scholarly journals Ultrasound Assisted Pretreatments Applied to Cupuaçu Husk (Theobroma grandiflorum) from Brazilian Legal Amazon for Biorefinery Concept

2022 ◽  
Author(s):  
Nicole Marasca ◽  
Isabella Cardoso ◽  
Magale Rambo ◽  
Daniel Bertuol ◽  
Michele Rambo ◽  
...  
Keyword(s):  
Native Species ◽  
Liquid Fraction ◽  
Value Added ◽  
X Ray Diffraction ◽  
X Ray ◽  
Aqueous Acid ◽  
Ultrasound Assisted ◽  
Hydrolysis Of ◽  
Pretreated Biomass ◽  
Value Added Products

Cupuaçu husk (CH) is the waste of a common fruit from a native species of the Brazilian Legal Amazon. The current study investigated the influence of ultrasound (US) combined with aqueous, acid, alkaline, and ionic liquid (IL) pretreatments on the chemical and physical aspects of CH and the yield of chemical platforms production, 5-hydroxymethylfurfural (HMF) and furfural (FF), using IL. Scanning electron microscopy, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy were used to feature the raw and pretreated biomass. The highest levels of glucose (9.90 g L-1) were observed in the liquid fraction resulting from the acid + US pretreatment followed by acid hydrolysis. The IL + US pretreatment recorded the best performance in removing lignin. Based on XRD analyses, ultrasound increased crystallinity of all pretreated samples as a result of the removal of cellulose’s amorphous fraction. However, it promoted accessibility to adopted reagents by increasing biomass exposure due to cavitation. The best yields of HMF and FF were recorded from hydrolysis of the solid fraction resulting from the acid + US (12.94%) and alkaline + US (48.84%) pretreatment, respectively. These results indicate satisfactory performance of ultrasound assisted pretreatments to the simplified and economic conversion of biomass into value-added products.

Identification of acid-insoluble filter-plugging compounds and optimal acid-washing procedures for tubular backpulse pressure filters

TAPPI Journal ◽  
2011 ◽  
Vol 10 (1) ◽  
pp. 17-23
Author(s):  
KEVIN TAYLOR ◽  
RICH ADDERLY ◽  
GAVIN BAXTER
Keyword(s):  
Calcium Sulfate ◽  
Membrane Filter ◽  
Sulfamic Acid ◽  
Xrd Analysis ◽  
Metal Sulfides ◽  
X Ray Diffraction ◽  
X Ray ◽  
Gypsum Formation ◽  
Acid Washing ◽  
Hydrolysis Of

Over time, performance of tubular backpulse pressure filters in kraft mills deteriorates, even with regular acid washing. Unscheduled filter replacement due to filter plugging results in significant costs and may result in mill downtime. We identified acid-insoluble filter-plugging materials by scanning electron microscope/energy-dispersion X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) analysis in both polypropylene and Gore-Tex™ membrane filter socks. The major filter-plugging components were calcium sulfate (gypsum), calcium phosphate (hydroxylapatite), aluminosilicate clays, metal sulfides, and carbon. We carried out detailed sample analysis of both the standard acid-washing procedure and a modified procedure. Filter plugging by gypsum and metal sulfides appeared to occur because of the acid-washing procedure. Gypsum formation on the filter resulted from significant hydrolysis of sulfamic acid solution at temperatures greater than 130°F. Modification of the acid-washing procedure greatly reduced the amount of gypsum and addition of a surfactant to the acid reduced wash time and mobilized some of the carbon from the filter. With surfactant, acid washing was 95% complete after 40 min.

Investigation of the products of carbothermal reduction of yttrium oxide by the hydrolysis method

1984 ◽  
Vol 49 (4) ◽  
pp. 936-943 ◽  
Author(s):  
Bohumil Hájek ◽  
Pavel Karen ◽  
Vlastimil Brožek
Keyword(s):  
Yttrium Oxide ◽  
Carbothermal Reduction ◽  
Stoichiometric Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrolysis Method ◽  
Sample Decomposition ◽  
Products Of Reaction ◽  
Hydrolysis Of ◽  
Lower Carbon

