scholarly journals Analisa Konveksi Paksa (Pemaksaan Udara Masuk) pada Proses Pembakaran Briket Ampas Sagu

2020 ◽  
Vol 11 (3) ◽  
pp. 339-345
Author(s):  
Jusuf Haurissa ◽  
◽  
Helen Riupassa
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Combustion Process ◽  
Burning Process ◽  
Long Time ◽  
Speed Up ◽  
Forced Air ◽  
Temperature Measuring Instrument ◽  
First Time

In previous studies, the initial process of burning briquettes still takes a long time, i.e. app 15-20 minutes. In normal briquette burning, a flame comes out from the briquette hole surface. The purpose of this research is to find a solution to accelerate the burning process and then the solution to use this process easily. The main objective of this research is to examine the amount of heat generated from the briquettes burning process with the number of holes as much as 10, 12, and 14, and to measure the time of initial briquette burning until the first time the flame came out on the briquettes surface. The basic ingredients of briquettes used in this study were sago waste. The tools used are a moisture meter to measure the water content, an infrared thermometer, a temperature measuring instrument, a Stopwatch to measure time, a digital anemometer to measure the airflow speed. From this study, the results obtained indicate that the combustion process in a forced air convection conditions, resulting in the rate of heat transfer as follows: a). For using the 10 holes briquettes, the heat transfer rate is about 8.51 watts, b). In the burning of 12 holes briquettes, the resulting heat transfer rate is about 16.57 watts, c). While on the 14 holes briquettes burning, the rate of heat transfer is about 20.43 watts. When heat energy is applied to boil 5 liters of water, with a 10-hole briquette, the water boils within 23.54 minutes. When using 12 holes briquettes, the water boils in 21.31 minutes, and in the use of 14 holes briquettes, the water boils in 20.21 minutes. It is concluded that the shortest time to boil 5 liters of water is when using briquettes with 14 holes, which boils in 23.34 minutes. These results indicate that forced convection can speed up the briquette burning process and produce a fairly high temperature.

Computations of Boiling

2003 ◽  
Author(s):  
Asghar Esmaeeli ◽  
Gre´tar Tryggvason
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Three Dimensional ◽  
Film Boiling ◽  
Dimensional System ◽  
Long Time ◽  
Short Time ◽  
Three Dimensional System ◽  
Good Agreement

A numerical method for boiling flows, based on a finite volume/front tracking approach, is described. The method is used to examine film boiling and results from two simulations are discussed briefly. In one case the system is assumed to be two-dimensional and the breakup of many bubbles from the film is followed for a sufficiently long time so that it is possible to compute the average heat transfer rate. The other simulation is a fully three-dimensional system, but only one mode is followed for a relatively short time. In both cases the heat transfer rate is in reasonably good agreement with experimental correlations.

Ferro-nanofluid squeeze film lubrication with heat transfer

2021 ◽  
pp. 135065012110276
Author(s):  
Manimegalai Kavarthalai ◽  
Vimala Ponnuswamy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Contact Time ◽  
Transfer Rate ◽  
Fluid Layer ◽  
Darcy Law ◽  
Squeeze Film ◽  
Mean Temperature ◽  
Special Cases ◽  
The Impact

A theoretical study of a squeezing ferro-nanofluid flow including thermal effects is carried out with application to bearings and articular cartilages. A representational geometry of the thin layer of a ferro-nanofluid squeezed between a flat rigid disk and a thin porous bed is considered. The flow behaviours and heat transfer in the fluid and porous regions are investigated. The mathematical problem is formulated based on the Neuringer–Rosensweig model for ferro-nanofluids in the fluid region including an external magnetic field, Darcy law for the porous region and Beavers–Joseph slip condition at the fluid–porous interface. The expressions for velocity, fluid film thickness, contact time, fluid flux, streamlines, pathlines, mean temperature and heat transfer rate in the fluid and porous regions are obtained by using a perturbation method. An asymptotic solution for the fluid layer thickness is also presented. The problem is also solved by a numerical method and the results by asymptotic analysis, perturbation and numerical methods are obtained assuming a constant force squeezing state and are compared. It is shown that the results obtained by all the methods agree well with each other. The effects of various parameters such as Darcy number, Beavers–Joseph constant and magnetization parameter on the flow behaviours, contact time, mean temperature and heat transfer rate are investigated. The novel results showing the impact of using ferro-nanofluids in the two applications under consideration are presented. The results under special cases are further compared with the existing results in the literature and are found to agree well.

scholarly journals Significance of Shape Factor in Heat Transfer Performance of Molybdenum-Disulfide Nanofluid in Multiple Flow Situations; A Comparative Fractional Study

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3711
Author(s):  
Asifa ◽  
Talha Anwar ◽  
Poom Kumam ◽  
Zahir Shah ◽  
Kanokwan Sitthithakerngkiet
Keyword(s):  
Heat Transfer ◽  
Skin Friction ◽  
Molybdenum Disulfide ◽  
Heat Transfer Rate ◽  
Shape Factor ◽  
Transfer Rate ◽  
Maximum Heat ◽  
Left Wall ◽  
Maximum Heat Transfer ◽  
Mos2 Nanoparticles

