scholarly journals Determination of toxic elements in meat products from Serbia packaged in tinplate cans

2021 ◽  
Author(s):  
Branislav Stojanović ◽  
Saša Janković ◽  
Vesna Đorđević ◽  
Sonja Marjanović ◽  
Dragan Vasilev ◽  
...  
Keyword(s):  
Toxic Elements ◽  
Raw Materials ◽  
Food Additives ◽  
Meat Products ◽  
Storage Period ◽  
Armed Forces ◽  
Expert Committee ◽  
Small Risk ◽  
Canned Meat

Abstract This work aimed to examine the influence of the storage period on the content of toxic elements (As, Cd, Pb, and Hg), in five types of canned meat products, which are regularly used in the Serbian Armed Forces. Cans of beef goulash (BG), pork ragout (PR), spam (SP), liver pate (LP), and meatballs in tomato sauce (MB), produced according to military standards, and stored under regular conditions (temperature up to max 25 °C and relative humidity up to max 75%), were analyzed in this research. Meat products were made according to the special military requirements, packed in tinplate cans, and stored for up to 6 years. The highest average contents of toxic elements were found to be 10.00 µg/kg for arsenic in BG, 35.91 µg/kg for cadmium in LP, 15.04 µg/kg for mercury in PR, and 8.00 µg/kg for lead in PR. The storage period did not significantly affect the level of toxic elements, although higher concentrations were found in samples stored for more than two years. The influence of raw materials, spices, and additives on the level of toxic elements in some meat products was also examined. None of the samples contained toxic elements at levels exceeding the currently maximum permitted levels. The consumption of this type of food represents a small risk to human health because the exposure of soldiers to toxic elements, calculated as weekly intake, is far below legal PTWI/TWI limits, established by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and European Food Safety Authority (EFSA).

TECHNOLOGY OF MEAT COOKING IN THE AUTOCLAVE WITH PRESERVATION OF CHEMICAL PROPERTIES OF ANIMAL RAW MATERIALS

2018 ◽  
Author(s):  
Inna Nazarenko ◽  
◽  
Nataliya Novosad ◽  
Keyword(s):  
Nutritional Value ◽  
Raw Materials ◽  
Meat Products ◽  
Chemical Properties ◽  
Periodic Action ◽  
Meat Cooking ◽  
Canned Meat ◽  
Long Term Preservation

The article examines the technology of cooking meat by autoclaving while preserving the chemical properties of the product. Autoclaving has been shown to be one of the main technological steps in canned meat. Sterilization of canned meat is a heat treatment of the product, which ensures the death of microflora to prevent microbiological spoilage at temperate temperatures (15-30oC), and if necessary at higher temperatures, and safety, which guarantees the microbiological indicators of the use of canned food for food. Sterilize meat at temperatures above 100o C, most often at temperatures up to 120o C. It has been determined that sterilization of meat in an autoclave determines the preservation of nutritional value, organoleptic properties, harmless to the consumer and creates the necessary prerequisites for long-term preservation of the quality of canned meat products. The technology of cooking meat is reduced to the choice of parameters (temperature and duration) of heating, which ensure maximum destruction of the microflora with minimal loss of nutritional value. Sterilization is carried out in autoclaves of periodic action. Banks with the product are loaded into the baskets of the autoclave, lowered into the autoclave, seal the device, heated to the desired temperature, withstand the required time, then release the pressure, cool and unload.

scholarly journals Prospects for the use of natural food additives in the production of sausage products

2021 ◽  
Vol 81 (1) ◽  
pp. 118-125
Author(s):  
D. Sviderskaya ◽  
◽  
V. Ovsyannikova ◽  
A. Karabekova ◽  
A. Orazbekova ◽  
...  
Keyword(s):  
Negative Impact ◽  
Raw Materials ◽  
Research Result ◽  
Food Additives ◽  
Meat Products ◽  
Natural Food ◽  
Organization And Management ◽  
Organoleptic Characteristics ◽  
Urgent Task ◽  
Natural Additives

