Combined Proppant Placement and Early Production Modeling Achieve Increased Fracture Performance in Ecuador's Oriente Basin

2021 ◽  
Author(s):  
Maxim Chertov ◽  
Franck Ivan Salazar Suarez ◽  
Mikhail Kaznacheev ◽  
Ludmila Belyakova

Abstract In the paper, we document one iteration of the continuous improvement of well performance undertaken in the Oriente Basin in Ecuador. In the past, it had been observed that well economics was sometimes degraded by the issues related to proppant flowback from hydraulic fractures. Proppant flowback resulted in extra costs from well cleanouts, pump replacement, and damage to fracture conductivity. After evaluation of proppant flowback cases using the combined modeling workflow that simulates fracture growth, proppant placement, and early production of solids and fluids, it had been proposed to modify fracture designs and well startup strategy. In this paper, we review the first results of implementation of these modifications in the field and evaluate the significance of improvements.

1998 ◽  
Vol 11 (1) ◽  
pp. 360-360
Author(s):  
T. Gautschy ◽  
H.W. Duerbeck ◽  
A.M. Van Genderen ◽  
S. Benetti

The peculiar outburst of the star baptized Sakurai’s Object (SO) is a conceivable example of a late He shell flash in a post-AGB object. The new source of nuclear energy forces such objects toward high luminosities and eventually low effective temperatures; they cross the HR diagram in a comparable fashion as FG Sge did in the past - i.e., they move noticeably on the HR diagram on human timescales. From monitoring campaigns of SO during the last year, first estimates of its cooling rate were derived and in particular cyclic light variability was established. We present first results from attempts to model stellar envelopes appropriate for SO. As we hypothesize the light variability to be attributable to stellar pulsations, we aim at constraining the basic stellar parameters based on stability analyses of our envelope models. Radial, nonadiabatic stability computations provided predictions of the modal content which should be observable as SO evolves. The particular components in such mode spectra of SO as they are to appear in the coming years should indeed help to constrain basic stellar parameters such as mass and luminosity.


1899 ◽  
Vol 45 (191) ◽  
pp. 713-724
Author(s):  
F. Ashby Elkins ◽  
Jas. Middlemass

We think it will be generally acknowledged that the problem which the treatment of noisy, destructive, and dirty patients sets to their medical officers is greatest as regards their management at night. It is then undoubtedly that noise, destructiveness, and dirty habits have the greatest chance of getting free play, and it is then that the efforts for reformation have to be greatest. If these efforts are successful considerably more than half the problem will have been solved. It is to this part of the question, viz. the supervision of such patients during the night, that we desire in this paper to direct attention. At the outset it may be stated that our proposals are not theoretical. They are the result of practical experience gained during the past four years in the Sunderland Asylum. The special arrangements we propose to describe were instituted by one of us at the opening of the institution four years ago. At first a few cases were dealt with tentatively, but, as the first results were so encouraging, the number of cases was gradually increased, until all the patients who were restless, noisy, destructive, or of dirty habits came without exception to be dealt with. The asylum, situated at Ryhope, is a small one, containing only 350 beds, and on this account, as well as because it was new, it was conveniently suited for such an experiment. It may be well before going further to describe the arrangements now in existence there. There are 175 beds for each sex, made up as follows:—45 single rooms, one fully padded, and 2 half-padded; 2 small dormitories of 7 each, 2 of 13 each, 2 of 19 each, and 2 of 26 each. In the last two there is a night attendant, and one also in one of the dormitories for 19, which is the hospital ward. There is, in addition, a head night attendant who visits the patients in these dormitories and also all the remaining patients every hour, or oftener when necessary. There are thus 4 of a night staff for 175 patients. Though this is probably a large proportion compared to most public asylums, it is not claimed as a new departure in asylum management, as we are aware that in a number of asylums the advantage of having a large night staff is fully realised and acted on. The essential feature of the arrangements at Ryhope, to which we wish to direct attention, is the selection of cases placed in dormitories under constant supervision. Of course, all epileptics and suicidal patients are placed there. But, in addition, all recent cases of whatever kind, all dirty and destructive cases, and those who sleep badly and are in consequence inclined to chatter or be noisy, are also placed under constant supervision. Looked at from the other side, all single rooms and dormitories not under constant supervision are reserved for quiet and well-behaved patients who do not require any special attention during the night. This plan has been found to work exceedingly well, and since it was organised we have never had occasion to think of adopting any other. Another testimony to its effectiveness is that those of the staff who have the actual supervision of the patients and have had experience in other asylums are unanimous in their opinion that the arrangement is a very decided improvement. This opinion, let it be observed, is not based on the ground that now their duties are lighter than they were, because, as a matter of fact, they are more onerous.


