Selecting Sanitation Solutions for Peri-urban Areas: A Case Study of Can Tho, Vietnam

2010 ◽  
Vol 5 (4) ◽  
Author(s):  
Naomi Carrard ◽  
Juliet Willetts ◽  
Cynthia Mitchell ◽  
Mick Paddon ◽  
Monique Retamal
Keyword(s):  
Urban Areas ◽  
Cost Effective ◽  
Asset Replacement ◽  
Fit For Purpose ◽  
Infrastructure Investments ◽  
Sanitation Systems ◽  
Can Tho City ◽  
Sustainable Futures ◽  
Sanitation Infrastructure ◽  
Selection Of

In peri-urban areas where infrastructure investments have not yet been made, there is a need to determine the most context-appropriate, fit for purpose and sustainable sanitation solutions. Decision makers must identify the optimal system scale (on the spectrum from centralized to community to cluster scale) and assess the long-term costs and socio-economic/environmental impacts associated with different options. Addressing both cost-effectiveness and sustainability are essential to ensure that institutions and communities are able to continue to bear the costs and management burden of infrastructure operation, maintenance and asset replacement. This paper describes an approach to sanitation planning currently being undertaken as a research study in Can Tho City in southern Vietnam, by the Institute for Sustainable Futures and Can Tho University in collaboration with Can Tho Water Supply and Sewerage Company. The aim of the study is to facilitate selection of the most context-appropriate, fit for purpose, cost effective and sustainable sanitation infrastructure solution. As such, the study compares a range of sanitation alternatives including centralized, decentralized (at household or cluster scale) and resource recovery options. This paper provides an overview of the study and considers aspects of the Can Tho and Vietnamese regulatory, development and institutional context that present drivers and challenges for comparison of options and selection of fit for purpose sanitation systems.

Ancient water and sanitation systems – applicability for the contemporary urban developing world

2013 ◽  
Vol 67 (5) ◽  
pp. 935-941 ◽  
Author(s):  
T. Bond ◽  
E. Roma ◽  
K. M. Foxon ◽  
M. R. Templeton ◽  
C. A. Buckley
Keyword(s):  
Urban Areas ◽  
Developing World ◽  
Focal Point ◽  
Cost Effective ◽  
Ancient Rome ◽  
Water And Sanitation ◽  
Rural Agriculture ◽  
Potential Applications ◽  
Improved Sanitation ◽  
Sanitation Systems

The idea of implementing ancient water and wastewater technologies in the developing world is a persuasive one, since ancient systems had many features which would constitute sustainable and decentralised water and sanitation (WATSAN) provision in contemporary terminology. Latest figures indicate 2.6 billion people do not use improved sanitation and 1.1 billion practise open defecation, thus there is a huge need for sustainable and cost-effective WATSAN facilities, particularly in cities of the developing world. The objective of this study was to discuss and evaluate the applicability of selected ancient WATSAN systems for the contemporary developing world. Selected WATSAN systems in ancient Mesopotamia, the Indus Valley, Egypt, Greece, Rome and the Yucatan peninsula are briefly introduced and then discussed in the context of the developing world. One relevant aspect is that public latrines and baths were not only a part of daily life in ancient Rome but also a focal point for socialising. As such they would appear to represent a model of how to promote use and acceptance of modern community toilets and ablution blocks. Although public or community toilets are not classified as improved sanitation by WHO/UNICEF, this is a debatable premise since examples such as Durban, South Africa, illustrate how community toilets continue to represent a WATSAN solution for urban areas with high population density. Meanwhile, given the need for dry sanitation technologies, toilets based on the production of enriched Terra Preta soil have potential applications in urban and rural agriculture and warrant further investigation.

scholarly journals Optimization of hydrometric monitoring network in urban drainage systems using information theory

2017 ◽  
Vol 76 (7) ◽  
pp. 1603-1613 ◽  
Author(s):  
J. Yazdi
Keyword(s):  
Urban Areas ◽  
Numerical Models ◽  
Monitoring Network ◽  
Cost Effective ◽  
Decision Makers ◽  
Modeling Framework ◽  
Optimal Monitoring ◽  
Shared Information ◽  
The Cost ◽  
Selection Of

