scholarly journals Sight-Reading Versus Repertoire Performance on the Piano: A Case Study Using High-Speed Motion Analysis

2006 ◽  
Vol 21 (1) ◽  
pp. 10-16
Author(s):  
Brenda Wristen ◽  
Sharon Evans ◽  
Nicholas Stergiou
Keyword(s):  
Motion Analysis ◽  
Motion Capture ◽  
High Speed ◽  
Index Finger ◽  
Infrared Camera ◽  
Sight Reading ◽  
Camera System ◽  
Musical Excerpt ◽  
Angular Displacements

This study was intended to examine whether differences exist in the motions employed by pianists when they are sight-reading versus performing repertoire and to determine whether these differences can be quantified using high-speed motion capture technology. A secondary question of interest was whether or not an improvement in the efficiency of motion could be observed between two sight-reading trials of the same musical excerpt. This case study employed one subject and a six-camera digital infrared camera system to capture the motion of the pianist playing two trials of a repertoire piece and two trials of a sight-reading excerpt. Angular displacements and velocities were calculated for bilateral shoulder, elbow, wrist, and index finger joints. The findings demonstrate the usefulness of high-speed motion capture technology for analyzing motions of pianists during performance, showing that the subject's motions were less efficient in sight-reading tasks than is repertoire tasks.

scholarly journals Utility of a New Developed Motion Capture with Infrared Camera System in ACL-Insufficient Knees by the Comparison with the Validated Navigation System

2017 ◽  
Vol 33 (10) ◽  
pp. e80
Author(s):  
Eiichi Nakamura ◽  
Nobukazu Okamoto ◽  
Soichiro Yamabe ◽  
Tetsurou Masuda ◽  
Daisuke Shiraishi ◽  
...  
Keyword(s):  
Motion Capture ◽  
Navigation System ◽  
Infrared Camera ◽  
Camera System

Operative Ontologien – ein Versuch, einen klaren Begriff zu verunreinigen

2017 ◽  
Vol 8 (2) ◽  
pp. 187-192
Author(s):  
Gertrud Koch
Keyword(s):  
Motion Capture ◽  
Human Being ◽  
Visual Effects ◽  
Human Environment ◽  
Ontological Question ◽  
Media And Technology ◽  
Live Action ◽  
Capture Technique

"Operative Ontologien werden in diesem Artikel als relationale kommunikative Situationen vorgestellt, in denen Medien und Technik Teil einer Praxis sind, aber nicht einfach mit dieser zusammenfallen. Die Ontologie bezieht sich auf eine temporäre Konstellation, beispielsweise eine Verknüpfung von Maschine, Körper und Bild, in der die ontologische Frage der Anthropologie perspektivisch immer wieder verschoben wird. Wie das genau zu verstehen ist, wird am Fallbeispiel der Motion-Capture-Technik deutlich, in der durch eine Verschmelzung von Live Action Movie und der animierten Welt der Visual Effects eine permanente Veränderung dessen erfolgt, was als Mensch oder menschliche Umwelt angesehen wird. This article presents operational ontologies as communicative situations in which media and technology are part of a practice, but do not simply coincide with it. Ontology refers to a temporary constellation, for example a link between machine, body and image, which shifts the ontological question of anthropology in perspective time and again. This thesis is further illustrated by a case study of the motion capture technique, whose merging of live action movie and the animated world of visual effects leads to a permanent modification of our notions of the human being and human environment. "

scholarly journals Supermicrosurgical Suture-Stent Technique for A Lymphaticovenular Bypass

2021 ◽  
Vol 10 (12) ◽  
pp. 2595
Author(s):  
Ryo Karakawa ◽  
Hidehiko Yoshimatsu ◽  
Keisuke Kamiya ◽  
Yuma Fuse ◽  
Tomoyuki Yano
Keyword(s):  
Lower Extremity ◽  
Success Rate ◽  
Infrared Camera ◽  
Conventional Technique ◽  
Minimal Risk ◽  
Exclusion Criteria ◽  
Back Wall ◽  
Camera System ◽  
Good Patency

