scholarly journals Influence of Non-commercial Fuel Supply Systems on Small Engine SI Exhaust Emissions in Terms of European Approval Regulations

2021 ◽  
Author(s):  
Łukasz Warguła ◽  
Piotr Lijewski ◽  
Mateusz Kukla
Keyword(s):  
Power System ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Operating Conditions ◽  
Combustion Engines ◽  
Spark Ignition Engines ◽  
Hc Emissions ◽  
Electronic Injection ◽  
Supply Systems ◽  
European Approval

Abstract The development and operation of road infrastructure requires machines and equipment driven by low-powered internal combustion engines. The authors of this paper examined five small spark-ignition engines. They used the most popular commercial design on the market, the Lifan GX 390, with a carburettor power system, and another commercial power unit with the most innovative power system, the Honda iGX 390, characterised by an electronically controlled carburettor flap. The remaining three tested constructions are proprietary solutions modernising the design of the Lifan GX 390 engine. The first is the application of an electronic injection and ignition system powered by gasoline, the second and third are systems powered by alternative fuels. Emissions tests were conducted under identical operating conditions on an engine dynamometer coinciding with European Union guidelines (Regulation 2016/1628/EU).The results of the tests showed that innovative solutions in most cases reduced CO,CO2, and HC emissions while increasing NOx compounds.

scholarly journals Influence of the Use of Liquefied Petroleum Gas (LPG) Systems in Woodchippers Powered by Small Engines on Exhaust Emissions and Operating Costs

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5773 ◽  
Author(s):  
Łukasz Warguła ◽  
Mateusz Kukla ◽  
Piotr Lijewski ◽  
Michał Dobrzyński ◽  
Filip Markiewicz
Keyword(s):  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Negative Impact ◽  
Internal Combustion ◽  
Pollutant Emissions ◽  
Combustion Engines ◽  
The European Union ◽  
Liquefied Petroleum Gas ◽  
Hc Emissions ◽  
Supply Systems

The use of alternative fuels is a contemporary trend in science aimed at the protection of non-renewable resources, reducing the negative impact on people and reducing the negative impact on the natural environment. Liquefied petroleum gas (LPG) is an alternative fuel within the meaning of the European Union Directive (2014/94/UE), as it is an alternative for energy sources derived from crude oil. The use of LPG fuel in low-power internal combustion engines is one of the currently developed scientific research directions. It results from the possibility of limiting air pollutant emissions compared to the commonly used gasoline and the lower cost of this fuel in many countries. By “gasoline 95” the Authors mean non-lead petrol as a flammable liquid that is used primarily as a fuel in most spark-ignited internal combustion engines, whereas 95 is an octane rating (octane number). This article presents the results of research on fuel consumption, toxic exhaust gas emission, and operating costs of a woodchipper used for shredding branches with a diameter of up to 100 mm in real working conditions. The woodchipper, powered by a 9.5 kW internal combustion engine, fueled by gasoline and LPG was tested. Liberal regulations of the European Union (Regulation 2016/1628/EU) on the emission of harmful exhaust compounds from small spark-ignition engines (up to 19 kW) and non-road applications contribute to the low technical advancement level of these engines. The authors researched a relatively simple and cheap LPG fueling system, as in their opinion, such a system has the best chance of being implemented for use. In the study, the branches of cherry plum were shredded (Prunus cerasiferaEhrh. Beitr. Naturk. 4:17. 1789 (Gartenkalender4:189-204. 1784)). Their diameter was ca. 80 mm, length 3 m, and moisture content ca. 25%. The system was tested during the shredding of the branches in real working conditions (the frequency of supplying the branches about 4 min−1 and the mass productivity of about 0.73 t/h). Based on the recorded results, it was found that the LPG fueled engine was characterized by higher carbon monoxide (CO) and nitrogen oxides (NOx) emissions by 22% and 27%, respectively. A positive effect of using LPG was the reduction of fuel consumption by 28% and carbon dioxide (CO2) and hydrocarbons (HC) emissions by 37% and 83%, respectively. The results of the research show that the use of alternative fuels can bring benefits in terms of CO2 and HC emissions, but at the same time be characterized by an increase in CO and NOx emissions. Further research should be conducted on innovative alternative fuel supply systems, such as in the automotive industry. At the same time, legislators should limit the use of low-quality fuel supply systems with the limits of pollutant emissions in exhaust gases, contributing to the development and economic competitiveness of new fuel injection systems.

scholarly journals Dual fuelling SI engine with alcohol and gasoline

2011 ◽  
Vol 145 (2) ◽  
pp. 73-81
Author(s):  
Jerzy LARISCH ◽  
Zdzisław STELMASIAK
Keyword(s):  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Thermal State ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Intake Manifold ◽  
Combustion Engines ◽  
Mixing Chamber ◽  
Si Engines ◽  
Dual Fueling

The Department of Internal Combustion Engines and Vehicles, Technical University of Bielsko-Biala has carried out work on alternative fuels in the area of dual-fueling of SI engines. The paper presents the concept of dual fuel (alcohol and gasoline) MPI injected spark-ignition engine using a fuel mixing device. The solution consists in mixing the fuel (gasoline and alcohol) before or in the fuel rail, which ensures a variable share of alcohol in the mixture in the range from 0÷100%, depending on the engine operating conditions (engine revolutions and load), and its thermal state. The fuels are delivered to the mixing chamber through the solenoid valves that allow a proper selection of the proportion of alcohol and gasoline. The pre-prepared mixture is injected through the original injectors to the intake manifold, around the intake valve. This paper presents the prototype of the mixer that allows mixing of the gasoline and alcohol in any proportion using a PWM.

