylvotechnical interventions, etc) and the internal or the somatic environment of seedling.

Free Vibration of Damaged Beam Structure with a Notch Defect

2012 ◽  
Vol 226-228 ◽  
pp. 44-47 ◽  
Author(s):  
Jiang Yi Chen ◽  
Li Ge Fan ◽  
Dong Chen Qin
Keyword(s):  
Damage Identification ◽  
Delta Function ◽  
Theoretical Background ◽  
Mode Shapes ◽  
Modal Parameters ◽  
Beam Structure ◽  
Arbitrary Boundary ◽  
Numerical Examples ◽  
Elastically Supported ◽  
Universal Expression

In this paper, we derive the universal expression of the modal parameters for a damaged beam under arbitrary boundary conditions. The delta function is first employed to describe a notch damage in the beam and consequently to derive the governing equation for the damaged beam. Second, by virtue of the perturbation method, the eigenvalues and the corresponding mode shapes are obtained for the damaged beam. Finally, numerical examples are given for an elastically supported beam. It is believed that the proposed approach could provide the necessary theoretical background for damage identification in beam structures.

Vibrational characteristics of an earth dam

1966 ◽  
Vol 56 (6) ◽  
pp. 1207-1226
Author(s):  
W. O. Keightley
Keyword(s):  
Theoretical Analysis ◽  
Natural Frequencies ◽  
Forced Vibrations ◽  
Earth Dam ◽  
Mode Shapes ◽  
Modal Damping ◽  
Vibrational Characteristics ◽  
Good Agreement ◽  
Lower Frequencies

Abstract An earth dam was excited into vibrations, in the upstream-downstream direction, by four rotating eccentric-mass vibration generators which were operated on the crest. Natural frequencies, mode shapes, and equivalent viscous modal damping constants of the dam were revealed by the forced vibrations. A theoretical analysis of the dam, based on consideration of shearing deformations only, shows moderately good agreement with the behavior which was observed at the lower frequencies.

In-Plane Vibration Modes of Arbitrarily Thick Disks

1997 ◽  
Author(s):  
Kevin I. Tzou ◽  
Jonathan A. Wickert ◽  
Adnan Akay
Keyword(s):  
Natural Frequencies ◽  
Arbitrary Dimension ◽  
Three Dimensional ◽  
Mode Shapes ◽  
Vibration Modes ◽  
Three Dimensional Model ◽  
Bending Vibration ◽  
Annular Disk ◽  
Out Of Plane ◽  
Plane Bending

Abstract The three-dimensional vibration of an arbitrarily thick annular disk is investigated for two classes of boundary conditions: all surfaces traction-free, and all free except for the clamped inner radius. These two models represent limiting cases of such common engineering components as automotive and aircraft disk brakes, for which existing models focus on out-of-plane bending vibration. For a disk of significant thickness, vibration modes in which motion occurs within the disk’s equilibrium plane can play a substantial role in setting its dynamic response. Laboratory experiments demonstrate that in-plane modes exist at frequencies comparable to those of out-of-plane bending even for thickness-to-diameter ratios as small as 10−1. The equations for three-dimensional motion are discretized through the Ritz technique, yielding natural frequencies and mode shapes for coupled axial, radial, and circumferential deformations. This treatment is applicable to “disks” of arbitrary dimension, and encompasses classical models for plates, bars, cylinders, rings, and shells. The solutions so obtained converge in the limiting cases to the values expected from the classical theories, and to ones that account for shear deformation and rotary inertia. The three-dimensional model demonstrates that for geometries within the technologically-important range, the natural frequencies of certain in- and out-of-plane modes can be close to one another, or even identically repeated.

Sign in / Sign up

Export Citation Format

Share Document