2021 ◽  
Author(s):  
Kseniia Golubenko ◽  
Eugene Rozanov ◽  
Genady Kovaltsov ◽  
Ari-Pekka Leppänen ◽  
Ilya Usoskin

<p>We present the first results of modelling of the short-living cosmogenic isotope <sup>7</sup>Be production, deposition, and transport using the chemistry-climate model SOCOLv<sub>3.0</sub> aimed to study solar-terrestrial interactions and climate changes. We implemented an interactive deposition scheme,  based on gas tracers with and without nudging to the known meteorological fields. Production of <sup>7</sup>Be was modelled using the 3D time-dependent Cosmic Ray induced Atmospheric Cascade (CRAC) model. The simulations were compared with the real concentrations (activity) and depositions measurements of <sup>7</sup>Be in the air and water at Finnish stations. We have successfully reproduced and estimated the variability of the cosmogenic isotope <sup>7</sup>Be produced by the galactic cosmic rays (GCR) on time scales longer than about a month, for the period of 2002–2008. The agreement between the modelled and measured data is very good (within 12%) providing a solid validation for the ability of the SOCOL CCM to reliably model production, transport, and deposition of cosmogenic isotopes, which is needed for precise studies of cosmic-ray variability in the past. </p>


2021 ◽  
Author(s):  
Dimitry Chuprakov ◽  
Ludmila Belyakova ◽  
Ivan Glaznev ◽  
Aleksandra Peshcherenko

Abstract We developed a high-resolution fracture productivity calculator to enable fast and accurate evaluation of hydraulic fractures modeled using a fine-scale 2D simulation of material placement. Using an example of channel fracturing treatments, we show how the productivity index, effective fracture conductivity, and skin factor are sensitive to variations in pumping schedule design and pulsing strategy. We perform fracturing simulations using an advanced high-resolution multiphysics model that includes coupled 2D hydrodynamics with geomechanics (pseudo-3D, or P3D, model), 2D transport of materials with tracking temperature exposure history, in-situ kinetics, and a hindered settling model, which includes the effect of fibers. For all simulated fracturing treatments, we accurately solve a problem of 3D planar fracture closure on heterogenous spatial distribution of solids, estimate 2D profiles of fracture width and stresses applied to proppants, and, as a result, obtain the complex and heterogenous shape of fracture conductivity with highly conductive cells owing to the presence of channels. Then, we also evaluate reservoir fluid inflows from a reservoir to fracture walls and further along a fracture to limited-size wellbore perforations. Solution of a productivity problem at the finest scale allows us to accurately evaluate key productivity characteristics: productivity index, dimensional and dimensionless effective conductivity, skin factor, and folds of increase, as well as the total production rate at any day and for any pressure drawdown in a well during well production life. We develop a workflow to understand how productivity of a fracture depends on variation of the pumping schedule and facilitate taking appropriate decisions about the best job design. The presented workflow gives insight into how new computationally efficient methods can enable fast, convenient, and accurate evaluation of the material placement design for maximum production with cost-saving channel fracturing technology.


2021 ◽  
Author(s):  
Julie Letertre-Danczak ◽  
Angela Benedetti ◽  
Drasko Vasiljevic ◽  
Alain Dabas ◽  
Thomas Flament ◽  
...  