Theoretical and Experimental Analysis on Use of Alternative Fuels for Internal Combustion Engines

2014 ◽  
Vol 659 ◽  
pp. 274-279
Author(s):  
Krisztina Uzuneanu ◽  
Burciu Burciu
Keyword(s):  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Energy Resources ◽  
Combustion Engines ◽  
Spark Ignition Engines ◽  
Modern Culture ◽  
Natural Energy ◽  
World Energy ◽  
The World ◽  
Rape Oil

The drastic decrease in the world energy resources along with the statement that the modern culture and civilization simply cannot exist without energy and therefore, due to its very existence, it is a big energy consumer, has become an axiom. The increasing number of inhabitants on the planet and consequently the increased amount of necessary energy has determined the researchers and scientists to search deeper into other possible sources of natural energy such as: wind, sun, water, geothermal, tides, atom energies. The work presents some characteristics of injection and burning of the rape oil for Diesel engines and the mixtures of ethanol with gasoline for spark ignition engines.

scholarly journals Compatibility of Different Automotive Elastomers in Paraffinic Diesel Fuel

2021 ◽  
Vol 11 (23) ◽  
pp. 11312
Author(s):  
Tomasz Białecki ◽  
Andrzej Sitkiewicz ◽  
Bolesław Giemza ◽  
Jarosław Sarnecki ◽  
Marta Skolniak ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Methyl Esters ◽  
Protective Layer ◽  
Butadiene Rubber ◽  
Combustion Engines ◽  
Fisher Tropsch Synthesis ◽  
Supply Systems

The introduction of new fuels to power internal combustion engines requires testing the compatibility of such fuels with materials commonly used in fuel supply systems. This paper investigates the influence of alternative fuels on the acrylonitrile-butadiene rubber and fluoroelastomer used in the automotive industry. In the study, conventional diesel fuel, its blend with 7% of fatty acid methyl esters and paraffinic diesel fuel produced with the Fisher Tropsch synthesis from natural gas were interacted with the elastomers. The immersion tests were carried out at room temperature (20 °C) for 168 h. The effect was evaluated based on changes in the selected rubber’s volume, mass and hardness. It has been confirmed that the synthetic component without aromatic hydrocarbons had a different effect on the tested rubber than did conventional fuel. In follow-up work, the selected rubbers were also subjected to microscopic observation. The most frequently observed effect was the washing out of the seal protective layer.

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

scholarly journals Impact of Blow-By Gas and Endgap Ring Position on the Variations of Particle Emissions in Gasoline Engines

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7492
Author(s):  
Vincent Berthome ◽  
David Chalet ◽  
Jean-François Hetet
Keyword(s):  
Internal Combustion Engines ◽  
Particulate Emissions ◽  
Combustion Engines ◽  
Spark Ignition Engines ◽  
Particulate Emission ◽  
Particle Emissions ◽  
Gasoline Engines ◽  
System A ◽  
The Impact ◽  
Ring Position

Particulate emission from internal combustion engines is a complex phenomenon that needs to be understood in order to identify its main factors. To this end, it appears necessary to study the impact of unburned gases, called blow-by gases, which are reinjected into the engine intake system. A series of transient tests demonstrate their significant contribution since the particle emissions of spark-ignition engines are 1.5 times higher than those of an engine without blow-by with a standard deviation 1.5 times greater. After analysis, it is found that the decanter is not effective enough to remove completely the oil from the gases. Tests without blow-by gases also have the advantage of having a lower disparity, and therefore of being more repeatable. It appears that the position of the “endgap” formed by the first two rings has a significant impact on the amount of oil transported towards the combustion chamber by the backflow, and consequently on the variation of particle emissions. For this engine and for this transient, 57% of the particulate emissions are related to the equivalence ratio, while 31% are directly related to the ability of the decanter to remove the oil of the blowby gases and 12% of the emissions come from the backflow. The novelty of this work is to relate the particles fluctuation to the position of the endgap ring.

scholarly journals The influence of centrial forces on crankshaft bearing lubrication is in emergency modes of the engine of the car

