scholarly journals Analisis Kelayakan Air Berbasis Android

2021 ◽  
Vol 5 (2) ◽  
pp. 211
Author(s):  
Alia Sutarwiah ◽  
Alfit Fajri B ◽  
Faisal Abda’oe ◽  
Fredly Deviano B ◽  
M. Ali Dermawan ◽  
...  
Keyword(s):  
Water Quality ◽  
Temperature Sensor ◽  
Water Clarity ◽  
Total Dissolved Solids ◽  
Dissolved Solids ◽  
Water Condition ◽  
Android System ◽  
Water Conditions ◽  
Turbidity Level ◽  
Sensor Temperature

This research was conducted to identify the test of the water quality which good for consumption. It can be proved from temperature, turbidity level, and TDS (Total Dissolved Solids). By tempting the sensor, the turbidity and TDS meter controlled with the Arduino uno and the MCU node is forwarded to send data to the bylink application. The bylink application will help in monitoring water conditions by displaying the water condition which fit for consuming. The method used in this research was started with making a prototype then producing data to determine the feasibility of water through the TDS sensor, temperature sensor, and NTU (water clarity). This indicators were developed on an Android system whom the user could determine feasibility water easier.

scholarly journals Effect of red algal bloom on growth and production of carps

Our Nature ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 48-54
Author(s):  
Ram Bhajan Mandal ◽  
Sunila Rai ◽  
Madhav Kumar Shrestha ◽  
Dilip Kumar Jha ◽  
Narayan Prasad Pandit
Keyword(s):  
Water Quality ◽  
Body Weight ◽  
Chlorophyll A ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Algal Bloom ◽  
Total Dissolved Solids ◽  
Dissolved Solids ◽  
Aquaculture Farm ◽  
Red Algal

An experiment was carried to assess the effect of red algal bloom on growth and production of carp, water quality and profit from carp for 120 days at Aquaculture Farm of Agriculture and Forestry University, Chitwan. The experiment included two treatments: carp polyculture in non-red pond and carp polyculture in red pond with algal bloom each with three replicates. Carp fingerlings were stocked at 1 fish/m2 and fed with pellet containing 24% CP at 3% body weight. Net yield of rohu was found significantly higher (p<0.05) in non-red ponds (0.38±0.01 t ha-1) than red ponds (0.24±0.05 t ha-1). Survival of rohu (84.9±1.4%), bighead (95.2±2.0%) and mrigal (88.1±14.4%) were also significantly higher (p<0.05) in non-red ponds than red ponds. Red algal bloom affected DO, nitrate and chlorophyll-a, nitrite, total nitrogen, total phosphorus, total dissolved solids and conductivity. However, overall carp production and profit from carp remained unaffected.

scholarly journals RESPONSE SURFACE METHODOLOGY VIA DESIRABILITY FUNCTION TECHNIQUES FOR OPTIMIZING CORRELATED RESPONSES OF ELECTRICAL CONDUCTIVITY AND TOTAL DISSOLVED SOLIDS OF SELECTED BOREHOLE WATER

2020 ◽  
Vol 4 (3) ◽  
pp. 333-342
Author(s):  
KEHINDE MONSURU YUSUFF ◽  
M. Lawal ◽  
A. T. Audu ◽  
O. A. Wale-Orojo
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Water Source ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Physical Parameters ◽  
Dissolved Solids

The health benefits in the description and observation of quantitative contents of quality parameters present or contained in any water source cannot be underestimated as they determine selection of best choice from available water sources for different intended uses as well as resource consumption. It also helps to compare the observed quantity of the quality with the acceptable standards or limits to get desired results. Physical parameters like pH, temperature, electrical conductivity (EC) and total dissolved solids (TDS) among others are determined by present of other chemical properties like Cations (Mg2+, Ca2+, Na+, etc), Anions (Cl-, NO3-, SO42+, etc), heavy metals and other dissolved materials during the course of its formation in different proportions and amounts. This study observed EC and TDS of 20 selected boreholes as two close and correlated water quality parameters as well as two of the major water quality parameters that account for overall quality of any water source, despite their different quantitative contents and physical features, they are likely determined by the same set of cations and anions with similar constraint equations. In contrast to linear programming, multiple criteria optimization models were fitted for EC and TDS using Response Surface Methodology via desirability techniques, optimal values obtained in this case measured against several criteria are found to lie between acceptable standards limits for drinking water, other numerical values and descriptive features in the final results reflect that the response equations obtained were well fitted.