Regular and continuous monitoring of urban runoff in both quality and quantity aspects is of great importance for controlling and managing surface runoff. Due to the considerable costs of establishing new gauges, optimization of the monitoring network is essential. This research proposes an approach for site selection of new discharge stations in urban areas, based on entropy theory in conjunction with multi-objective optimization tools and numerical models. The modeling framework provides an optimal trade-off between the maximum possible information content and the minimum shared information among stations. This approach was applied to the main surface-water collection system in Tehran to determine new optimal monitoring points under the cost considerations. Experimental results on this drainage network show that the obtained cost-effective designs noticeably outperform the consulting engineers’ proposal in terms of both information contents and shared information. The research also determined the highly frequent sites at the Pareto front which might be important for decision makers to give a priority for gauge installation on those locations of the network.

Solution of Two-Echelon Facility Location Problems by Approximation Methods

2017 ◽  
Vol 2610 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Mahyar Jahangiriesmaili ◽  
Sina Bahrami ◽  
Matthew J. Roorda
Keyword(s):  
Urban Areas ◽  
Transportation Cost ◽  
Cost Effective ◽  
Optimal Number ◽  
Approximation Techniques ◽  
Delivery Costs ◽  
Last Mile ◽  
Selection Of ◽  
Center Potential

The two-echelon delivery structure is a strategy that can be implemented in urban areas to lower delivery costs by reducing the movement of heavy goods vehicles. In a two-echelon delivery structure, large trucks deliver shipments from a consolidation center to several terminals, where packages are transferred to smaller trucks for last-mile deliveries. This paper formulates a model that solves the two-echelon delivery structure by the use of approximation techniques. Several potential terminal locations and demand areas were identified, and the optimal number and locations of the terminals were examined, as the model evaluated the most cost-effective routes between the consolidation center, potential terminals, and demand areas. Downtown Toronto, Ontario, Canada, was chosen as the case study area to assess the model, and a cost analysis of the number and locations of the terminals was performed. The experiments showed that the number and the locations of the terminals were greatly influenced by the opening cost of the terminals and the transportation cost of the delivery trucks. It was also discovered that the likelihood of selection of terminals that were positioned near both the consolidation center and the center of the service area was higher than the likelihood of selection of terminals at any other location.

Sustainable sewerage servicing options for peri-urban areas with failing septic systems

2010 ◽  
Vol 62 (3) ◽  
pp. 570-585 ◽  
Author(s):  
A. K. Sharma ◽  
G. Tjandraatmadja ◽  
A. L. Grant ◽  
T. Grant ◽  
F. Pamminger
Keyword(s):  
Rural Community ◽  
Urban Areas ◽  
Septic Systems ◽  
Environmental Implications ◽  
Sustainable Solutions ◽  
Fit For Purpose ◽  
Water And Wastewater ◽  
Reuse Options ◽  
Selection Of

The provision of water and wastewater services to peri-urban areas faces very different challenges to providing services to cities. Sustainable solutions for such areas are increasingly being sought, in order to solve the environmental and health risks posed by failing septic systems. These solutions should have the capability to reduce potable water demand, provide fit for purpose reuse options, and minimise impacts on the local and global environment. A methodology for the selection of sustainable sewerage servicing systems and technologies is presented in this paper. This paper describes the outcomes of applying this methodology to a case study in rural community near Melbourne, Australia, and describes the economic and environmental implications of various sewerage servicing options. Applying this methodology has found that it is possible to deliver environmental improvements at a lower community cost, by choosing servicing configurations not historically used by urban water utilities. The selected solution is currently being implemented, with the aim being to generate further transferable learnings for the water industry.

scholarly journals Challenges of Governing Off-Grid “Productive” Sanitation in Peri-Urban Areas: Comparison of Case Studies in Bolivia and South Africa

