scholarly journals Control of Pore Diameter of Porous Silica by Sol-Gel Coating

1995 ◽  
Vol 103 (1203) ◽  
pp. 1201-1204
Author(s):  
Yoshiro MORIYA ◽  
Hidenori SHIMODA ◽  
Ryoji HINO
Keyword(s):  
Pore Diameter ◽  
Sol Gel ◽  
Porous Silica

scholarly journals Silica Sol-Gel Entrapment of the Enzyme Chloroperoxidase

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Tuan Le ◽  
Selina Chan ◽  
Bassem Ebaid ◽  
Monika Sommerhalter
Keyword(s):  
Pore Diameter ◽  
Sol Gel ◽  
Porous Silica ◽  
Catalytic Performance ◽  
Relative Activity ◽  
Silica Sol ◽  
Average Pore ◽  
Visible Absorption ◽  
Gel Beads ◽  
Methanol Exposure

The enzyme chloroperoxidase (CPO) was immobilized in silica sol-gel beads prepared from tetramethoxysilane. The average pore diameter of the silica host structure (~3 nm) was smaller than the globular CPO diameter (~6 nm) and the enzyme remained entrapped after sol-gel maturation. The catalytic performance of the entrapped enzyme was assessed via the pyrogallol peroxidation reaction. Sol-gel beads loaded with 4 μg CPO per mL sol solution reached 9–12% relative activity compared to free CPO in solution. Enzyme kinetic analysis revealed a decrease inkcatbut no changes inKMorKI. Product release or enzyme damage might thus limit catalytic performance. Yet circular dichroism and visible absorption spectra of transparent CPO sol-gel sheets did not indicate enzyme damage. Activity decline due to methanol exposure was shown to be reversible in solution. To improve catalytic performance the sol-gel protocol was modified. The incorporation of 5, 20, or 40% methyltrimethoxysilane resulted in more brittle sol-gel beads but the catalytic performance increased to 14% relative to free CPO in solution. The use of more acidic casting buffers (pH 4.5 or 5.5 instead of 6.5) resulted in a more porous silica host reaching up to 18% relative activity.

scholarly journals Photocatalytic activity of Pr-modified TiO2 for the degradation of bisphenol A

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Denise S. Cordeiro ◽  
Fernando L. Cassio ◽  
Larissa Ciccotti ◽  
Thiago L. R. Hewer ◽  
Paola Corio ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Bisphenol A ◽  
Pore Diameter ◽  
Sol Gel ◽  
Bandgap Energy ◽  
Photocatalytic Efficiency ◽  
Average Pore ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Adsorption Desorption

AbstractPraseodymium doped TiO2 nanoparticles were successfully prepared by the sol–gel method and characterized by X-ray powder diffraction, N2 adsorption–desorption isotherm, and UV–vis spectroscopy. The effects of the dopant on the crystallite size, specific surface area, average pore diameter, pore volume, and bandgap energy were investigated. The photocatalytic activity of the catalysts was evaluated by bisphenol A degradation and mineralization, which is a representative endocrine disruptor. Furthermore, under visible light irradiation the Pr-modified TiO2 photocatalysts exhibited higher photocatalytic efficiency than unmodified TiO2. When praseodymium was loaded (1.0–5.0%) onto the surface of TiO2, the rates of degradation and mineralization were increased 3–5 times.

scholarly journals Development of Novel Oral Formulations of Disulfide Antioxidants Based on Porous Silica for Controlled Release of the Drugs

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 963
Author(s):  
Ekaterina S. Dolinina ◽  
Elena V. Parfenyuk
Keyword(s):  
Antioxidant Activity ◽  
Surface Chemistry ◽  
Sol Gel ◽  
Porous Silica ◽  
The Body ◽  
Oral Drug ◽  
Therapeutic Concentration ◽  
Release Process ◽  
Zero Order Kinetics ◽  
Long Time

Powerful antioxidant α-lipoic acid (LA) exhibits limited therapeutic efficiency due to its pharmacokinetic properties. Therefore, the purpose of this work was to evaluate the ability of silica-based composites of LA as well as its amide (lipoamide, LM), as new oral drug formulations, to control their release and maintain their therapeutic concentration and antioxidant activity in the body over a long time. The composites synthesized at different sol–gel synthesis pH and based on silica matrixes with various surface chemistry were investigated. The release behavior of the composites in media mimicking pH of digestive fluids (pH 1.6, 6.8, and 7.4) was revealed. The effects of chemical structure of the antioxidants, synthesis pH, surface chemistry of the silica matrixes in the composites as well as the pH of release medium on kinetic parameters of the drug release and mechanisms of the process were discussed. The comparative analysis of the obtained data allowed the determination of the most promising composites. Using these composites, modeling of the release process of the antioxidants in accordance with transit conditions of the drugs in stomach, proximal, and distal parts of small intestine and colon was carried out. The composites exhibited the release close to the zero order kinetics and maintained the therapeutic concentration of the drugs and antioxidant effect in all parts of the intestine for up to 24 h. The obtained results showed that encapsulation of LA and LM in the silica matrixes is a promising way to improve their bioavailability and antioxidant activity.

