scholarly journals Accumulation of the Components of Total Solids in Ripening Fruits of Tomato

1993 ◽  
Vol 118 (2) ◽  
pp. 286-292 ◽  
Author(s):  
T.E. Young ◽  
J.A. Juvik ◽  
J.G. Sullivan
Keyword(s):  
Dry Matter ◽  
Chemical Constituents ◽  
Tomato Fruit ◽  
Physiological Age ◽  
Total Solids ◽  
Residual Variation ◽  
Solids Concentration ◽  
Fruit Samples ◽  
Ripe Stage ◽  
Days After Anthesis

To identify qualitative and quantitative chemical variation in tomato fruit dry matter, crosses were made between the high soluble solids concentration (SSC) line LA 1501 (6.3% SSC when red-ripe) and the nearly isogenic commercial tomato cultivar VF 145B-7879 with a lower SSC (4.4% when red-ripe). Fruit samples from the parents and the reciprocal F1 hybrids were collected at 3-day intervals, from 25 to 52 days after anthesis, to evaluate the accumulation of various quality components throughout the development of the fruit from immature-green to red-ripe stage. Fructose and glucose concentrations, titratable acidity, pH, and percent dry weight (pulp and serum) were determined for each sample on a fresh basis. Fruit maturity was evaluated by puree color using Hunter `a' colorimeter values. Changes in most of the chemical constituents of the fruit were found to regress linearly with changes in fruit color. Regression of puree color against fruit SSC, and fructose, glucose, and total sugar concentrations described more of the observed variability in these components than days after anthesis, indicating that Hunter `a' colorimetric values provide a more precise measurement of fruit physiological age. The variation between the parents in fruit dry matter was found to be primarily due to differences in SSC. The ratio of fruit soluble to total solids concentration increased 23.7% in LA 1501 (from 61.6% to 85.3%) throughout ripening compared to-an increase of only 8.9% (from 66.3% to 75.2%) in `VF 145B-7879'. At the red ripe stage, LA 1501 possessed a 44% higher SSC than `VF 145B-7879'. Differences in fructose and glucose accounted for 41% of the variation in SSC between the two lines. An unidentified component(s) was responsible for the residual variation. Application of the genetic and physiological information generated from this study can be used to isolate and select for genes controlling accumulation of tomato fruit dry matter.

Use of Lycopersicon cheesmanii and L. chmielewskii to increase dry matter content of tomato fruit

1993 ◽  
Vol 73 (1) ◽  
pp. 273-279 ◽  
Author(s):  
V. Poysa
Keyword(s):  
Lycopersicon Esculentum ◽  
Dry Matter ◽  
Tomato Fruit ◽  
Fruit Size ◽  
Fruit Yield ◽  
Soluble Solids ◽  
High Yield ◽  
Dry Matter Content ◽  
Total Solids ◽  
Solids Content

Advanced lines and backcrosses from interspecific hybridization of processing tomato (Lycopersicon esculentum Mill.) with six L. chmielewskii (Rick, Kesicki, Fobes and Holle) and L. cheesmanii (Riley) accessions were evaluated in the field over 2 yr for soluble solids content (SSC), total solids content (TSC), fruit yield and fruit size to determine the effectiveness of combining elevated solids levels with high fruit yield and size following early generation selection. More than a quarter of the lines had significantly higher SSC levels than the recurrent tomato parent, Purdue 812 (P812). Several lines combined high SSC and TSC with high fruit yield and large fruit size to produce more dry matter yield per hectare or per fruit than P812. Two backcrosses were optimal for combining high SSC and high yield. SSC and TSC were negatively correlated with fruit size and, to a lesser degree, with fruit yield. Key words: Lycopersicon esculentum, soluble solids, total solids

