Evolution of Completion Techniques in the Lower Shaunavon Tight Oil Play in Southwestern Saskatchewan

2015 ◽  
Author(s):  
D. J. Schlosser ◽  
M.. Johe ◽  
T.. Humphreys ◽  
C.. Lundberg ◽  
J. L. McNichol
Keyword(s):  
Oil And Gas ◽  
New Technology ◽  
Oil And Gas Industry ◽  
Field Trials ◽  
Gas Industry ◽  
Point Energy ◽  
Horizontal Drilling ◽  
Oil Reserves ◽  
Coiled Tubing ◽  
Open Hole

Abstract The Oil and Gas industry has explored and developed the Lower Shaunavon formation through vertical drilling and completion technology. In 2006, previously uneconomic oil reserves in the Lower Shaunavon were unlocked through horizontal drilling and completions technologies. This success is similar to the developments seen in many other formations within the Williston Basin and Western Canadian Sedimentary Basin including Crescent Point Energy's Viewfield Bakken play in southeast Saskatchewan. In the Lower Shaunavon play, the horizontal multistage completion era began in 2006, with horizontal divisions of four to six completion stages per well that utilized ball-drop sleeves and open-hole packers. By 2010, the stage count capabilities of ball-drop systems had increased and liners with nine to 16 stages per well were being run. With an acquisition in 2009, Crescent Point Energy began operating in the Lower Shaunavon area. The acquisition was part of the company's strategy to acquire large oil-in-place resource plays. Recognizing the importance that technology brings to these plays, Crescent Point Energy has continuously developed and implemented new technology. In 2009, realizing the success of coiled tubing fractured cemented liners in the southeast Saskatchewan Viewfield Bakken play, Crescent Point Energy trialed their first cemented liners in the Lower Shaunavon formation. At the same time, technology progressed with advancements in completion strategies that were focused on fracture fluids, fracture stages, tool development, pump rates, hydraulic horsepower, environmental impact, water management, and production. In 2013, another step change in technology saw the implementation of coiled tubing activated fracture sleeves in cemented liner completions. Based on field trials and well results in Q4 2013, Crescent Point Energy committed to a full cemented liner program in the Lower Shaunavon. This paper presents the evolution of Crescent Point Energy's Lower Shaunavon resource play of southwest Saskatchewan. The benefits of current completion techniques are: reductions in water use, increased production, competitive well costs, and retained wellbore functionality for potential re-fracture and waterflooding programs.

New Well Intervention Means as an Answer to Offshore Minimalist Platform Concept: A Breakthrough from Mahakam, Indonesia

2021 ◽  
Author(s):  
Risal Rahman ◽  
Reyhan Hidayat ◽  
Pratika Siamsyah Kurniawati ◽  
Rantoe Marindha ◽  
Gerardus Putra Pancawisna ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Cost Optimization ◽  
Oil And Gas Industry ◽  
Project Planning ◽  
Gas Industry ◽  
Safety Issues ◽  
Coiled Tubing ◽  
Remote Operation ◽  
Innovation And Technology ◽  
Hazardous Zone

Abstract Nowadays oil and gas industry are encouraging the independents and majors to take a fresh look at the technology and concepts required to develop marginal shallow water fields using a minimal platform approach. Innovation on well intervention means (lighter, smaller and less footprint) that fit for Offshore Minimalist Platform (OMP) is needed, including optimizing time and cost during well intervention activities in OMP. To achieve the objectives, well intervention innovation and technology are the main focuses. Intervention activities commonly done on campaign basis with several units (slickline, wireline, coiled tubing, testing) shall be integrated in a safe manner. The approach of integration shall signify these points:Identifying potential jobs in OMP to be done by well intervention methodsIdentifying necessary well intervention means and methods to support the jobs (combo unit, micro coil, hazardous zone redefinition, remote operation)Creating project planning and schedulingPerforming site visit and risk assessmentImplementation and operational executionEvaluation of overall project execution result The following results were obtained after the integration performed:No major safety issues during operationExemplary method and risk assessment for well intervention activities which can be applied for next campaignsTrials on well intervention new units and method (combo unit, micro coil, hazardous zone redefinition, remote operation), were safely performed with some optimization100% success ratio60% on supply boat arrangement35% efficiency in N2 consumption for CT operation45% efficiency in diesel consumption20% - 40% efficiency in Rig Up Time28% less in Job Cost compared to conventional unit These innovations are proven as reliable method to answer OMP challenges with main advantages on footprint and cost optimization. Through this paper, we would like to share lucrative well intervention breakthrough and innovation in OMP with measurable milestones.

