scholarly journals Impact of Ultraviolet-blocking Plastic Films on Insect Vectors of Virus Diseases Infesting Crisp Lettuce

HortScience ◽  
2006 ◽  
Vol 41 (3) ◽  
pp. 711-716 ◽  
Author(s):  
Beatriz M. Díaz ◽  
Ricardo Biurrún ◽  
Aránzazu Moreno ◽  
Miguel Nebreda ◽  
Alberto Fereres
Keyword(s):  
Population Density ◽  
Macrosiphum Euphorbiae ◽  
Effective Control ◽  
Insect Vectors ◽  
Plastic Film ◽  
Virus Diseases ◽  
Greenhouse Whitefly ◽  
Plastic Films ◽  
Transmitted Virus ◽  
The Impact

Ultraviolet (UV)-absorbing plastic films are being used as a photoselective barrier to control insect vectors and associated virus diseases in different horticultural crops. A 2-year experiment was carried out in northeastern Spain (Navarra) to evaluate the impact of a UV-blocking film (AD-IR AV) on the population density of insect pests and the spread of insect-transmitted virus diseases associated with head lettuce [Lactuca sativa (L.)]. Results showed that the UV-absorbing plastic film did not loose its ability to filter UV radiation after three lettuce crop cycles (14 months). The UV-absorbing plastic film was effective in reducing the abundance and in delaying the colonization of lettuce by aphids [Macrosiphum euphorbiae (Thomas) and Acyrthosiphum lactucae (Passerini)]. A significant increase in the percentage of marketable plants was achieved under UV-absorbing films due to a reduction in the number of plants infested by aphids and by insect-transmitted virus diseases (mainly potyviruses). Also the UV-absorbing plastic films were effective in reducing the population density of Frankliniella occidentalis (Pergande) and the spread of tomato spotted wilt virus (TSWV) as well as the population density of the lepidopteran pest, Autographa gamma (L.), a common pest of lettuce in Spain. However, no effective control of the greenhouse whitefly Trialeurodes vaporariorum (Westwood) was achieved. The results showed that UV-absorbing plastic films are a very promising tool to protect greenhouse lettuce from the main pests and insect-transmitted virus diseases occurring in northeastern Spain.

scholarly journals Impacts of Plastic Filming on Growth Environment, Yield Parameters and Quality Attributes of Lettuce

2018 ◽  
Vol 10 (4) ◽  
pp. 522-529
Author(s):  
Mohammad SHAH JAHAN ◽  
Dulal Md. SARKAR ◽  
Rajesh CHAKRABORTY ◽  
Abul Hasnat MUHAMMAD SOLAIMAN ◽  
Asma AKTER ◽  
...  
Keyword(s):  
Soil Ph ◽  
Nutritive Value ◽  
Plant Production ◽  
Plastic Film ◽  
Black Film ◽  
Growth Environment ◽  
Plastic Films ◽  
Yield Parameters ◽  
Overall Performance ◽  
The Impact

The condition of soil and microclimate are prerequisite for proper growth and development of a plant. The environment may be mediated by artificial filming with different colored polyethylene. The mechanism of lettuce growing under colored plastic film remains largely unknown. Thus, to investigate the impact of different plastic film on the growth environment, yield parameters and phytochemical properties of lettuce, the present study was performed. Five different colored polyethylene films viz. black, white, blue, olive and silver were used as a treatment factor, in filed condition. The results demonstrated that the soil pH, temperature and overall performance of lettuce, as well as the phytochemical composition, varied within the use of different films. The maximum soil pH and temperature were found under black filming plots. Additionally, the black colored plastic film exhibited the best values for most of the yield parameters studied over other plastic films, whereas the field with non-plastic film condition showed the worst data in the experiment. Phytochemical concentrations and nutritive value of lettuce were also significantly affected by the colored plastic treatments. Furthermore, the chlorophyll, anthocyanin, phenols and carotenoids contents were increased in plants grown in soil covered with black polyethylene. Vitamin C content was of 2.5 fold higher in the plants grown in the black film compared to control conditions. The application of plastic film led to elevated concentrations of macro and micronutrients in lettuce because of the direct effect of modified radiation under the plastic film. Taken together, it can be concluded that plastic filming could be used to enhance the yield and nutritional status of lettuce in natural plant production facilities.

