scholarly journals FRACTIONAL TECHNOLOGY AND TOOLS FOR POST-HARVEST GRAIN TREATMENT AND PROCESSING WITH CRUSHING

2018 ◽  
Vol 12 (4) ◽  
pp. 16-21 ◽  
Author(s):  
P A Savinykh ◽  
Yu. V. Sychugov ◽  
V. A. Kazakov
Keyword(s):  
Production Efficiency ◽  
Economic Effect ◽  
Technological Parameters ◽  
Two Stage ◽  
Hermetic Storage ◽  
Post Harvest ◽  
Technological Line ◽  
Cleaning Machine ◽  
Combine Harvesters ◽  
Two Stages

The use of fractional technologies for post-harvest treatment and processing of grain heap delivered from field with further special purpose use of grain fractions leads to a significant increase in grain production efficiency. (Research purpose) Developing a fractional technology for post-harvest treatment and processing of grain with crushing and preservation of feed grain fraction and designing a technological line and machines for it. (Materials and methods) The authors have analyzed the technological level and developed a fractional technology for grain post-harvest treatment and processing by crushing with subsequent preservation of the feed grain fraction. They have offered a technological line and presented the design and technological parameters of the corresponding technical means (МЗУ-20Д - grain cleaning universal machine, МПО-30ДФ - preliminary grain cleaning machine with fractionation, ПЗД-3,1, ПЗД-10 – two-stage grain crusher). (Results and discussion) The authors have designed, manufactured and tested a universal grain-cleaning machine МЗУ-20Д. It efficiently cleans grain material coming from the field after its threshing by combine harvesters, and divides it into fractions: seed and feed grain – 60-70 percent, waste material - up to 10 percent, grain fodder - up to 40 percent. Further on, the grain is sent for crushing (for wet grain), followed by preservation and hermetic storage of the products obtained before their feeding to animals. Tests have shown that the developed feed preparation machine efficiently performs the technological process. The authors have developed a two-stage grain crusher (ПЗД-3,1), performing the crushing of grain material in two stages by three rollers, followed by preservation (for wet grain) of the feed grain fraction. (Conclusions) It has been established that the use of the new fractional technology and equipment contributes to an increase in grain cleaning productivity – by 30-40 percent, and the estimated annual economic effect of the renovation  is 400,000 rubles. The estimated annual economic effect of the use of the two-stage grain crusher (ПЗД-3,1) has proved to be more than 60 thousand rubles, and the level of production intensification has increased by 26 percent as compared to the MURSKA crusher produced in Finland.

scholarly journals Results of Laboratory Studies of the Automated Sorting System for Root and Onion Crops

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1257
Author(s):  
Alexey Dorokhov ◽  
Alexander Aksenov ◽  
Alexey Sibirev ◽  
Nikolay Sazonov ◽  
Maxim Mosyakov ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Technological Parameters ◽  
Post Harvest ◽  
Manual Sorting ◽  
Sorting System ◽  
Working Bodies ◽  
Automatic Removal

The roller and sieve machines most commonly used in Russia for the post-harvest processing of root and tuber crops and onions have a number of disadvantages, the main one being a decrease in the quality of sorting due to the contamination of working bodies, which increases the quantity of losses during sorting and storage. To obtain high-quality competitive production, it is necessary to combine a number of technological operations during the sorting process, such as dividing the material into classes and fractions by quality and size, as well as identifying and removing damaged products. In order to improve the quality of sorting of root tubers and onions by size, it is necessary to ensure the development of an automatic control system for operating and technological parameters, the use of which will eliminate manual sorting on bulkhead tables in post-harvest processing. To fulfill these conditions, the developed automatic control system must have the ability to identify the material on the sorting surface, taking into account external damage and ensuring the automatic removal of impurities. In this study, the highest sorting accuracy of tubers (of more than 91%) was achieved with a forward speed of 1.2 m/s for the conveyor of the sorting table, with damage to 2.2% of the tubers, which meets the agrotechnical requirements for post-harvest processing. This feature distinguishes the developed device from similar ones.