Contribution of Stem Dry Matter to Grain Yield in Wheat Cultivars

1991 ◽  
Vol 18 (1) ◽  
pp. 53 ◽  
Author(s):  
PC Pheloung ◽  
KHM Siddique
Keyword(s):  
Water Stress ◽  
Grain Yield ◽  
Dry Matter ◽  
Field Experiments ◽  
Yield Potential ◽  
Percentage Reduction ◽  
Wheat Cultivars ◽  
Activity Increase ◽  
Structural Carbohydrate ◽  
Days After Anthesis

Field experiments were conducted in the eastern wheat belt of Western Australia in a dry year with and without irrigation (1987) and in a wet year (1988), comparing three cultivars of wheat differing in height and yield potential. The aim of the study was to determine the contribution of remobilisable stem dry matter to grain dry matter under different water regimes in old and modern wheats. Stem non-structural carbohydrate was labelled with 14C 1 day after anthesis and the activity and weight of this pool and the grain was measured at 2, 18 and 58 days after anthesis. Gutha and Kulin, modern tall and semi-dwarf cultivars respectively, yielded higher than Gamenya, a tall older cultivar in all conditions, but the percentage reduction in yield under water stress was greater for the modern cultivars (41, 34 and 23%). In the grain of Gamenya, the increase in 14C activity after the initial labelling was highest under water stress. Generally, loss of 14C activity from the non-structural stem dry matter was less than the increase in grain activity under water stress but similar to or greater than grain activity increase under well watered conditions. Averaged over environments and cultivars, non-structural dry matter stored in the stem contributed at least 20% of the grain dry matter.

CHANGES IN ALPHA- AND BETA-AMYLASE ACTIVITIES DURING THE MATURATION OF DIFFERENT BARLEY CULTIVARS

1971 ◽  
Vol 51 (6) ◽  
pp. 469-477 ◽  
Author(s):  
D. E. LaBERGE ◽  
A. W. MacGREGOR ◽  
W. O. S. MEREDITH
Keyword(s):  
Dry Matter ◽  
Amylase Activity ◽  
Kernel Weight ◽  
Kernel Development ◽  
Barley Cultivars ◽  
Low Levels ◽  
Days After Anthesis ◽  
Unfavorable Weather

The percentage of dry matter, kernel weight, α-amylase activity and β-amylase activity, were determined at several stages of kernel development, from anthesis to harvest, in seven cultivars of Canadian barley. These included 6-row barleys (Conquest, Bonanza, and Keystone), 2-row barleys (Betzes and Centennial), and two 6-rowed selections from crosses between 2-row and 6-row barleys. The patterns for development of β-amylase enzymes were similar in all cultivars, and these activities were low initially, followed by a period of increasing activities commencing about 10 days after anthesis and reaching maximum values 20 days later; they then remained constant until the kernels were harvested. α-Amylase activity increased in all cultivars immediately after anthesis and then decreased to low levels after 10 days of kernel development. The α-amylase activities of Conquest, Bonanza, and Betzes increased again to quite high levels after maturity and just prior to delayed harvesting, owing to unfavorable weather that caused sprouting in these cultivars.

EFFECT OF TWO GREENHOUSE COVERS ON GROWTH, DRY MATTER CONTENT AND TOMATO FRUIT QUALITY

2005 ◽  
pp. 481-486
Author(s):  
L. Jarquin-Enriquez ◽  
E. Mercado-Silva ◽  
E. Castaño-Tostado
Keyword(s):  
Fruit Quality ◽  
Dry Matter ◽  
Tomato Fruit ◽  
Matter Content ◽  
Dry Matter Content

scholarly journals Disease Resistance and Biomass Stability of Forage Pearl Millet Hybrids with Partial Rust Resistance

Plant Disease ◽  
1999 ◽  
Vol 83 (8) ◽  
pp. 733-738 ◽  
Author(s):  
J. P. Wilson ◽  
R. N. Gates
Keyword(s):  
Pearl Millet ◽  
Biomass Production ◽  
Partial Resistance ◽  
Dry Matter ◽  
Field Experiments ◽  
Related Data ◽  
Progress Curve ◽  
Rust Severity ◽  
Days After Anthesis ◽  
Plot Design

