scholarly journals The Effects of Manganese Dopant Content and Calcination Temperature on Properties of Titania-Zirconia Composite

2021 ◽  
Vol 21 (4) ◽  
pp. 882
Author(s):  
Muhamad Imam Muslim ◽  
Rian Kurniawan ◽  
Mokhammad Fajar Pradipta ◽  
Wega Trisunaryanti ◽  
Akhmad Syoufian
Keyword(s):  
Calcination Temperature ◽  
Sol Gel ◽  
Diffraction Method ◽  
Dopant Content ◽  
Doped Tio2 ◽  
X Ray ◽  
Specular Reflectance ◽  
Vis Spectroscopy ◽  
Mn Doped ◽  
Mn Dopant

The effects of dopant content and calcination temperature on Mn-doped TiO2-ZrO2 structure and properties were successfully investigated. Composite of Mn-doped titania-zirconia was synthesized by sol-gel method. Titanium(IV) isopropoxide was used as the precursor of TiO2, while zirconiapowder was used as another semiconductor. MnCl2∙4H2O was used as the source of dopant in this study. Various amounts of manganese were incorporated into TiO2-ZrO2 and calcination was performed at temperatures of 500, 700 and 900 °C. Synthesized composites were characterized by Fourier-transform infrared spectroscopy (FTIR), specular reflectance UV-Vis spectroscopy (SR UV-Vis), X-ray diffraction method (XRD) and scanning electron microscopy equipped with X-ray energy dispersive spectroscopy (SEM-EDX). The results showed that Mn-doped TiO2-ZrO2 with the lowest bandgap (2.78 eV) was achieved with 5% of Mn dopant and calcined at 900 °C, while Mn-doped TiO2-ZrO2 with the highest bandgap (3.12 eV) was achieved with 1% of Mn dopant content calcined at 500 °C.

Synthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 Nanoparticles

2012 ◽  
Vol 455-456 ◽  
pp. 110-114 ◽  
Author(s):  
Xuan Dong Li ◽  
Xi Jiang Han ◽  
Wen Ying Wang ◽  
Xiao Hong Liu ◽  
Yan Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Nb-doped TiO2 powders with different concentrations of Nb have been synthesized by a sol-gel method and characterized by a series of technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. The photocatalytic activity of Nb-doped TiO2 is evaluated by degradation efficiency of methyl orange in aqueous solution. The results indicate that the photocatalytic activity of Nb-doped TiO2 synthesized with a Nb/Ti molar ratio of 5% is higher than that of TiO2 under the visible light.

scholarly journals Cobalt Doping on Zirconium Titanate as a Potential Photocatalyst with Visible-Light-Response

2020 ◽  
Vol 20 (4) ◽  
pp. 911
Author(s):  
Emilya Faridatul Sulaikhah ◽  
Rian Kurniawan ◽  
Mokhammad Fajar Pradipta ◽  
Wega Trisunaryanti ◽  
Akhmad Syoufian
Keyword(s):  
Visible Light ◽  
Sol Gel ◽  
Diffraction Method ◽  
Light Response ◽  
Zirconium Titanate ◽  
Titanium Tetraisopropoxide ◽  
X Ray ◽  
Visible Light Response ◽  
Vis Spectroscopy ◽  
Co Doped

Synthesis of cobalt-doped zirconium titanate (Co-doped ZrTiO4) as a potential photocatalyst with visible-light-response had been conducted. Materials used in this research were titanium tetraisopropoxide (TTIP) as a precursor of TiO2, ZrO2 as another semiconductor for coupling, and CoSO4·7H2O as the source of cobalt dopant. The composite was prepared by the sol-gel method with various cobalt contents and calcination temperatures. Composites with various Co dopant contents (0, 1, 3, 5, 7, and 9% (Co wt./Ti wt.)) were calcined at 500 °C for 4 h. In addition, the composite with 5% of dopant content was calcined at 700 and 900 °C to observe the influence of calcination temperature. All samples were characterized by using X-ray powder diffraction method (XRD), Fourier-transform infrared spectroscopy (FTIR), specular reflectance UV-Vis spectroscopy (SRUV), and scanning electron microscopy equipped with X-ray energy dispersive spectroscopy (SEM-EDS). Co-doped ZrTiO4 with the lowest bandgap (2.94 eV) was achieved in a sample containing 3% of cobalt content calcined at 500 °C.

