Microcontroller Device for Conductor Identification Using Acoustic Signal

2020 ◽  
Vol 67 (1) ◽  
pp. 28-34
Author(s):  
Aleksandr V. Vinogradov ◽  
Aleksey V. Bukreev
Keyword(s):  
Acoustic Signal ◽  
Acoustic Waves ◽  
Theoretical Calculations ◽  
Poor Quality ◽  
Electrical Circuit ◽  
Research Purpose ◽  
Electrical Wiring ◽  
The Right ◽  
The Cost ◽  
Technical Solutions

When repairing and replacing electrical wiring in enterprises, the main difficulty is the lack or poor quality of documentation, plans for conductors laying. Distinguishing wires (cables) and their cores by the color of the shells or using tags attached to the ends is difficult if the shells have the same color and there are no tags. Devices and technical solutions used to identify wires and cables do not allow recognizing conductors without breaking the electrical circuit, removing insulation, and de-energizing the network. Searching for the right conductor is a time-consuming operation. (Research purpose) The research purpose is developing a new microcontroller device for identifying wires using an acoustic signal. (Materials and methods) Literature sources has been searched for devices for conductors identifying. (Results and discussion) The article proposes a method that involves feeding an acoustic signal to a wire at one point and capturing it at another, in order to recognize the desired wire. The article presents results of comparison of the developed microcontroller device for identifying conductors using an acoustic signal with known devices and methods for conductors recognizing. (Conclusions) The article reveals the shortcomings of existing methods and means of identifying wires and cables. Authors performed a theoretical calculation of the sound pressure in the conductor at a given distance. The article presents the calculation of speed of acoustic waves in conductors with different types of insulation. Authors designed a microcontroller device for identifying conductors using an acoustic signal and tested it. It was determined that the device increases the safety of work, reduces the cost of operating internal wiring and identification time; eliminates the violation of wire insulation, the need to disable electrical receivers. The convergence of theoretical calculations and experimental data was shown.

scholarly journals MODERN PROBLEMS OF THE USE OF TRUCKS IN AGRICULTURE

2020 ◽  
Vol 14 (4) ◽  
pp. 44-48
Author(s):  
Nail Asadullin
Keyword(s):  
Agricultural Production ◽  
Complex Structure ◽  
Poor Quality ◽  
Spare Parts ◽  
The Sustainable Development ◽  
Agricultural Enterprises ◽  
Stage Of Development ◽  
Effective Development ◽  
The Right ◽  
The Cost

At the present stage of development of agricultural production much attention is paid to its mechanization and automation. Progressive and perspective direction of production development is the use of trucks. Features of transport support of agricultural enterprises determine the important role of trucks in the sustainable development of all agricultural production. A wide variety of types and types of products determines the complex structure of agricultural fleets. To date, there are numerous shortcomings and problems in the use of trucks in agricultural enterprises, for example: poor quality of roads, high prices for spare parts, which lead to loss of material resources and increase the cost of transportation and reduce the efficiency of all agricultural production. For further effective development of trucks in agricultural production and to make the right organizational and economic decisions in this article have been discussed in detail and analyzed all the numerous shortcomings of the use of trucks in agriculture.

IMPLEMENTASI JOB ORDER COSTING METHOD DALAM PERHITUNGAN HARGA POKOK PRODUKSI MAP

2018 ◽  
Vol 4 (2) ◽  
pp. 43-55
Author(s):  
Ika Yulianti ◽  
Endah Masrunik ◽  
Anam Miftakhul Huda ◽  
Diana Elvianita
Keyword(s):  
Production Process ◽  
Quantitative Data ◽  
Production Cost ◽  
Qualitative Data ◽  
Cost Data ◽  
Method Calculation ◽  
Cost Of Production ◽  
The Right ◽  
The Cost

This study aims to find a comparison of the calculation of the cost of goods manufactured in the CV. Mitra Setia Blitar uses the company's method and uses the Job Order Costing (JOC) method. The method used in this study is quantitative. The types of data used are quantitative and qualitative. Quantitative data is in the form of map production cost data while qualitative data is in the form of information about map production process. The result of calculating the cost of production of the map between the two methods results in a difference of Rp. 306. Calculation using the company method is more expensive than using the Job Order Costing method. Calculation of cost of goods manufactured using the company method is Rp. 2,205,000, - or Rp. 2,205, - each unit. While using the Job Order Costing (JOC) method is Rp. 1,899,000, - or Rp 1,899, - each unit. So that the right method used in calculating the cost of production is the Job Order Costing (JOC) method