A novel two-stage method of plant seedlings classification based on deep learning

2021 ◽  
pp. 1-11
Author(s):  
Tianhong Dai ◽  
Shijie Cong ◽  
Jianping Huang ◽  
Yanwen Zhang ◽  
Xinwang Huang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Learning Technology ◽  
Two Stage ◽  
Second Stage ◽  
Stage Classification ◽  
Different Types ◽  
Two Stages ◽  
Plant Seedlings

In agricultural production, weed removal is an important part of crop cultivation, but inevitably, other plants compete with crops for nutrients. Only by identifying and removing weeds can the quality of the harvest be guaranteed. Therefore, the distinction between weeds and crops is particularly important. Recently, deep learning technology has also been applied to the field of botany, and achieved good results. Convolutional neural networks are widely used in deep learning because of their excellent classification effects. The purpose of this article is to find a new method of plant seedling classification. This method includes two stages: image segmentation and image classification. The first stage is to use the improved U-Net to segment the dataset, and the second stage is to use six classification networks to classify the seedlings of the segmented dataset. The dataset used for the experiment contained 12 different types of plants, namely, 3 crops and 9 weeds. The model was evaluated by the multi-class statistical analysis of accuracy, recall, precision, and F1-score. The results show that the two-stage classification method combining the improved U-Net segmentation network and the classification network was more conducive to the classification of plant seedlings, and the classification accuracy reaches 97.7%.

The Chemical Technology for Producing Precious Metals from Enrichment Rejects of Copper-Pyrite Ores

2021 ◽  
Vol 316 ◽  
pp. 625-630
Author(s):  
Nadezhda L. Medyanik ◽  
Anton P. Ponomarev ◽  
Olga V. Yershova
Keyword(s):  
Economic Effect ◽  
Precious Metals ◽  
Payback Period ◽  
Chemical Technology ◽  
Chemical Extraction ◽  
Two Stage ◽  
Flotation Tailings ◽  
Metallurgical Combine ◽  
Copper Pyrite ◽  
Pyrite Ores

The chemical technology for recovery precious metals Au and Ag from mature flotation tailings of copper-pyrite ores by two-stage sintering with chlorine-ammonium reagents and leaching of bakes with water is developed. The chemical extraction of gold and silver is carried out, using NH4Cl and NH4NO3 reagents in the ratios of 1:1 at a temperature of 250 °C, and 2:1 at 200 °C. In accordance with the obtained results, a chemical technology of enrichment rejects of copper-pyrite ores processing and a scheme of primary apparatus chain for implementing this technology are proposed. The economic effect of the technology realization is calculated. This effect is 96.3 million rubles with a payback period of 8 years when processing enrichment rejects of copper-pyrite ores in amount of 109.5 thousand tons per year under the conditions of JSC “Uchaly Mining and Metallurgical Combine”.

scholarly journals Simple Method of Approximate Calculation of Statically Indeterminate Trusses

2019 ◽  
Vol 16 (06) ◽  
pp. 1840026 ◽  
Author(s):  
Janusz Rębielak
Keyword(s):  
Approximate Calculation ◽  
Computer Software ◽  
Two Stage ◽  
Simple Method ◽  
Two Stages

The paper presents principles of the simple method which makes possible approximate calculations of statically indeterminate truss systems in two stages. The two-stage method applies rules of other methods used for calculations of statically determinate trusses. In each of the two stages, there are considered statically determinate trusses, patterns of which are obtained as results of suitable withdrawing of appropriate members from the pattern of the basic statically indeterminate truss. There are presented results of calculations carried out for two cases of load for selected type of plane truss together with comparison of outcomes obtained by means of using appropriate computer software.

scholarly journals SENSITIVITY TO ENVIRONMENTAL STRESS OF PRATA,JAPIRA AND VITÓRIA BANANA CULTIVARS PROVEN BY CHLOROPHYLL a FLUORESCENCE

2017 ◽  
Vol 39 (2) ◽  
Author(s):  
PRISCILA NOBRES DOS SANTOS ◽  
DIOLINA MOURA SILVA ◽  
CAMILLA ZANOTTI GALLON ◽  
JOSÉ AIRES VENTURA
Keyword(s):  
Environmental Stress ◽  
Chlorophyll A ◽  
Chlorophyll A Fluorescence ◽  
Physiological Responses ◽  
Fluorescence Emission ◽  
Conservation Of Energy ◽  
Post Harvest ◽  
Mda Content ◽  
Two Stages