The expression of partial resistance to Puccinia substriata var. indica and its contribution to digestible biomass production in forage pearl millet hybrids were evaluated in field experiments at Tifton, GA. Inbreds Tift 383, Tift 65, and nine inbreds with partial resistance selected from the cross Tift 383 × ‘ICMP 501’ were crossed to Tift 23DA4. The parental inbreds and hybrids were evaluated in natural epidemics in 1996 and 1997. Because of maturity differences among the lines, slope of the regression of logit rust severity on time (apparent infection rate) and area under the disease progress curve (AUDPC) calculated for a defined interval of plant growth (10 days before to 20 days after anthesis) and adjusted for initial rust severity at 10 days prior to anthesis were the most useful indicators of resistance. Inbred resistance was not a reliable predictor of hybrid resistance when evaluated by either variable. Hybrids were evaluated for biomass production in 1996 and 1997 in a split-plot design, with hybrids as main plots and nontreated or chlorothalonil fungicide-treated as subplots. Differences existed among hybrids for AUDPC and for digestible dry matter yield (DDMY) and its components. Over all hybrids, the response between DDMY and final rust severity was described by logarithmic regression. Two clusters of hybrids were identified by cluster analysis of disease-related data from both experiments. The cluster of susceptible hybrids tended to have a lower DDMY and were less stable over year × treatment environments than the cluster of partially resistant hybrids. Lodging in nontreated plots in 1997 primarily occurred in susceptible hybrids. Although resistance was expressed in certain hybrids, greater levels of partial resistance are needed to provide adequate protection against DDMY losses.

Studies of the chemical composition of kales and rapes. I. The kales

1959 ◽  
Vol 52 (2) ◽  
pp. 230-237 ◽  
Author(s):  
D. J. C. Jones
Keyword(s):  
Crude Protein ◽  
Dry Matter ◽  
Chemical Constituents ◽  
The Other ◽  
Winter Period ◽  
Crude Fibre ◽  
Whole Plant ◽  
Phosphorus And Potassium ◽  
Plant Basis ◽  
Matter Basis

1. Four varieties of marrow stem kale, three of thousand headed kales, Hungry Gap Kale and Rape-Kale were grown at three centres in mid-Wales. They were sampled in the early winter period and separate leaf and stem samples analysed for the proximate constituents and minerals.2. Leaf to stem ratios were measured on both a green and dry matter basis and the latter values used to calculate whole plant values for the chemical constituents.3. The leaves of the marrow stem kales were higher in dry matter than the stems, except in the case of the Purple Stem Kale. This variety resembled the thousand headed and rape-type kales in having a higher dry matter in the stems. On a dry matter basis, the leaves of all the varieties were richer than the stems in ether extract, crude protein, total ash and all the minerals except potassium and sodium. These elements occurred to a greater extent in the stems of the fleshy stemmed marrow stem kales than in the leaves. The stems were higher in crude fibre and nitrogen-free extractives.4. The leaves of the rape-type kales were higher than those of the other varieties in silica, phosphorus and potassium. They were the best source of phosphorus on a whole plant basis. The marrow stem kales had considerably higher leaf and stem values for sodium and were markedly superior to the other varieties as a source of the element.

scholarly journals Sensory acceptance and physico-chemical composition of mixed minas frescal cheese

2020 ◽  
Vol 36 (6) ◽  
Author(s):  
Bruna Samara dos Santos Rekowsky ◽  
Géssica Cordeiro de Araújo ◽  
Nelson de Carvalho Delfino ◽  
Marion Pereira da Costa ◽  
Thadeu Mariniello Silva
Keyword(s):  
Dry Matter ◽  
Bovine Milk ◽  
Buffalo Milk ◽  
Raw Material ◽  
Cow Milk ◽  
Consumer Market ◽  
Total Solids ◽  
Physico Chemical ◽  
Hedonic Scale ◽  
Milk Mixture

