scholarly journals DETERMINATION OF THE BIOLOGICAL VALUE OF CHOPPED SEMI-FINISHED PRODUCTS WITH A COMPLEX FOOD ADDITIVE ENZYMATIC METHOD

2021 ◽  
Vol 12 (1) ◽  
pp. 48-55
Author(s):  
N. M. Sonko ◽  
V. Yu. Sukhenko ◽  
O. A. Shtonda
Keyword(s):  
Proteolytic Enzymes ◽  
Raw Materials ◽  
Food Additives ◽  
Control Sample ◽  
Meat Products ◽  
Food Supplement ◽  
Enzymatic Method ◽  
Important Indicator ◽  
Biological Value ◽  
Minced Meat

When creating meat products, one of the main indicators is the biological value of the product. The biological value of proteins depends on the degree of their assimilation, in animal proteins is greater than in vegetable. More than 90% of amino acids are absorbed from animal proteins in the intestine. An important indicator of the biological value of proteins is their attack by digestive enzymes - the property to be hydrolyzed with the participation of enzymes in the gastrointestinal tract.Enzymatic methods for determining the biological value of a protein are one of the simplest and at the same time objective methods for determining its ability to be broken down by proteolytic enzymes in the gastrointestinal tract.The article presents a study on the biological value of minced meat semi-finished products. For the studies we used chopped semi-finished products (cutlets) control sample and three test samples with partial introduction into the formulation of food additives based on animal and vegetable raw materials - 0.5 %, 0.75 % and 1.0 %, respectively. Hydration of the additive is 1:15. The food supplement contains g / 100 g: sodium alginate - 60, whey protein - 16, soy fiber - 24. To determine the biological value of the products by the enzymatic method used a device for hydrolysis of proteins. The essence of the method is a six-hour hydrolysis by enzymes of a sample of the finished product. The first stage is fermentation with pepsin (3 hours), the second stage is trypsin (3 hours). With hourly selection of hydrolysis products to determine the degree of digestibility at a certain stage of the study. It is proved that the addition to the recipe of chopped semi-finished food mixture is advisable, as it allows to obtain chopped semi-finished product with better digestibility. The digestibility of the experimental samples was slightly higher than the control. The digestibility index for control was – 69 %, and for experimental – 68-74 %. Therefore, according to research, we can say about the feasibility of using additives in the production of minced meat semi-finished products with a share of replacement of basic raw materials from 8 % to 16 %.

scholarly journals Use of Non-Traditional Types of Flour in the Flour Culinary Production (Pancakes)

Food Industry ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 33-37
Author(s):  
Vladislav Tiunov ◽  
Olga Chugunova ◽  
Aleksandr Arisov
Keyword(s):  
Wheat Flour ◽  
Raw Materials ◽  
Food Additives ◽  
Control Sample ◽  
Food Products ◽  
Biologically Active ◽  
Optimal Dosage ◽  
Soya Flour ◽  
Complete Replacement ◽  
Biological Value

Currently, Strategy for Improving the Food Products Quality in the Russian Federation until 2030 identifies the need to develop new food products as one of the important state tasks; the quality improvement of raw materials used, the nutritional and biological value of finished products and expanding its range are an urgent area of scientific research. Flour culinary products are no exception. These products made from traditional wheat flour of the highest grade have low nutritional value, high calorie, lack of vitamins and minerals. In order to increase the biological value of flour culinary products, a man adds food additives and biologically active substances; uses non-traditional raw materials for the production. The article considers the possibility of using non-traditional flour types mixtures instead of wheat flour of the highest grade in the production of flour culinary products (pancakes). The researchers developed the optimal dosage for adding mixtures of rice and corn, rice and amaranth, rice and soya flour to the product formulations. They studied comprehensively the regulated indicators of product quality and safety: organoleptic, physical and chemical, microbiological; run the comparative analysis of samples from non-traditional types of flour with a control sample. The authors developed the pancakes technology in the form of baking it in a convection steamer with a complete replacement of wheat flour with a mixture of rice and corn, rice and amaranth, rice and soya flour. They compiled technological maps and formulated a technical document package on the products range.

scholarly journals Investigation of organoleptic and functional-technological parameters of meat breads using mechanically deboned poultry meat

2019 ◽  
Vol 21 (91) ◽  
pp. 3-8 ◽  
Author(s):  
V. I. Tischenko ◽  
N. V. Bozhko ◽  
V. M. Pasichnyi ◽  
V. V. Brazhenko
Keyword(s):  
Nutritional Value ◽  
Raw Materials ◽  
Control Sample ◽  
Meat Products ◽  
Nutrient Deficiency ◽  
Raw Material ◽  
Poultry Meat ◽  
Material Base ◽  
Technological Parameters ◽  
Minced Meat

