scholarly journals Selection of Yeast Strains for Ethanol Fermentation of Glucose-FructoseSucrose Mixture

2015 ◽  
Vol 17 (2) ◽  
pp. 114 ◽  
Author(s):  
J. Jasman ◽  
Irfan Dwidya Prijambada ◽  
Chusnul Hidayat ◽  
Donny Widianto
Keyword(s):  
Mixed Culture ◽  
Ethanol Fermentation ◽  
Substrate Consumption ◽  
Mixed Substrate ◽  
Strain Capacity ◽  
Yeast Strains ◽  
The Right ◽  
Selection Of

This study was aimed to compare the ability of some yeast strains to consume sugars (sucrose, glucoseand fructose) and to convert them into ethanol during fermentation. The results of this comparison will be thebasis of considerations in choosing the right strain to be used as a mixed culture to increase the productionof ethanol from substrate containing a mixture of sucrose, glucose and fructose, such as juice of cane andsweet sorghum. The study was conducted using fermentation in substrate consisting of glucose, fructose,and sucrose separately, glucose-fructose mixture, and glucose-fructose-sucrose mixture using some yeaststrains: FNCC3012, OUT7009, OUT7027, OUT7055, OUT7080, OUT7096, OUT7903, OUT7913, and OUT7921.Following the fermentation, analysis of the produced ethanol and the remaining sugar was conducted. Theresults of study indicated that the strains with the highest substrate consumption were OUT7921, OUT7096,OUT7055, OUT7027, and OUT7913 for glucose, fructose, glucose-fructose mixture, sucrose, and glucosefructose-sucrose mixture, respectively. Strains that produced highest concentration ethanol were OUT7096 inglucose and sucrose substrates, OUT7921 in substrate of glucose-fructose mixture and sucrose, OUT7913 insubstrate of glucose-fructose-sucrose mixture. Upon consideration of each strain capacity, both in consumingsugar and producing ethanol, the recommended strains for use in mixed culture in bioethanol fermentationusing mixed substrate of glucose, fructose and sucrose are OUT7096, OUT7913, and OUT7921.

scholarly journals Ethanol Fermentation on Mixed Sugars Using Mixed Culture of Two Yeast Strains

2015 ◽  
Vol 18 (2) ◽  
pp. 116
Author(s):  
J. Jasman ◽  
Irfan Dwidya Prijambada ◽  
Chusnul Hidayat ◽  
Donny Widianto
Keyword(s):  
Mixed Culture ◽  
Ethanol Fermentation ◽  
Ethanol Yield ◽  
Growth Yield ◽  
Fermentation Medium ◽  
Second Stage ◽  
Sweet Sorghum Juice ◽  
Yeast Strains ◽  
Sugar Mixture ◽  
Two Stages

The objective of this study was to evaluate the use of mixed cultures of the recommended yeast strainsfrom a previous study on ethanol fermentation using a substrate mixture consisting of sucrose, glucose, andfructose. There were three mixed (combination) cultures namely OUT7096/OUT7913, OUT7096/OUT7921,and OUT7913/OUT7921. The fermentation medium contained sugar mixture consisting of glucose, fructose,and sucrose with a composition generally close to the composition of sugars in sweet sorghum juice. Overall,fermentation is carried out in two stages. First fermentation was performed using the three mixed culturesto determine the best combination based on the concentration of ethanol produced and the concentration ofresidual sugar. Second fermentation was conducted using the best mixed culture obtained from the fi rst stage.This second stage was intended to describe the pattern of the changes in the concentration of ethanol, sugarsand biomass during the fermentation progresses and to determine some kinetic parameters namely ethanolyield (Yp/s), growth yield (Yx/s) and specifi c growth rate (μ). The results of the fi rst fermentation showed thatthe best mixed culture was OUT7913/OUT7921 and the subsequent fermentation using this culture providethe highest ethanol yield (Yp/s) = 0.47 g.g-1 that was reached at 53rd hour, growth yield (Yx/s) = 0.425 g.g-1, andμ = 0.12 hour-1.Keywords : fermentation, ethanol, mixed culture, mixed sugar

scholarly journals Contribution of Non-Saccharomyces Yeasts to Wine Freshness. A Review