Buffalo milk presents higher proteins and lipids concentration than cow milk, which provides a better yield in cheese-making production and products with considerable sensory approval. However, buffalo milk is not regularly available throughout the year due to different handling conditions. Thus, to guarantee the supply of buffalo milk dairy products during the year, the addition of bovine milk is an alternative. Therefore, this study aimed to test the effect of a buffalo and bovine milk mixture for the Minas Frescal cheese elaboration by physico-chemical, sensory analysis and obtaining yield. The raw material was analysed for the parameters of acidity, density, fat, total solids and solid-not-fat. There were 3 Minas Frescal cheeses elaborated from 3 formulations: 100% buffalo milk, 100% bovine milk and the mixture of 50% of each milk. The cheeses were submitted to the Gravimetric and Gerber methods to obtain values of moisture and fat, as well as to obtain, indirectly, fat in dry matter. For bovine and buffalo milk, the parameters evaluated (acidity, density, fat, total solids and solids-not-fat) complied with Brazilian legislation and parameters described in the literature. For the bovine, mixed and buffalo fresh cheeses, values were obtained, respectively, for moisture (74.04, 60.93 and 63.61), fat in dry matter (44.35, 42.23 and 46.03) and cheese yield (27, 20.8 and 24.2), indicating a higher yield for the bovine Minas Frescal cheese and higher fat content for the buffalo cheese. The overall acceptance of the mixed Minas Frescal cheese was significantly superior to the bovine and buffalo cheese. The parameters of colour, appearance, texture, flavour and overall acceptance were above 8 points in the hedonic scale (‘moderately liked’ to ‘extremely liked’), and the aroma attribute scored was above 7 (‘I enjoyed regularly’ to ‘moderately liked’). Therefore, the elaboration of Minas Frescal cheese from the mixture of 2 matrices (buffalo and bovine milk) demonstrated technological viability with the potential to meet the demands of the consumer market.

scholarly journals Isolatation and Identification of the Fungi Causing Tomato Fruit Rot Disease in the Vicinity of Tandojam, Sindh

2020 ◽  
Author(s):  
S. Nizamani ◽  
A. A. Khaskheli ◽  
A. M. Jiskani ◽  
S. A. Khaskheli ◽  
A. J. Khaskheli ◽  
...  
Keyword(s):  
Tomato Fruit ◽  
Aerial Mycelium ◽  
Alternaria Solani ◽  
Economic Loss ◽  
Geotrichum Candidum ◽  
Fruit Rot ◽  
Post Harvest ◽  
Standard Procedures ◽  
Fruit Samples ◽  
Rot Disease

Background: The post-harvest tomato fruit rot disease is common threat to the tomato fruit, causing huge economic loss as revealed by (GOP, 2018). The present study was conducted for isolatation and identification of causative agent of tomato fruit rot in order to formulate the proper management stretegies. Methods: Study was conducted in three phases. Phase one included collection of tomato fruit samples from vicinity of Tandojam. In phase two pathogens were isolated from the samples at laboratory, while in the phase three pathogens were identified using standard procedures. Result: The experimental results indicated Alternaria solani as the main cause of post-harvest tomato fruit rot. The symptoms observed were presence of brown to black rot lesions on tomato fruits with distinct rings ranging from small pin-heads to whole surface of fruit. A total of six different fungi viz., Alternaria alternata, Aspergillus niger, Alternaria solani, Geotrichum candidum, Fusarium oxysporum and Rhizopus stolonifer were found to be associated with post harvest tomato rot. Significantly higher infection was recorded for A. solani (53.667%) followed by A. niger (16.333%) and G. candidum (13.00%). The lowest infection percentage was observed for F. oxysporum (2.333%), followed by A. alternata (4.00%) and R. stolonifer (9.00%). A. solani produced aerial mycelium with yellowish to reddish diffusible pigments. A. niger cultures were typically black and colonies were initially whitish to yellow and later became brown to black in colour. G. candidum produced white and nonaerial colonies. F. oxysporum produced circular, aerial mycelium initially white, later changed to light pink. R. stolonifer produced whitish to grey fuzzy colonies.

