Quasistasic modeling of edge fields in planar resonators

2020 ◽  
Vol 49 (5) ◽  
pp. 64-70
Author(s):  
D. V. Denisenko ◽  
V. V. Radchenko
Keyword(s):  
Three Dimensional ◽  
Effective Dielectric Constant ◽  
Method Of Moment ◽  
Effective Parameters ◽  
Lumped Element ◽  
Edge Field ◽  
Dielectric Media ◽  
Proposed Model ◽  
Waveguide Model ◽  
Computational Resources

This paper discusses quasistatic waveguide model for planar resonator placed in multilayer dielectic media, which do not use effective parameters such as effective width of resonator and effective dielectric constant. It allows to use waveguide model in new approach. Edge field is modeled by inclusion of LC-lumped element circuit where values of inductances and capacitances we determined from the solving of electrostatic Laplace equation by the method of moment using the three-dimensional Green function for multilayer dielectric media. A computational experiment showed that the proposed model is effective in modeling planar resonators of complex shape and requires low computational resources.

Practical electron tomography

1995 ◽  
Vol 53 ◽  
pp. 742-743
Author(s):  
C.L. Woodcock
Keyword(s):  
Electron Tomography ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3D Shape ◽  
Computational Resources ◽  
Shape Of Particles

Despite the potential of the technique, electron tomography has yet to be widely used by biologists. This is in part related to the rather daunting list of equipment and expertise that are required. Thanks to continuing advances in theory and instrumentation, tomography is now more feasible for the non-specialist. One barrier that has essentially disappeared is the expense of computational resources. In view of this progress, it is time to give more attention to practical issues that need to be considered when embarking on a tomographic project. The following recommendations and comments are derived from experience gained during two long-term collaborative projects.Tomographic reconstruction results in a three dimensional description of an individual EM specimen, most commonly a section, and is therefore applicable to problems in which ultrastructural details within the thickness of the specimen are obscured in single micrographs. Information that can be recovered using tomography includes the 3D shape of particles, and the arrangement and dispostion of overlapping fibrous and membranous structures.

scholarly journals 3D FEM Model on the Parameters’ Influence of EPB-TBM on Settlements of Single and Twin Metro Tunnels During Construction

2021 ◽  
Author(s):  
Masoud Forsat ◽  
Mohammad Taghipoor ◽  
Masoud Palassi
Keyword(s):  
Three Dimensional ◽  
Injection Pressure ◽  
Effective Parameters ◽  
Grout Injection ◽  
3D Fem ◽  
Supporting Pressure ◽  
Epb Tbm ◽  
The Face ◽  
Clear Distance ◽  
Twin Tunnels

AbstractThe present research exposes the investigation on three-dimensional modeling of the single and twin metro tunnels for the case of the Tehran metro line. At first, simulation implemented on the comparison of the ground movements in the single and twin tunnels. Then the simulation has been performed on the influence of effective parameters of EPB-TBM on the surface settlements throughout excavation. The overcutting, shield conicity, grouting, and the final lining system modeled and the influence of face supporting pressure, grout injection pressure, as well as the clear distance of the tunnels, has been analyzed. The initial results showed a valid ground settlement behavior. The maximum settlements occurred at the end of the shield tail and it was higher in the single tunnel. The face supporting pressure had more effect on the surface settlement in comparison to the grout injection pressure. By increasing the face pressure in the single tunnel, the place of maximum settlement moved back while the grout pressure is insignificant for decreasing the settlements. Furthermore, the influence of the clear distance in the twin tunnels led to zero after the length of 30 m. Accordingly, for more distances, the tunnels must be examined independently and as two different single tunnels.

scholarly journals Nonlinear effects of locally heterogeneous hydraulic conductivity fields on regional stream–aquifer exchanges

2015 ◽  
Vol 19 (11) ◽  
pp. 4531-4545 ◽  
Author(s):  
J. Zhu ◽  
C. L. Winter ◽  
Z. Wang
Keyword(s):  
Groundwater Flow ◽  
Effective Conductivity ◽  
Model Simulation ◽  
Three Dimensional ◽  
Small Scale ◽  
Heihe River ◽  
Effective Parameters ◽  
Aquifer Systems ◽  
Basin Scale ◽  
Local Grid

