scholarly journals On line chemical composition of analyzer development

1992 ◽  
Author(s):  
Keyword(s):  

2008 ◽  
Vol 80 (8) ◽  
pp. 1747-1762 ◽  
Author(s):  
Harald Pasch ◽  
Lars-Christian Heinz ◽  
Tibor Macko ◽  
Wolf Hiller

The synthesis and characterization of polyolefins continues to be one of the most important areas for academic and industrial polymer research. One consequence of the development of new "tailor-made" polyolefins is the need for new and improved analytical techniques for the analysis of polyolefins with respect to molar mass and chemical composition distribution. The present article briefly reviews different new and relevant techniques for polyolefin analysis. Crystallization analysis fractionation is a powerful new technique for the analysis of short-chain branching in linear low-density polyethylene (LLDPE) and the analysis of polyolefin blends and copolymers regarding chemical composition. For the fast analysis of the chemical composition distribution, a new high-temperature gradient high-performance liquid chromatography (HPLC) system has been developed. The efficiency of this system for the separation of various olefin copolymers is demonstrated. The correlation between molar mass and chemical composition can be accessed by on-line coupling of high-temperature size exclusion chromatography (HT-SEC) and 1H NMR spectroscopy. It is shown that the on-line NMR analysis of chromatographic fractions yields information on microstructure and tacticity in addition to molar mass and copolymer composition.



2016 ◽  
Vol 690 ◽  
pp. 187-193
Author(s):  
Parinya Somrang ◽  
Anucha Wannagon ◽  
Watcharee Sornlar ◽  
Pattarawan Choeycharoen ◽  
Sitthisak Prasanphan ◽  
...  

Lampang, a province in northern Thailand, is the important source of ceramics raw materials, such as kaolin, pottery stone, and ball clay. This study aims to investigate the new ceramics bodies by using these local raw materials. About 50 samples from 15 sources were collected to analyze the chemical composition, mineral composition, and physical properties. Kaolin samples principally consisted of quartz and kaolinite. Its greyish color after firing at 1200 °C made it suitable for stoneware product that does not require white body. The principal ball clay mineral is kaolinite, associated with illite and quartz. All ball clay samples are high strength, which are suitable for tableware production. Pottery stone which can be found at Kaolin deposit, showed a mixed mineralogy of quartz, albite, and muscovite, while some samples showed the presence of kaolinite. It showed significantly low on shrinkage. Pottery stone are widely used as flux in both ceramics body and glaze. These analyzed characteristics were put into the ceramics raw materials database which can be searched on-line. This data is useful for the researching of ceramics body compositions with mainly contained raw materials from Lampang.



2014 ◽  
Vol 17 (10) ◽  
pp. 1263-1269 ◽  
Author(s):  
Raul E. Martinez ◽  
Steven Dhawan ◽  
Walton Sumner ◽  
Brent J. Williams


2019 ◽  
Vol 57 (3) ◽  
pp. 133-138
Author(s):  
Loik G. Mukhtorov ◽  
◽  
Maria B. Nikishina ◽  
Evgenia V. Ivanova ◽  
Yury M. Atroschenko ◽  
...  

The present work is devoted to the study of the biological activity of benzoxazole, 5-nitrobenzoxazole and 5,7-dinitrobenzoxazole in relation to tomato plants. The ability of these substances to stimulate growth processes in tomato seeds, to influence the synthesis of mono- and polysaccharides, to regulate the content of ascorbic acid and the total acidity in the fruits of tomatoes has been studied. The ability of plants to accumulate nitrogen in the nitrate form under the action of benzoxazole and its nitro derivatives has also been analyzed. Thus, the possibility of improving the sowing properties and chemical characteristics of tomato plants by treating them with compounds of the benzoxazole group was studied. In addition, an assessment of the toxicity of the studied drugs was carried out using the computer program GUSAR on-line. Predictions of bioaccumulation factor (BCF) and endotoxicity class for rats were obtained for four forms of drug administration in animals. Earlier, the authors of the article carried out studies of the fungistatism of the considered compounds in vitro on six pathogenic fungi of various taxonomic classes. The germination of tomato seeds treated with the tested drugs was determined in the laboratory on the 12th day of the experiment by counting the germinated seeds. The germination values are expressed as a percentage of the total number of seeds sown. Growing tomato plants and harvesting was carried out in open ground conditions. Plants were treated with benzoxazole and its nitro derivatives by watering with solutions with a concentration of 0.05 mol / l. Control plants were watered. Chemical analysis of tomato fruits was performed under laboratory conditions in accordance with GOST. The analysis of the obtained data showed that the introduction of nitro groups into the basic structure of benzoxazole is accompanied by a significant increase in the biological activity of the synthesized compounds, which has different patterns of manifestation depending on the stage of plant development. Thus, 5,7-dinitrobenzoxazole has the greatest stimulating effect on the growth processes in tomato seeds. While the most pronounced positive effect on the synthesis in the fruits of tomato sugars and ascorbic acid was 5-nitrobenzoxazole. For unsubstituted benzoxazole, no pronounced positive trends in the manifestation of biological activity have been identified. Evaluation forecast using the computer program GUSAR on-line allowed to establish a low level of toxicity of the studied substances. This work is part of the study of the biological activity of various classes of organic compounds. The effect of the test substance on the growth rate and development of agricultural plants, their chemical composition is analyzed. In addition, the fungicidal activity of these compounds is determined. Thus, the purpose of the research is the selection of substances capable of comprehensively solving the problem of obtaining and preserving the yield of crop production.