ABSTRACT This study aimed to evaluate the physiological responses to environmental stress during pre- and post-harvest of the following banana cultivars: Prata (AAB), Japira (AAAB) and Vitoria (AAAB). Analyses were carried out on young plants at vegetative stage (daughter-plant) and adult plants at reproductive stage (motherplant). The experimental design was completely randomized. In the in vivo pre-harvest analysis were used seven replications, in a factorial scheme (3x2x2), three cultivars and two stages (vegetative and reproductive) and two collection periods (March and June). For the analysis of post-harvest quality were used five replications in a factorial design (3x2x5), corresponding to three cultivars, two development stages and five periods of post-harvest analysis, carried out every two days from stage 4 of fruit ripening. The chlorophyll a fluorescence emission kinetics showed low photochemical performance of the three cultivars in June, a period characterized by lower temperatures and water deficit. Prata was the cultivar with the lowest tolerance to abiotic physiological behavior changes, which also reflected in fruit quality, because there was a change in physical and physicochemical parameters. Japira and Vitoria cultivars showed similar physiological responses in the pre- and post-harvest periods, according to their phylogenetic proximity. The total performance index, i.e., the conservation of energy absorbed by PSII up to the reduction of the final PSI acceptors (PItotal) and the di-malonic aldehyde (MDA) content were significantly higher in Japira and Vitoria cultivars compared to Prata cultivar in the reproductive phase. There was no significant change in the potential quantum efficiency of PSII (FV / FM = jP0) among the three cultivars. It was concluded that Japira and Vitoria cultivars showed greater plasticity to tolerate or even adapt to abiotic variations keeping higher fruit yield. PItotal is the most sensitive parameter during the banana life cycle and important tool for distinguishing different cultivars yields.

scholarly journals CONSTRUCTION OF AN EFFECTIVE WAREHOUSE SYSTEM OF THE ENTERPRISE IN THE PROCESSING OF AGRICULTURAL CARGO

2021 ◽  
Vol 6 (166) ◽  
pp. 217-226
Author(s):  
O. Pavlenko ◽  
D. Velykodnyi
Keyword(s):  
Performance Indicator ◽  
Optimization Problems ◽  
Economic Effect ◽  
Unit Cost ◽  
Maximum Level ◽  
Technological Parameters ◽  
Goods And Services ◽  
The Third ◽  
Use Of Resources ◽  
The Moment

The article investigates the existing trends and prospects for the development of warehousing services in the system of production and processing of products, which allowed us to form the purpose of the research in this development. The chosen theme is quite topical, because warehousing processes are an integral part of the formation of supply logistics in modern production processes. One of the ways to reduce the cost of goods and services is the efficient use of resources. Ukrainian and foreign scientists have touched many questions concerning the development of the infrastructure component, solutions of optimization problems regarding the process of import-export of goods to the warehouse, but without determining the optimal values ​​of technological parameters of warehousing systems. The technological scheme of operation of the warehouse system of the enterprise LLC "MEGA CRISP» allows to see the whole chain of operations from the moment of arrival of the vehicle with cargo (containers and packaging) to the moment of sending the cargo (finished product) to the recipient; the necessary types of resources involved in these processes are also taken into account. Total costs were chosen as an evaluation indicator of the choice of an efficient supply channel. Relevant parameters of influence are taken into account: intensities of corresponding cargo flows, unit cost of the appropriate work and one hour of work of one worker, time of performance of an appropriate operation, quantity of the involved resources for performance of the appropriate operation and working time of the warehouse during the day. An imitation full-factor experiment was performed, based on the results of which a regression model in linear form with a non-zero coefficient was determined, in which each coefficient indicates the degree of influence of the relevant factor on the performance indicator. The results of determining the economic effect showed that "Variant 2" (increasing the number of workers) is the least expensive, and the level of costs is lower for all series of experiments compared to the basic variant - "Variant 1". The maximum difference is reached in 12217.8 hryvnias at the maximum loading of a warehouse. And when comparing the third and first variants: only at the maximum level of output flow (170 t / h), the third variant will be cheaper by 852.6 hryvnias. The highest level of positive value of the effect among the variants offered is "Variant 2", the level of savings will be 12,217.8 hryvnias per shift.

scholarly journals Evaluating the parameters of a mobile maize dryer in practice

2013 ◽  
Vol 61 (6) ◽  
pp. 1779-1784
Author(s):  
Josef Los ◽  
Jiří Fryč ◽  
Zdeněk Konrád
Keyword(s):  
Large Scale ◽  
Electric Energy ◽  
Operating Parameters ◽  
The Czech Republic ◽  
Maize Hybrids ◽  
Post Harvest ◽  
Second Stage ◽  
Energy Intensiveness ◽  
Two Stages ◽  
The Given

