scholarly journals Silica Sol-Gel Entrapment of the Enzyme Chloroperoxidase

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Tuan Le ◽  
Selina Chan ◽  
Bassem Ebaid ◽  
Monika Sommerhalter
Keyword(s):  
Pore Diameter ◽  
Sol Gel ◽  
Porous Silica ◽  
Catalytic Performance ◽  
Relative Activity ◽  
Silica Sol ◽  
Average Pore ◽  
Visible Absorption ◽  
Gel Beads ◽  
Methanol Exposure

The enzyme chloroperoxidase (CPO) was immobilized in silica sol-gel beads prepared from tetramethoxysilane. The average pore diameter of the silica host structure (~3 nm) was smaller than the globular CPO diameter (~6 nm) and the enzyme remained entrapped after sol-gel maturation. The catalytic performance of the entrapped enzyme was assessed via the pyrogallol peroxidation reaction. Sol-gel beads loaded with 4 μg CPO per mL sol solution reached 9–12% relative activity compared to free CPO in solution. Enzyme kinetic analysis revealed a decrease inkcatbut no changes inKMorKI. Product release or enzyme damage might thus limit catalytic performance. Yet circular dichroism and visible absorption spectra of transparent CPO sol-gel sheets did not indicate enzyme damage. Activity decline due to methanol exposure was shown to be reversible in solution. To improve catalytic performance the sol-gel protocol was modified. The incorporation of 5, 20, or 40% methyltrimethoxysilane resulted in more brittle sol-gel beads but the catalytic performance increased to 14% relative to free CPO in solution. The use of more acidic casting buffers (pH 4.5 or 5.5 instead of 6.5) resulted in a more porous silica host reaching up to 18% relative activity.

scholarly journals Photocatalytic activity of Pr-modified TiO2 for the degradation of bisphenol A

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Denise S. Cordeiro ◽  
Fernando L. Cassio ◽  
Larissa Ciccotti ◽  
Thiago L. R. Hewer ◽  
Paola Corio ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Bisphenol A ◽  
Pore Diameter ◽  
Sol Gel ◽  
Bandgap Energy ◽  
Photocatalytic Efficiency ◽  
Average Pore ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Adsorption Desorption

AbstractPraseodymium doped TiO2 nanoparticles were successfully prepared by the sol–gel method and characterized by X-ray powder diffraction, N2 adsorption–desorption isotherm, and UV–vis spectroscopy. The effects of the dopant on the crystallite size, specific surface area, average pore diameter, pore volume, and bandgap energy were investigated. The photocatalytic activity of the catalysts was evaluated by bisphenol A degradation and mineralization, which is a representative endocrine disruptor. Furthermore, under visible light irradiation the Pr-modified TiO2 photocatalysts exhibited higher photocatalytic efficiency than unmodified TiO2. When praseodymium was loaded (1.0–5.0%) onto the surface of TiO2, the rates of degradation and mineralization were increased 3–5 times.

Silica Sol-Gel Supported Nickel Nano-Catalyst for Hydrogen Production Using Microreactors

2005 ◽  
Vol 885 ◽  
Author(s):  
Krithi Shetty ◽  
Shihuai Zhao ◽  
Wei Cao ◽  
Naidu V. Seetala ◽  
Debasish Kuila
Keyword(s):  
Steam Reforming ◽  
Average Pore Size ◽  
Sol Gel ◽  
Supported Catalyst ◽  
Silica Sol ◽  
Average Pore ◽  
Steam Reforming Of Methanol ◽  
Nano Catalyst ◽  
Before And After ◽  
Reforming Reactions

ABSTRACTThe goal of this research is to investigate the activities of a non-noble nano-catalyst (Ni/SiO2) using Si-microreactors for steam reforming of methanol to produce hydrogen for fuel cells. The supported catalyst was synthesized by sol-gel method using Ni (II) salts and Si(C2H5O)4 as starting materials. EDX results indicate that the actual loading of Ni (5-6%) is lower than the intended loading of 12 %. The specific surface area of the silica sol-gel encapsulated Ni nano-catalyst is 452 m2/g with an average pore size of ∼ 3 nm. Steam reforming reactions have been carried out in a microreactor with 50 µm channels in the temperature range of 180-240 °C and atmospheric pressure. Results show 53% conversion of methanol with a selectivity of 74 % to hydrogen at 5 l/min and 200 °C. The magnetic properties of the catalysts were performed using a Vibrating Sample Magnetometer (VSM) to study the activity of the catalysts before and after the steam reforming reactions. The VSM results indicate much higher activity in the microreactor compared to macro-reactor and Ni forms non-ferromagnetic species faster in the microreactor.