Main problem: Modern manufacturers of products, by the current market conditions, should take care that their products are competitive and attractive in consumer terms, but also the economic efficiency of its production is important. In this regard, in the production of food products, including meat, the use of various additives that allow to make products with more pronounced organoleptic properties, increased shelf life, increased nutritional and biological value are used. Analyzing the products presented on the market, it was revealed that the use of food additives of chemical origin is more than common among today's manufacturers, because they allow producing products that are lower in cost by improving the taste and aroma properties of the product, using low-quality raw materials or replacing natural raw materials with artificial components. Despite the widespread use of such additives, they still remain not sufficiently studied. Purpose: It is necessary to revise the traditional range of meat products in the country by direction of increasing the volume of production of products from natural and chopped meat with a variety of attractive organoleptic characteristics. It is a modern principle of organization and management of food industry enterprises. Methods: In this regard, the use of new natural ingredients in the production of meat sausage products becomes an urgent task. Considering the field of food technologies, it should be noted that currently there is a tendency to increase the consumption of food enriched with natural additives. Results and their significance: Based on our research, result was obtained showing that chemical food additives negatively affect the microflora of the gastrointestinal tract. As a result, it was decided to develop a new type of sausage products using natural additives, such as rosemary and blueberry fruits. This article provides a justification for their use in the production of sausage products as an alternative to various chemical food additives that can have a negative impact on the human body.

scholarly journals DETERMINATION OF THE BIOLOGICAL VALUE OF CHOPPED SEMI-FINISHED PRODUCTS WITH A COMPLEX FOOD ADDITIVE ENZYMATIC METHOD

2021 ◽  
Vol 12 (1) ◽  
pp. 48-55
Author(s):  
N. M. Sonko ◽  
V. Yu. Sukhenko ◽  
O. A. Shtonda
Keyword(s):  
Proteolytic Enzymes ◽  
Raw Materials ◽  
Food Additives ◽  
Control Sample ◽  
Meat Products ◽  
Food Supplement ◽  
Enzymatic Method ◽  
Important Indicator ◽  
Biological Value ◽  
Minced Meat

When creating meat products, one of the main indicators is the biological value of the product. The biological value of proteins depends on the degree of their assimilation, in animal proteins is greater than in vegetable. More than 90% of amino acids are absorbed from animal proteins in the intestine. An important indicator of the biological value of proteins is their attack by digestive enzymes - the property to be hydrolyzed with the participation of enzymes in the gastrointestinal tract.Enzymatic methods for determining the biological value of a protein are one of the simplest and at the same time objective methods for determining its ability to be broken down by proteolytic enzymes in the gastrointestinal tract.The article presents a study on the biological value of minced meat semi-finished products. For the studies we used chopped semi-finished products (cutlets) control sample and three test samples with partial introduction into the formulation of food additives based on animal and vegetable raw materials - 0.5 %, 0.75 % and 1.0 %, respectively. Hydration of the additive is 1:15. The food supplement contains g / 100 g: sodium alginate - 60, whey protein - 16, soy fiber - 24. To determine the biological value of the products by the enzymatic method used a device for hydrolysis of proteins. The essence of the method is a six-hour hydrolysis by enzymes of a sample of the finished product. The first stage is fermentation with pepsin (3 hours), the second stage is trypsin (3 hours). With hourly selection of hydrolysis products to determine the degree of digestibility at a certain stage of the study. It is proved that the addition to the recipe of chopped semi-finished food mixture is advisable, as it allows to obtain chopped semi-finished product with better digestibility. The digestibility of the experimental samples was slightly higher than the control. The digestibility index for control was – 69 %, and for experimental – 68-74 %. Therefore, according to research, we can say about the feasibility of using additives in the production of minced meat semi-finished products with a share of replacement of basic raw materials from 8 % to 16 %.

scholarly journals Development of sausage bread technology with a functional orientation based on flax seed products

2019 ◽  
Vol 80 (4) ◽  
pp. 177-184
Author(s):  
S. P. Merenkova ◽  
I. Yu. Potoroko ◽  
V. V. Semizdralova
Keyword(s):  
Fatty Acids ◽  
Phosphorus Content ◽  
Raw Materials ◽  
Lipid Fraction ◽  
Food Additives ◽  
Meat Products ◽  
Saturated Fat ◽  
Products Analysis ◽  
Carcinogenic Substances ◽  
Functional Orientation