2019 ◽  
Vol 11 (12) ◽  
pp. 3468 ◽  
Author(s):  
Denise Silveti ◽  
Kim Andersson
Keyword(s):  
South Africa ◽  
Urban Areas ◽  
Cost Effective ◽  
Economic Benefits ◽  
Infrastructure Development ◽  
Rapid Urbanization ◽  
Municipal Policies ◽  
Urban Settlements ◽  
Basic Sanitation ◽  
Sanitation Systems

Globally, peri-urban areas are experiencing rapid urbanization. Conventional infrastructure development is generally slow to catch up and the lack of basic sanitation in peri-urban areas is a constantly growing—and often overlooked—problem. There are examples where these challenges have been addressed by off-grid “productive” sanitation systems that provide opportunities for recovery and reuse of valuable waste stream resources. However, governing such systems and ensuring effective municipal policies can be challenging since the socio-economic contexts in many peri-urban areas are transforming rapidly. A comparison of two initiatives in Bolivia and South Africa offers valuable insights for introducing functional off-grid “productive” sanitation systems relying on urine-diverting dry toilets (UDDTs) in peri-urban settlements. Findings suggest that acceptance of the UDDTs by households largely rely on consistent awareness raising and capacity building, in addition to adaptation to the local needs and creating a sense of ownership over the toilet system. Changing perceptions of what constitutes an aspirational toilet, and developing services for waste management collection, seem to be crucial components for ensuring long-term use and functionality of the UDDTs. Investments and further innovations for upscaling of resource recovery systems are needed to make these systems cost-effective and logistically viable. To attract these additional investments, it will be crucial to assess the societal economic benefits of off-grid “productive” sanitation compared to centralized wastewater systems. The comparison also highlights that off-grid sanitation requires a clear division and coordination of roles and responsibilities among different authorities, in order to transcend political difficulties that emerge where these boundaries overlap. Thus, integrating clear boundaries into urban planning policies, and including informal processes in communities, play an important role in improving governance of basic services in peri-urban areas.

Medical Literature Searches -How Many Bibliographic Databases are Needed for Sufficient Retrieval in Medical Topics?

1985 ◽  
Vol 24 (03) ◽  
pp. 163-165 ◽  
Author(s):  
K. John
Keyword(s):  
Medical Literature ◽  
Cost Effective ◽  
Medical Faculty ◽  
Bibliographic Databases ◽  
Literature Searches ◽  
Selection Of

SummaryAs many bibliographic services in medicine are offered, literature searches in eight databases at DIMDI were performed to find out which database is most important in medicine. The distribution of publications from members of the medical faculty of Frankfurt University was examined. No save prediction is possible as to which database will yield most articles. Overlapping from different databases is often rather low. The selection of an appropriate database mix for sufficient recall and in a cost-effective manner.is a task for an experienced searcher.

Spatial Autocorrelation in the Study of Neighbourhoods towards Smart Cities: Empirical Evidence from Kerman, Iran

2012 ◽  
Vol 9 (2) ◽  
pp. 1
Author(s):  
Asra Hosseini
Keyword(s):  
Spatial Autocorrelation ◽  
Urban Areas ◽  
Smart Cities ◽  
Moran’S I ◽  
Moran's I ◽  
Urban Planner ◽  
Universal Feature ◽  
Autocorrelation Method ◽  
Selection Of

From earliest cities to the present, spatial division into residential zones and neighbourhoods is the universal feature of urban areas. This study explored issue of measuring neighbourhoods through spatial autocorrelation method based on Moran's I index in respect of achieving to best neighbourhoods' model for forming cities smarter. The research carried out by selection of 35 neighbourhoods only within central part of traditional city of Kerman in Iran. The results illustrate, 75% of neighbourhoods' area in the inner city of Kerman had clustered pattern, and it shows reduction in Moran's index is associated with disproportional distribution of density and increasing in Moran's I and Z-score have monotonic relation with more dense areas and clustered pattern. It may be more efficient for urban planner to focus on spatial autocorrelation to foster neighbourhood cohesion rather than emphasis on suburban area. It is recommended characteristics of historic neighbourhoods can be successfully linked to redevelopment plans toward making city smarter, and also people's quality of life can be related to the way that neighbourhoods' patterns are defined. 