<p>Since several years, the number of aerosol data coming from lidar has grown and improved in quality. These new datasets are providing a valuable information on the vertical distribution of aerosols which is missing in the AOD (Aerosol Optical Depth), which has been used so far in aerosols analysis. The launch of AEOLUS in 2018 has increased the interest in the assimilation of the aerosol lidar information. In parallel, the ground-based network EARLINET (European Aerosol Research LIdar NETwork) has grown to cover the Europe with good quality data. Assimilation of these data in the ECMWF/CAMS (European Centre for Medium-range Weather Forecasts / Copernicus Atmosphere Monitoring Service) system is expected to provide improvements in the aerosol analyses and forecasts.<br><br>Three preliminary studies have been done in the past four years using AEOLUS data (A3S-ESA funded) and EARLINET data (ACTRIS-2 and EUNADIC-AV, EU-funded). These studies have allowed the full development of the tangent linear and adjoint code for lidar backscatter in the ECMWF's 4D-VAR system. These developments are now in the operational model version in research mode. The first results are promising and open the path to more intake of aerosol lidar data for assimilation purposes. The future launch of EARTHCARE (Earth-Cloud Aerosol and Radiation Explorer) and later ACCP (Aerosol Cloud, Convention and Precipitation) might even upgrade the use of aerosol lidar data in COMPO-IFS (Composition-Integrated Forecast system).<br><br>The most recent results using AEOLUS data (for October 2019 and April 2020) and using EARLINET data (October 2020) will be shown in this presentation. The output will be compared to the CAMS operational aerosol forecast as well as to independent data from AERONET (AErosol Robotic NETwork).</p>


2021 ◽  
Author(s):  
Behjat Haghshenas ◽  
Farhad Qanbari

Abstract Recovery factor for multi-fractured horizontal wells (MFHWs) at development spacing in tight reservoirs is closely related to the effective horizontal and vertical extents of the hydraulic fractures. Direct measurement of pressure depletion away from the existing producers can be used to estimate the extent of the hydraulic fractures. Monitoring wells equipped with downhole gauges, DFITs from multiple new wells close to an existing (parent) well, and calculation of formation pressure from drilling data are among the methods used for pressure depletion mapping. This study focuses on acquisition of pressure depletion data using multi-well diagnostic fracture injection tests (DFITs), analysis of the results using reservoir simulation, and integration of the results with production data analysis of the parent well using rate-transient analysis (RTA) and reservoir simulation. In this method, DFITs are run on all the new wells close to an existing (parent) well and the data is analyzed to estimate reservoir pressure at each DFIT location. A combination of the DFIT results provides a map of pressure depletion around the existing well, while production data analysis of the parent well provides fracture conductivity and surface area and formation permeability. Furthermore, reservoir simulation is tuned such that it can also match the pressure depletion map by adjusting the system permeability and fracture geometry of the parent well. The workflow of this study was applied to two field case from Montney formation in Western Canadian Sedimentary Basin. In Field Case 1, DFIT results from nine new wells were used to map the pressure depletion away from the toe fracture of a parent well (four wells toeing toward the parent well and five wells in the same direction as the parent). RTA and reservoir simulation are used to analyze the production data of the parent well qualitatively and quantitatively. The reservoir model is then used to match the pressure depletion map and the production data of the parent well and the outputs of the model includes hydraulic fracture half-lengths on both sides of the parent well, formation permeability, fracture surface area and fracture conductivity. In Field Case 2, the production data from an existing well and DFIT result from a new well toeing toward the existing wells were incorporated into a reservoir simulation model. The model outputs include system permeability and fracture surface area. It is recommended to try the method for more cases in a specific reservoir area to get a statistical understanding of the system permeability and fracture geometry for different completion designs. This study provides a practical and cost-effective approach for pressure depletion mapping using multi-well DFITs and the analysis of the resulting data using reservoir simulation and RTA. The study also encourages the practitioners to take every opportunity to run DFITs and gather pressure data from as many well as possible with focus on child wells.