Consumers associate the finished meat products with negative health effects that are connected with a high content of saturated fat; food additives and carcinogenic substances. Consumer demand for functional products with a reduced amount of saturated fats is growing. The purpose of scientific research was justification the functional properties of sausage bread manufactured using protein-fatty emulsions based on flour made from flax-LM-98 Raziol; Ural. In the recipe of sausage bread 15% of fat and meat raw materials were replaced by the protein-fatty emulsion based on flax flour. It is established: addition of emulsion contributes to a more pronounced flavor and aroma, attractive appearance and drawing on a cut of meat products. Analysis of the chemical composition meat products showed an increase in fat content on 12.7-23.7%; soluble and insoluble dietary fibers concentration; calcium and phosphorus content. The experiment proved the high biological value of lipid fraction in sausages containing flax flour. Content of polyunsaturated fatty acids increased by 15.8–29.2%, concentration of (-3 fatty acids increased 3.7–7.7 times. The ratio of (-3:(-6 fatty acids in samples with flax flour of Ural grade amounted to 1:1.3, consumption of 50 g sausages satisfies the daily need in (-3 fatty acids by 60.8%. The ratio of (-3:(-6 fatty acids in samples with flax flour of Raziol grade amounted to 1:3.3; consumption of 50 g sausages satisfies the daily need in (-3 by 29.5%. Sausage bread containing 5.6% flax flour Ural and Raziol varieties should be attributed to functional foods, due to the high content of functional component and the ability to satisfy more than 15% of the daily need for (-3 fatty acids.

Effect of a Short Cold Storage on Frequency of Spoilage in Pasteurized (Perishable) Canned Meat Products Subjected to the Incubation Test

1987 ◽  
Vol 50 (1) ◽  
pp. 56-58
Author(s):  
S. KAFEL ◽  
E. JOZWIK
Keyword(s):  
Cold Storage ◽  
Meat Products ◽  
Storage Period ◽  
Meat Processing ◽  
Processing Plants ◽  
Canned Meat

Investigations were carried out in 6 meat processing plants in Poland on the effect of a short storage period on the results of the incubation test of various canned pasteurized meat products. From the daily consignments, 1% of the cans was reserved within 1–3 d of production and incubated at 37°C for 3 d. The remaining cans of the consignments were stored at around 8°C. When spoilage resulted in one or more of the incubated cans from any consignment, about 2% of other cans from that consignment were taken, and the incubation test was repeated. These later incubation tests were initiated 7–10 d after the date of production. From among 4,322 cans subjected to first incubation test 980 (22.67%) produced swells but in the repeated incubation carried out on 8,290 cans only 347 (4.18%) became swollen. It is concluded that the bacteria responsible for spoilage of canned pasteurized meat products may disappear or lose their ability to spoil these products during the storage under refrigeration.

RATIONAL DOSAGES FOR USE OF EMULSIONS FROM COLLAGEN-CONTAINING RAW MATERIALS IN MEAT PRODUCTS WITH DIFFERENT DEGREE OF MEAT RAW MATERIAL GRINDING

2021 ◽  
Vol 14 (3(53)) ◽  
pp. 62-70
Author(s):  
Irina Vasilevna Kaltovich
Keyword(s):  
Connective Tissue ◽  
Raw Materials ◽  
Meat Products ◽  
Raw Material ◽  
Mechanical Parameters ◽  
Technological Preparation ◽  
Genus Lactobacillus

The article presents the results of research on the determination of rational dosages for the use of emulsions from collagen-containing raw materials, which have undergone technological preparation, in meat products with various degrees of grinding of meat raw materials. It has been found that the optimal dosages for adding emulsions from pork skin and tails fermented by bacteria of the genus Lactobacillus (c (Lb.plantarum: Lb.casei (1:1)) = 1 Ч 107 CFU/g,? = 18 hours, t = 34 °C, 1:2 hydraulic module) to meat products, allowing to provide improved functional-technological and structural-mechanical parameters of these products, are as follows: for model stuffing systems from raw materials subjected to chopping during 8-12 minutes - up to 16%, 2-4 minutes - up to 14%, mincing with diameter of grid holes 2-3 mm - up to 12%, and from blanched raw materials subjected to chopping during 5-7 minutes - up to 20%. At the same time, emulsions from connective tissue fermented by bacteria of the genus Lactobacillus are recommended for use in meat products in the following rational dosages: up to 14% - for model stuffing systems from raw materials subjected to chopping for 8-12 minutes, up to 18% - from blanched raw materials subject to chopping for 5-7 minutes, up to 12% - from raw materials subject to chopping for 2-4 minutes, up to 10% - from raw materials subject to chopping with diameter of grid holes of 2-3 mm.

