scholarly journals Evaluating the steady-state of twin tunnels of Pirtaghi dam power plant under earthquake loadings

2021 ◽  
Author(s):  
Saeed Jamali Zavareh ◽  
Narges Saadat Tayarani
Keyword(s):  
Steady State ◽  
Power Plant ◽  
Water Supply ◽  
Time Use ◽  
Seismic Loads ◽  
3D Numerical Modeling ◽  
Prone Area ◽  
Long Time ◽  
Dam Site ◽  
Twin Tunnels

The design of structures for a long time use represents a big challenge in the rock mechanics and tunneling works. The water supply of the Pirtaghi Dam reservoir-pumping power plant in Iran is provided by the twin tunnels. Since the Pirtaghi dam site is located in an earthquake-prone area, it will probably experience earthquakes in its lifetime. So, in this project, the steady-state of the support system of the twin tunnels of the water supply of the Pirtaghi power plant under likely earthquake and static loading is evaluated by a 3D numerical modeling. The results show that the system is capable to guarantee stability against seismic loads.

UNS R54620

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Titanium Alloy ◽  
High Temperature ◽  
Time Use ◽  
Temperature Stability ◽  
High Strength ◽  
Heat Treating ◽  
High Temperature Stability ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Long Time

Abstract UNS No. R54620 is an alpha-beta titanium alloy. It has an excellent combination of tensile strength, creep strength, toughness and high-temperature stability that makes it suitable for service to 1050 F. It is recommended for use where high strength is required. It has outstanding advantages for long-time use at temperatures to 800 F. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-86. Producer or source: Titanium alloy mills.

Effects of slide-to-roll ratio and varying velocity on the lubrication performance of grease at low speed

2021 ◽  
pp. 135065012199336
Author(s):  
Yiming Han ◽  
Jing Wang ◽  
Xuyang Jin ◽  
Shanshan Wang ◽  
Rui Zhang
Keyword(s):  
Steady State ◽  
Critical Speed ◽  
Industrial Applications ◽  
Transient Effects ◽  
Disintegration Time ◽  
Low Speed ◽  
Existence Time ◽  
Pure Rolling ◽  
Lubrication Performance ◽  
Long Time

Under steady-state pure rolling conditions with low speed, the thickener fiber agglomerations can be maintained for a long time, generating a beneficial thicker film thickness. However, in industrial applications, motions with sliding or transient effects are very common for gears, rolling-element bearings or even chain drives, evaluation of the grease performance under such conditions is vital for determining the lubrication mechanism and designing new greases. In this project, optical interferometry experiments were carried out on a ball-disk test rig to study the disintegration time of the grease thickener agglomerations with the increase of the slide-to-roll ratio under steady-state and reciprocation motions. Under steady-state conditions, the thickener fiber agglomeration can exist for a while and the time becomes shorter with the increase of the slide-to-roll ratio above the critical speed. Below the critical speed, the thickener fiber can exist in the contact in the form of a quite thick film for a very long time under pure rolling conditions but that time is decreased with the increase of the slide-to-roll ratio. The introduction of the transient effect can further reduce the existence time of the thickener.

Super-Fine Structure in the Critical Flow-Rate of Critical Flow Venturi Nozzles

2002 ◽  
Author(s):  
Masahiro Ishibashi
Keyword(s):  
Fine Structure ◽  
Steady State ◽  
Discharge Coefficient ◽  
Constant Pressure ◽  
Pressure Ratio ◽  
Critical Flow ◽  
Time Intervals ◽  
Critical Flow Rate ◽  
A Value ◽  
Long Time

It is shown that critical flow Venturi nozzles need time intervals, i.e., more than five hours, to achieve steady state conditions. During these intervals, the discharge coefficient varies gradually to reach a value inherent to the pressure ratio applied. When a nozzle is suddenly put in the critical condition, its discharge coefficient is trapped at a certain value then afterwards approaches gradually to the inherent value. Primary calibrations are considered to have measured the trapped discharge coefficient, whereas nozzles in applications, where a constant pressure ratio is applied for a long time, have a discharge coefficient inherent to the pressure ratio; inherent and trapped coefficients can differ by 0.03–0.04%.

scholarly journals A Chemical Reaction Can Save Mankind -A Review of Experiment Research on CO2+C=2CO and Application