2011 ◽  
Vol 11 (7) ◽  
pp. 21489-21532 ◽  
Author(s):  
◽  
T. Tritscher ◽  
A. P. Praplan ◽  
P. F. DeCarlo ◽  
B. Temime-Roussel ◽  
...  

Abstract. The aging of secondary organic aerosol (SOA) by photooxidation in the aqueous phase was experimentally investigated. To simulate multiphase processes, the following experiments were sequentially performed in a smog chamber and in an aqueous phase photoreactor: (1) Gas-phase photooxidation of three different volatile organic compounds (VOC): isoprene, α-pinene, and 1,3,5-trimethylbenzene (TMB) in the presence of NOx, leading to the formation of SOA which was subjected to on-line physical and chemical analysis; (2) particle-to-liquid transfer of water soluble species of SOA using filter sampling and aqueous extraction; (3) aqueous-phase photooxidation of the obtained water extracts; and (4) nebulization of the solutions for a repetition of the on-line characterization. SOA concentrations in the chamber measured with a scanning mobility particle sizer (SMPS) were higher than 200 μg m−3, as the experiments were conducted under high initial concentrations of volatile organic compounds (VOC) and NOx. The aging of SOA through aqueous phase processing was investigated by measuring the physical and chemical properties of the particles online before and after processing using a high resolution time-of-flight aerosol mass spectrometer (AMS) and a hygroscopicity tandem differential mobility analyzer (H-TDMA). It was shown that, after aqueous phase processing, the particles were significantly more hygroscopic, and contained more fragmentation ions at m/z = 44 and less ions at m/z = 43, thus showing a significant impact on SOA aging for the three different precursors. Additionally, the particles were analyzed with a thermal desorption atmospheric pressure ionization aerosol mass spectrometer (TD-API-AMS). Comparing the smog chamber SOA composition and non processed nebulized aqueous extracts with this technique revealed that sampling, extraction and/or nebulization did not significantly impact the chemical composition of SOA formed from isoprene and α-pinene, whereas it affected that formed from TMB. For the two first precursors, the aqueous phase chemical composition of SOA was further investigated using offline measurements, i.e. ion chromatography coupled to a mass spectrometer (IC-MS) and an atmospheric pressure chemical ionization mass spectrometer (APCI-MS) equipped with high pressure liquid chromatography (HPLC-MS). These analyses showed that aqueous phase processing enhanced the formation of some compounds already present in the SOA, thus confirming the aging effect of aqueous phase processes. For isoprene experiments, additional new compounds, likely oligomers, were formed through aqueous phase photooxidation, and their possible origins are discussed.



2019 ◽  
Author(s):  
Andrés Esteban Bedoya-Velásquez ◽  
Gloria Titos ◽  
Juan Antonio Bravo-Aranda ◽  
Martial Haeffelin ◽  
Olivier Favez ◽  
...  

Abstract. An experimental setup to study aerosol hygroscopicity is proposed based on the time evolution of attenuated backscatter coefficients from a ceilometer co-located to an instrumented-tower equipped with meteorological sensors at different heights. This setup is used to analyse a 4.5-year database at the ACTRIS SIRTA observatory in Palaiseau (Paris, France, 2.208º E, 48.713º N, 160 m above sea level). A strict criterion has been established to identify hygroscopic growth cases using ancillary information such as on-line chemical composition, resulting in eight hygroscopic growth cases from a total of 120 potential cases. For the eight cases, the hygroscopic growth-related properties such as the attenuated backscatter enhancement factor fβ (RH) and the hygroscopic growth coefficient γ are evaluated. This study evidence that the hygroscopicity parameter γ increases as the contribution of organic aerosols decreases. In this sense, organic mass fraction is anti-correlated with γ while it shows a positive correlation with the inorganic mass fraction. Among inorganic species, the higher correlation was found for NO3−. This is the first time that hygroscopic enhancement factors retrieved directly for ambient aerosols using remote sensing techniques are combined with on-line chemical composition in-situ measurements to evaluate the role of the different aerosol species on aerosol hygroscopicity.



