scholarly journals DESIGN AND CALIBRATION OF AN ULTRA-HIGH PRESSURE X-RAY CELL.

1967 ◽  
Author(s):  
G.L. Kulcinski
1991 ◽  
Vol 11 (8) ◽  
pp. 421-424 ◽  
Author(s):  
R.K. Sood ◽  
R.K. Manchanda ◽  
Z. Ye

1998 ◽  
Vol 54 (6) ◽  
pp. 907-911 ◽  
Author(s):  
H. Hosomi ◽  
Y. Ito ◽  
S. Ohba

Dissymmetry of the photoproduct was induced by using a chiral substituent, (S)-methylphenylalanine, in the title compound {N-4-(2,4,6-triisopropylbenzoyl)benzoyl]-(S)-phenylalanine methyl ester (I)}. On irradiation with light from a 250 W ultra-high-pressure Hg lamp for 7 h through a long-pass filter, the photoreaction in a crystal was 100% complete without the loss of crystallinity. The crystal structures (I), before, and (II) {N-[4-(7-hydroxy-3,5-diisopropyl-8,8-dimethylbicyclo[4.2.0]octa-1,3,5-trien-7-yl)benzoyl]-(S)-phenylalanine methyl ester}, after photocyclization, have been determined by X-ray diffraction. For comparison, a crystal structure analysis has also been carried out for the photoproduct (III) of the 3′-COOMe derivative after recrystallization {methyl 3-(7-hydroxy-3,5-diisopropyl-8,8-dimethylbicyclo[4.2.0]octa-1,3,5-trien-7-yl)benzoate}. The dihedral angle between the central carbonyl plane and the triisopropylphenyl ring deviates from 90° by 10 (1)° in (I), which makes an imbalance in the intramolecular O(carbonyl)...H(methine) distances of the isopropyl groups at positions 2 and 6. The crystal structure of (II) indicates that the nearer methine H was predominantly abstracted by the carbonyl O atom in the reaction. The absolute configuration around the asymmetric C atom in the cyclobutenol ring of the product is S.


2008 ◽  
Vol 64 (a1) ◽  
pp. C613-C613
Author(s):  
N.J. Brooks ◽  
B.L.L.E. Gauthe ◽  
S. Rogers ◽  
A. Tyler II ◽  
G.C. Shearman ◽  
...  
Keyword(s):  
X Ray ◽  

1990 ◽  
Vol 34 ◽  
pp. 437-446 ◽  
Author(s):  
Y. Wu ◽  
A. C. Thompson ◽  
J. H. Underwood ◽  
H. K. Mao ◽  
Y. W. Fei ◽  
...  

Recent advances in techniques to generate static ultra-high pressure (>100 GPa) in the diamond anvil cell have significantly enhanced our understanding of the properties of solids under these extreme conditions. In order to characterize the structure of solids at these pressures, X-ray diffraction using synchrotron radiation has become an invaluable tool. Since the highest pressures are attained at the expense of sample volume (~ 100 μm3) , it is best to use the intense radiation available from a synchrotron to study the very small samples used in ultra-high pressure studies. Even with the intense x-ray beams currently available, it is still often desirable to focus the x-ray beam to increase the available flux. We have developed a focusing system which uses multilayer coated spherical mirrors. With this system, intense x-ray beams with sizes smaller than 10 μm by 10 μm can be achieved at a synchrotron radiation beamline. Previously, we used the focusing system for x-ray microprobe experiments.


1996 ◽  
Vol 13 (2) ◽  
pp. 156-161 ◽  
Author(s):  
R. K. Sood ◽  
J. Panettieri ◽  
D. Grey ◽  
G. Woods ◽  
J. Hoffmann ◽  
...  

AbstractFollowing a successful program to investigate the physics of ultra-high-pressure proportional counters, a counter array has been developed for hard X-ray astronomy. A parallel investigation has evaluated the performance of a large-area phoswich scintillator detector for the same purpose. The two detectors have been integrated in a balloon-borne payload, the Astrophysical X-ray Experimental Laboratory (AXEL). This paper describes the instrumentation aboard the payload.


1998 ◽  
Vol 76 (9) ◽  
pp. 1256-1265 ◽  
Author(s):  
Paul Harrington ◽  
Michael A Kerr

The addition of indole and methyl indole at both high and ambient pressures to a series of Michael acceptors under the influence of ytterbium triflate was investigated. Under ambient pressure the more reactive and less sterically hindered electrophiles gave the expected 3-alkylated indoles in good to excellent yields. The more problematic Michael acceptors were subjected to pressures of 13 kbar. In all cases a dramatic reduction in reaction time and a significant improvement in yields was observed. In the cases involving 3-methylcyclohex-2-en-1-one, a by-product was formed and was characterized by single crystal X-ray diffraction. alpha , beta-Unsaturated ketones gave the best yields. Enals tended to polymerize while enoates proved to be much too unreactive. A particularly reactive malonate derived ester and beta-nitrostyrene gave good yields at ambient pressures.Key words: hapalindole, indole, Michael addition, high pressure, ytterbium triflate, Lewis acid.


Sign in / Sign up

Export Citation Format

Share Document