scholarly journals Biodiesel Production from Melia azedarach and Ricinus communis Oil by Transesterification Process

Catalysts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 427 ◽  
Author(s):  
Muhammad Awais ◽  
Sa’ed A Musmar ◽  
Faryal Kabir ◽  
Iram Batool ◽  
Muhammad Asif Rasheed ◽  
...  
Keyword(s):  
Ricinus Communis ◽  
Cost Effective ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Melia Azedarach ◽  
Renewable Fuel ◽  
Animal Fats ◽  
Edible Crops ◽  
American Society

Biodiesel is a renewable fuel usually produced from vegetable oils and animal fats. This study investigates the extraction of oil and its conversion into biodiesel by base-catalyzed transesterification. Firstly, the effect of various solvents (methanol, n-hexane, chloroform, di-ethyl ether) on extraction of oil from non-edible crops, such as R. communis and M. azedarach, were examined. It was observed that a higher concentration of oil was obtained from R. communis (43.6%) as compared to M. azedarach (35.6%) by using methanol and n-hexane, respectively. The extracted oils were subjected to NaOH (1%) catalyzed transesterification by analyzing the effect of oil/methanol molar ratio (1:4, 1:6, 1:8 and 1:10) and varying temperature (20, 40, 60 and 80 °C) for 2.5 h of reaction time. M. azedarach yielded 88% and R. communis yielded 93% biodiesel in 1:6 and 1:8 molar concentrations at ambient temperature whereas, 60 °C was selected as an optimum temperature, giving 90% (M. azedarach) and 94% (R. communis) biodiesel. The extracted oil and biodiesel were characterized for various parameters and most of the properties fulfilled the American Society for Testing and Materials (ASTM) standard biodiesel. The further characterization of fatty acids was done by Gas Chromatography/Mass Spectrometer (GC/MS) and oleic acid was found to be dominant in M. azedarach (61.5%) and R. communis contained ricinoleic acid (75.53%). Furthermore, the functional groups were analyzed by Fourier Transform Infrared Spectroscopy. The results suggested that both of the oils are easily available and can be used for commercial biodiesel production at a cost-effective scale.

scholarly journals Modeling and Optimization of Microwave-Based Bio-Jet Fuel from Coconut Oil: Investigation of Response Surface Methodology (RSM) and Artificial Neural Network Methodology (ANN)

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 295
Author(s):  
Mei Yin Ong ◽  
Saifuddin Nomanbhay ◽  
Fitranto Kusumo ◽  
Raja Mohamad Hafriz Raja Shahruzzaman ◽  
Abd Halim Shamsuddin
Keyword(s):  
Statistical Tests ◽  
Coconut Oil ◽  
Jet Fuel ◽  
Molar Ratio ◽  
Ann Model ◽  
Fuel Production ◽  
Turbine Engine ◽  
Renewable Fuel ◽  
American Society ◽  
Better Than

In this study, coconut oils have been transesterified with ethanol using microwave technology. The product obtained (biodiesel and FAEE) was then fractional distillated under vacuum to collect bio-kerosene or bio-jet fuel, which is a renewable fuel to operate a gas turbine engine. This process was modeled using RSM and ANN for optimization purposes. The developed models were proved to be reliable and accurate through different statistical tests and the results showed that ANN modeling was better than RSM. Based on the study, the optimum bio-jet fuel production yield of 74.45 wt% could be achieved with an ethanol–oil molar ratio of 9.25:1 under microwave irradiation with a power of 163.69 W for 12.66 min. This predicted value was obtained from the ANN model that has been optimized with ACO. Besides that, the sensitivity analysis indicated that microwave power offers a dominant impact on the results, followed by the reaction time and lastly ethanol–oil molar ratio. The properties of the bio-jet fuel obtained in this work was also measured and compared with American Society for Testing and Materials (ASTM) D1655 standard.

scholarly journals Biodiesel Production from a Novel Nonedible Feedstock, Soursop (Annona muricata L.) Seed Oil

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2562 ◽  
Author(s):  
Chia-Hung Su ◽  
Hoang Nguyen ◽  
Uyen Pham ◽  
My Nguyen ◽  
Horng-Yi Juan
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Annona Muricata ◽  
Reaction Conditions ◽  
Biodiesel Feedstock ◽  
Acid Catalyzed ◽  
American Society ◽  
Optimal Reaction

