Soil Colour and Plant-Wax Markers: Application in Forensic Investigations under Urban Subtropical Environments

Most cases involving soil in criminal investigations in Brazil have focused on the chemical and mineralogical analyses of soil fractions without including the organic matter. The organic fraction contains plant-wax markers which may be useful to “fingerprint” forensic soils due to their chemical diversity, relative longevity and resistant nature. The aim of this study was to test the long- (kilometre), medium- (metre) and short- (centimetre) scale variability of plant-wax biomarkers in a forensic context in anthropised urban soils and soils developed under subtropical conditions. Two areas from the Curitiba municipality and two areas from the Colombo municipality, Paraná State, South Brazil, were selected. Soil colour analysis was carried out to obtain reflectance data over the 360–740 nm wavelength range. Furthermore, plant-wax marker compounds (n-alkanes and fatty-alcohols) were assessed by extraction and separation into different classes and an analysis of the compounds by gas chromatography (GC/MS). The compositions of the wax-marker profiles were different in samples collected side-by-side, showing sensitivity to local variations under subtropical conditions and in areas under intense human urban disturbance. Under these conditions, biomarkers may be used in real crime scenes, even on a micrometric scale of variation.

Ionic Liquids as Components of Systems for Metal Extraction

This review addresses research and development on the use of ionic liquids as extractants and diluents in the solvent extraction of metals. Primary attention is given to the efficiency and selectivity of metal extraction from industrial wastewater with ionic liquids composed of various cations and anions. The review covers literature sources published in the period of 2010–2021. The bibliography includes 98 references dedicated to research on the extraction and separation of lanthanides (17 sources), actinides (5 sources), heavy metals (35 sources), noble metals, including the platinum group (16 sources), and some other metals.

Isolation of Alkaloids from Papaver rhoeas (Papaveraceae) Wildly Grown in Iraq

The plant Papaver rhoeas ,which belongs to family Papaveraceae and known as common poppy is wildly grown in Iraq .It was used in traditional medicine in wide range of diseases including inflammation, diarrhea, sleep disorders, treatment of cough, analgesia, and also to reduce the withdrawal signs of opioid addiction. The project provide the first comprehensive research done in Iraq to study the phytochemical and the methods of extraction and separation of alkaloids from Papaver rhoeas wildly grown in Iraq .The plant was harvested in April 2019 from Zurbatiya is an Iraqi town located at the northeast of Waist province in Iraq.The collected plant was washed thoroughly, dries under shade, and grounding in a mechanical grinder to fine powder. The plant was extracted by hot extraction method using Methanol then fractionation was done to separate alkaloids from chloroform Fraction by TLC and PTLC .The alkaloids were isolated and purified by PTLC then subjected to various analytical techniques for alkaloids identification such as UV, LC mass and IR .The result was indicated of three alkaloids (dihydrocodien, chelidonine and papaverrubine C) in Papaver rhoeas plant.

Solvent Extraction of Lanthanides(III) in the Presence of the Acetate Ion Acting as a Complexing Agent Using Mixtures of Cyanex 272 and Caprylic Acid in Hexane

A new extraction system containing a mixture of Cyanex 272 and caprylic acid is proposed for the extraction and separation of lanthanides(III). It was shown that this system possesses a high level of extraction ability and capacity. The extraction of lanthanides(III) from chloride-acetate and nitrate-acetate media was investigated on an example of La(III). The composition of the extracted species was confirmed, based on the analysis of lanthanum(III) extraction isotherms. In the case of acetic-acetate aqueous solutions, a decrease in lanthanum(III) extraction efficiency was observed, due to the decreasing equilibrium pH of the aqueous phase in accordance with the cation-exchange mechanism. The composition of the synergistic mixture of Cyanex 272-caprylic acid established demonstrates highly efficient separation of rare-earth metal ions.

Preliminary Characterization of Three Metallurgical Bauxite Residue Samples

Bauxite Metallurgical Residue (BR) is a highly alkaline and very fine-grained by-product of the Bayer process for alumina production. Its huge global annual production has resulted in increasing accumulation of BR, causing deposition problems and serious environmental issues. RM contains oxides and salts of the main elements Fe, Al, Ca, Na, Si, Ti, and rare earths—REEs (Sc, Nd, Y, La, Ce, Ds)—many of which have been categorised by EU as critical metals (CMs). The valorisation of BR as a low-cost secondary raw material and metal resource could be a route for its reduction, introducing the waste into the economic cycle. REEScue constitutes a research project that aims to instigate the efficient exploitation of European bauxite residues, resulting from alumina production from Greece (MYTILINEOS SA), Turkey (ETI Aluminium), and Romania (ALUM SA), containing appreciable concentrations of scandium and REEs, through the development of a number of innovative extraction and separation technologies that can efficiently address the drawbacks of the existing solution. The consortium consists of three alumina producers from Greece (MYTILINEOS SA), Turkey (ETI Aluminium), and Romania (ALUM SA) and two academic partners from Greece (National Technical University of Athens) and Turkey (Necmettin Erbacan University). We present preliminary characterization results of three different BR samples that originate from the three aluminium industries, in respect of bulk chemical analysis (XRF, ICP), mineralogical investigation (XRD), and morphological observation through microscopy.

A Combined Deep Eutectic Solvent–Ionic Liquid Process for the Extraction and Separation of Platinum Group Metals (Pt, Pd, Rh)

Recovery of platinum group metals from spent materials is becoming increasingly relevant due to the high value of these metals and their progressive depletion. In recent years, there is an increased interest in developing alternative and more environmentally benign processes for the recovery of platinum group metals, in line with the increased focus on a sustainable future. To this end, ionic liquids are increasingly investigated as promising candidates that can replace state-of-the-art approaches. Specifically, phosphonium-based ionic liquids have been extensively investigated for the extraction and separation of platinum group metals. In this paper, we present the extraction capacity of several phosphonium-based ionic liquids for platinum group metals from model deep eutectic solvent-based acidic solutions. The most promising candidates, P66614Cl and P66614B2EHP, which exhibited the ability to extract Pt, Pd, and Rh quantitively from a mixed model solution, were additionally evaluated for their capacity to recover these metals from a spent car catalyst previously leached into a choline-based deep eutectic solvent. Specifically, P66614Cl afforded extraction of the three target precious metals from the leachate, while their partial separation from the interfering Al was also achieved since a significant amount (approx. 80%) remained in the leachate.