Sol-Gel Derived Silica Layers for Low-k Dielectrics Applications

2000 ◽  
Vol 612 ◽  
Author(s):  
Sylvie Acosta ◽  
André Ayral ◽  
Christian Guizard ◽  
Charles Lecornec ◽  
Gérard Passemard ◽  
...  
Keyword(s):  
Average Pore Size ◽  
Sol Gel ◽  
Porous Silica ◽  
Thin Layers ◽  
Gaseous Ammonia ◽  
Potential Candidate ◽  
Average Pore ◽  
Synthesis Strategy ◽  
Silica Layers ◽  
Highly Porous

AbstractPorous silica exhibits attractive dielectric properties, which make it a potential candidate for use as insulator into interconnect structures. A new way of preparation of highly porous silica layers by the sol-gel route was investigated and is presented. The synthesis strategy was based on the use of common and low toxicity reagents and on the development of a simple process without gaseous ammonia post-treatment or supercritical drying step. Defect free layers were deposited by spin coating on 200 mm silicon wafers and characterized. Thin layers with a total porosity larger than 70% and an average pore size of 5 nm were produced. The dielectric constant measured under nitrogen flow on these highly porous layers is equal to ∼ 2.5, which can be compared to the value calculated from the measured porosity, ∼ 1.9. This difference is explained by the presence of water adsorbed on the hydrophilic surface of the unmodified silica.

Preparation of Novel Ag–Si–TiO2 Composite and Research on Its Photocatalytic Degradation of Formaldehyde

2021 ◽  
Vol 13 (3) ◽  
pp. 371-380
Author(s):  
Yongjun Wu ◽  
Nina Xie ◽  
Lu Yu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Removal Rate ◽  
Sol Gel ◽  
Catalytic Performance ◽  
Formaldehyde Concentration ◽  
Order Kinetic ◽  
Solution Ph ◽  
Visible Absorption ◽  
X Ray ◽  
Co Doped

A novel Ag–Si–TiO2 composite was prepared via sol–gel method for removing residual formaldehyde in shiitake mushroom. The structure of Ag–Si–TiO2 composite was characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses. Ultraviolet-visible absorption spectroscopy (UV-Vis) and N2 adsorption-desorption tests showed that Ag and Si co-doped decreased the band gap, the Brunauer-Emmett-Teller (BET) specific surface area of the samples increased and the recombination probability of electron-hole pairs (e--h+) reduced. Effect on removal rate of formaldehyde with different Ag-Si co-doped content, formaldehyde concentration and solution pH were investigated, and the results showed that 6.0 wt%Ag-3.0 wt%Si-TiO2 samples had an optimum catalytic performance, and the degradation efficiency reached 96.6% after 40 W 365 nm UV lamp irradiation for 360 min. The kinetics of formaldehyde degradation by Ag–Si–TiO2 composite photocatalyst could be described by Langmuir-Hinshelwood first-order kinetic model.

Synthesis of Hollow Titania Photocatalytic Particles Using Yeast as Templates

2013 ◽  
Vol 699 ◽  
pp. 126-132 ◽  
Author(s):  
Toshiyuki Nomura ◽  
Syota Tanii ◽  
Hayato Tokumoto ◽  
Yasuhiro Konishi
Keyword(s):  
Pore Diameter ◽  
Sol Gel ◽  
Solid Particles ◽  
Core Shell ◽  
Average Pore ◽  
Inorganic Particles ◽  
Sol Gel Process ◽  
Yeast Powder ◽  
Titania Precursor ◽  
Hydrolysis Of

Hollow inorganic particles have attracted considerable interest for a variety of applications. In this work, yeast powder was used as a bio-template to fabricate yeast/titania core-shell spheres. A titania precursor was deposited via the hydrolysis of tetraisopropyl titanate. Triethanolamine was employed to control the reaction rate of the sol-gel process. The hollow titania particles with a diameter of approximately 4 m and a thickness of approximately 54 nm were successfully obtained after calcination of the core-shell spheres at 700 °C. The crystal structure of the particles was anatase. The specific surface area and the average pore diameter were 21.4 m2/g and 1.6 nm, respectively. The photocatalytic activity of the hollow particles was higher compared with that of solid particles.