Biomolecules ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 34 ◽  
Author(s):  
Antonio Morata ◽  
Carlos Escott ◽  
María Bañuelos ◽  
Iris Loira ◽  
Juan del Fresno ◽  
...  
Keyword(s):  
Emerging Technologies ◽  
Yeast Strains ◽  
The Right ◽  
Saccharomyces Yeasts ◽  
Selection Of

Freshness, although it is a concept difficult to define in wines, can be understood as a combination of different circumstances. Organolepticwise, bluish red, floral and fruity, more acidic and full-bodied wines, are perceived as younger and fresher by consumers. In traditional winemaking processes, these attributes are hard to boost if no other technology or biotechnology is involved. In this regard, the right selection of yeast strains plays an important role in meeting these parameters and obtaining wines with fresher profiles. Another approach in getting fresh wines is through the use of novel non-thermal technologies during winemaking. Herein, the contributions of non-Saccharomyces yeasts and emerging technologies to these parameters are reviewed and discussed.

PROBLEM ASPECTS OF THE IMPLEMENTATION OF CRIMINAL PROCEDURAL NORMS OF PROTECTION OF THE VICTIMS FROM CRIME

2020 ◽  
pp. 72-76
Author(s):  
Яна Валерьевна Самиулина
Keyword(s):  
Preventive Measure ◽  
Criminal Procedure ◽  
Legal Rights ◽  
Criminal Proceedings ◽  
Effective Mechanism ◽  
The Russian Federation ◽  
The Individual ◽  
The Right ◽  
To Receive ◽  
Selection Of

В настоящей статье предпринята попытка исследовать отдельные проблемные аспекты института потерпевшего в российском уголовном процессе. В этих целях подвергнуты анализу правовые нормы, регламентирующие его процессуальный статус. Раскрываются отдельные пробелы уголовно-процессуального законодательства в сфере защиты законных прав и интересов потерпевшего. Автор акцентирует внимание на том, что совершенствование уголовно-процессуального законодательства в части расширения правомочий потерпевшего по отстаиванию своих нарушенных преступлением прав следует продолжить. На основании проведенного исследования действующего законодательства в части регламентации прав потерпевшего от преступления предлагается расширить перечень получаемых им копий постановлений, указанных в п. 13 ч. 2 ст. 42 УПК РФ. Автор предлагает включить в перечень указанной законодательной нормы право получения потерпевшим копии постановления об избрании конкретного вида меры пресечения, избранного в отношении подозреваемого (обвиняемого). Для создания действенного механизма защиты интересов потерпевших от преступления юридических лиц предлагаем ч. 9 ст. 42 УПК РФ изложить в следующей редакции: «в случае признания потерпевшим юридического лица его процессуальное право в уголовном процессе осуществляет представляющий его профессиональный адвокат». This article attempts to investigate certain problematic aspects of the institution of the victim in the Russian criminal process. For this purpose, analyzed the individual norms governing his procedural status. Separate gaps of the criminal procedure legislation in the sphere of protection of the legal rights and interests of the victim are disclosed. The author emphasizes that the improvement of the criminal procedure legislation in terms of the extension of the victim’s authority to defend his rights violated by the crime should be continued. On the basis of the study of the current legislation regarding the regulation of the rights of the victim of a crime, it is proposed to expand the list of decisions received by him, referred to in paragraph 13, part 2 of article 42 Code of Criminal Procedure. The author proposes to include in the list of the indicated legislative norm the right to receive the victim a copy of the decision on the selection of a specific type of preventive measure, selected in relation to the suspect (accused). To create an effective mechanism for protecting the interests of legal entities victims of a crime, we offer part 9 of art. 42 of the Code of Criminal Procedure of the Russian Federation shall be reworded as follows: «if a legal entity is recognized as a victim, his procedural right in criminal proceedings is exercised by the professional lawyer representing him».

scholarly journals The Impact of Alkaloid-Producing Epichloë Endophyte on Forage Ryegrass Breeding: A New Zealand Perspective