Creation of combined meat products combining traditional consumer properties, as well as the possibility of using non-traditional raw materials in their recipes, is aimed at the expansion and rational use of the raw material base of the meat processing complex and solves the problem of reducing nutrient deficiency in the diet of the population. Therefore, the issue of the use of mechanically deboned poultry meat in meat bread technology and its impact on qualitative indicators and functional and technological properties is relevant. The aim of the research was to study the feasibility of the use of mechanically deboned poultry meat in the technology of combined products. Three model recipes based on the formula-meat analogue “Chainyyi” were developed. The possibility of replacing beef and pork meat with duck meat and mechanically deboned poultry meat of turkey was studied in the bread recipes. The total amount of duck meat and mechanically deboned poultry meat was 63%. As a protein ingredient able to bind moisture and relatively inexpensive compared to meat raw material, 20% of the pig's heart was added to the formulation, as well as 2% XB Fiber. Other components of the analogue formulation have not changed. Combination of duck meat with mechanically deboned poultry meat of turkey and pork hearts in the abovementioned ratios as part of meatcontaining bread stuffing systems allowed to improve the nutritional value of the product and its qualitative indices. The research confirmed the possibility of combining regional and relatively cheap raw materials to increase the nutritional value of meatcontaining products, namely breads. The bulk of proteins in the experimental samples increased by 6.57–10.38% and was within the range of 17.96–17.34%. On average, 4.98% decreased the fat content, the product became less calorie relative to the analogue by 15.98–16.76%. The formulations of model minced meat were distinguished by a higher index of the water-holding capacity, the content of binding moisture and the best indicators of plasticity. This affected the quantity of finished products, which amounted to 120.64–117.3% to the mass of raw materials, while in the control sample this figure was lower by 3.49–7.47%.

scholarly journals Research of functional and technological properties of minced meat products with using fish raw materials

2018 ◽  
Vol 20 (90) ◽  
pp. 22-26
Author(s):  
Y. Matsuk ◽  
I. Marchenko ◽  
V. Pasichnyi
Keyword(s):  
Raw Materials ◽  
Control Sample ◽  
Meat Products ◽  
Absorption Capacity ◽  
Raw Material ◽  
Partial Replacement ◽  
Production Cycle ◽  
Technological Properties ◽  
Technological Parameters ◽  
Minced Meat

The article is devoted to the improvement of the recipes of minced meat products with using fish raw materials and the study of organoleptic and functional and technological properties of developed minced meat systems and finished products. The research has been carried out on the rational combining of meat and fish raw materials and the expansion of assortment of minced semi-finished products. The formulations of minced meat systems for the production of meat semi-finished with a partial replacement of the main raw material to fish raw materials have been developed. The organoleptic and functional and technological parameters of minced meat systems and finished products are investigated. According to the results of the organoleptic evaluation, it was found that partial replacement of meat raw material with minced fish does not worsen the sensory characteristics of minced meat products. It is established that in comparison with the control sample there is an improvement of functional and technological indicators. In particular, the moisture content increased by an average of 6.1%, moisture absorption capacity – 5.91%, energy absorption capacity – 2.49%, fat-retaining ability – 2.52%. The obtained results confirmed the expediency of using minced meat with pollack in the technology of minced meat semi-finished products with due observance of the parameters of production cycle of heat treatment of products. It has been theoretically substantiated and experimentally confirmed the technology of meat products using minced meat and developed recipes. It has been established that with careful selection of components that are part of minced meat semi-finished products with the addition of fish raw materials can increase the organoleptic and functional and technological parameters of finished products. The obtained data suggest that the improved recipes of minced meat semi-finished products can be recommended for production by enterprises of the meat industry and restaurants

scholarly journals A study of combined minced meat from hydrobionts for snacks

2021 ◽  
Vol 39 (No. 2) ◽  
pp. 140-148
Author(s):  
Natalia Valerievna Dementieva ◽  
Tatyana Maryanovna Boitsova ◽  
Valery Dmitrievich Bogdanov
Keyword(s):  
Raw Materials ◽  
Food Additives ◽  
Viscosity Index ◽  
Meat Products ◽  
High Water ◽  
Rheological Parameters ◽  
Organoleptic Evaluation ◽  
Fish Mince ◽  
Minced Meat ◽  
Snack Products

