Removal of metals from aqueous solutions using natural chitinous materials

2003 ◽  
Vol 47 (10) ◽  
pp. 189-196 ◽  
Author(s):  
I.B. Rae ◽  
S.W. Gibb
Keyword(s):  
Heavy Metals ◽  
Alkali Metals ◽  
Alkaline Earth ◽  
Aqueous Media ◽  
Complex Process ◽  
Metal Type ◽  
Flow Through ◽  
Transition And Heavy Metals ◽  
Chitin And Chitosan ◽  
Chitinous Materials

Four naturally derived chitinous materials, commercial cryogenically milled carapace (CCMC), mechanically milled carapace (MMC), chitin and chitosan, were assessed for their ability to remove a range of alkali, alkaline earth, transition and heavy metals from aqueous media in flow-through column trials. The materials showed a poor affinity for the alkali metals and alkaline earth metals but significantly greater affinity for transition and heavy metals. In general, chitin was the least efficient material for removal of transition and heavy metals (≈35%) while chitosan was most effective (>99%). CCMC and MMC both removed >90% of transition and heavy metals tested from solution. Batch studies conducted using copper as a reference metal demonstrated that removal was dependent on a number of variables including pH, contact time, particle size, metal concentration, metal type and the physio-chemical characteristics of the materials. Detailed analysis of the results from these studies indicate that removal is a complex process and that metals can be sequestered from solution by a number of mechanisms including adsorption, absorption and precipitaion.

scholarly journals HYDROCHEMISTRY OF THE PYANJ TRANSBOUNDARY RIVER UPSTREAM, MIDDLE AND DOWNSTREAM AND THE CRITERION ITS USE FOR IRRIGATION

2021 ◽  
Vol 445 (1) ◽  
pp. 114-120
Author(s):  
I. Sh. Normatov ◽  
V.V. Goncharuk ◽  
N.A. Amirgaliev ◽  
A.S. Madibekov ◽  
A.I. Normatov
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Water Samples ◽  
Alkali Metals ◽  
Alkaline Earth ◽  
Maximum Permissible Concentration ◽  
Agricultural Land ◽  
Transboundary River ◽  
Formation Zone

The water quality of the transboundary Pyanj River in the formation zone and along the riverbed before merging with another tributary of the transboundary Amu Darya River-the Vakhsh River was studied. The water quality on the upstream river corresponds to the very soft class (> 1.5 mmol/dm3) and in the middle and the downstream to the soft class (1.5-3.0 mmol/dm3). At the upper, middle and lower reaches of the Pyanj river the concentration of alkaline earth exceeds alkali metals (Ca2+ + Mg2+> Na+ + K+) at HCO3- > SO42- + Cl- and according to the Handa classification they are characterized by temporary rigidity. To assess the criterion of applicability of the Pyanj river water for irrigation the coefficient of sodium adsorption (SAC) was calculated for water samples from the upstream (Khorog), middle (Darvaz) and the downstream (Lower Pyanj) of the Pyanj river that were equal to 0.88; 1.07; 1.71, respectively. The SAC values for all water samples (from the upper, middle and lower reaches) of the Pyanj river indicate their good qualities for irrigation of agricultural land. The concentration of heavy metals in the Pyanj river is significantly lower than the maximum permissible concentration (MPC).

Utilisation of Biomass and Hybrid Biochar from Elephant Grass and Low Density Polyethylene for the Competitive Adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) from Aqueous Media

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Contact Time ◽  
Competitive Adsorption ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Polluted Water ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Elephant Grass

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.