In this modern era, nanofluids are considered one of the advanced kinds of heat transferring fluids due to their enhanced thermal features. The present study is conducted to investigate that how the suspension of molybdenum-disulfide (MoS2) nanoparticles boosts the thermal performance of a Casson-type fluid. Sodium alginate (NaAlg) based nanofluid is contained inside a vertical channel of width d and it exhibits a flow due to the movement of the left wall. The walls are nested in a permeable medium, and a uniform magnetic field and radiation flux are also involved in determining flow patterns and thermal behavior of the nanofluid. Depending on velocity boundary conditions, the flow phenomenon is examined for three different situations. To evaluate the influence of shape factor, MoS2 nanoparticles of blade, cylinder, platelet, and brick shapes are considered. The mathematical modeling is performed in the form of non-integer order operators, and a double fractional analysis is carried out by separately solving Caputo-Fabrizio and Atangana-Baleanu operators based fractional models. The system of coupled PDEs is converted to ODEs by operating the Laplace transformation, and Zakian’s algorithm is applied to approximate the Laplace inversion numerically. The solutions of flow and energy equations are presented in terms of graphical illustrations and tables to discuss important physical aspects of the observed problem. Moreover, a detailed inspection on shear stress and Nusselt number is carried out to get a deep insight into skin friction and heat transfer mechanisms. It is analyzed that the suspension of MoS2 nanoparticles leads to ameliorating the heat transfer rate up to 9.5%. To serve the purpose of achieving maximum heat transfer rate and reduced skin friction, the Atangana-Baleanu operator based fractional model is more effective. Furthermore, it is perceived that velocity and energy functions of the nanofluid exhibit significant variations because of the different shapes of nanoparticles.

scholarly journals Assessment of TiO2 Nanoconcentration and Twin Impingement Jet of Heat Transfer Enhancement—A Statistical Approach Using Response Surface Methodology

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 595
Author(s):  
Mahir Faris Abdullah ◽  
Rozli Zulkifli ◽  
Hazim Moria ◽  
Asmaa Soheil Najm ◽  
Zambri Harun ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Tio2 Nanoparticle ◽  
Experimental Results ◽  
Improvement Rate ◽  
Design Expert ◽  
Impingement Jet

Impinging jets are considered to be a well-known technique that offers high local heat transfer rates. No correlation could be established in the literature between the significant parameters and the Nusselt number, and investigation of the interactions between the correlated factors has not been conducted before. An experimental analysis based on the twin impingement jet mechanism was achieved to study the heat transfer rate pertaining to the surface plate. In the current paper, four influential parameters were studied: the spacing between nozzles, velocity, concentration of Nano solution coating and nozzle-plate distance, which are considered to be effective parameters for the thermal conductivity and the heat transfer coefficient of TiO2 nanoparticle, an X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) analysis were done, which highlighted the structure and showed that the nanosolution coated the surface homogenously. Moreover, a comparison was done for the experimental results with that of the predicted responses generated by the Design Expert software, Version 7 User’s Guide, USA. A response surface methodology (RSM) was employed to improve a mathematical model by accounting for a D-optimal design. In addition, the analysis of variance (ANOVA) was employed for testing the significance of the models. The maximum Nu of 91.47, where H = S = 1 cm; Reynolds number of 17,000, and TiO2 nanoparticle concentration of 0.5% M. The highest improvement rate in Nusselt was about 26%, achieved with TiO2 Nanoparticle, when S = 3 cm, H = 6 cm and TiO2 nanoparticle = 0.5 M. Furthermore, based on the statistical analysis, the expected values were found to be in satisfactory agreement with that of the empirical data, which was conducted by accounting for the proposed models’ excellent predictability. Multivariate approaches are very useful for researchers, as well as for applications in industrial processes, as they lead to increased efficiency and reduced costs, so the presented results of this work could encourage the overall uses of multivariate methods in these fields. Hypotheses: A comparison was done for the predicted responses generated by the Design Expert software with the experimental results and then studied to verify the following hypotheses: ► Preparation of three concentrations of TiO2 nanosolution was done and studied. ► The heat transfer rate could be increased by surface coating with TiO2 nanoparticle. ► The heat transfer could be improved by the impingement jet technique with suitable adjustments.

scholarly journals Heat Transmission Reinforcers Induced by MHD Hybrid Nanoparticles for Water/Water-EG Flowing over a Cylinder

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 623
Author(s):  
Firas A. Alwawi ◽  
Mohammed Z. Swalmeh ◽  
Amjad S. Qazaq ◽  
Ruwaidiah Idris
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Liquid Velocity ◽  
Flow Characteristics ◽  
Hybrid Nanoparticles ◽  
Critical Parameters ◽  
Heat Transmission ◽  
Constant Wall Temperature

The assumptions that form our focus in this study are water or water-ethylene glycol flowing around a horizontal cylinder, containing hybrid nanoparticles, affected by a magnetic force, and under a constant wall temperature, in addition to considering free convection. The Tiwari–Das model is employed to highlight the influence of the nanoparticles volume fraction on the flow characteristics. A numerical approximate technique called the Keller box method is implemented to obtain a solution to the physical model. The effects of some critical parameters related to heat transmission are also graphically examined and analyzed. The increase in the nanoparticle volume fraction increases the heat transfer rate and liquid velocity; the strength of the magnetic field has an adverse effect on liquid velocity, heat transfer, and skin friction. We find that cobalt nanoparticles provide more efficient support for the heat transfer rate of aluminum oxide than aluminum nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document