scholarly journals Extraction and Characterization of Pequi Seed Oil for Biodiesel Production: A Green Management of Waste to Biofuel Using Ethanol and Heterogeneous Catalysis

2022 ◽  
Author(s):  
Munique Guimarães ◽  
Rafael Evaristo ◽  
Julio de Macedo ◽  
Grace Ghesti
Keyword(s):  
Heterogeneous Catalysis ◽  
Heterogeneous Catalysts ◽  
Oil Extraction ◽  
Biodiesel Production ◽  
Biomass Composition ◽  
Molar Ratio ◽  
Extractive Content ◽  
Process Waste ◽  
Exchange Resins

This work reports the characterization of a vegetable oil extracted from pequi seeds, an agroindustrial residue, and its biodiesel production using ethanol and heterogeneous catalysis. The pequi seeds showed 40.73 wt.% of extractive content, which represents a large amount of the biomass composition. The crude oil extracted from the pequi seeds with ethanol as solvent presented a high content of free fatty acids (FFAs), mainly oleic (54.14%) and palmitic (36.71%) acids, resulting in an acidity value of 13.8 ± 0.1 mg KOH g-1. The esterification/transesterification process was performed using two ion exchange resins as heterogeneous catalysts, a commercial protonic form (assigned as PR) and a zirconium-exchanged (assigned as PRZr). Conversions of 87.1 and 91.4% were achieved for PR and PRZr as catalysts, respectively, at optimal conditions (1:6 oil-to-alcohol molar ratio, 25 wt.% of catalyst, 100 ºC and 1 h). These results indicated that heterogeneous acid catalysts can be successfully applied in biodiesel production from fatty acidrich oils, such as the one extracted from pequi seeds. Also, a simultaneous process involving both oil extraction and biodiesel production was tested using PRZr as catalyst (25 wt.% of catalyst and 100 ºC), but due to the greater amount of ethanol necessary for the oil extraction (1:16 oil to alcohol mass ratio) the conversion reached only 51.5% after 5 h. For that reason, this work proposes a two stage system for biodiesel production that integrates oil extraction (stage one) and the esterification/transesterification reaction (stage two) to achieve a greener process, waste-to-bioenergy.

Mesoporous Silicas as Basic Heterogeneous Catalysts for the Formation of Biodiesel

2018 ◽  
pp. 119-155
Author(s):  
Dilson Cardoso ◽  
Laura Lorena da Silva ◽  
Iago W. Zapelini
Keyword(s):  
Heterogeneous Catalysis ◽  
Heterogeneous Catalysts ◽  
Model Reaction ◽  
Biodiesel Production ◽  
Mesoporous Silicas ◽  
Organic Cations ◽  
Operational Parameters ◽  
Solid Catalysts ◽  
Basic Properties

The principal aspects of the production of biodiesel using heterogeneous catalysis are presented, comparing this alternative process to conventional (homogeneous) processes and evaluating the main operational parameters. The most important techniques for the preparation and characterization of silicas with basic properties are mentioned, dividing these materials into two groups with distinct properties: as-synthesized silicas, especially the M41S family, with their pores occluded with organic cations, and functionalized silicas, with accessible pores. The catalytic properties of these silicas were evaluated in transesterifications using a model reaction and vegetable oil. Finally, a brief presentation is made of other solid catalysts with basic properties that can be used in the biodiesel production reaction.

scholarly journals An Overview of Biodiesel Production via Calcium Oxide Based Catalysts: Current State and Perspective

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3950
Author(s):  
Hoora Mazaheri ◽  
Hwai Chyuan Ong ◽  
Zeynab Amini ◽  
Haji Hassan Masjuki ◽  
M. Mofijur ◽  
...  
Keyword(s):  
Heterogeneous Catalysis ◽  
Calcium Oxide ◽  
Heterogeneous Catalysts ◽  
Low Cost ◽  
Biodiesel Production ◽  
Catalyst Synthesis ◽  
Process Improvements ◽  
Current State ◽  
The Common ◽  
Activity Mechanism