This paper considers the developments whose application is promising for the fishing industry under the production of dried snack products. Fish chips are non-traditional dried products. The goal of this research was to study the functional and technological properties of minced systems consisting of fish and seafood. Minced systems were pre-treated with special food additives to improve their rheological properties and organoleptic indicators. The objects of research were stuffed meat products which included 65% to 75% of pollock, 15% of Pacific herring, and 10% to 20% of seafood. A study of technochemical indicators showed that minced systems were high-protein. They contained 30.0–34.8% of protein, 2.2–3.7% of lipids, and 0.8–2.5% of carbohydrates. Minced systems made of hydrobionts are characterised by the high water-holding capacity of 74.52–90.3%, which indicates good lyophilic properties of raw materials. When studying the rheological parameters of minced systems from hydrobionts, it was found that the maximum shift tension was 6.0–8.1 kPa. The stickiness index was 2 400–3 200 Pa, the dynamic viscosity was within the range of 650–850 Pa s (pascal seconds). The effective viscosity index for fish mince with good mouldability is 600–900 Pa s. The organoleptic evaluation showed that minced systems from hydrobionts pre-treated with food additives had high sensory characteristics.

scholarly journals Quality assessment of meatcontaining semi-finished minced products with duck meat

2019 ◽  
Vol 21 (92) ◽  
pp. 8-13
Author(s):  
N. V. Bozhko ◽  
V. I. Tischenko ◽  
V. M. Pasichnyi
Keyword(s):  
Raw Materials ◽  
Meat Products ◽  
Second Grade ◽  
Meat Processing ◽  
Biological Value ◽  
Turkey Meat ◽  
Limiting Amino Acids ◽  
Minced Meat ◽  
Further Development ◽  
Positive Effect

An urgent issue for meat processing companies is to expand their product range and increase production, and to make the product economically viable for the consumer. One of the ways to solve this problem is to produce meat-containing foods. Research on the development of new meatcontaining semi-finished formulations using locally sourced meat and animal protein ingredients to make high-value, affordable food available to consumers is promising and needs further development. The purpose of our work was to substantiate the feasibility of production of meatcontaining chopped semi-finished products with duck meat and mechanically deboned turkey meat, expanding the range of meat products, while increasing the biological value. Three model recipes were developed on the basis of the recipe-analogue of “Domashni” cutlets. The possibility of replacing of pork and beef for duck meat and mechanically deboned turkey meat was studied in semi-finished chopped meatcontaining products. The total number of duck meat and mechanically deboned turkey meat (MDTM) was 61%. The other components of the formulations did not change. Combining duck meat with MDTM in the proposed proportions in the meatcontaining systems of the patties allows improving the nutritional and biological value of the product and its quality indicators. Replacing second-grade beef with MDTM and pork with duck meat allows getting model minced meat with functional and technological indicators at the level of traditional patties. The use of secondary protein raw materials, namely MDTM, makes possible to obtain chopped semi-finished products with high nutritional value: increased protein content – 11.96–12.45 g/100 g of food, which is 1.10–5.24% higher than in patties with traditional raw materials; with reduced fat content – by 15% compared to the test samples. The proposed formulations made it possible to increase the biological value of meat-containing chopped cutlets, namely to reduce the number of limiting amino acids from six to two. Replacing of pork and beef in duck meat and MPMO recipes had a positive effect on sensory evaluation of the products. The highest overall score was obtained from the recipe 1 containing 25% duck meat and 36% MPMO.

scholarly journals Regulating the functional and technological properties of mince dinghies by applying structural additives

2020 ◽  
Vol 82 (1) ◽  
pp. 151-156
Author(s):  
A. T. Vasyukova ◽  
D. A. Tikhonov ◽  
T. A. Tonapetyan ◽  
D. A. Kulikov
Keyword(s):  
Raw Materials ◽  
Control Sample ◽  
The Body ◽  
Wheat Bread ◽  
Experimental Sample ◽  
Technological Properties ◽  
Plant Materials ◽  
Biological Value ◽  
Microbiological Methods ◽  
Minced Meat