Wet Compression: Performance Test of a 3D Impeller and Validation of Predictive Model

2016 ◽  
Author(s):  
Veronica Ferrara ◽  
Lars E. Bakken ◽  
Stefano Falomi ◽  
Giuseppe Sassanelli ◽  
Matteo Bertoneri ◽  
...  
Keyword(s):  
Performance Test ◽  
Oil And Gas ◽  
Dynamic Pressure ◽  
New Technology ◽  
Mechanical Damage ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Compression Performance ◽  
Laboratory Setup ◽  
Wet Compression

In the last few years wet compression has received special attention from the oil and gas industry. Here, the development and implementation of new subsea solutions are important focus areas to increase production and recovery from existing fields. This new technology will contribute to exploitation of small and remote fields and access in very deep water. In this regard liquid tolerance represents a viable option to reduce the cost of a subsea compression station bringing considerable simplification to the subsea process itself. However, the industry may experience some drawbacks: the various levels of liquid presence may create operational risk for traditional compressors; the liquid may cause mechanical damage because of erosion and corrosion of the internal units and the compressor performance might be affected too. The experimental investigation conducted in the study considers dry and wet conditions in a laboratory setup to understand how the presence of liquid influences the stage performance. The test campaign has been carried out at the Norwegian University of Science and Technology, NTNU, in Trondheim, to assess the performance and operating range of a tridimensional impeller when processing a mixture of gas and liquid phases. Experimental results allowed validating the OEM internal prediction code for compressors’ performance in wet conditions. Finally, the effect of liquid on machine operability has been assessed through a left-limit investigation by means of dynamic pressure probes readings in order to evaluate the stall/surge behaviour for different values of liquid mass fraction.

Logic Sequence Prevents Launching Devices Downhole Out of Sequence

2014 ◽  
Author(s):  
Ricardo de Lepeleire ◽  
Nicolas Rogozinski ◽  
Hank Rogers ◽  
Daniel Ferrari
Keyword(s):  
Latin America ◽  
Oil And Gas ◽  
New Technology ◽  
Specific Area ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Logic Control ◽  
Drilling Operations ◽  
Common Operation ◽  
Increasing Demand

Within the oil and gas industry, significant costs are often incurred by the operating company during the well-construction phase of drilling operations. Specifically, the operators cost to drill a well can cost tens or hundreds of millions of USD. One specific area where significant changes in drilling operations have occurred is in the offshore environment, specifically operations from mobile offshore drilling units (MODUs). With the ever-increasing demand for oil and gas, operators globally have increased drilling budgets in an effort to meet forecasted demand. However, the increased budgets are often eroded or offset by increasing drilling costs. Therefore, operators are continually in search of new technology, processes, or procedures to help improve drilling operations and overall operational efficiencies. One Latin America operator identified a common operation as a possible area where operational cost could be easily reduced through the implementation of systems that allow the manipulation of valve manifolds remotely. Additionally, operating such valve manifolds remotely enhanced operational safety for personnel, which was an equally important consideration. This paper details the evaluation of existing equipment and procedures and a process used to develop a new remote-control system using a machine logic control (MLC) that has been designed, built, tested, and deployed successfully on MODUs operating in Latin America.

scholarly journals CFD STUDY OF SAND EROSION IN PIPELINE USING DIFFERENT PERCENTAGE OF ETHYLENE GLYCOL AND DEIONIZED WATER

2020 ◽  
Vol 9 (12) ◽  
pp. 111-125
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Skin Friction Coefficient ◽  
Solid Particles ◽  
Sand Particle ◽  
Pipe Bend ◽  
Gas Industry ◽  
Oil Reserves ◽  
Sand Erosion ◽  
Swirl Velocity