Background: Lymphaticovenular anastomosis (LVA) is a challenging procedure and requires a sophisticated supermicrosurgical technique. The aim of this study was to evaluate and establish a discrete supermicrosurgical anastomosis method using the “suture-stent technique”. Methods: Forty-eight LVA sites of twenty patients with lower extremity lymphedema who had undergone LVA between July 2020 and January 2021 were included in this study. LVA was performed with the conventional technique or with the suture-stent technique. The patency of the anastomoses was evaluated using an infrared camera system intraoperatively. The success rate on the first try and the final success rate for each group were compared. Results: After full application of the exclusion criteria, 35 LVAs of 16 patients including 20 limbs were included in the analysis. The ratio of good patency findings after anastomosis in the suture-stent technique group was 100%. The incidences of leakage or occlusion on the first try were statistically greater in the conventional technique group (29.4%) than in the suture-stent technique group (0%) (p = 0.0191). All anastomoses achieved good patency in the final results. Conclusion: With its minimal risk of catching the back wall during the anastomosis, the suture-stent technique can be considered an optimal anastomosis option for LVA.

Design of experimental food patches to measure foraging intensity for octopus: a case study with the giant Pacific octopus Enteroctopus dofleini

2020 ◽  
Author(s):  
Stephanie Chancellor ◽  
David Scheel ◽  
Joel S Brown
Keyword(s):  
Predation Risk ◽  
Foraging Behaviour ◽  
Habitat Preferences ◽  
High Tide ◽  
Intertidal Habitat ◽  
Camera System ◽  
Subtidal Habitat ◽  
Enteroctopus Dofleini ◽  
Nontarget Species

ABSTRACT In a study of the foraging behaviour of the giant Pacific octopus Enteroctopus dofleini, we designed two types of experimental food patches to measure habitat preferences and perceptions of predation risk. The first patch successfully measured giving-up densities (GUDs), confirmed by octopus prey presence and higher foraging at sites with historically greater octopus presence. However, nontarget foragers also foraged on these experimental food patches. Our second floating patch design successfully excluded nontarget species from subtidal patches, and from intertidal patches at high tide, but allowed for foraging by E. dofleini. The second design successfully measured GUDs and suggested that octopus preferred foraging in a subtidal habitat compared to an intertidal habitat. We ascribe the higher GUD in the intertidal habitat to its higher predation risk relative to the subtidal habitat. The second patch design seems well suited for E. dofleini and, in conjunction with a camera system, could be used to provide behavioural indicators of the octopus's abundance, perceptions of habitat quality and predation risk.

scholarly journals Influence of Hydrogeochemistry on Tunnel Drainage in Evaporitic Formations: El Regajal Tunnel Case Study (Aranjuez, Spain)

2021 ◽  
Vol 13 (3) ◽  
pp. 1505
Author(s):  
Ignacio Menéndez Pidal ◽  
Jose Antonio Mancebo Piqueras ◽  
Eugenio Sanz Pérez ◽  
Clemente Sáenz Sanz
Keyword(s):  
High Speed ◽  
Civil Engineering ◽  
Saturation Index ◽  
The Subject ◽  
Under Construction ◽  
Underground Flow ◽  
Very High ◽  
Over Time

Many of the large number of underground works constructed or under construction in recent years are in unfavorable terrains facing unusual situations and construction conditions. This is the case of the subject under study in this paper: a tunnel excavated in evaporitic rocks that experienced significant karstification problems very quickly over time. As a result of this situation, the causes that may underlie this rapid karstification are investigated and a novel methodology is presented in civil engineering where the use of saturation indices for the different mineral specimens present has been crucial. The drainage of the rock massif of El Regajal (Madrid-Toledo, Spain, in the Madrid-Valencia high-speed train line) was studied and permitted the in-situ study of the hydrogeochemical evolution of water flow in the Miocene evaporitic materials of the Tajo Basin as a full-scale testing laboratory, that are conforms as a whole, a single aquifer. The work provides a novel methodology based on the calculation of activities through the hydrogeochemical study of water samples in different piezometers, estimating the saturation index of different saline materials and the dissolution capacity of the brine, which is surprisingly very high despite the high electrical conductivity. The circulating brine appears unsaturated with respect to thenardite, mirabilite, epsomite, glauberite, and halite. The alteration of the underground flow and the consequent renewal of the water of the aquifer by the infiltration water of rain and irrigation is the cause of the hydrogeochemical imbalance and the modification of the characteristics of the massif. These modifications include very important loss of material by dissolution, altering the resistance of the terrain and the increase of the porosity. Simultaneously, different expansive and recrystallization processes that decrease the porosity of the massif were identified in the present work. The hydrogeochemical study allows the evolution of these phenomena to be followed over time, and this, in turn, may facilitate the implementation of preventive works in civil engineering.