The method of drying maize for grain has been recently employed on a large scale in the Czech Republic not only thanks to new maize hybrids but also thanks to the existence of new models of drying plants. One of the new post-harvest lines is a plant in Lipoltice (mobile dryer installed in 2010, storage base in 2012) where basic operational measurements were made of the energy intensiveness of drying and operating parameters of the maize dryer were evaluated. The process of maize drying had two stages, i.e. pre-drying from the initial average grain humidity of 28.55% to 19.6% in the first stage, and the additional drying from 16.7% to a final storage grain humidity of 13.7%. Mean volumes of natural gas consumed per 1 t% for drying in the first and second stage amounted to 1.275 m3 and 1.56 m3, respectively. The total mean consumption of electric energy per 1 t% was calculated to be 1.372 kWh for the given configuration of the post-harvest line.

scholarly journals IMPROVING THE EFFICIENCY OF FIBRE CONCRETE PRODUCTION

2020 ◽  
pp. 4-9
Author(s):  
V. Nelyubova ◽  
V. Babaev ◽  
Nataliya Alfimova ◽  
S. Usikov ◽  
O. Masanin
Keyword(s):  
Building Materials ◽  
Production Efficiency ◽  
Raw Materials ◽  
Basalt Fiber ◽  
Operational Reliability ◽  
Fiber Reinforced Concrete ◽  
Technological Parameters ◽  
Optimal Method ◽  
Physicomechanical Characteristics ◽  
Concrete Production

fiber concrete is one of the types of effective building materials that ensure the operational reliability of structures due to a set of unique properties. However, the maximum physicomechanical characteristics of this type of products are achieved only if the fiber is evenly distributed in the concrete matrix and the optimum ratio of raw materials is reached. In this connection, the aim of the work was to increase the production efficiency of fiber-reinforced concrete by optimizing the formulation and technological parameters of its manufacture. The optimal method of introducing the fiber into the concrete mix and the type of superplasticizer were previously determined, which allowed ensuring the maximum physicomechanical characteristics of the products. Optimization of prescription parameters was carried out using the method of mathematical planning of the experiment, where the amount of cement, superplasticizer and basalt fiber were varied. After processing the results, the dependences of the compressive strength on variable factors were obtained, which would allow to select the optimal dosages of raw materials for given mechanical characteristics of the products.

scholarly journals Construction of isotherms in solvent extraction of copper

2009 ◽  
Vol 63 (4) ◽  
pp. 309-312 ◽  
Author(s):  
Vladimir Cvetkovski ◽  
Vesna Conic ◽  
Milovan Vukovic ◽  
Goran Stojanovski ◽  
Milena Cvetkovska
Keyword(s):  
Solvent Extraction ◽  
Organic Solvent ◽  
Electrolyte Solution ◽  
Mine Water ◽  
Copper Recovery ◽  
Equilibrium Isotherms ◽  
Technological Parameters ◽  
One Stage ◽  
Two Stages

The aim of this work is construction of equilibrium isotherms in solvent extraction. Technological parameters have been predicted for treatment of mine water by solvent extraction and electrowining. Two stages of extractions and one stage of stripping have been predicted for copper recovery by analyzing the equilibrium isotherms. The process was performed on mine water with 2,5 g/dm3 Cu2+, 3 g/dm Fe2+, pH 1,8, using 9 vol% LIX 984N in kerosene (organic solvent), with 95 and 98% stages efficiencies, respectively. This course produced an advanced electrolyte solution, suitable for electrowining and cathodic copper recovery, containing 51 g/dm3 Cu2+ and 160g/dm3 H2SO4 from a 30 g/dm3 Cu and 190 g/dm3 H2SO4.

scholarly journals Analysis and suggestions of greenhouse cleaning machine in China and abroad

2019 ◽  
Vol 272 ◽  
pp. 01051
Author(s):  
Tianhua Li ◽  
Dajun Chen ◽  
Guoying Shi ◽  
Min Wei ◽  
Yueshun Zhang ◽  
...  
Keyword(s):  
Production Efficiency ◽  
Active Role ◽  
Ground Temperature ◽  
Light Transmittance ◽  
Current Development ◽  
Cleaning Equipment ◽  
Cleaning Machine

The light transmittance of greenhouse surface directly affects the illumination of greenhouse, and will eventually affect the indoor ground temperature, temperature, humidity and Photosynthesis of crops, thus affecting the growth of crops. As a modern greenhouse maintenance and cleaning equipment, greenhouse cleaning machine plays an active role in improving the light transmittance of greenhouse and improving the production efficiency of farmers. This paper mainly expounds the structure, principle and method of different kinds of greenhouse cleaning machines in China and abroad, analyzes the current development situation and prospects of greenhouse cleaning equipment, and puts forward some suggestions.

Sign in / Sign up

Export Citation Format

Share Document