This study investigated the optimal reaction conditions for biodiesel production from soursop (Annona muricata) seeds. A high oil yield of 29.6% (w/w) could be obtained from soursop seeds. Oil extracted from soursop seeds was then converted into biodiesel through two-step transesterification process. A highest biodiesel yield of 97.02% was achieved under optimal acid-catalyzed esterification conditions (temperature: 65 °C, 1% H2SO4, reaction time: 90 min, and a methanol:oil molar ratio: 10:1) and optimal alkali-catalyzed transesterification conditions (temperature: 65 °C, reaction time: 30 min, 0.6% NaOH, and a methanol:oil molar ratio: 8:1). The properties of soursop biodiesel were determined and most were found to meet the European standard EN 14214 and American Society for Testing and Materials standard D6751. This study suggests that soursop seed oil is a promising biodiesel feedstock and that soursop biodiesel is a viable alternative to petrodiesel.

scholarly journals Melliferous flora and pollen characterization of honey samples of Apis mellifera L., 1758 in apiaries in the counties of Ubiratã and Nova Aurora, PR

2013 ◽  
Vol 85 (1) ◽  
pp. 307-326 ◽  
Author(s):  
ELIZABETE S. SEKINE ◽  
VAGNER A.A. TOLEDO ◽  
MARCELO G. CAXAMBU ◽  
SUZANE CHMURA ◽  
ELIZA H. TAKASHIBA ◽  
...  
Keyword(s):  
Glycine Max ◽  
Apis Mellifera ◽  
Native Species ◽  
Ricinus Communis ◽  
Cultivated Plants ◽  
Melia Azedarach ◽  
Native Vegetation ◽  
Pollen Types ◽  
Pollen Analyses

The aim of this study was to carry out a survey of the flora with potential for beekeeping in the counties of Ubiratã and Nova Aurora-PR through the collection of plants and pollen analyses in honey samples collected monthly. 208 species of plants were recorded, distributed in 66 families. The families that showed the major richness of pollen types were: Asteraceae, Myrtaceae and Solanaceae. Approximately 80 pollen types were found in honey samples, most of them were characterized as heterofloral. Cultivated plants, such as Glycine max (soybean) and Eucalyptus spp., were representative in some months of the year. Exotic species, such as Ricinus communis and Melia azedarach, were also frequent. However, over than 50% of the pollen types belong to native species of the region, such as Schinus terebinthifolius, Baccharis spp. Alchornea triplinervia, Parapiptadenia rigida, Hexaclamys edulis, Zanthoxylum sp. and Serjania spp., indicating the importance of the native vegetation for the survival of the colonies.

scholarly journals Pre-Treatment of Waste Frying Oils for Biodiesel Production

2015 ◽  
Vol 9 (7) ◽  
pp. 99 ◽  
Author(s):  
Nyoman Puspa Asri ◽  
Diah Agustina Puspita Sari
Keyword(s):  
Raw Materials ◽  
Batch Reactor ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
High Price ◽  
Composite Catalyst ◽  
Frying Oils ◽  
Animal Fats ◽  
Waste Frying Oils ◽  
Pre Treatment

Synthesis of biodiesel is a strategic step in overcoming energy scarcity and the environmental degradationcaused by the continuous use of the petroleum based energy. Biodiesel as an alternative fuel for diesel engine isproduced from renewable resources such as vegetable oils and animal fats. The main obstacle in the biodieselproduction is the high price of the raw materials, resulting in the price of biodiesel is not competitive comparedto the petroleum diesel. Therefore, the use of waste frying oils (WFO) is one way to reduce the cost of biodieselproduction, because of its availability and low price. In the present work, WFO from California Fried chicken(CFC) restaurants in Surabaya were used as feed stock for the biodiesel production. The experiments wereconducted using three steps of processes: pre-treatment of WFO, preparation of alumina based compositecatalyst CaO/KI/γ-Al2O3 and transesterification of treated WFO. WFO was treated by several types and variousamounts of activated adsobents. The treated WFO was transesterified in three neck glass batch reactor withrefluxed methanol using CaO/KI/γ-Al2O3. The results reveal that the best method for treating WFO is using 7.5%(wt. % to WFO) of coconut coir. Alumina based composite catalyst CaO/KI/γ-Al2O3 was very promising fortransesterification of WFO into biodiesel. The yield of biodiesel was 83% and obtained at 65ºC, 5 h of reactiontime, 1:18 of molar ratio WFO to methanol and 6% amount of catalyst.