SPE Journal ◽  
2021 ◽  
pp. 1-17
Author(s):  
Peidong Zhao ◽  
K. E. Gray

Summary Stimulated reservoir volume (SRV) is a prime factor controlling well performance in unconventional shale plays. In general, SRV describes the extent of connected conductive fracture networks within the formation. Being a pre-existing weak interface, natural fractures (NFs) are the preferred failure paths. Therefore, the interaction of hydraulic fractures (HFs) and NFs is fundamental to fracture growth in a formation. Field observations of induced fracture systems have suggested complex failure zones occurring in the vicinity of HFs, which makes characterizing the SRV a significant challenge. Thus, this work uses a broad range of subsurface conditions to investigate the near-tip processes and to rank their influences on HF-NF interaction. In this study, a 2D analytical workflow is presented that delineates the potential slip zone (PSZ) induced by a HF. The explicit description of failure modes in the near-tip region explains possible mechanisms of fracture complexity observed in the field. The parametric analysis shows varying influences of HF-NF relative angle, stress state, net pressure, frictional coefficient, and HF length to the NF slip. This work analytically proves that an NF at a 30 ± 5° relative angle to an HF has the highest potential to be reactivated, which dominantly depends on the frictional coefficient of the interface. The spatial extension of the PSZ normal to the HF converges as the fracture propagates away and exhibits asymmetry depending on the relative angle. Then a machine-learning (ML) model [random forest (RF) regression] is built to replicate the physics-based model and statistically investigate parametric influences on NF slips. The ML model finds statistical significance of the predicting features in the order of relative angle between HF and NF, fracture gradient, frictional coefficient of the NF, overpressure index, stress differential, formation depth, and net pressure. The ML result is compared with sensitivity analysis and provides a new perspective on HF-NF interaction using statistical measures. The importance of formation depth on HF-NF interaction is stressed in both the physics-based and data-driven models, thus providing insight for field development of stacked resource plays. The proposed concept of PSZ can be used to measure and compare the intensity of HF-NF interactions at various geological settings.


2021 ◽  
Author(s):  
Ahmed Farid Ibrahim ◽  
Mazher Ibrahim ◽  
Matt Sinkey ◽  
Thomas Johnston ◽  
Wes Johnson

Abstract Multistage hydraulic fracturing is the common stimulation technique for shale formations. The treatment design, formation in-situ stress, and reservoir heterogeneity govern the fracture network propagation. Different techniques have been used to evaluate the fracture geometry and the completion efficiency including Chemical Tracers, Microseismic, Fiber Optics, and Production Logs. Most of these methods are post-fracture as well as time and cost intensive processes. The current study presents the use of fall-off data during and after stage fracturing to characterize producing surface area, permeability, and fracture conductivity. Shut-in data (15-30 minutes) was collected after each stage was completed. The fall-off data was processed first to remove the noise and water hammer effects. Log-Log derivative diagnostic plots were used to define the flow regime and the data were then matched with an analytical model to calculate producing surface area, permeability, and fracture conductivity. Diagnostic plots showed a unique signature of flow regimes. A long period of a spherical flow regime with negative half-slope was observed as an indication for limited entry flow either vertically or horizontally. A positive half-slope derivative represents a linear flow regime in an infinitely conductive tensile fracture. The quarter-slope derivative was observed in a bilinear flow regime that represents a finite conductivity fracture system. An extended radial flow regime was observed with zero slope derivative which represents a highly shear fractured network around the wellbore. For a long fall-off period, formation recharge may appear with a slope between unit and 1.5 slopes derivative, especially in over-pressured dry gas reservoirs. Analyzing fall-off data after stages are completed provides a free and real-time investigation method to estimate the fracture geometry and a measure of completion efficiency. Knowing the stage properties allows the reservoir engineer to build a simulation model to forecast the well performance and improve the well spacing.


2021 ◽  
Author(s):  
Meng Wang ◽  
Mingguang Che ◽  
Bo Zeng ◽  
Yi Song ◽  
Yun Jiang ◽  
...  