scholarly journals The Optimization of Alternating Current Electrospun PA 6 Solutions Using a Visual Analysis System

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2098
Author(s):  
Tomas Kalous ◽  
Pavel Holec ◽  
Jakub Erben ◽  
Martin Bilek ◽  
Ondrej Batka ◽  
...  
Keyword(s):  
High Voltage ◽  
High Speed ◽  
Visual Analysis ◽  
Polyamide 6 ◽  
Alternating Current ◽  
Sine Wave ◽  
Electrospinning Process ◽  
Camera System ◽  
Polymeric Solutions ◽  
Analysis System

The electrospinning process that produces fine nanofibrous materials have a major disadvantage in the area of productivity. However, alternating current (AC) electrospinning might help to solve the problem via the modification of high voltage signal. The aforementioned productivity aspect can be observed via a camera system that focuses on the jet creation area and that measures the average lifespan. The paper describes the optimization of polyamide 6 (PA 6) solutions and demonstrates the change in the behavior of the process following the addition of a minor dose of oxoacid. This addition served to convert the previously unspinnable (using AC) solution to a high-quality electrospinning solution. The visual analysis of the AC electrospinning of polymeric solutions using a high-speed camera and a programmable power source was chosen as the method for the evaluation of the quality of the process. The solutions were exposed to high voltage applying two types of AC signal, i.e., the sine wave and the step change. All the recordings presented in the paper contained two sets of data: firstly, camera recordings that showed the visual expression of electrospinning and, secondly, signal recordings that provided information on the data position in the signal function.

Removing W Polymer Residue from BEOL Structures Using DSP+ (Dilute Sulfuric-Peroxide-HF) Mixture – A Case Study

2012 ◽  
Vol 195 ◽  
pp. 128-131 ◽  
Author(s):  
Hun Hee Lee ◽  
Min Sang Yun ◽  
Hyun Wook Lee ◽  
Jin Goo Park
Keyword(s):  
High Speed ◽  
Semiconductor Device ◽  
Environmental Issues ◽  
Low Power Consumption ◽  
Device Performance ◽  
Metal Gate ◽  
Feature Size ◽  
High K ◽  
Removal Of Metal

As the feature size of semiconductor device shrinks continuously, various high-K metals for 3-D structures have been applied to improve the device performance, such as high speed and low power consumption. Metal gate fabrication requires the removal of metal and polymer residues after etching process without causing any undesired etching and corrosion of metals. The conventional sulfuric-peroxide mixture (SPM) has many disadvantages like the corrosion of metals, environmental issues etc., DSP+(dilute sulfuric-peroxide-HF mixture) chemical is currently used for the removal of post etch residues on device surface, to replace the conventional SPM cleaning [. Due to the increased usage of metal gate in devices in recent times, the application of DSP+chemicals for cleaning processes also increases [.

High-Resolution Measurements at Nucleate Boiling of Pure FC-84 and FC-3284 and Its Binary Mixtures

2009 ◽  
Vol 131 (12) ◽  
Author(s):  
Enno Wagner ◽  
Peter Stephan
Keyword(s):  
Binary Mixtures ◽  
High Speed ◽  
Contact Region ◽  
Infrared Camera ◽  
Nucleate Boiling ◽  
Heated Wall ◽  
Rear Side ◽  
Phase Contact ◽  
Pure Fluids ◽  
Three Phase

In a special boiling cell, vapor bubbles are generated at single nucleation sites on top of a 20μm thick stainless steel heating foil. An infrared camera captures the rear side of the heating foil for analyzing the temperature distribution. The bubble shape is recorded through side windows with a high-speed camera. Global measurements were conducted, with the pure fluids FC-84 and FC-3284 and with its binary mixtures of 0.25, 0.5, and 0.75mole fraction. The heat transfer coefficient (HTC) in a binary mixture is less than the HTC in either of the single component fluid alone. Applying the correlation of Schlünder showed good agreement with the measurements (1982, “Über den Wärmeübergang bei der Blasenverdampfung von Gemischen,” Verfahrenstechnik, 16(9), pp. 692–698). Furthermore, local measurements were arranged with high lateral and temporal resolution for single bubble events. The wall heat flux was computed and analyzed, especially at the three-phase-contact line between liquid, vapor, and heated wall. The bubble volume and the vapor production rate were also investigated. For pure fluids, up to 50–60% of the latent heat flows through the three-phase-contact region. For mixtures, this ratio is clearly reduced and is about 35%.

Sign in / Sign up

Export Citation Format

Share Document