2021 ◽  
Vol 12 (2) ◽  
pp. 112-121
Author(s):  
Oleksandr Khrulev ◽  
◽  
Olexii Saraiev ◽  
Iryna Saraieva ◽  
◽  
...  
Keyword(s):  
Internal Combustion Engines ◽  
Operating Mode ◽  
Internal Combustion ◽  
Technical Condition ◽  
Operating Conditions ◽  
Combustion Engines ◽  
Connecting Rod ◽  
Oil Supply ◽  
Technical Expert ◽  
The Difference

The analysis of the crankshaft bearing condition of the automotive internal combustion engines in the case of insufficiency and breakage of oil supply to them is carried out. It is noted that this fault is one of the most common causes of damage to rubbing pairs in operation. At the same time, the different groups of bearings are often damaged, which cannot be explained within the framework of existing models of plain bearing lubrication. The objective of the work is to develop a mathematical model of oil supply to connecting rod bearings in emergency mode, taking into account the characteristic features of the bearing design. The model also, depending on the nature of the damage, should help to determine and explain the causes of bearing failures if they occur in different modes when operating conditions are broken. A computational model has been developed that makes it possible to assess the effect of design differences in the features of oil supply and the action of the centrifugal forces during crankshaft rotation on the oil column in the lubrication hole where oil is supplied to the conrod bearing. Calculations of the change in time of the oil supply pressure to the connecting rod bearings for the various designs of the crankshaft lubrication holes have been performed. It is shown that, depending on the operating mode of the engine and its design, the oil pressure in front of the connecting rod bearings does not disappear immediately after oil supply failure to crankshaft. Moreover, the lower the crankshaft speed is, the longer the lubrication of the conrod bearings will continue. The calculation results are confirmed by the data of the expert studies of the engine technical condition, in which the crankshaft was wedged in the damaged main bearings was found in the absence of serious damage to the connecting rod ones. It has been found that such features of the damage correspond to an rapid breakage of the oil supply to the crankshaft in the case of such operational damage as the oil pump and pressure reducing valve failure, the oil filter seal and oil pan destruction, etc. The developed model explains the difference in lubrication conditions and in the damage feature to the main and connecting rod bearings in the emergency cases of the oil supply breakage, which are observed during operation, and helps to clarify the failure causes. This makes it possible to use the model and the obtained data when providing auto technical expert studies of the failure causes of automobile internal combustion engines This makes it possible to use the model and the obtained data when providing auto technical expert studies of the failure causes of automobile internal combustion engines when the operating conditions are broken.

Compressor Design for Multi-Point Operating Conditions of Turbocharged Gasoline Engines

2010 ◽  
Author(s):  
Tao Chen ◽  
Yangjun Zhang ◽  
Xinqian Zheng ◽  
Weilin Zhuge
Keyword(s):  
Internal Combustion Engines ◽  
Gasoline Engine ◽  
Design Method ◽  
Pressure Ratio ◽  
Operating Conditions ◽  
Combustion Engines ◽  
Gasoline Engines ◽  
Compressor Design ◽  
Operating Points ◽  
Load Conditions

Turbocharger compressor design is a major challenge for performance improvement of turbocharged internal combustion engines. This paper presents a multi-point design methodology for turbocharger centrifugal compressors. In this approach, several design operating condition points of turbocharger compressor are considered according to total engine system requirements, instead of one single operating point for traditional design method. Different compressor geometric parameters are selected and investigated at multi-point operating conditions for the flow-solutions of different design objectives. The method has been applied with success to a small centrifugal compressor design of a turbocharged gasoline engine. The results show that the consideration of several operating points is essential to improve the aerodynamic behavior for the whole working range. The isentropic efficiency has been increased by more than 5% at part-load conditions while maintaining the pressure ratio and flow range at full-load conditions of the gasoline engine.

scholarly journals The use of thermography in the diagnosis of ship piston internal combustion engines

2018 ◽  
Vol 182 ◽  
pp. 01027
Author(s):  
Jan Monieta
Keyword(s):  
Infrared Thermography ◽  
Internal Combustion Engines ◽  
Experimental Studies ◽  
Internal Combustion ◽  
Technical Condition ◽  
Operating Conditions ◽  
Combustion Engines ◽  
Destructive Testing ◽  
Fault State ◽  
Floating Objects

The intensity of infrared radiation emitted by objects depends mainly on their temperature. One of the diagnostic signals may be the temperature field. In infrared thermography, this quantity is used as an indicator of the technical condition of marine objects. The article presents an overview of the use of infrared thermography for the diagnosis mainly of marine piston floating objects and various types of reciprocating internal combustion engines as well as examples of own research results. A general introduction to infrared thermography and common procedures for temperature measurement and non-destructive testing are presented. Experimental research was carried out both in laboratory conditions and in the operating conditions of sea-going vessels. Experimental studies consisted of the presentation of photographs of the same objects made in visible light and the use of infrared thermography. The same objects were also compared, but for different cylinders of the tested internal combustion engines as well as for the up state and fault state. The characteristics of the temperature values at selected points were taken depending on the engine load along with the approximation mathematical models of these dependencies.

Sign in / Sign up

Export Citation Format

Share Document