scholarly journals Characterization of Photoactive Fe-TiO2 Lime Coatings for Building Protection: The Role of Iron Content

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1847 ◽  
Author(s):  
Chrysi Kapridaki ◽  
Nikolaos Xynidis ◽  
Eleftheria Vazgiouraki ◽  
Nikolaos Kallithrakas-Kontos ◽  
Pagona Maravelaki-Kalaitzaki
Keyword(s):  
Tio2 Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Nitrogen Adsorption ◽  
Visible Radiation ◽  
Edge Structure ◽  
Doped Tio2 ◽  
X Ray ◽  
Vis Spectroscopy

Iron-doped TiO2 nanoparticles, ranging in Fe concentrations from 0.05 up to 1.00% w/w, were synthesized through a simple sol-gel method. Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), Ultraviolet-Visible (UV-Vis) spectroscopy, nitrogen adsorption−desorption isotherms, X-ray photoelectron spectroscopy (XPS), and X-ray absorption near-edge structure spectroscopy (XANES) were used to characterize the synthesized nanoparticles. The characterization of the Fe-doped TiO2 nanoparticles revealed the predominant presence of anatase crystalline form, as well as the incorporation of the Fe3+ ions into the crystal lattice of TiO2. The photocatalytic assessment of the Fe-doped TiO2 nanoparticles indicated that the low iron doping titania (0.05 and 0.10% w/w) have a positive effect on the photocatalytic degradation of Methyl Orange under visible radiation. Moreover, FTIR monitoring of calcium hydroxide pastes enriched with low Fe-doped TiO2 revealed enhancement of carbonation at both early and later stages. Improved photocatalytic performance and increased lime carbonation, observed in lime coatings with low Fe-doped TiO2 admixtures, established them as invaluable contributors to the protection of the built environment.

scholarly journals The effect of sintering temperature on mesoporous structure of WO3 doped TiO2 powders

2018 ◽  
Vol 50 (1) ◽  
pp. 123-132
Author(s):  
Srdjan Petrovic ◽  
Ljiljana Rozic ◽  
Stevan Stojadinovic ◽  
Bosko Grbic ◽  
Rastko Vasilic ◽  
...  
Keyword(s):  
Calcination Temperature ◽  
Lattice Strain ◽  
Sintering Temperature ◽  
Anatase Phase ◽  
Sol Gel ◽  
Hydrothermal Process ◽  
Mesoporous Structure ◽  
Physical Analysis ◽  
Doped Tio2 ◽  
X Ray

In this study, WO3 doped TiO2 powders were synthesized via sol-gel method combined with a hydrothermal process. The effect of sintering temperature on mesoporous structure and catalytic activities of these powders were investigated. The physical analysis via X-ray diffraction indicates that prepared samples are a mixture of anatase and rutile TiO2 phases. X-ray peak analysis is used to evaluate the crystallite size and lattice strain by the Williamson-Hall analysis. Considering all the reflections of the anatase phase the lattice strain ranging from c = 9.505 to c = 9.548 is calculated, suggesting that microstrain decreases when calcination temperature increases. N2 adsorption-desorption analysis shows that the surface area and pore volume decrease with increasing temperature and that WOx-TiO2 powders primarily consist of mesopores. Sintering temperature induced a change in textural properties causing a systematic shift towards larger mesopores. Simultaneously, photoactivity in decolorization of methyl orange increases with increasing calcination temperature up to 700?C, followed by significant decrease with its further increase.

Structural, Optical and Photocatalytic Photodegradation Properties of Zn1−xMnxO Prepared by the Sol-Gel Process

2011 ◽  
Vol 239-242 ◽  
pp. 2962-2967 ◽  
Author(s):  
Chuan Ling Men ◽  
Hong Qin Li ◽  
Hua Zhang
Keyword(s):  
Single Phase ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Mn Doping ◽  
X Ray ◽  
Decolorization Efficiency ◽  
Vis Spectroscopy ◽  
Sol Gel Process ◽  
Uv Visible ◽  
Mn Doped

Effect of Mn doping on the structural, photoluminescence and photocatalytic photodegradation properties of Zn1−xMnxO have been studied. The Zn1−xMnxO powders and thin films were synthesized by the sol-gel, spin coating and high temperature annealing processes. The samples were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), photoluminescence and UV-visible (UV-Vis) spectroscopy. XRD analysis showed that Zn1−xMnxO can keep a single phase of wurtzite structure at low Mn doping. UV-Vis spectra of Mn-doped samples showed that Mn doping can enhance the decolorization efficiency of methyl orange at optimal Mn doping levels.