Teknologi Esktrasi dan Cara Pemisahannya untuk Mendapatkan Kembali Karotenoid dari Minyak Sawit : Suatu Tinjauan

2016 ◽  
Vol 9 (1) ◽  
pp. 80-95
Author(s):  
Agus Sudibyo ◽  
Sardjono Sardjono
Keyword(s):  
Vitamin A ◽  
Palm Oil ◽  
Beta Carotene ◽  
Cost Effective ◽  
Raw Material ◽  
Extraction And Separation ◽  
Molecular Product ◽  
Industrial Use ◽  
Palm Oil Mill ◽  
Selection Of

Crude palm oil (CPO)is the richest natural plant source of carotenoids in terms of retinol (pro-vitamin A) equivalent, whereas palm oil mill effluent (POME) is generated from palm oil industry that contains oil and carotenes that used to be treated before discharge. Carotenoids are importance in animals and humans for the purpose of the enhancement of immune response, conversion of vitamin A and scavenging of oxygen radicals. This component has different nutritional  functions and benefits to humaan health. The growing interest in the other natural sources of beta-carotene and growing awareness to prevent pollution has stimulated the industrial use of CPO and POME as a raw material for carotenoids extraction. Various technologies of extraction and separation have been developed in order to recover of carotenoids.This article reports on various technologies that have been developed in order to recover of carotenoids from being destroyed in commercial refining of palm oil and effects of some various treatments on the extraction end separation for carotenoid from palm oil and carotenoids concentration. Principally, there are different technologies, and there is one some future which is the use of solvent. Solvent plays important role  in the most technologiest, however the problem of solvents which are used is that they posses potentiaal fire health and environmental hazards. Hence selection of the  most safe, environmentally friendly and cost effective solvent is important to design of alternative extraction methods.Chemical molecular product design is one of the methods that are becoming more popular nowadays for finding solvent with the desired properties prior to experimental testing.ABSTRAKMinyak sawit kasar merupakan sumber karotenoid terkaya yang berasal dari tanaman sawit sebagai senyawa yang sama dengan retinol atau pro-vitamin A; sedangkan limbah pengolahan minyak sawit dihasilkan dari industri pengolahan minyak sawit yang berisi minyak dan karotene yang perlu diberi perlakuan terlebih dahulu sebelum dibuang. Karotenoid merupakan bahan penting yang diperlukan pada hewan dan manusia guna memperkuat tanggapan terhadap kekebalan, konversi ke vitamin A dan penangkapan gugus oksigen radikal. Dengan berkembangnya ketertarikan dalam mencari beta-karotene yang bersumber dari alam lain dan meningkatnya kesadaran untuk mencegah adanya pencemaran lingkungan, maka mendorong suatu industri untuk menggunakan CPO dan POME sebagai bahan baku untuk diekstrak karotenoidnya. Berbagai macam teknologi guna mengekstrak dan memisahkan karotenoid telah dikembangkan untuk mendapatkan kembali karotenoidnya. Makalah ini melaporkan dan membahas berbagai jenis teknologi yang telah dikembangkan guna mendapatkan kembali senyawa karotenoid dari kerusakan di dalam proses pemurnian minyak sawit secara komersial dan pengaruh beberapa perlakuan terhadap ekstrasi dan pemisahan karotenoid dari minyak sawit dan konsentrasi karotenoidnya. Pada prinsipnya, berbagai teknologi yang digunakan untuk mengekstrak dan memisahkan karotenoid terdapat perbedaan, dan terdapat salah satu teknologi yang digunakan untuk esktrasi dan pemisahan karotenoid adalah menggunakan bahan pelarut. Pelarut yang digunakan mempunyai peranan yang penting dalam teknologi ekstrasi; namun pelarut yang digunakan untuk mengekstrak tersebut mempunyai persoalan karena berpotensi mengganggu kesehatan dan membahayakan cemaran lingkungan. Oleh karena itu, pemilihan jenis teknologi yang aman, ramah terhadap lingkungan dan biaya yang efektif untuk penggunaan pelarut merupakan hal penting sebelum dilakukan desain metode/teknologi alternatif untuk esktrasi karotenoid. Pola produk molekuler kimia merupakan salah satu metode yang saat ini menjadi lebih populer untuk mencari pelarut dengan sifat-sifat yang dikehendaki sebelum diujicobakan. Kata kunci :    karotenoid, ekstrasi, pemisahan, teknologi, minyak sawit kasar, limbah industri pengolahan sawit.