For the investigation of the products of reaction of yttrium oxide with carbon mixed in various proportions, the chemical and X-ray diffraction methods of analysis were combined with the gas chromatographic analysis of the mixture of hydrocarbons and hydrogen formed on the sample decomposition with water. The carboreduction of Y2O3 was examined at relatively low temperatures, convenient for obtaining the reaction intermediates in higher yields. At 1 600 °C and pressures of 10-3 Pa the reduction of a mixture of Y2O3 with carbon in a stoichiometric ratio of 1 : 7 yields YC2 in equilibrium with 20% of Y2OC phase. At lower carbon contents (down to the Y2O3 : C ratio of 1 : 2) tha fraction of the Y2OC phase increases up to approximately 30%. In addition to Y2O3, the reaction mixture contains also Y2C, Y2OC and a phase giving propyne on hydrolysis. The presence of traces of C3 hydrocarbons and small amounts of methane in the product of hydrolysis of the carbide sample prepared by the carbothermal reduction of the oxide can be explained in terms of the occurrence of the Y15C19 phase, probably substituted in part by oxygen, and of the Y2OC phase. The results are compared with those obtained previously for the Sc2O3 + C system.

Progress in ultrasound-assisted extraction of the value-added products from microorganisms

2021 ◽  
Vol 37 (4) ◽  
Author(s):  
Sijia Zheng ◽  
Guangming Zhang ◽  
HongJie Wang ◽  
Zeqing Long ◽  
Ting Wei ◽  
...  
Keyword(s):  
Value Added ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Value Added Products

scholarly journals Leaching of Chalcopyrite under Bacteria–Mineral Contact/Noncontact Leaching Model

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 230
Author(s):  
Pengcheng Ma ◽  
Hongying Yang ◽  
Zuochun Luan ◽  
Qifei Sun ◽  
Auwalu Ali ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Surface Passivation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Leaching Process ◽  
Copper Leaching ◽  
Hydrolysis Of ◽  
Leaching Efficiency ◽  
Leaching Models ◽  
Scanning Electron

Bacteria–mineral contact and noncontact leaching models coexist in the bioleaching process. In the present paper, dialysis bags were used to study the bioleaching process by separating the bacteria from the mineral, and the reasons for chalcopyrite surface passivation were discussed. The results show that the copper leaching efficiency of the bacteria–mineral contact model was higher than that of the bacteria–mineral noncontact model. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) were used to discover that the leaching process led to the formation of a sulfur film to inhibit the diffusion of reactive ions. In addition, the deposited jarosite on chalcopyrite surface was crystallized by the hydrolysis of the excess Fe3+ ions. The depositions passivated the chalcopyrite leaching process. The crystallized jarosite in the bacteria EPS layer belonged to bacteria–mineral contact leaching system, while that in the sulfur films belonged to the bacteria–mineral noncontact system.

47,49Ti NMR in Metals, Inorganics, and Gels

2000 ◽  
Vol 55 (1-2) ◽  
pp. 291-297 ◽  
Author(s):  
T. J. Bastow
Keyword(s):  
Solid State ◽  
Titanium Oxide ◽  
Recent Progress ◽  
Titanium Isopropoxide ◽  
Metallic State ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrolysis Of ◽  
C Nmr

Some recent progress in solid state 47,49Ti NMR is described and reviewed. The metallic-state work described covers metals such as hep titanium, TiB2 , a number of intermetallics such as TiAl2 and TiAl3· The inorganic work covers the various titanium oxide based materials including the TiO2 polymorphs, anatase, rutile and brookite. The gel work covers the evolution of crystalline titania from gels formed by hydrolysis of titanium isopropoxide. Some complementary data from 17O and 13C NMR and powder X-ray diffraction is also included.

Improved Enzymatic Depolymerization of Chitosan by Ionic Liquid Pretreatment and the Effect of Oligo-Chitosan on Intestinal Flora In Vitro

2011 ◽  
Vol 391-392 ◽  
pp. 1319-1323
Author(s):  
Cui Zheng ◽  
Lin Li ◽  
Hao Pang ◽  
Zhao Mei Wang ◽  
Na Li
Keyword(s):  
Ionic Liquid ◽  
Hydrogen Bonds ◽  
Molecular Hydrogen ◽  
Intestinal Flora ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrolysis Of ◽  
Positive Effect ◽  
Enzymatic Depolymerization

It still remains challenging for effective hydrolysis of chitosan into chitosan oligomers. In this work, a pretreatment was conducted on chitosan by an ionic liquid 1-butyl-3-methylimidazolium chloride ([C4mim]Cl), aiming at improving enzymatic depolymerization of chitosan. X-ray diffraction analysis indicated that the inter- and intra-molecular hydrogen bonds within chitosan molecules were broken by [C4mim]Cl and the crystalline was destroyed. The oligo-chitosan hydrolyzed from IL-pretreated chitosan, coded as COS-IL, showed a DP of 3~5, in contrast to DP 5~8 with oligo-chitosan obtained from untreated chitosan(coded as COS-UN). COS-IL was more effective than COS-UN in inhibiting intestinal spoilage bacterials growth and it has positive effect on the growth of intestinal probiotic bacterials.