Abstract Application of diversion agents in temporarily plugging fracturing of horizontal wells of shale has becoming more and more popular. Nevertheless, the studies on determining the diverter dosage are below adequacy. A novel approach based on laboratory experiments, logging data, rock mechanics tests and fracture simulation was proposed to optimizing the dosage of diversion agents. The optimization model is based on the classic Darcy Law. A pair of 3D-printed rock plates with rugged faces was combined to simulate the coarse hydraulic fractures with the width of 2.0 ~ 7.0 mm. The mixture of the diversion agents and slickwater was dynamically injected to simulate the fracture in Temco fracture conductivity system to mimic the practical treatment to temporarily plugging the fracture. The permeability of the temporary plugging zone in the 3D-printed fractures was measured in order to optimize the dosage of the selected diversion agents. The value of Pnet (also the value of ΔP in Darcy Formula) required for creation of new branched fractures was determined using the Warpinski-Teufel Failure Rules. The hydraulic fractures of target stages were simulated to obtain the widths and heights. The experimental results proved that the selected suite of the diversion agents can temporarily plug the 3D-printed fractures of 2.0 ~ 7.0 mm with blocking pressure up to 15 MPa. The measured permeability of the resulting plugging zones was 0.724 ~ 0.933 D (averaging 0.837 D). The value of Pnet required for creation of branched fractures in shale of WY area (main shale gas payzone of China) was determined as 0.4 ~ 15.6 MPa (averaging 7.9 MPa) which means the natural fractures and/or weak planes with approaching angle less than 70° could be opened to increase the SRV. The typical dosage of the diversion agents used for one stage of the horizontal wells (averaging TVD 3600 m) was calculated as 232 ~ 310 kg. The optimization method was applied to the design job of temporarily plugging fracturing of two shale gas wells. The observed surface pressure rise after injection of diversion agents was 0.6 ~ 11.7 MPa (averaging 4.7 MPa) and the monitored microseismic events of the test stages were 37% more than those of the offset stages.


2021 ◽  
Author(s):  
Aymen Alhemdi ◽  
Ming Gu

Abstract Slickwater-sand fracturing design is widely employed in Marcellus shale. The slickwater- sand creates long skinny fractures and maximizes the stimulated reservoir volume (SRV). However, due to the fast settling of sand in the water, lots of upper and deeper areas are not sufficiently propped. Reducing sand size can lead to insufficient fracture conductivity. This study proposes to use three candidate ultra-lightweight proppants ULWPs to enhance the fractured well performance in unconventional reservoirs. In step 1, the current sand pumping design is input into an in-house P3D fracture propagation simulator to estimate the fracture geometry and proppant concentrations. Next, the distribution of proppant concentration converts to conductivity and then to fracture permeability. In the third step, the fracture permeability from the second step is input into a reservoir simulator to predict the cumulative production for history matching and calibration. In step 4, the three ULWPs are used to replace the sand in the frac simulator to get new frac geometry and conductivity distribution and then import them in reservoir model for production evaluation. Before this study, the three ULWPs have already been tested in the lab to obtain their long-term conductivities under in-situ stress conditions. The conductivity distribution and production performance are analyzed and investigated. The induced fracture size and location of the produced layer for the current target well play a fundamental effect on ultra-light proppant productivity. The average conductivity of ULWPs with mesh 40/70 is larger and symmetric along the fracture except for a few places. However, ULWPs with mesh 100 generates low average conductivity and create a peak conductivity in limited areas. The ULW-3 tends to have less cumulative production compared with the other ULWPs. For this Marcellus Shale study, the advantages of ultra-lightweight proppant are restricted and reduced because the upward fracture height growth is enormous. And with the presence of the hydrocarbon layer is at the bottom of the fracture, making a large proportion of ULWPs occupies areas that are not productive places. The current study provides a guidance for operators in Marcellus Shale to determine (1) If the ULWP can benefit the current shale well treated by sand, (2) what type of ULWP should be used, and (3) given a certain type of ULWP, what is the optimum pumping schedule and staging/perforating design to maximize the well productivity. The similar workflow can be expanded to evaluate the economic potential of different ULWPs in any other unconventional field.


Sign in / Sign up

Export Citation Format

Share Document