scholarly journals Researchof Water Quality and its Chemical Parameters by Titration Method and Instrumenal Method

2019 ◽  
Vol 8 (6S4) ◽  
pp. 871-874
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Water Samples ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Analysis ◽  
Instrumental Method ◽  
Titration Method ◽  
Dissolved Solids

he water quality analysis is an important aspect in understanding the behavior of water and what can they be used for. This study gives us a valuable information on the general properties of water quality parameters like pH, electrical conductivity, TDS, Bicarbonate, Sulfate, Nitrate, chloride etc. of the study area . Water samples were analyzed at the water quality lab. NIH, Roorkee for pH, electrical conductivity and total dissolved solids. The pH of water varied from 7.14 to 7.75. The electrical conductivity (EC) of sample falls from 620µS/cm to 2000µS/cm. The overall total dissolved solids in water of study area varied from 120mg/l to 900mg/l. Overall the range of the Chloride in water of the study area tend to falls between 13mg/l to 375mg/l. Sulfate of all the water samples that were collected from the study area have ranged from 28mg/l to 250mg .The range of the Bicarbonate of all the water samples varied from 320mg/l to 1051mg/l. The study area helps to know about water quality parameters and how to find their values by usingtwo methods : 1) titration method 2) instrumental method .It also helps us to apply these water quality parameters in ArcGis. It helps us to show the values of different parameters in different blocks ofambala for different years In this we have studied different blocks of ambala district Haryana .We have taken the samples from different places from the blocks and also samples are from wells, canal , rivers, ponds.

scholarly journals Assessment of Water Quality Index for the Groundwater in Tumkur Taluk, Karnataka State, India

2009 ◽  
Vol 6 (2) ◽  
pp. 523-530 ◽  
Author(s):  
C. R. Ramakrishnaiah ◽  
C. Sadashivaiah ◽  
G. Ranganna
Keyword(s):  
Water Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Total Dissolved Solids ◽  
Physicochemical Analysis ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Groundwater Samples ◽  
Calcium Magnesium ◽  
Iron Manganese

The present work is aimed at assessing the water quality index (WQI) for the groundwater of Tumkur taluk. This has been determined by collecting groundwater samples and subjecting the samples to a comprehensive physicochemical analysis. For calculating the WQI, the following 12 parameters have been considered: pH, total hardness, calcium, magnesium, bicarbonate, chloride, nitrate, sulphate, total dissolved solids, iron, manganese and fluorides. The WQI for these samples ranges from 89.21 to 660.56. The high value of WQI has been found to be mainly from the higher values of iron, nitrate, total dissolved solids, hardness, fluorides, bicarbonate and manganese in the groundwater. The results of analyses have been used to suggest models for predicting water quality. The analysis reveals that the groundwater of the area needs some degree of treatment before consumption, and it also needs to be protected from the perils of contamination

Survey of the Water Quality of the Bahar County Streams (Iran) by NSFWQI

2015 ◽  
Vol 16 (SE) ◽  
pp. 395-403
Author(s):  
Abbas Ghaffari Habib ◽  
Seyed Hadi Khatami
Keyword(s):  
Water Quality ◽  
Dissolved Oxygen ◽  
Fecal Coliform ◽  
Agricultural Sector ◽  
Oxygen Demand ◽  
Total Dissolved Solids ◽  
Biological Oxygen Demand ◽  
Dissolved Solids ◽  
The Mean

In Bahar County (Iran), rivers are among the important sources of water for the agricultural sector. Therefore, this research evaluated the parameters of temperature, pH, Total Dissolved Solids (TDS), turbidity, nitrate, total phosphate, dissolved oxygen (DO), Biological Oxygen Demand (BOD5), and fecal coliform at five stations for five months (from February 2015 to June 2015) to determine water quality in the rivers. Based on this evaluation, the NSFWQI index was calculated and, finally, the routes of the rivers were zoned. The best water quality was recorded at Station Number 3 with the NSFWQI Value of 80 in January, and the worst at Station Number 5 (latgah) with the NSFWQI Value of 37 in June. Based on the mean NSFWQI indices, water quality was Medium at Stations Number 1, 2, and 4, good at Station Number 3, and bad at Station number 5.