scholarly journals Determination of toxic elements in meat products from Serbia packaged in tinplate cans

2021 ◽  
Author(s):  
Branislav Stojanović ◽  
Saša Janković ◽  
Vesna Đorđević ◽  
Sonja Marjanović ◽  
Dragan Vasilev ◽  
...  
Keyword(s):  
Toxic Elements ◽  
Meat Products

scholarly journals Examination of Canned Meat Products in Forensic Commodity Analysis

2021 ◽  
Vol 16 (2) ◽  
pp. 89-96
Author(s):  
M. A. Zubova
Keyword(s):  
Research Program ◽  
Laboratory Tests ◽  
Raw Materials ◽  
Meat Product ◽  
Meat Products ◽  
Food Products ◽  
Technical Documentation ◽  
Expert Analysis ◽  
Canned Meat ◽  
Quantitative Indicators

The article presents a specific methodology for forensic commodity examination of food products: expert analysis of canned meat and meat-containing products made of different raw materials. On a specific example from expert practice – conduct of a forensic commodity examination of a consignment of 12600 cans of meat product “beef stew” – the author shows the research program and its stages: sampling, establishment of the commodity affiliation of goods, analysis of the actual characteristics (markings, consumer packaging) of the tested products and verification of their compliance with the requirements of regulatory and technical documentation; measurement of quantitative indicators of products; examination of the submitted laboratory tests protocols.

Enhancing national standards for meat and dairy industry

2021 ◽  
Vol 9 (16) ◽  
pp. 150-163
Author(s):  
Irіna Romanchuk ◽  
◽  
Kateryna Kopylova ◽  
Serhii Verbytskyi ◽  
Olha Kozachenko ◽  
...  
Keyword(s):  
Food Industry ◽  
Raw Materials ◽  
Meat Products ◽  
Technical Committee ◽  
International Standards ◽  
National Standards ◽  
Technical Regulation ◽  
Milk Products ◽  
Classification Code

The subject of research is standardization as one of the forms of technical regulation in the food industry of Ukraine, in particular in the production of milk and milk products, meat and meat products, determination of safety and quality parameters of the specified food raw materials and finished products made from those, as well as installations and equipment for the food industry. The purpose of the study is to analyze the state of standardization in the production of dairy and meat products, highlight the existing problems and possible ways to solve them, as well as outline the role that the Technical Committee for Standardization 140 “Milk, meat and products of their processing” should play in these processes. Methods. During the research, a systematic approach was used to research factual materials, in particular scientific and scientific-practical literature, regulatory legal acts, regulatory documents and the like, abstract-logical approach to the synthesis of research results and the formulation of conclusions. The results of the study. National standards of Ukraine DSTU is the base of the technical regulation in relation to food products and methods of their control. The above also applies to standardization in the field of milk and meat products, which is within the competence scope of the Technical Committee for Standardization 140 “Milk, meat and products of their processing”. Technical Committee 140 carries out significant work to develop new and update existing national standards in accordance with its area of competence, in particular, it has significant success in harmonizing international and European standards. As of January 15, 2021, according to the classification code 67.100 (Milk and milk products) out of 203 standards of the nationwide force, 103 standards (50.7%) were developed by harmonizing the relevant international standards EN, ISO, etc. According to the classification code 67.120 (Meat, meat products and other animal products) – 202 units, 26 units and 14.1 %, respectively, according to the classification code 67.260 (Installations and equipment for the food industry) – 99 units, 86 units and 86.9%, respectively. The issue of attracting extra-budgetary funds for the harmonization of international standards and the implementation of the entire range of works on standardization is urgent. The issue of proper regulatory support for the production and operation of specialized technological equipment for food and processing industry enterprises is relevant, for which it is advisable to combine the domestic traditions of standardization with the priorities of safety and hygiene of machines, as well as ecology, which are in force in international practice. Scope of research results. The results of the studies performed will be used in the field of technical regulation, in particular, national standardization, of milk and milk products, meat and meat products, determination of safety and quality indicators of the specified food raw materials and finished products made from it, as well as installations and equipment for the food industry.

Sign in / Sign up

Export Citation Format

Share Document