Exploring the characteristics of the nickel oxide nanoparticles via Sol - gel method

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
Jothi M ◽  
Sowmiya K
Keyword(s):  
Nickel Oxide ◽  
Ph Value ◽  
Lattice Structure ◽  
Sol Gel ◽  
Systematic Change ◽  
Average Crystalline Size ◽  
Nio Nanoparticles ◽  
Nickel Oxide Nanoparticles ◽  
X Ray ◽  
Vis Spectroscopy

Nickel Oxide (NiO) is an important transition metal oxide with cubic lattice structure. NiO is thermally stable that is suitable for tremendous applications in the field of optic, ceramic,glass, electro-chromic coatings, plastics, textiles, nanowires, nanofibers, electronics,energy technology, bio-medicine, magnetism and so on. In this present study, NiO nanoparticles were successfully synthesized by sol-gel technique. Nano-sols were prepared by dissolving Nickel-Chloride [NiCl2.6H2O] in NaOH solvent and were converted into nano structured gel on precipitation. A systematic change in preparation parameters like calcination temperature, time, pH value has been noticed in order to predict the influence on crystallite size. Then the prepared samples were characterized by the X-ray Diffraction Spectroscopic (XRD), UV-VIS Spectroscopy, Fourier Transform Infra-Red Spectroscopy (FTIR), Energy Dispersive X-ray Spectroscopy (EDX), Scanning Electron Microscopy (SEM) and Particle Size Analyzer (PSA). From XRD, the average crystalline-size has been calculated by Debye-Scherrer Equation and it was found to be 12.17 nm and the band gap energy of Nickel oxide (NiO) from UV studies reveals around 3.85 eV. Further, EDX and FTIR studies, confirm the presences of NiO nanoparticles. The SEM study exhibits the spherical like morphology of Nickel oxide (NiO). Further from PSA, the mean value of NiO nanoparticles has been determined.

scholarly journals Photocatalytic activity of Pr-modified TiO2 for the degradation of bisphenol A

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Denise S. Cordeiro ◽  
Fernando L. Cassio ◽  
Larissa Ciccotti ◽  
Thiago L. R. Hewer ◽  
Paola Corio ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Bisphenol A ◽  
Pore Diameter ◽  
Sol Gel ◽  
Bandgap Energy ◽  
Photocatalytic Efficiency ◽  
Average Pore ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Adsorption Desorption

AbstractPraseodymium doped TiO2 nanoparticles were successfully prepared by the sol–gel method and characterized by X-ray powder diffraction, N2 adsorption–desorption isotherm, and UV–vis spectroscopy. The effects of the dopant on the crystallite size, specific surface area, average pore diameter, pore volume, and bandgap energy were investigated. The photocatalytic activity of the catalysts was evaluated by bisphenol A degradation and mineralization, which is a representative endocrine disruptor. Furthermore, under visible light irradiation the Pr-modified TiO2 photocatalysts exhibited higher photocatalytic efficiency than unmodified TiO2. When praseodymium was loaded (1.0–5.0%) onto the surface of TiO2, the rates of degradation and mineralization were increased 3–5 times.