Abstract. Computational experiments are performed to evaluate the effects of locally heterogeneous conductivity fields on regional exchanges of water between stream and aquifer systems in the Middle Heihe River basin (MHRB) of northwestern China. The effects are found to be nonlinear in the sense that simulated discharges from aquifers to streams are systematically lower than discharges produced by a base model parameterized with relatively coarse effective conductivity. A similar, but weaker, effect is observed for stream leakage. The study is organized around three hypotheses: (H1) small-scale spatial variations of conductivity significantly affect regional exchanges of water between streams and aquifers in river basins, (H2) aggregating small-scale heterogeneities into regional effective parameters systematically biases estimates of stream–aquifer exchanges, and (H3) the biases result from slow paths in groundwater flow that emerge due to small-scale heterogeneities. The hypotheses are evaluated by comparing stream–aquifer fluxes produced by the base model to fluxes simulated using realizations of the MHRB characterized by local (grid-scale) heterogeneity. Levels of local heterogeneity are manipulated as control variables by adjusting coefficients of variation. All models are implemented using the MODFLOW (Modular Three-dimensional Finite-difference Groundwater Flow Model) simulation environment, and the PEST (parameter estimation) tool is used to calibrate effective conductivities defined over 16 zones within the MHRB. The effective parameters are also used as expected values to develop lognormally distributed conductivity (K) fields on local grid scales. Stream–aquifer exchanges are simulated with K fields at both scales and then compared. Results show that the effects of small-scale heterogeneities significantly influence exchanges with simulations based on local-scale heterogeneities always producing discharges that are less than those produced by the base model. Although aquifer heterogeneities are uncorrelated at local scales, they appear to induce coherent slow paths in groundwater fluxes that in turn reduce aquifer–stream exchanges. Since surface water–groundwater exchanges are critical hydrologic processes in basin-scale water budgets, these results also have implications for water resources management.

Study on the generalized k-Hilfer–Prabhakar fractional viscoelastic–plastic model

2021 ◽  
pp. 108128652110258
Author(s):  
Yi-Ying Feng ◽  
Xiao-Jun Yang ◽  
Jian-Gen Liu ◽  
Zhan-Qing Chen
Keyword(s):  
Constitutive Model ◽  
Three Dimensional ◽  
Sensitivity Analyses ◽  
Creep Process ◽  
Fractional Operator ◽  
Modified Model ◽  
Proposed Model ◽  
Accelerated Creep ◽  
The Laplace Transform ◽  
Classical Models

The general fractional operator shows its great predominance in the construction of constitutive model owing to its agility in choosing the embedded parameters. A generalized fractional viscoelastic–plastic constitutive model with the sense of the k-Hilfer–Prabhakar ( k-H-P) fractional operator, which has the character recovering the known classical models from the proposed model, is established in this article. In order to describe the damage in the creep process, a time-varying elastic element [Formula: see text] is used in the proposed model with better representation of accelerated creep stage. According to the theory of the kinematics of deformation and the Laplace transform, the creep constitutive equation and the strain of the modified model are established and obtained. The validity and rationality of the proposed model are identified by fitting with the experimental data. Finally, the influences of the fractional derivative order [Formula: see text] and parameter k on the creep process are investigated through the sensitivity analyses with two- and three-dimensional plots.

Effects of Wheel-Shaft-Fluid Coupling and Local Wheel Deformations on the Global Behavior of Shaft Lines

2002 ◽  
Vol 124 (4) ◽  
pp. 953-957 ◽  
Author(s):  
D. Lornage ◽  
E. Chatelet ◽  
G. Jacquet-Richardet
Keyword(s):  
Three Dimensional ◽  
Fluid Film ◽  
Global Behavior ◽  
Three Dimensional Model ◽  
Fluid Films ◽  
Strongly Coupled ◽  
Proposed Model ◽  
Structural Deformations ◽  
Time Marching ◽  
Fluid Coupling

Rotating parts of turbomachines are generally studied using different uncoupled approaches. For example, the dynamic behavior of shafts and wheels are considered independently and the influence of the surrounding fluid is often taken into account in an approximate way. These approaches, while often sufficiently accurate, are questionable when wheel-shaft coupling is observed or when fluid elements are strongly coupled with local structural deformations (leakage flow between wheel and casing, fluid bearings mounted on a thin-walled shaft, etc.). The approach proposed is a step toward a global model of shaft lines. The whole flexible wheel-shaft assembly and the influence of specific fluid film elements are considered in a fully three-dimensional model. In this paper, the proposed model is first presented and then applied to a simple disk-shaft assembly coupled with a fluid film clustered between the disk and a rigid casing. The finite element method is used together with a modal reduction for the structural analysis. As thin fluid films are considered, the Reynolds equation is solved using finite differences in order to obtain the pressure field. Data are transferred between structural and fluid meshes using a general method based on an interfacing grid concept. The equations governing the whole system are solved within a time-marching procedure. The results obtained show significant influence of specific three-dimensional features such as disk-shaft coupling and local disk deformations on global behavior.

