Using Examination Methods and EDX Analysis to Study the Archaeological Vitreous Enamels

2021 ◽  
Vol 2 (2) ◽  
pp. 25-34
Author(s):  
Wafaa Anwer ◽  
Niazy Mostafa
1913 ◽  
Vol 10 (6) ◽  
pp. 250-250
Author(s):  
F. M., Jr. Barnes
Keyword(s):  

Author(s):  
Ihab Nabeel Safi ◽  
Basima Mohammed Ali Hussein ◽  
Hikmat J. Aljudy ◽  
Mustafa S. Tukmachi

Abstract Objectives Dental implant is a revolution in dentistry; some shortages are still a focus of research. This study use long duration of radiofrequency (RF)–magnetron sputtering to coat titanium (Ti) implant with hydroxyapatite (HA) to obtain a uniform, strongly adhered in a few micrometers in thickness. Materials and Methods Two types of substrates: discs and root form cylinders were prepared using a grade 1 commercially pure (CP) Ti rod. A RF–magnetron sputtering device was used to coat specimens with HA. Magnetron sputtering was set at 150 W for 22 hours at 100°C under continuous argon gas flow and substrate rotation at 10 rpm. Coat properties were evaluated via field emission scanning electron microscopy (FESEM), scanning electron microscopy–energy dispersive X-ray (EDX) analysis, atomic force microscopy, and Vickers hardness (VH). Student’s t-test was used. Results All FESEM images showed a homogeneous, continuous, and crack-free HA coat with a rough surface. EDX analysis revealed inclusion of HA particles within the substrate surface in a calcium (Ca)/phosphorus (P) ratio (16.58/11.31) close to that of HA. Elemental and EDX analyses showed Ca, Ti, P, and oxygen within Ti. The FESEM views at a cross-section of the substrate showed an average of 7 µm coat thickness. Moreover, these images revealed a dense, compact, and uniform continuous adhesion between the coat layer and the substrate. Roughness result indicated highly significant difference between uncoated Ti and HA coat (p-value < 0.05). A significant improvement in the VH value was observed when coat hardness was compared with the Ti substrate hardness (p-value < 0.05). Conclusion Prolonged magnetron sputtering successfully coat Ti dental implants with HA in micrometers thickness which is well adhered essentially in excellent osseointegration.


2021 ◽  
pp. 192536212110025
Author(s):  
Daniel Asen

Modern forensic medicine was introduced into China during the first decades of the 20th century. The members of China’s first generation of medicolegal experts were soon advocating that medical expertise play a greater role in police and judicial officials’ investigations of suspicious death and homicide cases. While forensic reform in China had parallels with developments in other contemporary societies in which physicians were pushing for a greater role in the law, this process unfolded in China in unique ways, against the backdrop of an older tradition of forensic science that had developed under the Qing dynasty (1644-1911). Central to this tradition was the Records on the Washing Away of Wrongs, a handbook of forensic practice that was written in the 13th century and saw numerous editions and expansions over subsequent centuries. Death investigation in early 20th-century China was defined by “forensic pluralism,” a situation in which the different body examination methods and standards of forensic proof associated with the Washing Away of Wrongs and modern forensic medicine were both accepted by officialdom and society. This article untangles the complexities of forensic practice during this period through the rather unexceptional exchange over a case of suspected drowning that occurred between local officials in Hebei province and Lin Ji (1897-1951), director of the Beiping University Medical School Institute of Legal Medicine. This case reveals the different regimes of forensic knowledge and practice that were used in China during this period as well as the sites at which they interacted.


Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 126
Author(s):  
Viktoria Hoppe ◽  
Patrycja Szymczyk-Ziółkowska ◽  
Małgorzata Rusińska ◽  
Bogdan Dybała ◽  
Dominik Poradowski ◽  
...  

The purpose of this work is to obtain comprehensive reference data of the Ti-13Nb-13Zr alloy base material: its microstructure, mechanical, and physicochemical properties. In order to obtain extensive information on the tested materials, a number of examination methods were used, including SEM, XRD, and XPS to determine the phases occurring in the material, while mechanical properties were verified with static tensile, compression, and bending tests. Moreover, the alloy’s corrosion resistance in Ringer’s solution and the cytotoxicity were investigated using the MTT test. Studies have shown that this alloy has the structure α’, α, and β phases, indicating that parts of the β phase transformed to α’, which was confirmed by mechanical properties and the shape of fractures. Due to the good mechanical properties (E = 84.1 GPa), high corrosion resistance, as well as the lack of cytotoxicity on MC3T3 and NHDF cells, this alloy meets the requirements for medical implant materials. Ti-13Nb-13Zr alloy can be successfully used in implants, including bone tissue engineering products and dental applications.


Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4089
Author(s):  
Cristina Modrogan ◽  
Simona Cǎprǎrescu ◽  
Annette Madelene Dǎncilǎ ◽  
Oanamari Daniela Orbuleț ◽  
Eugeniu Vasile ◽  
...  