Bioencapsulation in Sol-Gel Glasses

1998 ◽  
Vol 519 ◽  
Author(s):  
L. Bergogne ◽  
S. Fennouh ◽  
J. Livage ◽  
C. Roux
Keyword(s):  
Sol Gel ◽  
Porous Silica ◽  
Silica Matrix ◽  
Whole Cells ◽  
The Past ◽  
Wide Range ◽  
Activity Of Enzymes ◽  
Gel Glasses ◽  
Micro Organisms

AbstractBioencapsulation in sol-gel materials has been widely studied during the past decade. Trapped species appear to retain their bioactivity in the porous silica matrix. Small analytes can diffuse through the pores allowing bioreactions to be performed in-situ, inside the sol-gel glass. A wide range of biomolecules and micro-organisms have been encapsulated. The catalytic activity of enzymes is used for the realization of biosensors or bioreactors. Antibody-antigen recognition has been shown to be feasible within sol-gel matrices. Trapped antibodies bind specifically the corresponding haptens and can be used for the detection of traces of chemicals. Even whole cells are now encapsulated without any alteration of their cellular organization. They can be used for the production of chemicals or as antigens for immunoassays.

Preparation of Porous Organically-Modified Silicate Hybrids for Cell Culture Matrix

2007 ◽  
Vol 330-332 ◽  
pp. 1177-1180 ◽  
Author(s):  
Kanji Tsuru ◽  
Satoshi Hayakawa ◽  
Yuki Shirosaki ◽  
T. Okayama ◽  
K. Kataoka ◽  
...  
Keyword(s):  
Cell Culture ◽  
Mammalian Cells ◽  
Pore Diameter ◽  
Sol Gel ◽  
Three Dimensional ◽  
Culture Methods ◽  
Organically Modified ◽  
Dimensional Cell

Porous & rubbery organic-inorganic hybrids were synthesized from tetraethoxysilane (TEOS) and polydimethylsiloxane (PDMS) through a sol-gel route using sieved sucrose granules as a porogen. The porous hybrids with a high content of PDMS behaved like polymer sponge. The porosity was over 90% irrespective of the hybrid composition and the pore diameter ranged from 100 to 500 μm. In the three-dimensional cell culture, mammalian cells were well cultured in the porous hybrids. The present results indicate that the hybrids may be a promising scaffold for developing such functional culture methods.

Sol-Gel Derived Silica Layers for Low-k Dielectrics Applications

2000 ◽  
Vol 612 ◽  
Author(s):  
Sylvie Acosta ◽  
André Ayral ◽  
Christian Guizard ◽  
Charles Lecornec ◽  
Gérard Passemard ◽  
...  
Keyword(s):  
Average Pore Size ◽  
Sol Gel ◽  
Porous Silica ◽  
Thin Layers ◽  
Gaseous Ammonia ◽  
Potential Candidate ◽  
Average Pore ◽  
Synthesis Strategy ◽  
Silica Layers ◽  
Highly Porous

AbstractPorous silica exhibits attractive dielectric properties, which make it a potential candidate for use as insulator into interconnect structures. A new way of preparation of highly porous silica layers by the sol-gel route was investigated and is presented. The synthesis strategy was based on the use of common and low toxicity reagents and on the development of a simple process without gaseous ammonia post-treatment or supercritical drying step. Defect free layers were deposited by spin coating on 200 mm silicon wafers and characterized. Thin layers with a total porosity larger than 70% and an average pore size of 5 nm were produced. The dielectric constant measured under nitrogen flow on these highly porous layers is equal to ∼ 2.5, which can be compared to the value calculated from the measured porosity, ∼ 1.9. This difference is explained by the presence of water adsorbed on the hydrophilic surface of the unmodified silica.

Humidity Effects on Porous Silica Thin Films

1995 ◽  
Vol 411 ◽  
Author(s):  
J. R. Kokan ◽  
R. A. Gerhardt
Keyword(s):  
Thin Films ◽  
Ac Conductivity ◽  
Sol Gel ◽  
Porous Silica ◽  
Controlled Environment ◽  
Alkali Ions ◽  
Humidity Effects ◽  
Silica Thin Films ◽  
Environment Chamber ◽  
Humidity Sensitivity

ABSTRACTImpedance Spectroscopy is being used to study the humidity sensitivity of porous silica thin films. The films are processed via a colloidal sol-gel method which leaves some remnant potassium and sodium. Previous work on bulk porous silica samples processed by the same method showed that the dielectric properties and ac conductivity were very sensitive to changes in humidity. The aim of this work was to determine if the same dependencies could be found in the thin films. The capacitance, dielectric loss, and ac conductivity of the films were measured in a controlled environment chamber from 20–80% RH for frequencies ranging from 10Hz–10MHz. In addition to characterizing films with varying amounts of residual alkali ions obtained through leaching, we have also measured films that were surface doped with controlled amounts of KCl, LiCl, or NaCl. Relative humidity dependencies in the films are not as dramatic as in the bulk samples. The reasons for this behavior are not yet clear, but may be associated with the porosity, thickness, and surface area of the films.

Sign in / Sign up

Export Citation Format

Share Document