Characterizing the effectiveness of COVID-19 mitigation measures: A data-centric approach (Preprint)

2020 ◽  
Author(s):  
Lukman Olagoke ◽  
Ahmet E. Topcu
Keyword(s):  
Control Measure ◽  
Control Measures ◽  
World Health ◽  
Mitigation Measures ◽  
Effective Control ◽  
The World ◽  
Decision Making Processes ◽  
And Performance ◽  
Health Organization ◽  
The Impact

BACKGROUND COVID-19 represents a serious threat to both national health and economic systems. To curb this pandemic, the World Health Organization (WHO) issued a series of COVID-19 public safety guidelines. Different countries around the world initiated different measures in line with the WHO guidelines to mitigate and investigate the spread of COVID-19 in their territories. OBJECTIVE The aim of this paper is to quantitatively evaluate the effectiveness of these control measures using a data-centric approach. METHODS We begin with a simple text analysis of coronavirus-related articles and show that reports on similar outbreaks in the past strongly proposed similar control measures. This reaffirms the fact that these control measures are in order. Subsequently, we propose a simple performance statistic that quantifies general performance and performance under the different measures that were initiated. A density based clustering of based on performance statistic was carried out to group countries based on performance. RESULTS The performance statistic helps evaluate quantitatively the impact of COVID-19 control measures. Countries tend show variability in performance under different control measures. The performance statistic has negative correlation with cases of death which is a useful characteristics for COVID-19 control measure performance analysis. A web-based time-line visualization that enables comparison of performances and cases across continents and subregions is presented. CONCLUSIONS The performance metric is relevant for the analysis of the impact of COVID-19 control measures. This can help caregivers and policymakers identify effective control measures and reduce cases of death due to COVID-19. The interactive web visualizer provides easily digested and quick feedback to augment decision-making processes in the COVID-19 response measures evaluation. CLINICALTRIAL Not Applicable

scholarly journals The Impact of Health Policies and Sociodemographic Factors on Doubling Time of the COVID-19 Pandemic in Mexico

2021 ◽  
Vol 18 (5) ◽  
pp. 2354
Author(s):  
Lina Díaz-Castro ◽  
Héctor Cabello-Rangel ◽  
Kurt Hoffman
Keyword(s):  
Population Density ◽  
Doubling Time ◽  
Sociodemographic Factors ◽  
Health Policies ◽  
Government Response ◽  
University Of Oxford ◽  
Negative Effect ◽  
Population Sizes ◽  
The University ◽  
The Impact

Background. The doubling time is the best indicator of the course of the current COVID-19 pandemic. The aim of the present investigation was to determine the impact of policies and several sociodemographic factors on the COVID-19 doubling time in Mexico. Methods. A retrospective longitudinal study was carried out across March–August, 2020. Policies issued by each of the 32 Mexican states during each week of this period were classified according to the University of Oxford Coronavirus Government Response Tracker (OxCGRT), and the doubling time of COVID-19 cases was calculated. Additionally, variables such as population size and density, poverty and mobility were included. A panel data model was applied to measure the effect of these variables on doubling time. Results. States with larger population sizes issued a larger number of policies. Delay in the issuance of policies was associated with accelerated propagation. The policy index (coefficient 0.60, p < 0.01) and the income per capita (coefficient 3.36, p < 0.01) had a positive effect on doubling time; by contrast, the population density (coefficient −0.012, p < 0.05), the mobility in parks (coefficient −1.10, p < 0.01) and the residential mobility (coefficient −4.14, p < 0.01) had a negative effect. Conclusions. Health policies had an effect on slowing the pandemic’s propagation, but population density and mobility played a fundamental role. Therefore, it is necessary to implement policies that consider these variables.

scholarly journals Research on the Economic Development Threshold Effect of the Employment Density of the Shanghai Consumer Goods Industry in the Context of New Manufacturing, Based on the Experience Comparison with International Metropolis

Mathematics ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 969
Author(s):  
Lei Shen ◽  
Xi Zhang ◽  
Hongda Liu ◽  
Pinbo Yao
Keyword(s):  
Economic Development ◽  
Population Density ◽  
Consumer Goods ◽  
Inflection Point ◽  
Growth Potential ◽  
Positive Trend ◽  
Employment Density ◽  
Consumer Goods Industry ◽  
The Impact ◽  
Development Threshold