TECHNICAL AND ECONOMIC EVALUATION OF THE DEVELOPMENT OF A DEVICE FOR THE PREVENTION OF APNEA DURING PHYSIOLOGICAL SLEEP IN HUMANS

2020 ◽  
pp. 198-210
Author(s):  
Сергей Борисович Казаков ◽  
Дмитрий Михайлович Шишов ◽  
Антон Игоревич Ларин ◽  
Александр Петрович Николаев ◽  
Аза Валерьевна Писарева
Keyword(s):  
Sleep Apnea ◽  
Humidity Sensor ◽  
Lung Ventilation ◽  
High Price ◽  
Device Structure ◽  
Artificial Lung Ventilation ◽  
Exact Moment ◽  
The Cost ◽  
Technical Solutions ◽  
Physiological Sleep

В статье представлен обзор существующих технических решений в сфере мониторинга и предотвращения апноэ во сне. Произведён анализ существующих аппаратов для предотвращения апноэ, который показал, что на рынке присутствует большое количество импортных моделей, однако они имеют довольно высокую цену. Разработанный нами Российский аналог проектируемого аппарата, при схожих характеристиках, будет иметь более привлекательную цену, чем у импортных приборов. Интегрирование датчика влажности в персональную маску пациента даёт возможность отслеживать остановки дыхания пациента во время сна, и тем самым включать процесс принудительной подачи дыхательной смеси именно в тот момент, когда она необходима для устранения патологии. Целью научной работы является разработка конструкции прибора и создание алгоритма программы для управления аппарата искусственной вентиляции лёгких для предотвращения апноэ во сне. Показана разработка структуры устройства аппарата. Подобран компрессор и датчик влажности с обоснованными характеристиками для создания аппарата, а также основные элементы. Разработана конструкция корпуса аппарата и разработана компоновка. Выполнено технико-экономическое обоснование разработки аппаратно-программного комплекса для предотвращения апноэ во сне. Показано, что себестоимость готового изделия достаточно конкурентна The article presents an overview of existing technical solutions in the field of monitoring and prevention of sleep apnea. An analysis of existing devices for preventing apnea was made, which showed that there are a large number of imported models on the market, but they have a fairly high price. The Russian analog of the designed device developed by us, with similar characteristics, will have a more attractive price than that of imported devices. The integration of the humidity sensor into the patient's personal mask makes it possible to monitor the patient's breathing stops during sleep, and thus enable the process of forced delivery of the respiratory mixture at the exact moment when it is necessary to eliminate the pathology. The purpose of the research is to develop the device design and create a program algorithm for controlling the artificial lung ventilation device to prevent sleep apnea. The development of the device structure is shown. The compressor and humidity sensor with reasonable characteristics for creating the device, as well as the main elements are selected. The design of the device body and its layout were developed. A feasibility study for the development of a hardware and software system for preventing sleep apnea has been completed. It is shown that the cost of the finished product is quite competitive

Protecting the Desperate: The Regulation of Payday Lending

2015 ◽  
Vol 43 (1) ◽  
pp. 147-176
Author(s):  
Andrew J Serpell
Keyword(s):  
Consumer Credit ◽  
Law Reform ◽  
Payday Lending ◽  
Short Term ◽  
Payday Loans ◽  
The Law ◽  
The Right ◽  
Credit Contracts ◽  
The Cost

Payday loans are small-amount, short-term, unsecured, high-cost credit contracts provided by non-mainstream credit providers. Payday loans are usually taken out to help the consumer pay for essential items, such as food, rent, electricity, petrol, broken-down appliances or car registration or repairs. These consumers take out payday loans because they cannot — or believe that they cannot — obtain a loan from a mainstream credit provider such as a bank. In recent years there has been a protracted debate in Australia — and in several overseas jurisdictions — about how to regulate the industry. Recent amendments to the National Consumer Credit Protection Act 2009 (Cth) — referred to in this article as the 2013 reforms — are designed to better protect payday loan consumers. While the 2013 reforms provide substantially improved protection for payday loan consumers, further changes to the law may be warranted. This article raises several law reform issues which should be considered as part of the 2015 review into small amount credit contracts, including whether the caps on the cost of credit are set at the right level, whether the required content and presentation of the consumer warnings needs to be altered, whether more needs to be done to protect consumers who are particularly disadvantaged or vulnerable and whether a general anti-avoidance provision should be included in the credit legislation.