A Greenwood-Williamson Model of Small-Scale Friction

2005 ◽  
Vol 74 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Reese E. Jones
Keyword(s):  
Numerical Method ◽  
Recursion Formula ◽  
Three Dimensional ◽  
Interfacial Friction ◽  
Small Scale ◽  
Analytical Estimate ◽  
Normal Loading ◽  
Proposed Model ◽  
Loading Case ◽  
Transition Length

A Greenwood and Williamson based model for interfacial friction is presented that incorporates the presliding transition phenomenon that can significantly affect small devices. This work builds on previous similar models by developing: an analytical estimate of the transition length in terms of material and surface parameters, a general recursion formula for the case of slip in one direction with multiple reversals and constant normal loading, and a numerical method for the general three-dimensional loading case. In addition, the proposed model is developed within a plasticity-like framework and is shown to have qualitative similarities with published experimental observations. A number of model problems illustrate the response of the proposed model to various loading conditions.

An Equivalent 3-D Method for Analyzing Orthogonally Stiffened Plate Structures

1987 ◽  
Vol 31 (02) ◽  
pp. 101-106
Author(s):  
Kyu Nam Cho ◽  
William S. Vorus
Keyword(s):  
Bridge Decks ◽  
Three Dimensional ◽  
Stiffened Plate ◽  
Plate Structures ◽  
Work Related ◽  
Beam Elements ◽  
Proposed Model ◽  
The Relationship

A new three-dimensional method is proposed for analyzing orthogonally stiffened grillage structures. The method is based on earlier work related to bridge decks. The relationship between system displacement and loads is described mathematically, and matrices are developed to examine the shear compatibility between plate and beam elements. The paper concludes with a comparison between deflections obtained by several different procedures and the proposed model.

scholarly journals Numerical Simulation of Water Absorption and Swelling in Dehulled Barley Grains during Canned Porridge Cooking

Processes ◽  
2018 ◽  
Vol 6 (11) ◽  
pp. 230 ◽  
Author(s):  
Lei Wang ◽  
Mengting Wang ◽  
Mingming Guo ◽  
Xingqian Ye ◽  
Tian Ding ◽  
...  
Keyword(s):  
Moisture Absorption ◽  
Three Dimensional ◽  
Processing Conditions ◽  
Relative Deviation ◽  
Cooking Process ◽  
Proposed Model ◽  
Hygroscopic Swelling ◽  
3D Numerical Model ◽  
Barley Grains ◽  
Experimental Values

Understanding the hydration behavior of cereals during cooking is industrially important in order to optimize processing conditions. In this study, barley porridge was cooked in a sealed tin can at 100, 115, and 121 °C, respectively, and changes in water uptake and hygroscopic swelling in dehulled barley grains were measured during the cooking of canned porridge. In order to describe and better understand the hydration behaviors of barley grains during the cooking process, a three-dimensional (3D) numerical model was developed and validated. The proposed model was found to be adequate for representing the moisture absorption characteristics with a mean relative deviation modulus (P) ranging from 4.325% to 5.058%. The analysis of the 3D simulation of hygroscopic swelling was satisfactory for describing the expansion in the geometry of barley. Given that the model represented the experimental values adequately, it can be applied to the simulation and design of cooking processes of cereals grains, allowing for saving in both time and costs.

Chebyshev multidomain pseudospectral method to solve cardiac wave equations with rotational anisotropy

2018 ◽  
Vol 09 (04) ◽  
pp. 1850025 ◽  
Author(s):  
Jairo Rodríguez-Padilla ◽  
Daniel Olmos-Liceaga
Keyword(s):  
Wave Propagation ◽  
Numerical Methods ◽  
Wave Equations ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Pseudospectral Method ◽  
Finite Difference Schemes ◽  
Cardiac Models ◽  
Computational Resources ◽  
Realistic Geometries

The implementation of numerical methods to solve and study equations for cardiac wave propagation in realistic geometries is very costly, in terms of computational resources. The aim of this work is to show the improvement that can be obtained with Chebyshev polynomials-based methods over the classical finite difference schemes to obtain numerical solutions of cardiac models. To this end, we present a Chebyshev multidomain (CMD) Pseudospectral method to solve a simple two variable cardiac models on three-dimensional anisotropic media and we show the usefulness of the method over the traditional finite differences scheme widely used in the literature.

Three-Dimensional Analysis of Closed-Die Forging Processes: Part 1: Formulation

1989 ◽  
Vol 203 (1) ◽  
pp. 33-37 ◽  
Author(s):  
C F Lugora ◽  
A N Bramley
Keyword(s):  
Theoretical Model ◽  
Energy Dissipation ◽  
Metal Flow ◽  
Three Dimensional ◽  
Total Rate ◽  
Die Forging ◽  
Closed Die Forging ◽  
Proposed Model ◽  
Optimum Velocity ◽  
Forging Load

In this series of papers, a theoretical model based on the upper bound elemental technique is presented for prediction of forging load and metal flow in three-dimensional closed-die forging processes. Three basic elements are introduced in order to partition a forging into simple elementary regions. An optimum velocity distribution within the forging is obtained by minimizing the total rate of energy dissipation using a simplex optimizing procedure. Applications of the proposed model are discussed in Part 2.

Sign in / Sign up

Export Citation Format

Share Document