2015 ◽  
pp. 48-53 ◽  
Author(s):  
K. R. Udalaya ◽  
◽  
A. M. Belenkiy ◽  
N. O. Korotkova ◽  
V. B. Deev ◽  
...  


Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Guillaume Hans ◽  
Bruce Allison

Abstract Historically, on-line and real-time measurement of wood chip properties in the pulp and paper industry has been a challenge and has hampered the development of advanced process control strategies. In this study, visible and near-infrared (VIS-NIR) spectroscopy is investigated as a means to characterize wood chip brightness and chemical composition (i.e. extractives, lignin and holocellulose content) on-line. The estimated standard error on the holocellulose reference measurement was significantly reduced using data reconciliation. VIS-NIR calibration models were developed using partial least square regression. Derivative and baseline correction were found to be the most appropriate pre-processing methods. Model desensitization to the influence of moisture content and temperature by means of external parameter orthogonalization resulted in more robust models critical for on-line applications under harsh industrial conditions. Wavelength selection improved model accuracy for all properties. A comparison of two different spectrometer and probe combinations demonstrated that, after wavelengths selection, a non-contact measurement of wood chips performs as well as a contact measurement of wood powder for monitoring chemical composition. On-line prediction of wood chip brightness and chemical composition using the developed VIS-NIR models was demonstrated over 7 months in a kraft pulp mill processing both hardwood and softwood chips.



2014 ◽  
Vol 14 (7) ◽  
pp. 9275-9343 ◽  
Author(s):  
S. Decesari ◽  
J. Allan ◽  
C. Plass-Duelmer ◽  
B. J. Williams ◽  
M. Paglione ◽  
...  

Abstract. The use of co-located multiple spectroscopic techniques can provide detailed information on the atmospheric processes regulating aerosol chemical composition and mixing state. So far, field campaigns heavily equipped with aerosol mass spectrometers have been carried out mainly in large conurbations and in areas directly affected by their outflow, whereas lesser efforts have been dedicated to continental areas characterized by a less dense urbanization. We present here the results obtained in San Pietro Capofiume, which is located in a sparsely inhabited sector of the Po Valley, Italy. The experiment was carried out in summer 2009 in the framework of the EUCAARI project ("European Integrated Project on Aerosol, Cloud Climate Aerosol Interaction"). For the first time in Europe, six state-of-the-art techniques were used in parallel: (1) on-line TSI aerosol time-of-flight mass spectrometer (ATOFMS), (2) on-line Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-TOF-AMS), (3) soot particle aerosol mass spectrometer (SP-AMS), (4) on-line high resolution time-of-flight mass spectrometer-thermal desorption aerosol gas chromatograph (HR-ToFMS-TAG), (5) off-line twelve-hour resolution proton nuclear magnetic resonance (H-NMR) spectroscopy, and (6) chemical ionization mass spectrometry (CIMS) for the analysis of gas-phase precursors of secondary aerosol. Data from each aerosol spectroscopic method were analysed individually following ad-hoc tools (i.e. PMF for AMS, Art-2a for ATOFMS). The results obtained from each techniques are herein presented and compared. This allows us to clearly link the modifications in aerosol chemical composition to transitions in air mass origin and meteorological regimes. Under stagnant conditions, atmospheric stratification at night and early morning hours led to the accumulation of aerosols produced by anthropogenic sources distributed over the Po Valley plain. Such aerosols include primary components such as black carbon (BC), only partly internally mixed with secondary semivolatile compounds such as ammonium nitrate and amines. Other organic components originating from anthropogenic sources at night include monocarboxylic acids which correspond to an AMS factor analogous to the "cooking" organic aerosol (COA) already identified in urban areas. In daytime, enhanced mixing in the planetary boundary layer (PBL) along with increasing temperature determined dramatic changes in aerosol composition caused by the evaporation of semivolatile components and by the entrainment of aged aerosols transported downwards from residual layers. In other words, the entrainment of aged air masses is responsible for the accumulation of low-volatility oxygenated organic aerosol (LV-OOAs) and also for the recycling of primary species such as black carbon. The LV-OOA concentrations were shown to correlate to the simple meteorological tracers of humid PBL air produced by daytime convection over land areas. In particular, both PMF-AMS and PMF-NMR could resolve two components of LV-OOA: one from long-range transport from Central Europe, the second from recirculated PBL air from the Po Valley. According to organic aerosol source apportionment by PMF-AMS, anthropogenic aerosols accumulating in the lower layers overnight accounted for 38% of organic aerosol mass on average, another 21% was accounted for by aerosols recirculated in residual layers but still originating in North Italy, while a substantial fraction (41%) was due to the most aged aerosols imported from transalpine areas. Overall, the deployment of six state-of-the-art spectrometric techniques provided a comprehensive picture of the nature and source contributions of aerosols and aerosol precursors at a European rural site with unprecedented level of details.



Sign in / Sign up

Export Citation Format

Share Document