Chlorinous flavor perception in drinking water

2004 ◽  
Vol 49 (9) ◽  
pp. 321-328 ◽  
Author(s):  
P. Piriou ◽  
E.D. Mackey ◽  
I.H. Suffet ◽  
A. Bruchet
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Total Dissolved Solids ◽  
Quality Characteristics ◽  
Consumer Perception ◽  
Dissolved Solids ◽  
Flavor Perception ◽  
Taste Testing ◽  
Significant Change

Chlorinous flavors at the tap are the leading cause of customers' complaints and dissatisfaction with drinking water. To characterize consumer perception and acceptance to chlorinous tastes, extensive taste testing was performed with both trained panelists and average consumers. Taste testing with trained panelists showed that chlorine perception is underestimated by disinfectant flavor thresholds reported in the literature. However, trained panelists significantly overestimate the average consumer's ability to perceive chlorine. In addition, consumer perception seems to be influenced by the chlorination practices of the country they live in. Among water quality characteristics that may influence chlorine perception, temperature was not found to induce any significant change. The influence of total dissolved solids (TDS) on chlorine perception remains unclear and, as reported elsewhere, background tastes such as musty, may significantly impact chlorine threshold.

scholarly journals Hydrochemical Characteristics and Temporal Variations of Geothermal Water Quality in Tangtou, Shandong, China

Water ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 1643 ◽  
Author(s):  
Zongjun Gao ◽  
Jiutan Liu ◽  
Fuquan Li ◽  
Min Wang ◽  
Jianguo Feng ◽  
...  
Keyword(s):  
Water Quality ◽  
Clean Energy ◽  
Temporal Variations ◽  
Total Dissolved Solids ◽  
Geothermal Water ◽  
Total Hardness ◽  
Hydrochemical Characteristics ◽  
Dissolved Solids ◽  
Rock Interaction ◽  
Geological Conditions

Geothermal water resources are a kind of clean energy, which is a renewable resource to a certain extent and has a high value of development and utilization. To understand the hydrochemical characteristics, origins, and temporal variations of geothermal water quality in Tangtou, 13 geothermal water samples from 2007 to 2019 and geothermal geological conditions were collected. Cl− and Na+ are the major ions, which make the geothermal water belong Cl-Na type. The total dissolved solids values of geothermal waters were 1560–2512 mg/L and pH were in the range of 6.7–8.8. The development of faulted structures provides conditions for the formation of geothermal water. In addition, geothermal water is recharged by shallow underground cold water. Water-rock interaction, as well as mixing processes, in the process of long runoff path and the slower deep-water cycle is the main factor controlling the chemical composition of geothermal water. Calculated saturation index values indicated that the geothermal water was saturated with respect to silicate and carbonate minerals. Cation and silica chemical geothermometers indicated that reservoir temperatures ranged from 94.63 to 196.10 °C and from 69.13 to 123.75 °C, respectively. Based on the grey relational analysis, the main physicochemical components of geothermal water are obviously correlated with the geothermal water exploitation and precipitation. Overall, affected by exploitation and precipitation, main physicochemical components (such as the total dissolved solids, total hardness, temperature, Na+, Ca2+, Cl−, K+, and Mg2+) showed a certain stage.

scholarly journals ALAT UKUR TDS (TOTAL DISSOLVED SOLID) AIR GARAM DENGAN RESISTIF SEBAGAI INDIKATOR

2016 ◽  
Vol 19 (1) ◽  
pp. 9
Author(s):  
Aloisius Wisnu Lalita Dewa ◽  
Priyo Sasmoko
Keyword(s):  
Water Quality ◽  
Salt Water ◽  
Digital Signal ◽  
Alternating Current ◽  
Total Dissolved Solids ◽  
Analog Signal ◽  
Dissolved Solids ◽  
Factory Production ◽  
Total Dissolved Solid ◽  
Reading Distance

