scholarly journals Probabilistic Modeling for Manufacturing of Automotive Electric Equipment

2021 ◽  
Author(s):  
Vladimir Kozlovsky ◽  
Yury Klochkov
Keyword(s):  
Quality Control ◽  
Technological Process ◽  
Quality Criterion ◽  
Probabilistic Modeling ◽  
Electrical Equipment ◽  
Manufacturing Processes ◽  
Effective Management ◽  
Design And Manufacturing ◽  
Electric Equipment ◽  
The Relationship

Abstract A generalized quality criterion is proposed for the processes of designing and manufacturing electrical equipment. The relationship between the parameters of the technological process of manufacturing electrical equipment and the ones of statistical plans acceptance quality control is taking into account for the calculation of the criterion. This creates the prerequisites for effective management of design and manufacturing processes to achieve the desired level of quality.

scholarly journals Single, context-specific glycans can target misfolded glycoproteins for ER-associated degradation

2005 ◽  
Vol 169 (1) ◽  
pp. 73-82 ◽  
Author(s):  
Eric D. Spear ◽  
Davis T.W. Ng
Keyword(s):  
Quality Control ◽  
Endoplasmic Reticulum ◽  
Secretory Protein ◽  
Carboxypeptidase Y ◽  
Er Quality Control ◽  
Systematic Analysis ◽  
Proteinase A ◽  
Context Specific ◽  
The Relationship ◽  
Erad Pathway

The endoplasmic reticulum (ER) maintains an environment essential for secretory protein folding. Consequently, the premature transport of polypeptides would be harmful to the cell. To avert this scenario, mechanisms collectively termed “ER quality control” prevent the transport of nascent polypeptides until they properly fold. Irreversibly misfolded molecules are sorted for disposal by the ER-associated degradation (ERAD) pathway. To better understand the relationship between quality control and ERAD, we studied a new misfolded variant of carboxypeptidase Y (CPY). The molecule was recognized and retained by ER quality control but failed to enter the ERAD pathway. Systematic analysis revealed that a single, specific N-linked glycan of CPY was required for sorting into the pathway. The determinant is dependent on the putative lectin-like receptor Htm1/Mnl1p. The discovery of a similar signal in misfolded proteinase A supported the generality of the mechanism. These studies show that specific signals embedded in glycoproteins can direct their degradation if they fail to fold.

A Study on Working capital Management in Hindustan Petroleum Corporation Limited

2021 ◽  
pp. 164-168
Author(s):  
Sruthi B ◽  
Rashmi R
Keyword(s):  
Annual Report ◽  
Pearson Correlation ◽  
Secondary Data ◽  
Effective Management ◽  
Capital Management ◽  
Working Capital ◽  
Short Term ◽  
Working Capital Management ◽  
The Past ◽  
The Relationship

Working capital management is important for every organization as it refers to the effective management of current assets and current liabilities. The aim is to make sure that the firm is capable to continue its operations and it has sufficient cash flow to satisfy both maturing short-term debt and upcoming operational expenses. In this paper, an attempt has been made to study the management of working capital in Hindustan Petroleum Corporation Limited, a leading public sector enterprise in India over a period of 10 years (That is from 2009-10 to 2018-19). The paper also attempts to study the components of working capital and analyze the relationship between liquidity and profitability of HPCL. The study is based on secondary data collected from annual report of HPCL for the past 10 years, Pearson correlation and regression model are used for this purpose. From the study it is found that there is a significant relationship between liquidity and profitability.

BEHAVIORAL IMPLICATIONS OF ADAPTION INNOVATION: I. MANAGERIAL EFFECTIVENESS AS A FUNCTION OF SEX DIFFERENCES IN ADAPTION-INNOVATION

1989 ◽  
Vol 17 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Nicholas F. Skinner
Keyword(s):  
Sex Differences ◽  
Cognitive Style ◽  
Management Style ◽  
Effective Management ◽  
Managerial Effectiveness ◽  
Male And Female ◽  
Female Managers ◽  
The Relationship

Three studies investigated the relationship between effective management and the positions of male and female managers on Kirton's cognitive style dimension of adaption (doing things better) vs. innovation (doing things differently). Both sexes equated innovation with effective male management and adaption with effective female management. The role in management style of characteristic sex-specific differences in adaption-innovation is discussed.

scholarly journals 3D Digitization and Additive Manufacturing Technologies in Medicine

2018 ◽  
Vol 26 (42) ◽  
pp. 165-170
Author(s):  
Ivan Molnár ◽  
Ladislav Morovič
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Processes ◽  
Design And Manufacturing ◽  
Medical Aids ◽  
Manufacturing Methods ◽  
Manufacturing Technologies ◽  
Design And Manufacture ◽  
3D Digitization ◽  
The Given