Removal of heavy metals in a flow‐through vertical microbial electrolysis cell

2019 ◽  
Vol 97 (10) ◽  
pp. 2608-2616 ◽  
Author(s):  
Louis‐B. Jugnia ◽  
Dominic Manno ◽  
Meghan Hendry ◽  
Boris Tartakovsky
Keyword(s):  
Heavy Metals ◽  
Electrolysis Cell ◽  
Microbial Electrolysis Cell ◽  
Removal Of Heavy Metals ◽  
Flow Through ◽  
Microbial Electrolysis

scholarly journals Optimization of process parameters for heavy metals biosorption onto mustard waste biomass

2016 ◽  
Vol 14 (1) ◽  
pp. 175-187 ◽  
Author(s):  
Lăcrămioara (Negrilă) Nemeş ◽  
Laura Bulgariu
Keyword(s):  
Heavy Metals ◽  
Aqueous Media ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Solution Ph ◽  
Biosorption Process ◽  
Optimization Of Process Parameters ◽  
Removal Of Heavy Metals ◽  
Equilibrium Data ◽  
Order Kinetic Model

AbstractMustard waste biomass was tested as a biosorbent for the removal of Pb(II), Zn(II) and Cd(II) from aqueous solution. This strategy may be a sustainable option for the utilization of such wastes. The influence of the most important operating parameters of the biosorption process was analyzed in batch experiments, and optimal conditions were found to include initial solution pH 5.5, 5.0 g biosorbent/L, 2 hours of contact time and high temperature. Kinetics analyses show that the maximum of biosorption was quickly reached and could be described by a pseudo-second order kinetic model. The equilibrium data were well fitted by the Langmuir model, and the highest values of maximum biosorption capacity were obtained with Pb(II), followed by Zn(II) and Cd(II). The thermodynamic parameters of the biosorption process (ΔG, ΔH and ΔS) were also evaluated from isotherms. The results of this study suggest that mustard waste biomass can be used for the removal of heavy metals from aqueous media.

scholarly journals Interactions Between Zinc Oxide and Alkali Metals, Alkaline Earth Metals and Halogens: A Theoretical Study

2017 ◽  
Vol 29 (3) ◽  
pp. 585-588
Author(s):  
Aned de Leon ◽  
Grace Jouanne-Jeraissati ◽  
Agustín Martínez-Contreras
Keyword(s):  
Zinc Oxide ◽  
Alkali Metals ◽  
Alkaline Earth ◽  
Theoretical Study ◽  
Alkaline Earth Metals

scholarly journals A systematic study for removal of heavy metals from aqueous media using Sorghum bicolor: an efficient biosorbent

2018 ◽  
Vol 77 (10) ◽  
pp. 2355-2368 ◽  
Author(s):  
Khalida Naseem ◽  
Zahoor H. Farooqi ◽  
Muhammad Z. Ur Rehman ◽  
Muhammad A. Ur Rehman ◽  
Robina Begum ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Aqueous Media ◽  
Review Article ◽  
Isotherm Models ◽  
Adsorption Efficiency ◽  
Adsorption Isotherm Models ◽  
Removal Of Heavy Metals

Abstract This review is based on the adsorption characteristics of sorghum (Sorghum bicolor) for removal of heavy metals from aqueous media. Different parameters like pH, temperature of the medium, sorghum concentration, sorghum particle size, contact time, stirring speed and heavy metal concentration control the adsorption efficiency of sorghum biomass for heavy metal ions. Sorghum biomass showed maximum efficiency for removal of heavy metal ions in the pH range of 5 to 6. It is an agricultural waste and is regarded as the cheapest biosorbent, having high adsorption capacity for heavy metals as compared to other reported adsorbents, for the treatment of heavy metal polluted wastewater. Adsorption of heavy metal ions onto sorghum biomass follows pseudo second order kinetics. Best fitted adsorption isotherm models for removal of heavy metal ions on sorghum biomass are Langmuir and Freundlich adsorption isotherm models. Thermodynamic aspects of heavy metal ions adsorption onto sorghum biomass have also been elaborated in this review article. How adsorption efficiency of sorghum biomass can be improved by different physical and chemical treatments in future has also been elaborated. This review article will be highly useful for researchers working in the field of water treatment via biosorption processing. The quantitative demonstrated efficiency of sorghum biomass for various heavy metal ions has also been highlighted in different sections of this review article.

Sign in / Sign up

Export Citation Format

Share Document