Synthesis of Biodiesel from Neem Oil Using Mg-Al Nano Hydrotalcite

2013 ◽  
Vol 678 ◽  
pp. 268-272 ◽  
Author(s):  
R. Manivannan ◽  
C. Karthikeyan
Keyword(s):  
Methyl Esters ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Solid Base ◽  
Neem Oil ◽  
Solid Base Catalysts ◽  
Animal Fats ◽  
Base Catalysts ◽  
Benign Process ◽  
Nano Catalysts

Abstract Methyl ester of fatty acids, derived from vegetable oils or animal fats are known as biodiesel. The most common method of biodiesel production is transesterification (alcoholysis) of oil (triglycerides) with methanol in the presence of a catalyst which gives biodiesel (fatty acid methyl esters, FAME) and glycerol (by product). In this work, an environmentally benign process for the methanolysis of neem oil to methyl esters using Mg–Al nano hydrotalcites as solid base catalysts in a heterogeneous manner was developed. The effect of the reaction temperature, reaction time, catalyst amount, and methanol /oil molar ratio on the Mg-Al nano hydrotalcite was analyzed. The nano catalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM). Biodiesel produced from the neem oil by using Mg-Al nano hydrotalcite catalyst was analyzed by gas chromatography.

Current scenario of catalysts for biodiesel production: a critical review

2018 ◽  
Vol 34 (2) ◽  
pp. 267-297 ◽  
Author(s):  
Farrukh Jamil ◽  
Lamya Al-Haj ◽  
Ala’a H. Al-Muhtaseb ◽  
Mohab A. Al-Hinai ◽  
Mahad Baawain ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Low Cost ◽  
Bifunctional Catalyst ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalysts ◽  
Animal Fats ◽  
Current Scenario ◽  
Short Chain Alcohol

AbstractDue to increasing concerns about global warming and dwindling oil supplies, the world’s attention is turning to green processes that use sustainable and environmentally friendly feedstock to produce renewable energy such as biofuels. Among them, biodiesel, which is made from nontoxic, biodegradable, renewable sources such as refined and used vegetable oils and animal fats, is a renewable substitute fuel for petroleum diesel fuel. Biodiesel is produced by transesterification in which oil or fat is reacted with short chain alcohol in the presence of a catalyst. The process of transesterification is affected by the mode of reaction, molar ratio of alcohol to oil, type of alcohol, nature and amount of catalysts, reaction time, and temperature. Various studies have been carried out using different oils as the raw material; different alcohols (methanol, ethanol, butanol); different catalysts; notably homogeneous catalysts such as sodium hydroxide, potassium hydroxide, sulfuric acid, and supercritical fluids; or, in some cases, enzymes such as lipases. This article focuses on the application of heterogeneous catalysts for biodiesel production because of their environmental and economic advantages. This review contains a detailed discussion on the advantages and feasibility of catalysts for biodiesel production, which are both environmentally and economically viable as compared to conventional homogeneous catalysts. The classification of catalysts into different categories based on a catalyst’s activity, feasibility, and lifetime is also briefly discussed. Furthermore, recommendations have been made for the most suitable catalyst (bifunctional catalyst) for low-cost oils to valuable biodiesel and the challenges faced by the biodiesel industry with some possible solutions.

Optimization of melon oil methyl ester production using response surface methodology

2017 ◽  
Vol 2 (1) ◽  
pp. 1-10 ◽  
Author(s):  
O. S. Aliozo ◽  
L. N. Emembolu ◽  
O. D. Onukwuli
Keyword(s):  
Response Surface Methodology ◽  
Reaction Time ◽  
Methyl Ester ◽  
Response Surface ◽  
Research Work ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Central Composite Designs ◽  
American Society

Abstract In this research work, melon oil was used as feedstock for methyl ester production. The research was aimed at optimizing the reaction conditions for methyl ester yield from the oil. Response surface methodology (RSM), based on a five level, four variable central composite designs (CCD)was used to optimize and statistically analyze the interaction effect of the process parameter during the biodiesel production processes. A total of 30 experiments were conducted to study the effect of methanol to oil molar ratio, catalyst weight, temperature and reaction time. The optimal yield of biodiesel from melon oil was found to be 94.9% under the following reaction conditions: catalyst weight - 0.8%, methanol to oil molar ratio - 6:1, temperature - 55°C and reaction time of 60mins. The quality of methyl ester produced at these conditions was within the American Society for Testing and Materials (ASTM D6751) specification.