Ecosan Can Provide Sustainable Sanitation in Emergency Situations with Benefits for the Millennium Development Goals

2006 ◽  
Vol 1 (2) ◽  
Author(s):  
E. v. Münch ◽  
G. Amy ◽  
J. F. Fesselet
Keyword(s):  
Low Income ◽  
Urban Areas ◽  
Millennium Development Goals ◽  
Net Present Value ◽  
Soil Conditions ◽  
Value Analysis ◽  
Emergency Situations ◽  
Long Time ◽  
Development Goals ◽  
Sanitation Systems

This paper describes the potential of ecological sanitation (ecosan) to provide sustainable excreta disposal in emergency situations and in peri-urban areas or slums in developing countries. At the present time, pit latrines are the most common form of excreta disposal both for emergency situations and in low-income peri-urban areas or slums. Although not intended to be a long-term solution, pit latrines provided during emergencies are often used for a long time (more than six months to years). This practice is not sustainable if the area is prone to flooding or there are soil conditions that allow groundwater pollution in areas where groundwater is used for drinking water, to name but two of the main factors. We propose eight criteria for the applicability of ecosan based on analysis of three case studies representing different types of emergency situations. The two most important criteria are awareness and expertise in ecosan within the aid agencies, and availability of standardised, lightweight toilet units that are quick to assemble and easy to transport (e.g. container for faeces, and urine diversion squatting pan made of impact-resistant molded polypropylene). Such toilets could be moved to, or replicated in, other areas in need after the emergency (peri-urban areas or slums). This would provide benefits for Millennium Development Goals achievements (targets on hunger, child mortality, sanitation and slum dwellers) at lower cost than conventional sanitation systems. Costs for sanitation systems should be compared based on the entire system (toilet, transport, treatment, reuse in agriculture), using Net Present Value analysis for capital, and operating and maintenance costs.

scholarly journals Design Considerations and Selection of Cost-Effective Switched Reluctance Drive for Radiator Cooling Fans

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 917
Author(s):  
Ickjin Son ◽  
Grace Firsta Lukman ◽  
Mazahir Hussain Shah ◽  
Kwang-Il Jeong ◽  
Jin-Woo Ahn
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Magnetic Characteristics ◽  
Switched Reluctance Motors ◽  
Switched Reluctance ◽  
Design Considerations ◽  
Cooling Fan ◽  
Cooling Fans ◽  
Power Switches ◽  
Selection Of

Switched reluctance motors (SRMs) are simple in structure, easy to manufacture, magnet-less, brushless, and highly robust compared to other AC motors which makes them a good option for applications that operate in harsh environment. However, the motor has non-linear magnetic characteristics, and it comes with various pole-phase combinations and circuit topologies that causes many difficulties in deciding on which type to choose. In this paper, the viability of SRM as a low-cost, rugged machine for vehicle radiator cooling fan is considered. First, necessary design considerations are presented, then three commonly use types of SRM are analyzed: A 3-phase 6/4, 3-phase 12/8, and a 4-phase 8/6 to find their static and dynamic characteristics so the most suitable type can be selected. Simulation results show that the 8/6 SRM produces the highest efficiency with less phase current which reduces the converter burden. However, with asymmetric half bridge converter, eight power switches are required for 8/6 SRM and thus put a burden on the overall drive cost. As a solution, the Miller converter with only six switches for four phase SRM. To verify the proposed idea, the 8/6 SRM was manufactured and tested. The results show that Miller converter can be used for the proposed SRM with slightly reduced efficiency at 80.4%.

Sign in / Sign up

Export Citation Format

Share Document