The Structural, Magnetic and Optical Properties of Ni-Mg-Zn Ferrite Prepared With Different Complexing Agents via Sol-Gel Method

2021 ◽  
Author(s):  
Yanchun Zhang ◽  
Aimin Sun ◽  
Zhaxi Suonan
Keyword(s):  
Optical Properties ◽  
Electron Microscope ◽  
Sol Gel ◽  
Complexing Agents ◽  
Complexing Agent ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Zn Ferrite ◽  
Vis Spectroscopy

Abstract Different complexing agents were used to prepare Ni-Mg-Zn ferrite with the composition formula Ni0.2Mg0.2Zn0.6Fe2O4 via sol-gel method, which included citric acid, oxalic acid, egg white and EDTA. The Ni0.2Mg0.2Zn0.6Fe2O4 ferrite with no complexing agent was also prepared as a comparison. The chemical phases of samples were analyzed by the X-ray diffraction (XRD), which indicated that samples had spinel phase structure. The lattice constants of samples are in the range of 8.3980 ~ 8.4089 Å. The composition and structure were further studied by fourier transform infrared spectroscopy (FTIR). There were two typical characteristic bands related to the stretching vibrations of spinel ferrite in FTIR spectra. Scanning electron microscope (SEM) micrographs and transmission electron microscope (TEM) images showed that the particles have the shape of spherical cube. Energy dispersive spectrometer (EDS) analyzed the elements and ingredients of samples, which included Ni, Mg, Zn, Fe and O. X-ray photoelectron spectroscopy (XPS) is used to examine further the elemental composition and chemical state of sample prepared with EDTA as complexing agent. The optical properties of samples were investigated by photoluminescence spectra and UV-Vis spectroscopy. Vibrating sample magnetometer (VSM) was used to characterize magnetic properties, hysteresis loops revealed the ferrimagnetism behavior of prepared samples.

scholarly journals Synthesis and Characterization of Boron, Copper, and Zinc-Doped Hydroxyapatite by Sol-Gel Method: Research of Absorption and Thermal Behavior

2021 ◽  
Author(s):  
Dilek Çanakçı
Keyword(s):  
Thermal Behavior ◽  
Sol Gel ◽  
Absorption Bands ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Copper And Zinc ◽  
Vis Spectroscopy ◽  
Metal Doped

Abstract In this study, hydroxyapatites reinforced with Boron, Copper and Zinc at different rates were produced using the sol-gel method. Different amounts of metal during the production of hydroxyapatite were used to observe the amount of crystallization and morphological differences in their structures. The characterization of the metal-doped HAp was carried out by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and Energy-dispersive X-ray spectroscopy (EDX). The data indicated that the Ca/P stoichiometric ratios of the samples varied between 1.71 and 2, so their morphologies were different from each other. The absorption behavior of novel metal-doped HAp samples was evaluated at room temperature by UV-vis spectroscopy. In the absorption spectra of the samples, absorption bands formed in similar regions. In addition, the thermal behavior of HAp samples was investigated using TG/DTA techniques. The results of the analysis showed that heat resistance of the new synthesized samples was quite high.

Antibacterial Activity of Nickel -Doped ZnO\MWCNTs hybrid Prepared by Sol-Gel technique

2021 ◽  
Author(s):  
Selma M.H. AL-Jawad ◽  
Zahraa S. Shakir ◽  
Duha S. Ahmed
Keyword(s):  
Antibacterial Activity ◽  
Sol Gel ◽  
Inhibition Zone ◽  
Sem Analysis ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Zno Nps ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno

ZnO/MWCNTs hybrid and doped with different concentration of Nickel element prepared by using Sol-gel been technique reported. All samples were prepared and characterized by X-Ray Diffraction Analysis (XRD), Energy Dispersive X-ray Spectroscopy (EDS), Fourier-Transform Infrared Spectroscopy (FTIR), Field-Emission Scanning Electron Microscopy (FE-SEM), and UV-Vis spectroscopy have been identified the structural, optical and morphological properties. X-ray diffraction showed the polycrystalline nature with hexagonal wutzite structure of hybrid and doped with Nickel. The crystalline size of the hybrid nanostructure was increasing from 23.73 nm to 34.59 nm. Besides, the UV-Vis spectroscopy showed a significant decrease in the band gap values from 2.97 eV to 2.01 eV. Whereas the FE-SEM analysis confirm the formation spherical shapes of ZnO NPs deposited on cylindrical tubes representing the MWCNTs. The antibacterial activity reveals that the inhibition zone of Ni doped-ZnO/MWCNTs hybrid was 28.5 mm, 26.5 mm toward E. coli and S. aureus bacteria, respectively.

Sign in / Sign up

Export Citation Format

Share Document