MODERN ALGAL MATS IN INTERTIDAL AND SUPRATIDAL QUARTZ SANDS, NORTHEASTERN MASSACHUSETTS, U.S.A.

1985 ◽  
pp. 211-223 ◽  
Author(s):  
BARRY CAMERON ◽  
DIANE CAMERON ◽  
J. RICHARD JONES
Keyword(s):  
Algal Mats ◽  
Quartz Sands

SURVEI POTENSI PASIR KUARSA DI DAERAH KETAPANG PROPINSI KALIMANTAN BARAT

2012 ◽  
Vol 11 (2) ◽  
Author(s):  
Teguh Prayogo ◽  
Bayu Budiman
Keyword(s):  
Glass Industry ◽  
Quartz Sand ◽  
Mineral Resources ◽  
Cement Industry ◽  
Laboratory Analysis ◽  
Rock Weathering ◽  
West Kalimantan ◽  
White Sand ◽  
Quartz Sands ◽  
Industrial Mineral

Ketapang area is one of lower part or southern sub-province of West Kalimanatan Province, which is located geographically between 108o40’ and 111o20’ in Longitude and between 0o20’ and 3o04’ in Latitude. This area has various of industrial mineral resources, for example quartz sand. Quartz sand or also calledwith white sand is the reasult of rock weathering that contents main mineral, such as quartz, and felsdpar. Then, the result of weathering is cleaned and transported by water or wind and deposited in the stream side, lake or sea. In this paper will bedescribed concerning to locations, characteristics, and usages of quratz sand in Ketapang area, West Kalimantan Province. Based on chemical or laboratory analysis and interpretation, the quartz sands can be used as glass industry, cement industry material, and moulding industry.

scholarly journals Rutile Mineral Chemistry and Zr-in-Rutile Thermometry in Provenance Study of Albian (Uppermost Lower Cretaceous) Terrigenous Quartz Sands and Sandstones in Southern Extra-Carpathian Poland

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 553
Author(s):  
Jakub Kotowski ◽  
Krzysztof Nejbert ◽  
Danuta Olszewska-Nejbert
Keyword(s):  
High Temperature ◽  
Source Area ◽  
Bimodal Distribution ◽  
Provenance Study ◽  
Eastern Group ◽  
Western Group ◽  
Quartz Sands ◽  
Probable Source ◽  
Eclogite Facies ◽  
Zr In Rutile

The geochemistry of detrital rutile grains, which are extremely resistant to weathering, was used in a provenance study of the transgressive Albian quartz sands in the southern part of extra-Carpathian Poland. Rutile grains were sampled from eight outcrops and four boreholes located on the Miechów, Szydłowiec, and Puławy Segments. The crystallization temperatures of the rutile grains, calculated using a Zr-in-rutile geothermometer, allowed for the division of the study area into three parts: western, central, and eastern. The western group of samples, located in the Miechów Segment, is characterized by a polymodal distribution of rutile crystallization temperatures (700–800 °C; 550–600 °C, and c. 900 °C) with a significant predominance of high-temperature forms, and with a clear prevalence of metapelitic over metamafic rutile. The eastern group of samples, corresponding to the Lublin Area, is monomodal and their crystallization temperatures peak at 550–600 °C. The contents of metapelitic to metamafic rutile in the study area are comparable. The central group of rutile samples with bimodal distribution (550–600 °C and 850–950 °C) most likely represents a mixing zone, with a visible influence from the western and, to a lesser extent, the eastern group. The most probable source area for the western and the central groups seems to be granulite and high-temperature eclogite facies rocks from the Bohemian Massif. The most probable source area for the eastern group of rutiles seems to be amphibolites and low temperature eclogite facies rocks, probably derived from the southern part of the Baltic Shield.

Removal of uranium from groundwater using zero-valent-iron coated quartz sands

2021 ◽  
Author(s):  
Weimin Zhang ◽  
Yihui Dong ◽  
Huidong Wang ◽  
Yadan Guo ◽  
Hua Zeng ◽  
...  
Keyword(s):  
Zero Valent Iron ◽  
Quartz Sands

Arsenic Removal from Wastewater Using Adsorptive Mediums

2011 ◽  
Vol 189-193 ◽  
pp. 404-409
Author(s):  
Fu Quan Peng ◽  
Zhen Cheng Xu ◽  
Jian Hong Huang ◽  
Qing Wei Guo ◽  
Feng Nie
Keyword(s):  
Arsenic Removal ◽  
Removal Rate ◽  
National Standards ◽  
Ferrous Oxide ◽  
Anion Resin ◽  
Quartz Sands ◽  
Long Time ◽  
Removal Of Arsenic ◽  
Adsorptive Properties

Different adsorptive mediums and adsorbents’ compounds were chosen to remove arsenic from Yangzonghai Lake wastewater. Results showed that Ca(OH)2, attapulgite, bentonite, LDHs these adsorptive mediums had adsorptive capacities of less than 2.5 mg/g of As removal and it took long time for sediment before monitoring; adsorbents compounds’ results showed Fe2O3 and quartz sands had best removal rate and quartz sands had little removal of arsenic. Both strong anion resin and hydrated ferrous oxide-loaded on polystyrene diethanolamine resin(designated as PDR-HFO) can decrease As concentration to less than 0.01 mg/L reaching national standards for arsenic; anions such as SO42- can not be removed when strong anion resin was regenerated causing its loss of exchange ions; PDR-HFO exhibited excellent adsorptive properties and recyclability.

