Optimized Hydraulic Fracturing Improves Oil Production in the N'Dola Field, Offshore Angola

1998 ◽  
Author(s):  
John M. Bagzis ◽  
C. Dean Wehunt ◽  
Edward B. Neubauer ◽  
Raymond P. Jansson ◽  
Richard Tjoonk ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Production

Increasing the Productivity of Horizontal Wells Through Multistage Hydraulic Fracturing Using a Working Fluid Based on a New Biopolymer System

2021 ◽  
Author(s):  
Nikolay Mikhaylovich Migunov ◽  
Aleksey Dmitrievich Alekseev ◽  
Dinar Farvarovich Bukharov ◽  
Vadim Alexeevich Kuznetsov ◽  
Aleksandr Yuryevich Milkov ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Russian Federation ◽  
Oil Production ◽  
Horizontal Wells ◽  
Working Fluid ◽  
High Tech ◽  
Executive Order ◽  
Bazhenov Formation ◽  
Multistage Hydraulic Fracturing ◽  
The Russian Federation

Abstract According to the US Energy Agency (EIA), Russia is the world leader in terms of the volume of technically recoverable "tight oil" resources (U.S. Department of Energy, 2013). To convert them into commercial production, it is necessary to create cost-effective development technologies. For this purpose, a strategy has been adopted, which is implemented at the state level and one of the key elements of which is the development of the high-tech service market. In 2017, the Minister of Energy of the Russian Federation, in accordance with a government executive order (Government Executive Order of the Russian Federation, 2014), awarded the Gazprom Neft project on the creation of a complex of domestic technologies and high-tech equipment for developing the Bazhenov formation with the national status. It is implemented in several directions and covers a wide range of technologies required for the horizontal wells drilling and stimulating flows from them using multi-stage hydraulic fracturing (MS HF) methods. Within the framework of the technological experiment implemented at the Palyanovskaya area at the Krasnoleninskoye field by the Industrial Integration Center "Gazpromneft - Technological Partnerships" (a subsidiary of Gazprom Neft), from 2015 to 2020, 29 high-tech wells with different lengths of horizontal wellbore were constructed, and multistage hydraulic fracturing operations were performed with various designs. Upon results of 2020, it became possible to increase annual oil production from the Bazhenov formation by 78 % in comparison with up to 100,000 tons in 2019. The advancing of development technologies allowed the enterprise to decrease for more than twice the cost of the Bazhenov oil production from 30 thousand rubles per ton (69$/bbl) at the start of the project in 2015 to 13 thousand rubles (24$/bbl) in 2020. A significant contribution to the increase in production in 2020 was made by horizontal wells, where MS HF operations were carried out using an experimental process fluid, which is based on the modified Si Bioxan biopolymer. This article is devoted to the background of this experiment and the analysis of its results.

Experimental Investigation on Enhanced-Oil-Recovery Mechanisms of Using Supercritical Carbon Dioxide as Prefracturing Energized Fluid in Tight Oil Reservoir

SPE Journal ◽  
2021 ◽  
pp. 1-16
Author(s):  
Lei Li ◽  
Zheng Chen ◽  
Yu-Liang Su ◽  
Li-Yao Fan ◽  
Mei-Rong Tang ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Water Resources ◽  
Supercritical Carbon Dioxide ◽  
Hydraulic Fracturing ◽  
Clay Minerals ◽  
Oil Production ◽  
Tight Oil ◽  
Injection Mode ◽  
Oil Development ◽  
Live Oil

Summary Fracturing is the necessary means of tight oil development, and the most common fracturing fluid is slickwater. However, the Loess Plateau of the Ordos Basin in China is seriously short of water resources. Therefore, the tight oil development in this area by hydraulic fracturing is extremely costly and environmentally unfriendly. In this paper, a new method using supercritical carbon dioxide (CO2) (ScCO2) as the prefracturing energized fluid is applied in hydraulic fracturing. This method can give full play to the dual advantages of ScCO2 characteristics and mixed-water fracturing technology while saving water resources at the same time. On the other hand, this method can reduce reservoir damage, change rock microstructure, and significantly increase oil production, which is a development method with broad application potential. In this work, the main mechanism, the system-energy enhancement, and flowback efficiency of ScCO2 as the prefracturing energized fluid were investigated. First, the microscopic mechanism of ScCO2 was studied, and the effects of ScCO2 on pores and rock minerals were analyzed by nuclear-magnetic-resonance (NMR) test, X-ray-diffraction (XRD) analysis, and scanning-electron-microscope (SEM) experiments. Second, the high-pressurechamber-reaction experiment was conducted to study the interaction mechanism between ScCO2 and live oil under formation conditions, and quantitively describe the change of high-pressure physical properties of live oil after ScCO2 injection. Then, the numerical-simulation method was applied to analyze the distribution and existence state of ScCO2, as well as the changes of live-oil density, viscosity, and composition in different stages during the full-cycle fracturing process. Finally, four injection modes of ScCO2-injection core-laboratory experiments were designed to compare the performance of ScCO2 and slickwater in terms of energy enhancement and flowback efficiency, then optimize the optimal CO2-injection mode and the optimal injection amount of CO2slug. The results show that ScCO2 can dissolve calcite and clay minerals (illite and chlorite) to generate pores with sizes in the range of 0.1 to 10 µm, which is the main reason for the porosity and permeability increases. Besides, the generated secondary clay minerals and dispersion of previously cemented rock particles will block the pores. ScCO2 injection increases the saturation pressure, expansion coefficient, volume coefficient, density, and compressibility of crude oil, which are the main mechanisms of energy increase and oil-production enhancement. After analyzing the four different injection-mode tests, the optimal one is to first inject CO2 and then inject slickwater. The CO2 slug has the optimal value, which is 0.5 pore volume (PV) in this paper. In this paper, the main mechanisms of using ScCO2 as the prefracturing energized fluid are illuminated. Experimental studies have proved the pressure increase, production enhancement, and flowback potential of CO2 prefracturing. The application of this method is of great significance to the protection of water resources and the improvement of the fracturing effect.