With the rise of a new generation of technology and industrial changes, the service-oriented manufacturing industry has become the direction of future development. With the background of new manufacturing, this paper constructs an economic development threshold model of employment density of consumer goods industry based on data from Shanghai and Tokyo from 2007 to 2016, and empirically analyzes the impact of the employment density of the consumer goods industry on urban economic development under different population densities. At the same time, by comparing the experience of Tokyo, the development status and prospects of Shanghai’s consumer goods industry are explored. The study found that the threshold of Tokyo’s consumer goods industry is 0.608. When population density is lower than this threshold, the consumer goods industry continues to promote the economic development of Tokyo; however, when the population density is higher than this threshold, the consumer goods industry begins to inhibit the economic development of Tokyo. The Shanghai consumer goods industry threshold is 0.329. Under the threshold, most of the consumer goods industry contributions to the economy are negative, but above the threshold, they begin to show a positive trend. The inflection point of the effect curve of Tokyo’s consumer goods industry on economic development has appeared, but the inflection point of Shanghai’s consumer goods industry has not yet appeared. Compared with Tokyo, the economic vitality of Shanghai’s consumer goods industry has not yet been fully released. With the continued increase of population density in Shanghai, the growth potential of the consumer goods industry is huge, and it is expected to reshape the flourishing age of Shanghai’s light industry brand.

scholarly journals Nitrate-dominated PM<sub>2.5</sub> and elevation of particle pH observed in urban Beijing during the winter of 2017

2020 ◽  
Vol 20 (8) ◽  
pp. 5019-5033 ◽  
Author(s):  
Yuning Xie ◽  
Gehui Wang ◽  
Xinpei Wang ◽  
Jianmin Chen ◽  
Yubao Chen ◽  
...  
Keyword(s):  
Atmospheric Aerosols ◽  
Ammonia Concentration ◽  
Historical Record ◽  
Molar Ratio ◽  
Effective Control ◽  
Nitrate Content ◽  
Chinese Government ◽  
Low Level ◽  
The Impact ◽  
Pollution Episodes

Abstract. The Chinese government has exerted strict emission controls to mitigate air pollution since 2013, which has resulted in significant decreases in the concentrations of air pollutants such as SO2. Strict pollution control actions also reduced the average PM2.5 concentration to the low level of 39.7 µg m−3 in urban Beijing during the winter of 2017. To investigate the impact of such changes on the physiochemical properties of atmospheric aerosols in China, we conducted a comprehensive observation focusing on PM2.5 in Beijing during the winter of 2017. Compared with the historical record (2014–2017), SO2 decreased to the low level of 3.2 ppbv in the winter of 2017, but the NO2 level was still high (21.4 ppbv in the winter of 2017). Accordingly, the contribution of nitrate (23.0 µg m−3) to PM2.5 far exceeded that of sulfate (13.1 µg m−3) during the pollution episodes, resulting in a significant increase in the nitrate-to-sulfate molar ratio. The thermodynamic model (ISORROPIA II) calculation results showed that during the PM2.5 pollution episodes particle pH increased from 4.4 (moderate acidic) to 5.4 (more neutralized) when the molar ratio of nitrate to sulfate increased from 1 to 5, indicating that aerosols were more neutralized as the nitrate content elevated. Controlled variable tests showed that the pH elevation should be attributed to nitrate fraction increase other than crustal ion and ammonia concentration increases. Based on the results of sensitivity tests, future prediction for the particle acidity change was discussed. We found that nitrate-rich particles in Beijing at low and moderate humid conditions (RH: 20 %–50 %) can absorb twice the amount of water that sulfate-rich particles can, and the nitrate and ammonia with higher levels have synergetic effects, rapidly elevating particle pH to merely neutral (above 5.6). As moderate haze events might occur more frequently under abundant ammonia and nitrate-dominated PM2.5 conditions, the major chemical processes during haze events and the control target should be re-evaluated to obtain the most effective control strategy.

scholarly journals Understanding drivers of wild oyster population persistence

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mickael Teixeira Alves ◽  
Nick G. H. Taylor ◽  
Hannah J. Tidbury
Keyword(s):  
Population Density ◽  
Carrying Capacity ◽  
Pacific Oyster ◽  
Wild Population ◽  
Population Persistence ◽  
Oyster Reefs ◽  
Oyster Population ◽  
Northern European ◽  
Age Structured ◽  
The Impact