Sand productions are inclusive of various types of major key challenges for gas and oil productions as the sand managements are rapidly growing in becoming significant to manage wells of high rates. Since approximately 70% of gas as well oil reserves around the globe are sand formations Sand production is an unavoidable by-product in oil and gas industry as 70% gas and oil reserves of the world oil are sand formation. Transportation of the particles from the wellbore to the surface will cause the damage to the amenities and tools. Wells producing gas and oils can potentially fail because of the erosion of the major solid particles. It can be illustrated through an example like producing wells having considerable amount of production of sand might affect negatively over the fitting and components of the pipeline, well tubing as well as the equipment used for the production. Thus can cause highly priced potential ecofriendly damages, equipment loss and downtime production. The current study provides outcomes gathered through examining and analyzing various factors for determining the severities and amount of the erosion of sand over the pipe bend. To solve the phenomena of the flow of the fluid, this study has used CFD. To design the pipe’s elbow, CATIA-V5 is brought in use and meshing is done with the help of the ANSYS. Different cases will be studied here by varying the percentage of water and EG with respect to sand particle size 160m and 370m. Erosion rate, Skin friction Coefficient and Swirl velocity are the three major effects which will be studied further. Through the observation of the study, it can be said that material’s character and flow velocity are the predominant factors which might affect the rate of sand erosion within the pipelines. The observation is made over every factor and is also analyzed.

scholarly journals Experimental study of circular inlets effect on the performances of Gas-Liquid Cylindrical Cyclone separators (GLCC)

2020 ◽  
Vol 3 (SI1) ◽  
pp. First
Author(s):  
Ho Minh Kha ◽  
Nguyen Thanh Nam ◽  
Vo Tuyen ◽  
Nguyen Tan Ken
Keyword(s):  
Oil And Gas ◽  
New Technology ◽  
Oil And Gas Industry ◽  
Critical Element ◽  
Gas Industry ◽  
Cylindrical Cyclone ◽  
Inlet Geometry ◽  
Petroleum Companies ◽  
Two Phases ◽  
The One

The gas-liquid cylindrical cyclone (GLCC) separators is a fairly new technology for the oil and gas industry. The current GLCC separator, a potential alternative for the conventional one, was studied, developed, and patented by Chevron company and Tulsa University (USA). It is used for replacing the traditional separators that have been used over the last 100 years. In addition, it is significantly attracted to petroleum companies in recent years because of the effect of the oil world price. However, the behavior of phases in the instrument is very rapid, complex, and unsteady, which may cause the difficulty of enhancing the performance of the separation phases. The multiple recent research shows that the inlet geometry is probably the most critical element that influences directly to the performance of separation of phases. Though, so far, most of the studies of GLCC separator were limited with the one inlet model. The main target of the current study is to deeply understand the effect of different geometrical configurations of the circular inlet on performances of GLCC by the experimental method for two phases flow (gas-liquid). Two different inlet configurations are constructed, namely: One circular inlet and two symmetric circular inlets. As a result, we propose the use of two symmetric circular inlets to enhance separator efficiency because of their effects.

New Technology Allows for Hands-Off Intervention During Cementing Operations Increasing Safety and Operational Efficiency

2021 ◽  
Author(s):  
Michael Ramon ◽  
Tony Wooley ◽  
Kyle Martens ◽  
Amy Farrar ◽  
Seth Fadaol
Keyword(s):  
High Risk ◽  
Oil And Gas ◽  
Service Providers ◽  
New Technology ◽  
Oil And Gas Industry ◽  
Field Studies ◽  
Gas Industry ◽  
Cement Line ◽  
Technological Advances ◽  
Hands On

Abstract The culture of safety within the oil and gas industry has undergone an evolution since the advent of significant E&P operations in the late 1800s. The initial focus on safety was to protect property, not people. This mentality has shifted over time to include a greater focus on the safety of personnel, in parallel with technology developments that have pushed the limits of operators’ and service providers’ abilities to drill and complete more complicated wells. The safety efforts introduced to date have yielded results in every major HS&E category; however, falls and dropped objects continue to be areas in need of improvement. During cementing rig up and operations there are still many manual activities that require working at heights in the derrick. New technological advances have allowed the industry to reduce the number of hands-on activities on the rig and operators have moved to eliminate these activities by automating operations. Man lifting operations are recognized as a high-risk activity and, as such, many rigs require special permitting. During cementing operations, not only are personnel lifted into hazardous positions, but they are usually equipped with potential dropped objects. Some of these objects, if dropped, reach an impact force that could seriously injure or, in worst cases, result in a fatality. During these operations, personnel are also hoisted along with a heavy cement line in very close proximity. This introduces other dangers such as tangling, pinch points, and blunt force trauma. These risks are heavily increased when working in adverse conditions, such as high winds or rough seas. By utilizing a wireless cement line make up device, along with wireless features on a cement head to release the darts/plugs/balls and operate the isolation valves, an operator can eliminate the need for hands-on intervention. This paper will discuss current cement head technologies available to the operator that allow them to improve safety and efficiencies in operational rig time. Three field studies will be presented that detail running cement jobs with all functions related to the wireless attributes of the cement head. The field studies will present the operational efficiencies achieved by utilizing the wireless features compared to the standard manual method. Before the recent introduction of a wireless cementing line make-up device, a wireless cement head still required hands-on intervention to rig up the tools, putting people in high-risk situations.