Biodiesel is a clean, renewable, liquid fuel that can be used in existing diesel engines without modification as pure or blend. Transesterification (the primary process for biodiesel generation) via heterogeneous catalysis using low-cost waste feedstocks for catalyst synthesis improves the economics of biodiesel production. Heterogeneous catalysts are preferred for the industrial generation of biodiesel due to their robustness and low costs due to the easy separation and relatively higher reusability. Calcium oxides found in abundance in nature, e.g., in seashells and eggshells, are promising candidates for the synthesis of heterogeneous catalysts. However, process improvements are required to design productive calcium oxide-based catalysts at an industrial scale. The current work presents an overview of the biodiesel production advancements using calcium oxide-based catalysts (e.g., pure, supported, and mixed with metal oxides). The review discusses different factors involved in the synthesis of calcium oxide-based catalysts, and the effect of reaction parameters on the biodiesel yield of calcium oxide-based catalysis are studied. Further, the common reactor designs used for the heterogeneous catalysis using calcium oxide-based catalysts are explained. Moreover, the catalytic activity mechanism, challenges and prospects of the application of calcium oxide-based catalysts in biodiesel generation are discussed. The study of calcium oxide-based catalyst should continue to be evaluated for the potential of their application in the commercial sector as they remain the pivotal goal of these studies.

scholarly journals Biodiesel Production from Melia azedarach and Ricinus communis Oil by Transesterification Process

Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 427 ◽  
Author(s):  
Muhammad Awais ◽  
Sa’ed A Musmar ◽  
Faryal Kabir ◽  
Iram Batool ◽  
Muhammad Asif Rasheed ◽  
...  
Keyword(s):  
Ricinus Communis ◽  
Cost Effective ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Melia Azedarach ◽  
Renewable Fuel ◽  
Animal Fats ◽  
Edible Crops ◽  
American Society

Biodiesel is a renewable fuel usually produced from vegetable oils and animal fats. This study investigates the extraction of oil and its conversion into biodiesel by base-catalyzed transesterification. Firstly, the effect of various solvents (methanol, n-hexane, chloroform, di-ethyl ether) on extraction of oil from non-edible crops, such as R. communis and M. azedarach, were examined. It was observed that a higher concentration of oil was obtained from R. communis (43.6%) as compared to M. azedarach (35.6%) by using methanol and n-hexane, respectively. The extracted oils were subjected to NaOH (1%) catalyzed transesterification by analyzing the effect of oil/methanol molar ratio (1:4, 1:6, 1:8 and 1:10) and varying temperature (20, 40, 60 and 80 °C) for 2.5 h of reaction time. M. azedarach yielded 88% and R. communis yielded 93% biodiesel in 1:6 and 1:8 molar concentrations at ambient temperature whereas, 60 °C was selected as an optimum temperature, giving 90% (M. azedarach) and 94% (R. communis) biodiesel. The extracted oil and biodiesel were characterized for various parameters and most of the properties fulfilled the American Society for Testing and Materials (ASTM) standard biodiesel. The further characterization of fatty acids was done by Gas Chromatography/Mass Spectrometer (GC/MS) and oleic acid was found to be dominant in M. azedarach (61.5%) and R. communis contained ricinoleic acid (75.53%). Furthermore, the functional groups were analyzed by Fourier Transform Infrared Spectroscopy. The results suggested that both of the oils are easily available and can be used for commercial biodiesel production at a cost-effective scale.

scholarly journals Alternative Raw Materials to Produce Biodiesel through Alkaline Heterogeneous Catalysis

Catalysts ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 690 ◽  
Author(s):  
Edgar M. Sánchez Faba ◽  
Gabriel O. Ferrero ◽  
Joana M. Dias ◽  
Griselda A. Eimer
Keyword(s):  
Heterogeneous Catalysis ◽  
Raw Materials ◽  
Fatty Acid Content ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Absolute Methanol ◽  
Solid Catalyst ◽  
Oil Refineries ◽  
Cooking Oil ◽  
Used Cooking Oil

Recent research focuses on new biodiesel production and purification technologies that seek a carbon-neutral footprint, as well as cheap, renewable and abundant raw materials that do not compete with the demand for food. Then, many attractive alternatives arise due to their availability or low-cost, such as used cooking oil, Jatropha oil (non-edible) or byproducts of vegetable oil refineries. Due to their composition and the presence of moisture, these oils may need a pretreatment to reach the established conditions to be used in the biodiesel production process so that the final product complies with the international quality standards. In this work, a solid catalyst based on 10 wt % sodium oxide supported on mesoporous silica SBA-15, was employed in the transesterification of different feedstocks (commercial sunflower and soybean oil, used cooking oil, acid oil from soapstock and Jatropha hieronymi oil) with absolute methanol in the following reaction conditions—2–8 wt % catalyst, 14:1 methanol to oil molar ratio, 60 °C, vigorous magnetic stirring and 5 h of reaction. In this way, first- and second-generation biodiesel was obtained through heterogeneous catalysis with methyl ester yields between 52 and 97 wt %, depending on the free fatty acid content and the moisture content of the oils.