Magnesium–aluminum (Mg-Al) and magnesium–aluminum–nickel (Mg-Al-Ni) layered double hydroxides (LDHs) were synthesized by the co-precipitation method. The adsorption process of Mn2+ from synthetic wastewater was investigated. Formation of the layered double hydroxides and adsorption of Mn2+ on both Mg-Al and Mg-Ni-Al LDHs were observed by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectrometry (EDX) analysis. XRD patterns for prepared LDHs presented sharp and symmetrical peaks. SEM studies revealed that Mg-Al LDH and Mg-Al-Ni LDH exhibit a non-porous structure. EDX analysis showed that the prepared LDHs present uniformly spread elements. The adsorption equilibrium on these LDHs was investigated at different experimental conditions such as: Shaking time, initial Mn2+ concentration, and temperatures (10 and 20 °C). The parameters were controlled and optimized to remove the Mn2+ from synthetic wastewater. Adsorption isotherms of Mn2+ were fitted by Langmuir and Freundlich models. The obtained results indicated that the isotherm data fitted better into the Freundlich model than the Langmuir model. Adsorption capacity of Mn2+ gradually increased with temperature. The Langmuir constant (KL) value of Mg-Al LDH (0.9529 ± 0.007 L/mg) was higher than Mg-Al-Ni LDH (0.1819 ± 0.004 L/mg), at 20 °C. The final adsorption capacity was higher for Mg-Al LDH (91.85 ± 0.087%) in comparison with Mg-Al-Ni LDH (35.97 ± 0.093%), at 20 °C. It was found that the adsorption kinetics is best described by the pseudo-second-order model. The results indicated that LDHs can be considered as a potential material for adsorption of other metallic ions from wastewater.


Author(s):  
Jiaqi Zhao ◽  
Yi Zhou ◽  
Jiafeng Wang ◽  
Chong Zhang ◽  
Zhuhong Cai

Abstract From June 28 to November 22, 2018, the Chinese People’s Liberation Army Navy – PLA(N) – Peace Ark hospital ship had conducted Mission Harmony 2018, providing humanitarian medical assistance and carrying out international cooperation, in 4 Pacific island countries and 6 Central and South American countries. Compared with its application only in onshore outreach medical teams in the previous Mission Harmony, portable ultrasonography was used both onboard and onshore in Mission Harmony 2018. The purpose of this study was to assess the performance of onboard portable ultrasonography in PLA(N) Peace Ark hospital ship during Mission Harmony-2018, share our onboard working experience, and provide a reference for humanitarian assistance missions in the future. A retrospective review was performed on a cohort of patients checked by onboard portable ultrasonography. Patients’ gender, age, the distribution of examined organs, and multiple applications of the portable ultrasonography were analyzed. Some limitations of portable ultrasonography on the mission and possible improvements in the future were also discussed. A total of 5277 cases (mean age: 43.74 years; range: 2 months–105 years) of ultrasound examinations were performed during the mission; among them, 3126 (59.2%) cases were performed by portable ultrasonography, including 3024 onboard cases and 102 onshore cases. The portable ultrasonography had been applied in many scenarios, for example, onboard emergency triage process, onboard bedside medical support, and onshore outreach medical service, which had become one of the indispensable auxiliary examination methods for its compatibility, portability, and flexibility. The onboard deployment of portable ultrasonography played a versatile and irreplaceable role in the humanitarian medical assistance and medical cooperation carried out by the PLA(N) Peace Ark hospital ship, and will contribute to such kind of missions in the future.


1980 ◽  
Vol 58 (6) ◽  
pp. 699-711 ◽  
Author(s):  
Ernest Spitzer ◽  
John N. A. Lott

Protein bodies of dry seeds of tomato (Lycopersicon esculentum) from radicle, hypocotyl, cotyledon, and endosperm tissue were extensively studied using thin-sectioning, freeze-fracturing and energy dispersive x-ray (EDX) analysis. Protein bodies varied in size, were oval to circular in section, and generally consisted of a proteinaceous matrix, globoid crystal, and protein crystalloid components. Size, shape, and arrangements of globoid crystals and protein crystalloids varied even within the same cell. Globoid crystals were generally oval to circular in section. They were always surrounded by a proteinaceous matrix. In a given protein body the number present ranged from a few to numerous. A protein body generally contained only one protein crystalloid. In section, protein crystalloids were irregular or angular in shape. They were composed of substructural particles which formed lattice planes. EDX analysis of tomato seed globoid crystals revealed the presence of P, K, and Mg in all cases, a fact that is consistent with globoid crystals being phytin-rich. Rarely, small amounts of calcium were found along with P, K, and Mg in globoid crystals of each of the tissue regions considered. The distribution pattern of cells with Ca containing globoid crystals was random. Small amounts of Fe and Mn were also found in the globoid crystals of protein bodies from certain cell types. These two elements, unlike calcium, were specific in terms of their distribution. Globoid crystals from the protodermal cells often contained Mn and Fe. The globoid crystals from provascular tissue of radicle, hypocotyl, and cotyledon regions often contained Fe while globoid crystals in the first layer of large cells surrounding these provascular areas always contained Fe. Results from EDX analysis of the proteinaceous material from the protein bodies are presented and discussed as are variations in elemental content due to different fixations.


Sign in / Sign up

Export Citation Format

Share Document