TRENDS IN THE DEVELOPMENT OF THE OIL AND GAS MARKET AND THE MAIN MEASURES OF STATE SUPPORT AIMED AT THE IMPLEMENTATION OF ARCTIC OIL AND GAS PROJECTS

2021 ◽  
Vol 5 (11) ◽  
pp. 31-38
Author(s):  
Igor V. Selin ◽  
◽  
Mikhail V. Ulchenko ◽  
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Production ◽  
State Support ◽  
Gas Industry ◽  
Oil Companies ◽  
Oil Reserves ◽  
Exploration Drilling ◽  
Gas Market ◽  
High Level

This article is devoted to the study of the main trends in the development of the oil and gas market, as well as the transfer of state support aimed at the implementation of Arctic oil and gas projects. The analysis showed that 2020 turned out to be extremely difficult for the oil and gas industry as a whole. The volumes of oil and natural gas production and consumption decreased, and due to a reduction in revenue, large domestic companies began to save on exploration drilling. Given the high level of «depletion» of oil reserves in traditional fields, with an increase in demand, in the short term, domestic oil companies will not be able to quickly increase production volumes and take advantage of favorable market conditions.

Cost Element Modelling, Prediction and Optimization in a Dual-Completion Well During a Coiled Tubing Unloading Operation

2021 ◽  
Author(s):  
Merit P. Ekeregbe
Keyword(s):  
Mathematical Model ◽  
Decision Making ◽  
Cost Estimation ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Correct Prediction ◽  
Reservoir Pressure ◽  
Gas Industry ◽  
Coiled Tubing ◽  
The Mathematical Model

Abstract In an era where cost is a significant component of decision making, every possibility of reducing operational cost in the Oil and Gas industry is a welcome development. The volatile nature of the Oil market creates uncertainty in the industry. One way to manage this uncertainty is by the ability to predict and optimize our operations to reduce all of our cost elements. When cost is planned and predicted as accurately as possible, the operation optimizations can be managed efficiently. Practically, all new drills require CT unloading of the completion or kill fluids to allow the natural flow of the wells. Hitherto, there is no mathematical model that combines information from one of the wells in an unloading dual completion project that can be used to aid decision-making in the other well for the same unloading project and thereby result in an effective cost-saving. Deploying the mathematical model of cost element prediction and optimization can minimize operational unloading costs. The two strings of the dual completion flow from different reservoirs. Still, the link between the two drainages post completion is the kill fluid density, and can aid in cost estimation for optimum benefit. The lesson learned or data acquired from the lifting of the slave reservoir string can be optimized to effectively and efficiently lift the master reservoir string. The decision of first unloading the slave reservoir string is critical for correct prediction and optimization of the ultimate cost. The mathematical model was able to predict the consumable cost elements such as the gallon of nitrogen and time that may be spent on the long string from the correlative analysis of the short string. The more energy is required for unloading the short string and it is the more critical well than the long string because it is the slave string since no consideration as such is given to it when beneficiating the kill fluid to target the long string reservoir pressure with a certain safety overbalance. The rule for the mud weight or the weight of the kill fluid is the highest depth with highest reservoir pressure which is the sand on the long string. With the data from the short string and upper sand reservoir, the lift depth and unloading operation can be optimized to save cost. The short string will incur the higher cost and as such should be lifted last and the optimization can be done with the factor of the LS.

Field Trials for a Novel Water Deoiling Process for the Upstream Oil and Gas Industry

2004 ◽  
Author(s):  
Pierre Le Foll ◽  
Moin Khan ◽  
Jean-Pierre Parent ◽  
Frederic Agrapart
Keyword(s):  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Field Trials ◽  
Gas Industry ◽  
Deoiling Process
Sign in / Sign up

Export Citation Format

Share Document