scholarly journals Potential Use of Water Associated with Conventional Oil Production and Sea Water as Base Fluids for Hydraulic Fracturing Operations: Effect of Water Chemistry on Crosslinking and Breaking Behaviors of Guar Gum-Based Fracturing Fluid Formulations

2016 ◽  
Vol 6 (1) ◽  
pp. 31 ◽  
Author(s):  
Dayanand Saini ◽  
Timea Mezei
Keyword(s):  
Los Angeles ◽  
Hydraulic Fracturing ◽  
Water Chemistry ◽  
Fresh Water ◽  
Oil And Gas ◽  
Guar Gum ◽  
Sea Water ◽  
Oil Production ◽  
Fracturing Fluid ◽  
Conventional Oil

 Even though water consumption per hydraulic fracturing (or fracturing) job is relatively low; nearly all of the fresh water used for fracturing in California is in the regions of high water stress such as San Jouquin and Los Angeles Basins. However, water availability should not be a concern as huge volumes of water are being produced along with oil and gas from conventional formations (i.e. associated water) in the Kern County of California, a region where most of the fracturing activities take place. This associated water can potentially be used for preparing fracturing fluids in stimulating the unconventional formations. The present study reports on the relevant investigation done in this area of interest.The results suggest that associated water chemistry has limited effect on the viscosity of cross-linked formulations. However, guar gum concentration was found to affect the breaking behaviors of cross-linked fracturing fluid formulations. The new type of commercially available biodegradable breaker was found to be effective in breaking the tested cross-linked formulations at elevated temperature which was as high as 85°C (185°F). Both crosslinking and breaking behaviors of fracturing fluid formulations evaluated in this study were found comparable to the behaviors of commonly used cross-linked formulation (guar gum + 2% potassium chloride). These results suggest that both the associated water (i.e. water resulting from regional conventional oil production activites) and sea water (offshore oil fields) could serve as alternative sources of base fluid for use in fracturing jobs without putting significant burden on precious regional fresh water resources.

scholarly journals Identifying chemicals of concern in hydraulic fracturing fluids used for oil production

2017 ◽  
Vol 220 ◽  
pp. 413-420 ◽  
Author(s):  
William T. Stringfellow ◽  
Mary Kay Camarillo ◽  
Jeremy K. Domen ◽  
Whitney L. Sandelin ◽  
Charuleka Varadharajan ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Production ◽  
Fracturing Fluids

The Study and Application of Massive Hydraulic Fracturing Technique in Y104-6 Well Glutenite Formation

2013 ◽  
Vol 734-737 ◽  
pp. 1498-1502
Author(s):  
Cong Lu ◽  
Jian Chun Guo ◽  
Ren Jiang Xue ◽  
Jian Wang
Keyword(s):  
Hydraulic Fracturing ◽  
Economic Benefit ◽  
Material Selection ◽  
Oil Production ◽  
Thick Section ◽  
Geological Characteristics ◽  
Recoverable Reserves ◽  
Reservoir Development

Aiming at the southern areas of Bohai glutenite reservoir natural capacity is low, without obvious interlayer, filter lost badly, cause conventional hydraulic facturing in short of effect on increasing production, the paper conducted the research and application of technology on Y104-6 well. According to the reservoir geological characteristics and well conditions, the paper studied on fracturing scale determination, the perforating section, and the optimization of fracturing material selection, and application. Completed the injection into well fluid amount 1491.9 m3, proppant 188 m3, displacement of pump 7.5 m3/min. After treatment, average fluid flowing production achieved 18.6 t/d, average daily oil production 6.8 t, stimulate effect and the economic benefit is remarkable. This well fracturing technology, make the successful application of the southern areas of Bohai glutenite reservoir a significant breakthrough, recoverable reserves get promoted for big thick section glutenite reservoir development and vertical fracturing of the organization and implementation has provided valuable experience.