Aloisius Wisnu Lalita Dewa, Priyo Sasmoko  in this paper explain that, physical water quality can be identified in various ways, one of which is measuring the amount of solute called Total Dissolved Solid (TDS). This study aims to design and make a TDS solution by using two electrodes as sensors. These two electrodes flow alternating current and negative values alternately into water. Analog signal in the form of voltage is read by the microcontroller by converting it into a digital signal, then the microcontroller processes the data and displays the TDS value. Tests are carried out by measuring the same solution using TDS meters and salt water TDS. Testing starts from a solution of 175 ppm to 8500 ppm. Making solutions based on TDS meter factory production. The results of salt water TDS measurements showed that the measured tds values increased from 173 ppm to 8007 ppm. Error reading at 8500 ppm, this is because the reading distance of salt water TDS is only up to 8260 ppm. Keywords : TDS, conductivity, electroda, measurement device.ReferencesMalvino. 1995. Prinsip-prinsip Elektronkai. Jakarta : Erlangga.Rusmadi, Dedy. 2001. Mengenal Komponen Elektronika. Bandung : Pionir JayaSumariyah, Yulianto. T, Priyono J, 2006. Rancang Bangun Sistem Pengukur Konduktivitas Larutan Elektrolit Menggunakan Mikrokontoler AT89C51. Program Studi Fisika Fakultas MIPA Universitas Diponegoro. Semarang.Utomo, D. 2012. Alat pengukur resistansi konduktivitas. dan Total dissolved solids air dengan Teknik dorong-tarik. Program Studi Sistem Komputer. Fakultas Teknik Elektronika dan Komputer. Universitas Kristen Satya Wacana. Salatiga.Wiono.A,Rahmawati. E, 2014.  Perancangan Dan Pembuatan Alat Ukur Konduktivitas Larutan Berbasis Mikrokontroler. Program Studi Fisika Fakultas MIPA Universitas Negeri Surabaya. Surabaya

scholarly journals Evaluation of Water Quality Parameters in Shatt AL-Arab, Southern Iraq, Using Spatial Analysis

Hydrology ◽  
2020 ◽  
Vol 7 (4) ◽  
pp. 79 ◽  
Author(s):  
Zahraa Q. Lateef ◽  
Abdul-Sahib T. Al-Madhhachi ◽  
Dawood E. Sachit
Keyword(s):  
Water Quality ◽  
Spatial Analysis ◽  
Arabian Gulf ◽  
Total Dissolved Solids ◽  
Quality Parameters ◽  
Data Availability ◽  
Water Quality Parameters ◽  
Total Hardness ◽  
Dissolved Solids ◽  
Southern Iraq

The present work illustrates the potential application of techniques of spatial analysis via geographic information systems (GIS) to categorize the distribution of temporal and spatial of water prediction characteristics to determine the water quality parameters of the Shatt Al-Arab River (SAA), southern Iraq. Eight main water quality parameters and three heavy metals were measured from December 2018 to October 2019. The total dissolved solids, chloride, sulfate, and total hardness were compared with previous data that were measured from 2014 to 2018 based on data availability. The geochemical characteristics were also investigated to analyze water quality parameters. The study was performed by selecting eleven stations according to the nature areas of SAA. Water samples were acquired from the eleven stations for four seasons (winter of 2018 through autumn of 2019). Results revealed that total dissolved solids ranged between 950 to 8500 mg/L, total hardness varied from 400 to 2394 mg/L as calcium carbonate (CaCO3), the sulfate ranged from 149 to 1602 mg/L, and chloride ranged from 330 to 3687 mg/L. The results showed that SAA had high salinity with a low hazard of sodicity. The SAA waters mainly fall below the Dolomite-Magnesite tie-lines which indicated the dissolution of carbonate rocks. This research also found that the study area confined from Al-Maqal station to Abu Flus port station where the salty marine water coming from the Arabian Gulf remains for longer periods. The SAA is not suitable for drinking and irrigation water according to Iraqi and World Health Organization (WHO) standards. This study suggested building a blocking dam downstream of the SAA to prevent salty water from coming back from Arabian Gulf.

Sign in / Sign up

Export Citation Format

Share Document