Mathematical Description of the Influence of the Bunker Outlet on the Grain Motion in the Microwave Convective Area

2020 ◽  
pp. 73-80
Author(s):  
Aleksey N. Vasil’yev ◽  
Andrey A. Tsymbal ◽  
Aleksey A. Vasil’yev
Keyword(s):  
Mathematical Description ◽  
Microwave Field ◽  
Convective Zone ◽  
Research Purpose ◽  
Field Zone ◽  
Flow Process ◽  
Grain Processing ◽  
Grain Flow ◽  
The Right ◽  
Processing Zone

One of the environmentaly friendly methods of drying and decontamination of grain is its processing in microwave-convective installations. The efficiency of using the microwave field depends on the uniformity of its distribution in the grain processing zone. This is provided by the design features of the microwave core and waveguides. The uniformity of grain movement in the microwave field zone is important. It is important that the grain is moved in the microwave convective zone by hydraulic movement. In this case, the grain passes through zones with different intensity of the microwave field sequentially and the grain processing is uniform. (Research purpose) The research purpose is in making a mathematical dependence of parameters of the hopper outlet on the movement of grain in the microwave convective zone. (Materials and methods) The article presents the parameters of the outlet that ensure the grain flow without forming static arches in accordance with the method of calculating outlet bins. Fluctuations in humidity for different crops of processed grain will not lead to a violation of the grain flow process. The resulting equation for changing the height of the dynamic arch, depending on its location in the height of the hopper, allows to determine the uneven flow of grain from the hopper outlet. (Results and discussion) When unloading grain, there is an uneven flow in the right and left halves of the hopper, relative to the central axis. When only one hopper is unloaded, 0.84 kilograms more wheat is unloaded from its left half than from the right. This difference leads to uneven and reduced efficiency of grain processing in the microwave-convective zone. (Conclusions) To ensure the uniformity of grain processing in the microwave convective zone, it is necessary to improve the mechanism of grain flow from the outlet of the hopper.

Automated Control of the Microclimate in the Premises of Pig-Breeding Complexes

2020 ◽  
pp. 103-108
Author(s):  
Viktoriya Yu. Ukhanova
Keyword(s):  
Agricultural Production ◽  
Individual Characteristics ◽  
Feed Consumption ◽  
Management Systems ◽  
Research Purpose ◽  
Energy Costs ◽  
Technical Equipment ◽  
Pig Farming ◽  
The Individual ◽  
The Cost

In the pig breeding, a large share of the production cost is accounted for by the cost of electricity and heat. Reducing energy costs is one of the important tasks of the industry. It is important to identify and study modern technologies and equipment for pig farming due to the constant increase in electricity tariffs, significant energy costs for creating and maintaining a microclimate. (Research purpose) The research purpose is in an analysis of modern available technologies and equipment for agricultural production, including pig farming, allowing to reduce the cost of production. (Materials and methods) Authors used a method for determining the standard indicators of energy consumption of energy resources in the pig industry, based on the calculation and analytical method. The article presents an analyze of automated microclimate management systems in pig breeding complexes, taking into account the individual characteristics of farms produced by OWEN. (Results and discussion) Automated microclimate management systems can improve the productivity of pig farms; reduce the cost of electrical and thermal energy, reduce the number of diseases of animal from hypothermia, high humidity or temperature in the room, feed consumption; monitor the chemical composition of the air. The article considers three options for creating a microclimate in rooms with animals, taking into account the individual characteristics of enterprises. (Conclusions) The profitability of pig production depend on the level of technical equipment of farms, automation, and the use of energy-saving technologies and equipment. The use of innovations in agricultural production makes it possible to increase labor productivity up to three times, and savings due to reduced feed costs can reach several million rubles a year.