Current scenario of catalysts for biodiesel production: a critical review

2018 ◽  
Vol 34 (2) ◽  
pp. 267-297 ◽  
Author(s):  
Farrukh Jamil ◽  
Lamya Al-Haj ◽  
Ala’a H. Al-Muhtaseb ◽  
Mohab A. Al-Hinai ◽  
Mahad Baawain ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Low Cost ◽  
Bifunctional Catalyst ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalysts ◽  
Animal Fats ◽  
Current Scenario ◽  
Short Chain Alcohol

AbstractDue to increasing concerns about global warming and dwindling oil supplies, the world’s attention is turning to green processes that use sustainable and environmentally friendly feedstock to produce renewable energy such as biofuels. Among them, biodiesel, which is made from nontoxic, biodegradable, renewable sources such as refined and used vegetable oils and animal fats, is a renewable substitute fuel for petroleum diesel fuel. Biodiesel is produced by transesterification in which oil or fat is reacted with short chain alcohol in the presence of a catalyst. The process of transesterification is affected by the mode of reaction, molar ratio of alcohol to oil, type of alcohol, nature and amount of catalysts, reaction time, and temperature. Various studies have been carried out using different oils as the raw material; different alcohols (methanol, ethanol, butanol); different catalysts; notably homogeneous catalysts such as sodium hydroxide, potassium hydroxide, sulfuric acid, and supercritical fluids; or, in some cases, enzymes such as lipases. This article focuses on the application of heterogeneous catalysts for biodiesel production because of their environmental and economic advantages. This review contains a detailed discussion on the advantages and feasibility of catalysts for biodiesel production, which are both environmentally and economically viable as compared to conventional homogeneous catalysts. The classification of catalysts into different categories based on a catalyst’s activity, feasibility, and lifetime is also briefly discussed. Furthermore, recommendations have been made for the most suitable catalyst (bifunctional catalyst) for low-cost oils to valuable biodiesel and the challenges faced by the biodiesel industry with some possible solutions.

Advanced Electron Microscopy Characterization of Nanostructured Heterogeneous Catalysts

2004 ◽  
Vol 10 (1) ◽  
pp. 55-76 ◽  
Author(s):  
Jingyue Liu
Keyword(s):  
Electron Microscopy ◽  
Heterogeneous Catalysis ◽  
Heterogeneous Catalysts ◽  
Nanostructured Catalysts ◽  
Catalyst Characterization ◽  
Challenges And Opportunities ◽  
Recent Developments ◽  
Microscopy Characterization ◽  
Microscopy Techniques

Heterogeneous catalysis is one of the oldest nanosciences. Although model catalysts can be designed, synthesized, and, to a certain degree, characterized, industrial heterogeneous catalysts are often chemically and physically complex systems that have been developed through many years of catalytic art, technology, and science. The preparation of commercial catalysts is generally not well controlled and is often based on accumulated experiences. Catalyst characterization is thus critical to developing new catalysts with better activity, selectivity, and/or stability. Advanced electron microscopy, among many characterization techniques, can provide useful information for the fundamental understanding of heterogeneous catalysis and for guiding the development of industrial catalysts. In this article, we discuss the recent developments in applying advanced electron microscopy techniques to characterizing model and industrial heterogeneous catalysts. The importance of understanding the catalyst nanostructure and the challenges and opportunities of advanced electron microscopy in developing nanostructured catalysts are also discussed.

scholarly journals Calcium Oxide Derived from Waste Shells of Mussel, Cockle, and Scallop as the Heterogeneous Catalyst for Biodiesel Production

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Achanai Buasri ◽  
Nattawut Chaiyut ◽  
Vorrada Loryuenyong ◽  
Phatsakon Worawanitchaphong ◽  
Sarinthip Trongyong
Keyword(s):  
Calcium Oxide ◽  
Heterogeneous Catalysts ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Bet Method ◽  
Xrf Scanning ◽  
Waste Shell ◽  
Calcination Method

The waste shell was utilized as a bioresource of calcium oxide (CaO) in catalyzing a transesterification to produce biodiesel (methyl ester). The economic and environmen-friendly catalysts were prepared by a calcination method at 700–1,000°C for 4 h. The heterogeneous catalysts were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), and the Brunauer-Emmett-Teller (BET) method. The effects of reaction variables such as reaction time, reaction temperature, methanol/oil molar ratio, and catalyst loading on the yield of biodiesel were investigated. Reusability of waste shell catalyst was also examined. The results indicated that the CaO catalysts derived from waste shell showed good reusability and had high potential to be used as biodiesel production catalysts in transesterification of palm oil with methanol.