Acidic Functionalized Nanobohemite: An Active Catalyst for Methyl Ester Production

2019 ◽  
Vol 17 (11) ◽  
Author(s):  
Shokoufe Hosseini ◽  
G. R. Moradi ◽  
Kiumars Bahrami
Keyword(s):  
Active Sites ◽  
Free Acid ◽  
Reaction Medium ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Optimal Point ◽  
Acidic Catalysts ◽  
Boehmite Nanoparticles ◽  
Optimized Conditions

Abstract In the biodiesel production, acidic catalysts are ideally suitable for reacting with different oil sources at various free acid levels. On the other hand, the nanocatalysts can easily be propagated in the reaction medium and provide more accessible active sites for reaction. The aim of this work was to synthesize an acidic nanocatalyst based on boehmite nanoparticles then studying it to biodiesel production from soybean oil. Up to now, no reports were found on biodiesel production by this catalyst. After the synthesis and characterization of the catalyst, using response surface methodology (RSM), the optimized conditions for transesterification were 4.87 wt.% for catalyst dosage, 13:1 for the molar ratio of methanol to oil, 60 °C for reaction temperature, and 3 h for reaction time. At the optimal point, the production yield was 99.8 %. After six consecutive use of the catalyst, the yield dropped slightly (88 %). Consequently, the catalyst can be employed efficiently several runs in the production process.

Biodiesel Production from Kapok (Ceiba pentandra) Seed Oil using Naturally Alkaline Catalyst as an Effort of Green Energy and Technology

2013 ◽  
Vol 2 (3) ◽  
pp. 169-173 ◽  
Author(s):  
N.A. Handayani ◽  
H. Santosa ◽  
M. Sofyan ◽  
I. Tanjung ◽  
A. Chyntia ◽  
...  
Keyword(s):  
Seed Oil ◽  
Green Energy ◽  
Green Technology ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Alkaline Catalyst ◽  
Biodiesel Feedstock ◽  
Presidential Decree ◽  
Near Future

Nowadays, energy that used to serve all the needs of community, mainly generated from fossil (conventional energy). Terrace in energy consumption is not balanced with adequate fossil fuel reserves and will be totally depleted in the near future. Indonesian Government through a Presidential Decree No. 5 year 2006 mandates an increased capacity in renewable energy production from 5 percent to 15 percent in 2025. C. pentandra seed oil has feasibility as a sustainable biodiesel feedstock in Indonesia. The aim of this paper was to investigate biodiesel production from ceiba petandra seed oil using naturally potassium hydroxide catalyst. Research designs are based on factorial design with 2 levels and 3 independent variables (temperature, reaction time and molar ratio of methanol to oil). According to data calculation, the most influential single variable is molar ratio of methanol to oil. Characterization of biodiesel products meet all the qualifications standardized by SNI 04-7182-2006. Keywords: biodiesel, kapok seed oil, c. pentandra, green technology

scholarly journals Turritella terebra Shell Synthesized Calcium Oxide Catalyst for Biodiesel Production from Chicken Fat

2020 ◽  
Vol 997 ◽  
pp. 93-101
Author(s):  
Mohd Nurfirdaus Mohiddin ◽  
A.A. Saleh ◽  
Amarnadh N.R. Reddy ◽  
Sinin Hamdan
Keyword(s):  
Reaction Time ◽  
Oxide Catalyst ◽  
Catalyst Concentration ◽  
Catalytic Performance ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Reaction Parameters ◽  
Renewable Source ◽  
Chicken Fat

Heterogeneous catalyst has been viewed as a promising catalyst for biodiesel production. This study employed Turritella terebra (TT) shell as a source for synthesizing heterogeneous CaO catalyst for biodiesel production via transesterification by utilizing chicken fat as a feedstock. The TT shell CaO catalyst was characterized and its catalytic performance was studied. The spectrographic methods that include FTIR, SEM, PSA, and BET-BJH were employed for characterization of the synthesized CaO. The TT shell CaO catalyst optimally produced chicken fat biodiesel (CFB) with reaction parameters at catalyst concentration of 4 wt%, chicken fat to methanol molar ratio of 1:12, reaction temperature of 60°C, and reaction time of 90 min. The optimal yield was 94.03% and the TT shell CaO catalyst still yield 79.19% of CFB on the fifth cycle of reaction. This study has implied that TT shell is a feasible and attractive renewable source of heterogeneous CaO catalyst for biodiesel production.

Sign in / Sign up

Export Citation Format

Share Document