Economic feasibility of restoration of degraded and neglected lands

2020 ◽  
pp. 79-90
Author(s):  
Anastasiya V. Mironova ◽  
Igor’ V. Liskin ◽  
Irina I. Afonina
Keyword(s):  
Soil Layer ◽  
Black Soil ◽  
Economic Feasibility ◽  
Research Purpose ◽  
Necessary Condition ◽  
Labor Costs ◽  
Human Needs ◽  
Fallow Lands ◽  
The Cost ◽  
Regions Of Russia

Neglect of soils leads to their degradation, worsens useful properties, and reduces fertility and productivity. (Research purpose) The research purpose is in conducting a comparative analysis of technologies for treating degraded soils, taking into account the economic feasibility of their restoration in non-black-soil regions of Russia. (Materials and methods) The article shows the main technological scheme of restoration of degraded soils. Authors have identified the main groups of land that are located in non-black-soil regions of Russia. (Results and discussion) The article presents the need for equipment, economic and labor costs for the restoration of each type of land in the non-black-soil regions of Russia. Authors took into account that the salary of machine operators depends on the time of direct execution of the task. It was found that the restoration of virgin and fallow lands was the most preferable from the economic, energy-saving and environmental points of view. The article shows that the restoration of pasture areas exceeds the cost of processing virgin lands, but the number of necessary machine and tractor units is comparable to work on virgin lands. Authors recommend to develop the soils with woody and shrubby vegetation in the first place, starting with land occupied by young plants. It is necessary to take into account the criteria for the fertility of the soil layer. It was found that soils with a small excess of moisture have small cost of its development, while on heavily swampy soils the cost of work on their development is many times higher than the cost of restoring other types of land. (Conclusion) The article shows that the restoration of neglected land is a necessary condition for improving the provision of human needs for food and a number of industrial goods. First of all, it is necessary to develop land that requires minimal investment of economic and labor costs.

Universal Health Coverage

2017 ◽  
Author(s):  
Joia S. Mukherjee
Keyword(s):  
Health Care ◽  
Universal Health Coverage ◽  
Poor Quality ◽  
Theory And Practice ◽  
Health Coverage ◽  
Quality Health Care ◽  
The Sustainable Development ◽  
Quality Health ◽  
The Right ◽  
Universal Health

This chapter explores the seminal topic of Universal Health Coverage (UHC), an objective within the Sustainable Development goals. It reviews the theory and definitions that shape the current conversation on UHC. The movement from selective primary health care to UHC demonstrates a global commitment to the progressive realization of the right to health. However, access to UHC is limited by barriers to care, inadequate provision of care, and poor-quality services. To deliver UHC, it is critical to align inputs in the health system with the burden of disease. Quality of care must also be improved. Steady, sufficient financing is needed to achieve the laudable goal of UHC.This chapter highlights some important steps taken by countries to expand access to quality health care. Finally, the chapter investigates the theory and practice behind a morbidity-based approach to strengthening health systems and achieving UHC.

scholarly journals An Optimal Control Problem by a Hybrid System of Hyperbolic and Ordinary Differential Equations

Games ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 23
Author(s):  
Alexander Arguchintsev ◽  
Vasilisa Poplevko
Keyword(s):  
Optimal Control ◽  
Differential Equations ◽  
Optimal Control Problem ◽  
Control Problem ◽  
Ordinary Differential Equations ◽  
Hyperbolic Equations ◽  
Control Methods ◽  
The Right ◽  
The Cost ◽  
Optimal Control Methods

This paper deals with an optimal control problem for a linear system of first-order hyperbolic equations with a function on the right-hand side determined from controlled bilinear ordinary differential equations. These ordinary differential equations are linear with respect to state functions with controlled coefficients. Such problems arise in the simulation of some processes of chemical technology and population dynamics. Normally, general optimal control methods are used for these problems because of bilinear ordinary differential equations. In this paper, the problem is reduced to an optimal control problem for a system of ordinary differential equations. The reduction is based on non-classic exact increment formulas for the cost-functional. This treatment allows to use a number of efficient optimal control methods for the problem. An example illustrates the approach.

Sign in / Sign up

Export Citation Format

Share Document