Toxins ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 158
Author(s):  
Colin Eady
Keyword(s):  
Seed Production ◽  
Health Issues ◽  
Abiotic Stressors ◽  
Livestock Health ◽  
The Right ◽  
The Impact ◽  
The Relationship ◽  
And Storage ◽  
Selection Of ◽  
Epichloë Endophyte

For 30 years, forage ryegrass breeding has known that the germplasm may contain a maternally inherited symbiotic Epichloë endophyte. These endophytes produce a suite of secondary alkaloid compounds, dependent upon strain. Many produce ergot and other alkaloids, which are associated with both insect deterrence and livestock health issues. The levels of alkaloids and other endophyte characteristics are influenced by strain, host germplasm, and environmental conditions. Some strains in the right host germplasm can confer an advantage over biotic and abiotic stressors, thus acting as a maternally inherited desirable ‘trait’. Through seed production, these mutualistic endophytes do not transmit into 100% of the crop seed and are less vigorous than the grass seed itself. This causes stability and longevity issues for seed production and storage should the ‘trait’ be desired in the germplasm. This makes understanding the precise nature of the relationship vitally important to the plant breeder. These Epichloë endophytes cannot be ‘bred’ in the conventional sense, as they are asexual. Instead, the breeder may modulate endophyte characteristics through selection of host germplasm, a sort of breeding by proxy. This article explores, from a forage seed company perspective, the issues that endophyte characteristics and breeding them by proxy have on ryegrass breeding, and outlines the methods used to assess the ‘trait’, and the application of these through the breeding, production, and deployment processes. Finally, this article investigates opportunities for enhancing the utilisation of alkaloid-producing endophytes within pastures, with a focus on balancing alkaloid levels to further enhance pest deterrence and improving livestock outcomes.

Compressed acoustic sealing foam optimization investigation using statistical approach

2021 ◽  
Vol 263 (1) ◽  
pp. 4955-4961
Author(s):  
Mathieu Gontier ◽  
Barbara Romeyns
Keyword(s):  
Porous Materials ◽  
Statistical Approach ◽  
Complete System ◽  
Statistical Techniques ◽  
Industrial Equipment ◽  
Acoustic Performance ◽  
Material Characteristics ◽  
Sealing Performance ◽  
The Right ◽  
Selection Of

In industry segments such as automotive and industrial equipment the use of compressed porous materials is well known to improve the global acoustic performance of the complete system. Such porous materials should be designed in a specific way in order to reach a significant acoustic sealing performance at different compression rates. Unfortunately, there are no standard measurement procedures nor predefined material characteristics that allow the selection of the right material with the optimal acoustic performance. The main goal of this research is to link acoustic performance of compressed porous materials with intrinsic material characteristics using statistical techniques.

A Spectral Optimization Algorithm for Multi-Objective Prototype Selection

1995 ◽  
Author(s):  
Andy Dong ◽  
Alice M. Agogino
Keyword(s):  
Optimization Algorithm ◽  
Parametric Design ◽  
Selection Process ◽  
Objective Evaluation ◽  
Design Synthesis ◽  
Multi Objective ◽  
Trade Offs ◽  
Spectral Optimization ◽  
The Right ◽  
Selection Of

Abstract In design synthesis, engineering prototypes make an ideal representation medium for preliminary designs. Unlike parametric design wherein a pre-specified design is parametrically varied, design synthesis demands artistic creativity and engineering experience to transform the previously known components, relationships and designs into a new form. The process compels the designer to ascertain which prototypes will, in some sense, best satisfy the design task. The challenge in this assignment lies in selecting the “right” design prototype. This selection process typically entails an objective evaluation of different designs that perform the same functions or have similar intended behavior and comparing trade-offs between alternate designs. This paper introduces a multi-objective spectral optimization algorithm for the selection of design prototypes based upon their functional representations. The optimization algorithm returns an index of rank, scoring the functional similarity of the proposed design to the goal design. Two illustrative examples apply the algorithm to the selection of a heat fin and beam.