Aerohydrodynamic concentration of quartz sands

1998 ◽  
Vol 39 (1-2) ◽  
pp. 67-69
Author(s):  
A. K. Brovtsyn ◽  
G. S. Chershneva
Keyword(s):  
Quartz Sands

Influence of aqueous film forming foams on the solubility and mobilization of non-aqueous phase liquid contaminants in quartz sands

2021 ◽  
Vol 195 ◽  
pp. 116975
Author(s):  
Shuchi Liao ◽  
Zachary Saleeba ◽  
J. Daniel Bryant ◽  
Linda M. Abriola ◽  
Kurt D. Pennell
Keyword(s):  
Aqueous Phase ◽  
Quartz Sands ◽  
Film Forming ◽  
Phase Liquid

Erosion characteristics on surface texture of additively manufactured AlSi10Mg alloy in SiO2 quartz added slurry environment

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Recep Demirsöz ◽  
Mehmet Erdl Korkmaz ◽  
Munish Kumar Gupta ◽  
Alberto Garcia Collado ◽  
Grzegorz M. Krolczyk
Keyword(s):  
Surface Roughness ◽  
Weight Loss ◽  
Wear Resistance ◽  
Erosive Wear ◽  
Oxide Ceramics ◽  
Slurry Erosion ◽  
Content Type ◽  
Test Setup ◽  
Quartz Sands ◽  
Erosion Test

Purpose The main purpose of this work is to explore the erosion wear characteristics of additively manufactured aluminium alloy. Additive manufacturing (AM), also known as three-dimensional (3D) manufacturing, is the process of manufacturing a part designed in a computer environment using different types of materials such as plastic, ceramic, metal or composite. Similar to other materials, aluminum alloys are also exposed to various wear types during operation. Production efficiency needs to be aware of its reactions to wearing mechanisms. Design/methodology/approach In this study, quartz sands (SiO2) assisted with oxide ceramics were used in the slurry erosion test setup and its abrasiveness on the AlSi10Mg aluminum alloy material produced by the 3D printer as selective laser melting (SLM) technology was investigated. Quartz was sieved with an average particle size of 302.5 µm, and a slurry environment containing 5, 10 and 15% quartz by weight was prepared. The experiments were carried out at the velocity of 1.88 (250 rpm), 3.76 (500 rpm) and 5.64 m/s (750 rpm) and the impact angles 15, 45 and 75°. Findings With these experimental studies, it has been determined that the abrasiveness of quartz sand prepared in certain particle sizes is directly related to the particle concentration and particle speed, and that the wear increases with the increase of the concentration and rotational speed. Also, the variation of weight loss and surface roughness of the alloy was investigated after different wear conditions. Surface roughness values at 750 rpm speed, 10% concentration and 75° impingement angle are 0.32 and 0.38 µm for 0 and 90° samples, respectively, with a difference of approximately 18%. Moreover, concerning a sample produced at 0°, the weight loss at 250 rpm at 10% concentration and 45° particle impact angle is 32.8 mg, while the weight loss at 500 rpm 44.4 mg, and weight loss at 750 rpm is 104 mg. Besides, the morphological structures of eroded surfaces were examined using the scanning electron microscope to understand the wear mechanisms. Originality/value The researchers verified that this specific coating condition increases the slurry wear resistance of the mentioned steel. There are many studies about slurry wear tests; however, there is no study in the literature about the quartz sand (SiO2) assisted slurry-erosive wear of AlSi10Mg alloy produced with AM by using SLM technology. This study is needed to fill this gap in the literature and to examine the erosive wear capability of this current material in different environments. The novelty of the study is the use of SiO2 quartz sands assisted by oxide ceramics in different concentrations for the slurry erosion test setup and the investigations on erosive wear resistance of AlSi10Mg alloy manufactured by AM.

scholarly journals The distribution of Cd and Cu in sediments covered with algal mat

2013 ◽  
Vol 9 (3) ◽  
pp. 243-250
Keyword(s):  
Organic Compounds ◽  
Sediment Cores ◽  
Seasonal Fluctuation ◽  
Bcr Sequential Extraction ◽  
Algal Mats ◽  
Fe Oxides ◽  
Coastal Marine ◽  
Sequential Extraction Method ◽  
Seasonal Basis ◽  
Algal Mat

In coastal marine environments, with shallow, warm and calm waters, it is sometimes possible to observe the presence of organosedimentary structures that are commonly flat and laminar in shape. These structures are called algal mats or recent stromatolites due to their remarkable similarities to fossil stromatolites. The aim of this work was the study of the distribution of the various forms of Cu and Cd in the main layers of coastal algal mats in a closed bay at Anavissos, on the coast of Saronikos Gulf. Small sediment cores were collected from one point inside the cove on a seasonal basis and the trace metals extracted according to the BCR sequential extraction method. The main results of the study were: Most of the labile Cd was associated with small inorganic grains or lime particles. The contribution of the fraction associated with Mn and Fe oxides, was similar to that adsorbed to organic compounds and sulfides. The high contribution of the labile Cd to the total element (over 85%) was a strong indication of anthropogenic origin. On the other hand, most of the Cu in the sediment was associated with the crystal lattice (74%). Cu showed increased seasonal fluctuation; most of its labile forms were associated with organic compounds and sulfides whereas the less abundant form was that associated with Mn and Fe oxides. On the whole, the sediments were slightly enriched in Cd, while the concentrations of Cu were normal for the region.

Sign in / Sign up

Export Citation Format

Share Document