The basic information about the possibility of regulating the functional and technological properties of forcemeat systems from skinny ocean fish using fat-containing products, flavoring additives, structure-forming agents and functional food supplements is presented. This mutual addition of the recipe with various components allows you to create a combined special-purpose mincemeat and products based on it that best meet the needs of the body for nutritional and biological value. The purpose of the research is to regulate the functional and technological properties of forcemeat systems from skinny ocean fish using functional supplements. The objects of study in regulating the functional and technological properties of minced systems were pollock, cod, wheat bread from premium flour, butter extract of dried mushrooms, Provencal mayonnaise and Mobi-Lux Universal as a dietary supplement. Oil extracts of plant materials made it possible to stabilize the functional and technological properties of the raw materials, increase the biological value, and emphasize the organoleptic characteristics of the finished product. Nutritional supplements along with Mobi-Universal Universal enriched minced Ca, Fe and I, as well as vitamins, dietary fiber and protein. We used standard and generally accepted sensory, rheological, physicochemical and microbiological methods for studying raw materials, semi-finished products, and finished products. A comparative analysis of the chemical composition of raw materials with ocean fish was carried out to establish benefits. The high protein content in fish raw materials and Mobi-Lux Universal will help to structure the product, increase nutritional value, and adjust the structural and mechanical properties of minced systems. It was found that the WCS for the experimental sample of pollock minced meat reaches a maximum value of 75.9–77.1%, which is 3.5% higher than the WCS of the control sample; a similar tendency is observed for a sample of minced meat from cod - the WCL reaches 78.3–79.9%, which is 3.9% higher than the same indicator for the control sample. The PNS of minced meat containing pollock is almost 2 times higher than the value of this indicator in the control sample; for cod PNS is 25% higher than that of the control.

scholarly journals Development technology and sandement meat farsetos with dietary supplements

2020 ◽  
Vol 82 (1) ◽  
pp. 124-128
Author(s):  
A. T. Vasyukova ◽  
M. G. Makarov ◽  
R. A. Edvars ◽  
E. S. Mahmadaliev ◽  
M. E. Brazhnikov
Keyword(s):  
Dietary Supplements ◽  
Mass Fraction ◽  
Raw Materials ◽  
Meat Products ◽  
Rice Flour ◽  
The Body ◽  
Biological Value ◽  
Organoleptic Characteristics ◽  
Microbiological Methods ◽  
Minced Meat

The basic information on the functional properties of combined minced meat, developed on the basis of a combination of products of animal and vegetable origin, in one culinary product is presented. This mutual addition of the formulation with various components allows you to create a product that best meets the needs of the body according to nutritional value. The purpose of research is the development of technology and formulations of minced meat products with dietary supplements. The objects of study in the development of recipes and technology for minced meat products were: beef, beef and lamb; banana puree, rice flour, carrot and pumpkin powder as a dietary supplement. As a plasticizing additive used butter. The use of additives of plant origin allows you to stabilize the functional and technological properties of raw materials, increase biological value, emphasize the organoleptic characteristics of the finished product. Mashed potatoes, flour and powder are rich in minerals and vitamins, dietary fiber, proteins, polyunsaturated fatty acids. The rare chemical composition of the presented additives helps to improve the taste and increase the nutritional and biological value of the combined meat culinary products. We used standard and generally accepted sensory, rheological, physicochemical and microbiological methods for studying raw materials, semi-finished products, and finished products. Mathematical processing of the research results was carried out using the software package Curve Expert Ver. 1.34. The method of selecting components revealed promising combinations for enriching traditional formulations with plant components. Meat steamed meatballs have been developed both with the addition of vegetables (white cabbage, carrots and pumpkin), and without adding. The mass fraction of moisture of a steam crate with beef, lamb and cabbage is 12% higher than that of a steam cue with beef and pumpkin, and 10% more than a steam cue with beef and carrots. The mass fraction of fat in a chicken meat parrot with beef and pumpkin is 15% higher than that of a steam chicken with beef, lamb and cabbage and 4% than in a steam chicken with beef and carrots. The most corrected amino acid composition in meatballs of steam with beef and mutton.

scholarly journals PROSPECTS OF USE OF CRYSTOBILIZING PROTEIN-POLYSACCHARID COMPOSITION IN THE PRODUCTION OF MEAT CUTTED SEMI-FOODS

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
I. Shevchenko ◽  
G. Polishchuk ◽  
Ye. Kotliar ◽  
T. Osmak ◽  
A. Skochko
Keyword(s):  
Plasma Proteins ◽  
Raw Materials ◽  
Meat Products ◽  
Sodium Caseinate ◽  
Amorphous Structure ◽  
Organoleptic Characteristics ◽  
Duration Of Storage ◽  
Polysaccharide Composition ◽  
Minced Meat