Corrosion inhibition of N80 steel in 10% HCl + 8% HBF4solution

2019 ◽  
Vol 66 (1) ◽  
pp. 1-10
Author(s):  
Juan Du ◽  
Yuning He ◽  
Pingli Liu ◽  
Yigang Liu ◽  
Xianghai Meng ◽  
...  
Keyword(s):  
Corrosion Inhibition ◽  
Design Methodology ◽  
X Ray Diffraction ◽  
Corrosion Morphology ◽  
Content Type ◽  
X Ray ◽  
N80 Steel ◽  
Corrosion Reaction ◽  
Hydrolysis Of ◽  
Scanning Electron

PurposeThis paper aims to analyze the corrosion and corrosion inhibition of N80 in 10 per cent HCl + 8 per cent fluoroboric acid (HBF4) solution for acidizing operation.Design/methodology/approachThe corrosion rate, kinetic parameters (Ea, A) and thermodynamic parameters (ΔH, ΔS) of N80 steel in fresh acid and spent acid, 10 per cent HCl + 8 per cent HBF4, 10 per cent HCl and 8 per cent HBF4solutions were calculated through immersion tests. The corrosion and inhibition properties were studied through X-ray diffraction and electrochemical measurements. The corrosion morphology of the corrosion product was examined by scanning electron microscopy (SEM).FindingsThe results demonstrated that the spent acid was the main cause of acidification corrosion, and the HBF4would cause serious corrosion to N80 steel. The results showed that the N80 steel was more seriously corroded in the spent acid than in fresh acid, and the hydrolysis of HBF4accelerates the dissolution process of N80 steel anode to control the corrosion reaction. The results showed that the acidification will definitely cause serious corrosion to the oil tube; therefore, necessary anti-corrosion measures must be taken in the acidification process.Originality/valueThe results showed that acidizing the formation with 10 per cent HCl + 8 per cent HBF4will definitely cause serious corrosion to the oil tube, especially when the spent acid flows back. Therefore, necessary anti-corrosion measures must be taken in the acidification process, especially in the spent acid flowback stage.

scholarly journals One-Pot Ionic Liquid-Mediated Bioprocess for Pretreatment and Enzymatic Hydrolysis of Rice Straw with Ionic Liquid-Tolerance Bacterial Cellulase

2022 ◽  
Vol 9 (1) ◽  
pp. 17
Author(s):  
Malinee Sriariyanun ◽  
Nichaphat Kitiborwornkul ◽  
Prapakorn Tantayotai ◽  
Kittipong Rattanaporn ◽  
Pau-Loke Show
Keyword(s):  
Ionic Liquid ◽  
Saline Soil ◽  
Enzymatic Saccharification ◽  
Value Added ◽  
Specific Enzyme ◽  
One Pot ◽  
The One ◽  
Hydrolysis Of ◽  
Bacterial Cellulase ◽  
Value Added Products

Ionic liquid (IL) pretreatment of lignocellulose is an efficient method for the enhancement of enzymatic saccharification. However, the remaining residues of ILs deactivate cellulase, therefore making intensive biomass washing after pretreatment necessary. This study aimed to develop the one-pot process combining IL pretreatment and enzymatic saccharification by using low-toxic choline acetate ([Ch][OAc]) and IL-tolerant bacterial cellulases. Crude cellulases produced from saline soil inhabited Bacillus sp. CBD2 and Brevibacillus sp. CBD3 were tested under the influence of 0.5–2.0 M [Ch][OAc], which showed that their activities retained at more than 95%. However, [Ch][OAc] had toxicity to CBD2 and CBD3 cultures, in which only 32.85% and 12.88% were alive at 0.5 M [Ch][OAc]. Based on the specific enzyme activities, the sugar amounts produced from one-pot processes using 1 mg of CBD2 and CBD3 were higher than that of Celluclast 1.5 L by 2.0 and 4.5 times, respectively, suggesting their potential for further application in the biorefining process of value-added products.

Sign in / Sign up

Export Citation Format

Share Document