scholarly journals Biodiesel Production over Niobium-Containing Catalysts: A Review

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5506
Author(s):  
Daniel Carreira Batalha ◽  
Márcio José da Silva
Keyword(s):  
Catalytic Activity ◽  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Raw Materials ◽  
Catalytic Performance ◽  
High Specific Surface Area ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Main Reaction ◽  
High Catalytic Activity

Nowadays, the synthesis of biofuels from renewable raw materials is very popular. Among the various challenges involved in improving these processes, environmentally benign catalysts compatible with an inexpensive feedstock have become more important. Herein, we report the recent advances achieved in the development of Niobium-containing heterogeneous catalysts as well as their use in routes to produce biodiesel. The efficiency of different Niobium catalysts in esterification and transesterification reactions of lipids and oleaginous raw materials was evaluated, considering the effect of main reaction parameters such as temperature, time, catalyst load, and oil:alcohol molar ratio on the biodiesel yield. The catalytic performance of Niobium compounds was discussed considering the characterization data obtained by different techniques, including NH3-TPD, BET, and Pyr-FT-IR analysis. The high catalytic activity is attributed to its inherent properties, such as the active sites distribution over a high specific surface area, strength of acidity, nature, amount of acidic sites, and inherent mesoporosity. On top of this, recycling experiments have proven that most Niobium catalysts are stable and can be repeatedly used with consistent catalytic activity.

Acidic Functionalized Nanobohemite: An Active Catalyst for Methyl Ester Production

2019 ◽  
Vol 17 (11) ◽  
Author(s):  
Shokoufe Hosseini ◽  
G. R. Moradi ◽  
Kiumars Bahrami
Keyword(s):  
Active Sites ◽  
Free Acid ◽  
Reaction Medium ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Optimal Point ◽  
Acidic Catalysts ◽  
Boehmite Nanoparticles ◽  
Optimized Conditions

Abstract In the biodiesel production, acidic catalysts are ideally suitable for reacting with different oil sources at various free acid levels. On the other hand, the nanocatalysts can easily be propagated in the reaction medium and provide more accessible active sites for reaction. The aim of this work was to synthesize an acidic nanocatalyst based on boehmite nanoparticles then studying it to biodiesel production from soybean oil. Up to now, no reports were found on biodiesel production by this catalyst. After the synthesis and characterization of the catalyst, using response surface methodology (RSM), the optimized conditions for transesterification were 4.87 wt.% for catalyst dosage, 13:1 for the molar ratio of methanol to oil, 60 °C for reaction temperature, and 3 h for reaction time. At the optimal point, the production yield was 99.8 %. After six consecutive use of the catalyst, the yield dropped slightly (88 %). Consequently, the catalyst can be employed efficiently several runs in the production process.

Biodiesel Production from Kapok (Ceiba pentandra) Seed Oil using Naturally Alkaline Catalyst as an Effort of Green Energy and Technology

2013 ◽  
Vol 2 (3) ◽  
pp. 169-173 ◽  
Author(s):  
N.A. Handayani ◽  
H. Santosa ◽  
M. Sofyan ◽  
I. Tanjung ◽  
A. Chyntia ◽  
...  
Keyword(s):  
Seed Oil ◽  
Green Energy ◽  
Green Technology ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Alkaline Catalyst ◽  
Biodiesel Feedstock ◽  
Presidential Decree ◽  
Near Future

Nowadays, energy that used to serve all the needs of community, mainly generated from fossil (conventional energy). Terrace in energy consumption is not balanced with adequate fossil fuel reserves and will be totally depleted in the near future. Indonesian Government through a Presidential Decree No. 5 year 2006 mandates an increased capacity in renewable energy production from 5 percent to 15 percent in 2025. C. pentandra seed oil has feasibility as a sustainable biodiesel feedstock in Indonesia. The aim of this paper was to investigate biodiesel production from ceiba petandra seed oil using naturally potassium hydroxide catalyst. Research designs are based on factorial design with 2 levels and 3 independent variables (temperature, reaction time and molar ratio of methanol to oil). According to data calculation, the most influential single variable is molar ratio of methanol to oil. Characterization of biodiesel products meet all the qualifications standardized by SNI 04-7182-2006. Keywords: biodiesel, kapok seed oil, c. pentandra, green technology

Sign in / Sign up

Export Citation Format

Share Document