One of the technological ways to improve the quality of frozen meat chopped semi-finished products is to use in their composition protein-polysaccharide composite mixtures, which mechanism of cryoprotective action is associated with the formation of amorphous structure of the product, reducing the number of crystallization centers and reducing the activity of water, which is especially important for long-term meat products storage at sub-zero temperatures. For this purpose, the composition of a protein-polysaccharide composition was developed consisting of blood plasma proteins, sodium caseinate, flax fiber and plantain in a ratio of 1:1:2:2. The regularities of the influence of the selected composition on the physicochemical properties of model minced meat systems have been established. The possibility of using this composition to eliminate the disadvantages of low-quality meat raw materials in the semi-finished meat products of  has been proved and to counteract the negative effects of their long-term storage in the frozen state. It has been found that the composite mixture of plasma proteins, sodium caseinate, fibers of linen and plantain in the amount of 3% reduces the cryoscopic temperature, decreases the mass fraction of frozen moisture by 1.7% and also reduces water activity by 0.031… 0.067, which helps to extend the shelf life of chopped semi-finished products. Based on the search for the extrema of the mathematical dependence of the amount of frozen water on the duration of storage of minced meat semi-finished products at a temperature of minus 10 ° C was established a rational content of the protein-polysaccharide composition (3%). This allows you to purposefully form and stabilize the specified functional-technological, structural-mechanical and organoleptic characteristics of the finished product. In order to develop recommendations on the use of the protein-polysaccharide composition as a cryoprotectant, the chemical composition and functional-technological properties (FCS) of model minced meat systems with different levels of its use were studied. The technological feasibility of using protein-polysaccharide composition in the amount of 3%, which is an effective cryoprotectant in meat minced systems during low-temperature processing has been proved.

scholarly journals RESEARCH INTO MECHANICAL PROPERTIES OF MINCED MEAT AND FINISHED PRODUCTS

2017 ◽  
Vol 4 ◽  
pp. 43-51
Author(s):  
Yuriy Suсhenko ◽  
Vladislav Suсhenko ◽  
Mikhail Mushtruk ◽  
Vladimir Vasyliv ◽  
Yuriy Boyko
Keyword(s):  
Mechanical Properties ◽  
Mechanical Characteristics ◽  
Raw Materials ◽  
Meat Products ◽  
Tissue Fluid ◽  
Strained State ◽  
Inorganic Substances ◽  
Minced Meat ◽  
Cutting Mechanisms

Studies were conducted of the stressed-strained state of biopolymers of meat, which were exposed to the processes of elastic, residual and highly elastic deformation at cutting and mincing. Analysis of the structure of this natural biopolymer and the evaluation of mechanical characteristics of meat under normal and low temperatures are important factors that are taken into account for the rational selection of meat mincing machines and tools in the production of meat products, minced meat, semi-finished and sausage products. The structure of meat is a system of structured protein fibers, impregnated with tissue fluid, which is protein sol that contains organic and inorganic substances, soluble in it. The tissues that the meat is composed of belong to natural biopolymers, so conducting analytical studies into mechanical properties of meat within the framework of our understanding of the mechanics of polymers will make it possible to improve mincing processes, employed during manufacturing of meat products. In order to prevent meat overheating, the mincing process is performed at several stages. For example, in cutting mechanisms of choppers, they use a row of knives and grids with holes, diameter of which gradually changes from the original size of0.06 mto 0.003-0.002 min the outlet grids. Quality indicators of the finished products are affected by mechanical characteristics of raw materials and the way the cutting process is carried out. In the course of conducted analysis it was found that in modern food production there remain unresolved important problems, which address current issues, related to rheological and structural mechanical properties of meat raw material. First of all, it concerns theoretical and practical developments that enhance an understanding of physico-chemical and mechanical properties of raw materials, which will make it possible to develop theoretical foundations and experimentally substantiate the new conceptual approach to solving the task of improving the quality of semi-finished products and durability of equipment at meat processing enterprises of APC. The research is the basis for constructive and technological solutions, choice of mode, kinematic and dynamic parameters of cutting devices, steel and wear resistant coatings for cutting tools that provide saving of energy and materials at meat mincing, high quality of minced meat. and finished products and appropriate service life of the equipment. It was established that in order to determine characteristics of the strained state of meat, it is necessary to apply a circular diagram of loading-unloading, which allows analysis of behavior of the sample in a closed cycle of changing in external load. An analysis indicates a very large dependence of meat elasticity module on temperature. Dependences of this kind are generally characteristic of polymer bodies.

Sign in / Sign up

Export Citation Format

Share Document