Abstract The paper discusses the use of 3D digitization and additive manufacturing technologies in the field of medicine. In addition, applications of the use of 3D digitization and additive manufacturing methods are described, focusing on the design and manufacture of individual medical aids. Subsequently, the process of designing and manufacturing of orthopedic aids using these technologies is described and the advantages of introducing the given technologies into the design and manufacturing processes in the medicine sector are presented.

scholarly journals CERTIFICATION OF VEGETABLE OILS AND QUALITY CONTROL IN THE TECHNOLOGICAL PROCESS OF PRODUCTION

2019 ◽  
Vol 2019 (4) ◽  
pp. 119-126
Author(s):  
CH Bekmurotov ◽  
Keyword(s):  
Quality Control ◽  
Technological Process ◽  
Vegetable Oils ◽  
Raw Materials ◽  
Cottonseed Oil ◽  
Product Classification ◽  
Cotton Seeds ◽  
The Cost

The article reviewed the certification and quality control of the technological process for the production of vegetable oil. There is a procedure for packaging, quality control of products, determination of quality indicators and quality control of finished products. The procedure for using refined cottonseed oil and its varieties, the requirements for placement and storage of vegetable oils, as specified in the regulatory documents, the quality control of vegetable oils and other solutions for cottonseed oil are provided. The gas analyzer shows a solution for measuring the amount of solution by painting the tubes of a mixture of gas and air in oil. Detailed information on the production of vegetable oils, the cost of raw materials, the level of fat content of cotton seeds and the methods used to produce oil from cotton seeds. Methods for certification of vegetable oils, types of quality control, methods of testing and quality determination are presented. It was shown that the procedure for refined production of cottonseed oils and their types, as well as the state of the product classification of products based on the method of producing vegetable oils for consumer purposes, analysis of the sequence of refined oils and refining processes.

scholarly journals Logical-probabilistic assessment of the occurrence of destruction during intersystem interactions in the electrical system of the seaport

2021 ◽  
Vol 2061 (1) ◽  
pp. 012131
Author(s):  
O N Litskevich ◽  
A P Litskevich
Keyword(s):  
Technological Process ◽  
Power Supply ◽  
Physical Nature ◽  
Electrical Equipment ◽  
Technical Condition ◽  
Power Line ◽  
Electrical System ◽  
Cable Line ◽  
Composite Object ◽  
Electrical Wear

Abstract This article solves the problem of a quantitative assessment of the occurrence of destruction in the intersystem interactions of the transport system and the electrical system of the seaport, in the conditions of the technological process in the seaport, which indicates its significant impact on the electrical system, as a result of which the reliability of the berthing power line is significantly reduced. The intersystem interactions that occur during the implementation of the technological process, as experience shows, are the causes of critical situations that occur at the border of areas of different physical nature, and the consequences are recorded, in the case under consideration, in the electrical system. A mathematical model describing intersystem destruction in quantitative form is presented in this paper using a logical-probabilistic model that reflects internal and external relationships. In the object under study, the destructive cause (collision) and the consequence (accumulation of electrical damage in the insulation of the cable line) are in the same object (the mooring power supply unit), and this is limited to the effects of intersystem destruction. In such a statement, the object of power supply of the technological process and equipment is considered as a composite object containing a cable line and an electric contact column. The problem being formulated is an important and relevant scientific task, which includes not only the question of identifying the causes of increased electrical wear of the power line, but also the development of methods for obtaining quantitative results, and in practical terms also involves the diagnosis of the technical condition of electrical equipment and timely preventive maintenance.

scholarly journals APPLYING OF ACTIVITIES MANAGEMENT BASED ON SELF-LEARNING

2018 ◽  
Vol 1 ◽  
pp. 29-38 ◽  
Author(s):  
Valerii Samsonkin ◽  
Valerii Druz’ ◽  
Albert Feldman
Keyword(s):  
Quality Management ◽  
Technological Process ◽  
Human Activities ◽  
System Approach ◽  
Human Operator ◽  
Statistical Regularity ◽  
Effective Management ◽  
The Individual ◽  
First Time ◽  
Self Learning

The article is devoted to a brief presentation and application in practice of an effective management way of human activities and human-technical communities one. This way was called Method of statistical regularity (Method of self-organizing processes). In fact, this is a system approach. For the first time, the application of this approach is shown on the example of quality management of the technological process. Practical management is shown using an algorithm. The effectiveness of the author's system approach is explained by the consideration of the final result of the activity as a goal and a system-forming factor of activity, taking into account the individual features of the management object, real statistics of activity. The system approach described in the article is a universal devise of management. It can be used and already used to manage individual functions of the enterprise, the process, the human operator, the community

Sign in / Sign up

Export Citation Format

Share Document