scholarly journals The efficiency of gas injection into low-permeability multilayer hydrocarbon reservoirs

2021 ◽  
Vol 3 (10) ◽  
pp. 100-108
Author(s):  
Sudad H AL-Obaidi ◽  
Miel Hofmann ◽  
Falah H. Khalaf ◽  
Hiba H. Alwan
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Gas Injection ◽  
Oil Production ◽  
Recovery Factor ◽  
Low Permeability ◽  
Compositional Model ◽  
Multistage Hydraulic Fracturing ◽  
Low Permeability Reservoirs ◽  
Working Agent

The efficiency of gas injection for developing terrigenous deposits within a multilayer producing object is investigated in this article. According to the results of measurements of the 3D hydrodynamic compositional model, an assessment of the oil recovery factor was made. In the studied conditions, re-injection of the associated gas was found to be the most technologically efficient working agent. The factors contributing to the inefficacy of traditional methods of stimulating oil production such as multistage hydraulic fracturing when used to develop low-permeability reservoirs have been analyzed. The factors contributing to the inefficiency of traditional oil-production stimulation methods, such as multistage hydraulic fracturing, have been analysed when they are applied to low-permeability reservoirs. The use of a gas of various compositions is found to be more effective as a working agent for reservoirs with permeability less than 0.005 µm2. Ultimately, the selection of an agent for injection into the reservoir should be driven by the criteria that allow assessing the applicability of the method under specific geological and physical conditions. In multilayer production objects, gas injection efficiency is influenced by a number of factors, in addition to displacement, including the ratio of gas volumes, the degree to which pressure is maintained in each reservoir, as well as how the well is operated. With the increase in production rate from 60 to 90 m3 / day during the re-injection of produced hydrocarbon gas, this study found that the oil recovery factor increased from 0.190 to 0.229. The further increase in flow rate to 150 m3 / day, however, led to a faster gas breakthrough, a decrease in the amount of oil produced, and a decrease in the oil recovery factor to 0.19 Based on the results of the research, methods for stimulating the formation of low-permeability reservoirs were ranked based on their efficacy.

Considerations for Using a Hydraulic Fracturing Fluid for Breaking Crude Oil Emulsion from Reservoir

2018 ◽  
Vol 69 (6) ◽  
pp. 1498-1500
Author(s):  
Lacramioara Olarasu ◽  
Maria Stoicescu ◽  
Ion Malureanu ◽  
Ion Onutu
Keyword(s):  
Hydraulic Fracturing ◽  
Crude Oil ◽  
Oil Production ◽  
Oil Field ◽  
Reservoir Rock ◽  
Oil Well ◽  
Strong Impact ◽  
Fracturing Fluid ◽  
Oil Emulsion ◽  
Oil Emulsions

In the oil industry, crude oil emulsions appear very frequently in almost all activities, starting with drilling and continuing with completion, production, transportation and processing. They are usually formed naturally or during oil production and their presence can have a strong impact on oil production and facilities. In this paper we addressed the problem of oil emulsions present in a reservoir with unfavorable flow properties. It is known that the presence of emulsions in a reservoir can influence both flow capacity and the quality of its crude oil, especially when they are associated with porous medium�s low values of permeability. Considering this, we have introduced a new procedure for selecting a special fluid of fracture. This fluid has two main roles: to create new flow paths from the reservoir rock to wells; to produce emulsion breaking of emulsified oil from pore of rocks. Best fracturing fluid performance was determined by laboratory tests. Selected fluid was then used to stimulate an oil well located on an oil field from Romania. In the final section of this paper,we are presenting a short analysis of the efficiency of the operation of hydraulic fracturing stimulation probe associated with the crude oil emulsion breaking process.

Development and Prospects of Fracturing Equipment in China and Foreign Countries

2013 ◽  
Vol 850-851 ◽  
pp. 237-240
Author(s):  
Yuan Wang ◽  
Quan Jie Gao ◽  
Fei Long Zheng
Keyword(s):  
Hydraulic Fracturing ◽  
Production Process ◽  
Shale Gas ◽  
High Power ◽  
Oil Production ◽  
Paper Briefly ◽  
Manufacturing Enterprises ◽  
Foreign Countries ◽  
The World ◽  
Stimulation Method

Hydraulic fracturing is a stimulation method with broad prospects, and it has been widely used in oil production, shale gas development all over the world. This paper briefly introduced the production process of fracturing, summarized the main fracturing equipments of manufacturing enterprises in Western counties, and compared a part of fracturing pumps. Then this work introduced some fracturing truck products from Chinese domestic fracturing equipment manufacturers. Finally, the author put forward her prospects about the development of fracturing equipment in the future: combination between manufacturing and production, developing high-power but easy-to-move and network controlled products.

Sign in / Sign up

Export Citation Format

Share Document