scholarly journals Physical Characteristics of Mature Green and Ripe Tomato Fruit Tissue of Normal and Firm Genotypes

1996 ◽  
Vol 121 (3) ◽  
pp. 380-383 ◽  
Author(s):  
E.V. Wann
Keyword(s):  
Cell Wall ◽  
Stress Relaxation ◽  
Tomato Fruit ◽  
Physical Characteristics ◽  
Tissue Elasticity ◽  
Ripe Fruit ◽  
Fruit Tissue ◽  
Relaxation Analysis ◽  
Fruit Samples ◽  
Mutant Lines

Tissue firmness of ripe tomatoes is controlled by cell wall integrity of the fruit tissue and by the enzymatic softening that normally occurs during ripening. This study was conducted to determine the physical characteristics of cells and tissues of mature green (MG) and ripe fruit that might account for differences in firmness between `Rutgers' (normal), `Flora-Dade' (Firm), and two mutant lines called high-pigment (T4065 hp) and dark-green (T4099 dg), both of which possess extra firm fruit. Fruit samples were tested for resistance to a force applied to whole fruit and to sections of the pericarp tissue and by stress-relaxation analysis. Determinations were also made of cell density and cell wall content within the pericarp tissue. Fruit of mutant lines had firmer tissue than either `Rutgers' or `Flora-Dade' at MG or ripe. Whole fruit compression measurements showed that T4099 dg was firmer than T4065 hp or `Rutgers' at MG and firmer than `Flora-Dade' and `Rutgers' when ripe. Whole fruit of `Flora-Dade' were significantly firmer than `Rutgers' at MG and ripe. Firmness measured by compressive strength also showed that mutant lines had firmer pericarp tissue than the wild types at both MG and ripe stages. Stress-relaxation analysis showed that MG fruit of T4099 dg had greater tissue elasticity than `Rutgers' or `Flora-Dade'. Ripe fruit of both mutant lines had more tissue elasticity than wild types. There were no apparent differences among the genotypes due to tissue relaxation. From these analyses, tissue elasticity appears to be a significant parameter in determining tissue firmness in the tomato genotypes used in this study. Firmness and textural quality of ripe tomatoes appeared to be dependent on elasticity of the pericarp tissue and on the level of enzymatic softening during ripening.

scholarly journals Mixing sweet cream buttermilk with whole milk to produce cream cheese

2015 ◽  
Vol 54 (2) ◽  
pp. 73-78 ◽  
Author(s):  
Masoud Bahrami ◽  
Dariush Ahmadi ◽  
Faranak Beigmohammadi ◽  
Fakhrisadat Hosseini
Keyword(s):  
Statistical Analysis ◽  
Chemical Composition ◽  
Membrane Protein ◽  
Milk Fat ◽  
Dry Matter ◽  
Skim Milk ◽  
Organoleptic Properties ◽  
Cream Cheese ◽  
Total Solids ◽  
Whole Milk

Abstract Buttermilk is an important by-product of the manufacture of butter. Sweet-cream buttermilk (SCBM) is similar in composition to skim milk, except for its high phospholipid and milk fat globular membrane protein content. The main objective of this investigation was to produce optimum quality cream cheese by replacing whole milk with different proportions of SCBM (5, 10, 15, 20, 25, 30, 35, 40, 45, and 50%). Statistical analysis showed that there were significant differences (p < 0.05) between the chemical and organoleptic properties of the samples. As the percentage of SCBM increased, the chemical composition of total solids, fat, protein, fat in dry matter (FDM) and ash of cheese milk decreased significantly, leading to a softer, moister curd. Samples prepared with more than 25% SCBM were not acceptable to the taste panel. The cream cheeses prepared using 25% and 30% SCBM had the highest yields. Total solids and FDM were strong predictors of cheese yield (r2 ≈ 0.589). The results also showed that the best range for replacement using SCBM is 20–25%.

Sign in / Sign up

Export Citation Format

Share Document