Preparation and Research of Porous Hydroxyapatite Whiskers/KGM Composite Bone Scaffolds

2013 ◽  
Vol 712-715 ◽  
pp. 415-419
Author(s):  
Ming Hua Huang ◽  
Qing Hua Chen ◽  
Li Lei ◽  
Duan Cheng Wang ◽  
Ting Ting Yan
Keyword(s):  
Compressive Strength ◽  
Degradation Rate ◽  
Pore Diameter ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
Average Pore Diameter ◽  
Average Pore ◽  
Bone Scaffolds ◽  
Composite Bone

Sol-gel method and freeze-drying method were adopted to prepare the porous HAPw/KGM composite bone scaffolds and ammonia was used as a crosslinking agent. The porosity, average pore diameter, compressive strength and degradation rate in vitro were measured according to the related standard. The curves of each factor and lever affecting comprehensive properties were drew through the orthogonal design L9 (34) experiment. SEM and XRD were applied in characterization. The results show that the optimal preparation program of the composite scaffolds is KGM (2g), HAPw (4.5g), ammonia (0.1 ml) and the freeze temperature (-20 ° C); the prepared scaffolds are porous three-dimensional network structures; the porosity of optimal scaffold is more than 90%; the average pore diameter is between 200-300μm; the compressive strength is about 0.8Mpa and the degradation rate is about 50% within 9 weeks.

Synthesis of Nanostructured Tin Oxide by Sol–Gel and Sonochemical Approaches in an Ionic Liquid

2018 ◽  
Vol 232 (2) ◽  
pp. 245-256 ◽  
Author(s):  
Hala K. Farag ◽  
Hussein Abbas
Keyword(s):  
Ionic Liquid ◽  
Surface Area ◽  
Tin Oxide ◽  
Pore Diameter ◽  
Sol Gel ◽  
Sonochemical Method ◽  
Average Pore ◽  
Gel Method ◽  
Sol Gel Method ◽  
Tin Oxide Nanoparticles

AbstractThe present paper shows a comparative study on the synthesis of nanostructured tin oxide in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIm]TfO) by sol–gel and sonochemical methods. The XRD results of the synthesized materials revealed the formation of single tetragonal phase of SnO2by sol–gel method whereas a mixture of tetragonal SnO and orthorhombic SnO2phases was obtained by the sonochemical method. The sonochemical approach led to the formation of finer nanoparticales with a higher specific surface area than that of the sol–gel synthesized oxide. The average sizes of tin oxide nanoparticles were found to be about 30 nm and 15 nm for the particles obtained by sol–gel and sonochemical methods, respectively. The surface area of SnO2nanopowder obtained by the sol–gel method (calcined at 500 °C) was estimated to be 11.6 m2g−1, and the mean pore diameter was found to be 6.33 nm. Whereas the mixed SnO/SnO2sample (calcined at 500 °C) obtained by the sonochemical method exhibited a higher surface area of 43.11 m2g−1and an average pore diameter of 1.90 nm. The band gap of the synthesized tin oxides was estimated from the UV-vis. results to be 4.01 and 4.25 eV for the sol–gel and sonochemically synthesized samples, respectively.

Optical Sol-Gel Materials Based on Binding and Catalysis by Biomolecules

1994 ◽  
Vol 346 ◽  
Author(s):  
Jeffrey I. Zink ◽  
Bruce Dunn ◽  
Stacey Yamanaka ◽  
Esther Lan ◽  
J. S. Valentine ◽  
...  
Keyword(s):  
Silica Glass ◽  
Glucose Sensor ◽  
Sol Gel ◽  
Porous Silica ◽  
Spectroscopic Properties ◽  
Colored Glass ◽  
Visible Absorption ◽  
Copper Zinc Superoxide Dismutase ◽  
Immobilized Proteins ◽  
Glass Matrices

ABSTRACTThe proteins copper-zinc Superoxide dismutase (CuZnSOD), cytochrome c, myoglobin, hemoglobin, and bacterio-rhodopsin are encapsulated in stable, optically transparent, porous, silica glass matrices prepared by the sol-gel method such that the biomolecules retain their characteristic reactivities and spectroscopic properties. The resulting glasses allow transport of small molecules into and out of the glasses at reasonable rates but retain the protein molecules within their pores. The transparency of the glasses enables the chemical reactions of the immobilized proteins to be monitored by means of changes in their visible absorption spectra. Silica glasses containing the immobilized proteins have similar reactivities and spectroscopic properties to those found for the proteins in solution. The enzymes glucose oxidase and peroxidase were also encapsulated in transparent silica glass matrices. Upon exposure to glucose solutions, a colored glass is formed that can be used as the active element in a solid state optically based glucose sensor. Likewise, gels containing oxalate oxidase and peroxidase exhibit spectroscopic changes upon exposure to aqueous solutions containing oxalic acid.

scholarly journals Control of Pore Diameter of Porous Silica by Sol-Gel Coating

1995 ◽  
Vol 103 (1203) ◽  
pp. 1201-1204
Author(s):  
Yoshiro MORIYA ◽  
Hidenori SHIMODA ◽  
Ryoji HINO
Keyword(s):  
Pore Diameter ◽  
Sol Gel ◽  
Porous Silica
Sign in / Sign up

Export Citation Format

Share Document