AbstractPersistence of wild Pacific oyster, Magallana gigas, also known as Crassostrea gigas, has been increasingly reported across Northern European waters in recent years. While reproduction is inhibited by cold waters, recent warm summer temperature has increased the frequency of spawning events. Although correlation between the increasing abundance of Pacific oyster reefs in Northern European waters and climate change is documented, persistence of wild populations may also be influenced by external recruitment from farmed populations and other wild oyster populations, as well as on competition for resources with aquaculture sites. Our understanding of the combined impact of the spawning frequency, external recruitment, and competition on wild population persistence is limited. This study applied an age-structured model, based on ordinary differential equations, to describe an oyster population under discrete temperature-related dynamics. The impact of more frequent spawning events, external recruitment, and changes in carrying capacity on Pacific oyster density were simulated and compared under theoretical scenarios and two case studies in Southern England. Results indicate that long term persistence of wild oyster populations towards carrying capacity requires a high frequency of spawning events but that in the absence of spawning, external recruitment from farmed populations and other wild oyster populations may act to prevent extinction and increase population density. However, external recruitment sources may be in competition with the wild population so that external recruitment is associated with a reduction in wild population density. The implications of model results are discussed in the context of wild oyster population management.

scholarly journals The use of light spectrum blocking films to reduce populations of Drosophila suzukii Matsumura in fruit crops

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Michelle T. Fountain ◽  
Amir Badiee ◽  
Sebastian Hemer ◽  
Alvaro Delgado ◽  
Michael Mangan ◽  
...  
Keyword(s):  
Control Strategies ◽  
Field Trials ◽  
Biological Data ◽  
Insect Vision ◽  
Invasive Pest ◽  
Effective Control ◽  
Fruit Crops ◽  
Light Spectrum ◽  
Drosophila Suzukii ◽  
The Impact

Abstract Spotted wing drosophila, Drosophila suzukii, is a serious invasive pest impacting the production of multiple fruit crops, including soft and stone fruits such as strawberries, raspberries and cherries. Effective control is challenging and reliant on integrated pest management which includes the use of an ever decreasing number of approved insecticides. New means to reduce the impact of this pest that can be integrated into control strategies are urgently required. In many production regions, including the UK, soft fruit are typically grown inside tunnels clad with polyethylene based materials. These can be modified to filter specific wavebands of light. We investigated whether targeted spectral modifications to cladding materials that disrupt insect vision could reduce the incidence of D. suzukii. We present a novel approach that starts from a neuroscientific investigation of insect sensory systems and ends with infield testing of new cladding materials inspired by the biological data. We show D. suzukii are predominantly sensitive to wavelengths below 405 nm (ultraviolet) and above 565 nm (orange & red) and that targeted blocking of lower wavebands (up to 430 nm) using light restricting materials reduces pest populations up to 73% in field trials.

scholarly journals Ultraviolet Transparency of Plastic Films Determines the Quality of Lettuce (Lactuca sativa L.) Grown in a Greenhouse

Agronomy ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 358
Author(s):  
Deissy Giovanna Quintero-Arias ◽  
John Fabio Acuña-Caita ◽  
Carlos Asensio ◽  
Juan Luis Valenzuela
Keyword(s):  
Ultraviolet Radiation ◽  
High Altitude ◽  
Dry Weight ◽  
Yield Component ◽  
Plastic Film ◽  
Area Index ◽  
Plastic Films ◽  
High Solar Radiation ◽  
Cycle Growth

The quality of red lettuce is based on the content of anthocyanin pigments, and the content of these pigments increases when the plant receives ultraviolet radiation. Lettuce crops are increasingly being grown in greenhouses to provide better quality fresh lettuce; however, both quality and productivity are affected by the type of cover used. The effects of UV-transparent and UV-blocking plastic films on the growth and quality of three lettuce cultivars (‘Casabella’ and ‘Vera’, which are both green leaf, and ‘Lollo Rosso’, which is red leaf) were investigated. The crop was cultivated at an altitude of 2576 m a.s.l. to naturally expose it to high ultraviolet radiation. The height and diameter of plants, fresh and dry weight, leaf area index, chlorophyll fluorescence, and leaf colour were determined throughout the crop cycle. Growth characteristics were not significantly influenced by the plastic film in all cultivars, probably due to the high altitude and the high solar radiation received. The UV-transparent film could increase the red colour in ‘Lollo Rosso’, and a higher commercial quality was achieved. No effect of the plastic film on the yield component was observed in the ‘Casabella’ and ‘Vera’ cultivars. The findings of this study provide guidance on what cultivar and plastic film must be used in high-altitude areas where the solar and UV radiation is high.

Sign in / Sign up

Export Citation Format

Share Document