Prophylaxis of obstetric and perinatal pathology at women with pathological increase of body weight during pregnancy

2018 ◽  
pp. 7-79
Author(s):  
S.Yu. Vdovichenko ◽  
◽  
T.D. Fakhrutdinova ◽  
Keyword(s):  
Health Care ◽  
Body Weight ◽  
Pregnant Women ◽  
Key Words ◽  
Perinatal Outcomes ◽  
Perinatal Complications ◽  
Perinatal Pathology ◽  
Fetoplacental Complex ◽  
The Right ◽  
Selection Of

The objective: depression of obstetric and perinatal complications at pregnant women with pathological increase of body weight during pregnancy on the basis of studying of clinical-functional, endocrinologic, metabolic, morphological features of condition of fetoplacental complex and development of advanced algorithm of treatment-and-prophylactic actions. Materials and methods. We conducted examination of 264 patients who consisted on the account concerning pregnancy in female consultations of Kiev. By a method of selection of 178 women were included in retrospective research and 86 – in prospective. The main group was made by 39 pregnant women with whom led individual discussions, control – 142 women, that received traditional references in female consultation. Results. Use of the algorithm improved by us allows to improve obstetric (decrease of frequency of a preeclampsia by 12.3%; anomalies of a patrimonial deyalnost for 8.4%) and perinatal outcomes (depression of level of an asphyxia at a delivery for 9.4% and post-natal adaptation for 7.8%) deliveries of women with an excessive increase of body weight during pregnancy. Conclusion. The received results grant the right to recommend the algorithm improved by us for wide use in practical health care. Key words: obstetric and perinatal pathology, pathological increase of body weight, prophylaxis.

Cancer Curricula for Secondary Schools: Making the Right Choice

1998 ◽  
Vol 28 (3) ◽  
pp. 593-602
Author(s):  
Paul E. Pezza
Keyword(s):  
Secondary Schools ◽  
Marketing Strategy ◽  
Cancer Education ◽  
Theoretical Perspective ◽  
American Cancer Society ◽  
Evaluation Methodology ◽  
The Political ◽  
Cancer Society ◽  
The Right ◽  
Selection Of

The American Cancer Society has produced and distributed for use in secondary schools a curriculum package entitled Right Choices. This article considers the development, testing, and marketing of the new cancer education program. Of particular interest is the selection of the theoretical perspective, evaluation methodology, and marketing strategy employed in its production, given the direction in which the field of health education is moving and the political context in which the curriculum has emerged. The author concludes that in selecting cancer prevention curricula for the schools, making the right choice may not be as simple as adopting what is available from the American Cancer Society. The case of Right Choices also serves to illuminate concerns about the American Cancer Society raised by others and bolsters the call for an examination of the organization's role in an effort to control cancer.

scholarly journals Improvement of the Impact Properties of Composite Laminates by Means of Nano-Modification of the Matrix—A Review

2018 ◽  
Vol 8 (12) ◽  
pp. 2406 ◽  
Author(s):  
Hamed Saghafi ◽  
Mohamad Fotouhi ◽  
Giangiacomo Minak
Keyword(s):  
Composite Laminates ◽  
Cost Effective ◽  
Careful Consideration ◽  
Impact Performance ◽  
Compression After Impact ◽  
The Matrix ◽  
The Right ◽  
2D And 3D ◽  
The Impact ◽  
Selection Of

This paper reviews recent works on the application of nanofibers and nanoparticle reinforcements to enhance the interlaminar fracture toughness, to reduce the impact induced damage and to improve the compression after impact performance of fiber reinforced composites with brittle thermosetting resins. The nanofibers have been mainly used as mats embedded between plies of laminated composites, whereas the nanoparticles have been used in 0D, 1D, 2D, and 3D dimensional patterns to reinforce the matrix and consequently the composite. The reinforcement mechanisms are presented, and a comparison is done between the different papers in the literature. This review shows that in order to have an efficient reinforcement effect, careful consideration is required in the manufacturing, materials selection and reinforcement content and percentage. The selection of the right parameters can provide a tough and impact resistant composite with cost effective reinforcements.

Sign in / Sign up

Export Citation Format

Share Document