2021 ◽  
Vol 13 (2) ◽  
pp. 1
Author(s):  
Jia-Min Jin
Keyword(s):  
Catalytic Activity ◽  
Power Plant ◽  
Chemical Reaction ◽  
Flue Gas ◽  
Physical Phenomenon ◽  
Experiment Research ◽  
Carbon Gasification ◽  
Long Time ◽  
Gasification Reaction ◽  
Climate Crisis

There are two contents of this article. The first is briefly to review the experiment research on the catalysis mechanism of Carbon Gasification Reaction-CGR(C+CO2=2CO) from 60s -90s. The results show that the catalytic phenomenon is physical phenomenon rather than chemical, and the catalyst does not participate in the chemical reaction. The catalytic activity and selectivity of catalyst are related to the electronegativity or energy level of the catalyst. The second is to clarify the applications of CGR for save mankind. The lime is first proposed to capture CO2 in flue gas of power plant. The lime can be recycled. The coal is used to convert CO2 from cement steel produce into CO, producing both energy and lime and iron. The capture CO2 is used to treat waste such as firewood and plastic, eliminate white pollution. The author considers that using the CGR which has been used for a long time can solve the three problems which people worry about: energy exhaustion, environmental pollution and climate crisis.

scholarly journals Borehole Rehabilitation: A Case Study in the Dunkwa Mining Town

2020 ◽  
Vol 20 (2) ◽  
pp. 11-17
Author(s):  
A. Ewusi ◽  
J. Seidu
Keyword(s):  
Water Supply ◽  
Central Region ◽  
Pumping Test ◽  
Implementation Cost ◽  
Mining Town ◽  
Long Time ◽  
Borehole Camera ◽  
The Cost ◽  
Very High

Rehabilitation works were carried out on boreholes in the Dunkwa Mining town in the Central Region of Ghana. These works were carried out because the boreholes had lost their original yields due to clogging, corrosion and encrustation and had been abandoned for a long time. The cost of drilling a new well and assessing the productivity of the well is $4,500 which is more expensive that carrying out rehabilitation works which is cheaper, about $800. Also, the initial yields of the boreholes were very high according to the feasibility report which is not a common characteristic of the rocks in the area. Camera inspection followed by rehabilitation, pre and post pumping tests were carried out to assess whether there has been an improvement in their yield after the exercise and that the yield obtained will be adequate for a water supply design. Results show that all the boreholes had an improvement in their yields (57.19 - 259.80 %) after the rehabilitation. It can therefore be concluded that rehabilitation is effective in restoring boreholes to their original yields. Organisations drilling boreholes to communities can take advantage of rehabilitation of the existing boreholes located in the communities which are high yielding, thereby reducing project implementation cost. Keywords: Borehole Rehabilitation, Borehole Yields, Borehole Camera Inspection, Pumping Test

scholarly journals A theoretical verification of the integral fluctuation theorem for accelerated colloidal systems in the long-time limit

2021 ◽  
Author(s):  
Yash Lokare
Keyword(s):  
Steady State ◽  
Time Scales ◽  
Numerical Study ◽  
Quantitative Description ◽  
Experimental Studies ◽  
Fluctuation Theorem ◽  
Nonequilibrium Steady States ◽  
Small Scale ◽  
Colloidal Systems ◽  
Long Time

A quantitative description of the violation of the second law of thermodynamics in relatively small classical systems and over short time scales comes from the fluctuation-dissipation theorem. It has been well established both theoretically and experimentally, the validity of the fluctuation theorem to small scale systems that are disturbed from their initial equilibrium states. Some experimental studies in the past have also explored the validity of the fluctuation theorem to nonequilibrium steady states at long time scales in the asymptotic limit. To this end, a theoretical and/or purely numerical model of the integral fluctuation theorem has been presented. An approximate general expression for the dissipation function has been derived for accelerated colloidal systems trapped/confined in power-law traps. Thereafter, a colloidal particle trapped in a harmonic potential (generated by an accelerating one-dimensional optical trap) and undergoing Brownian motion has been considered for the numerical study. A toy model of a quartic potential trap in addition to the harmonic trap has also been considered for the numerical study. The results presented herein show that the integral fluctuation theorem applies not only to equilibrium steady state distributions but also to nonequilibrium steady state distributions of colloidal systems in accelerated frames of reference over long time scales.

TRANSMITTING BIPARTITE AND MULTIPARTITE CORRELATIONS VIA SPIN CHAINS UNDER PHASE DECOHERENCE

2012 ◽  
Vol 10 (06) ◽  
pp. 1250073
Author(s):  
JIAN-FENG AI ◽  
JIAN-SONG ZHANG ◽  
AI-XI CHEN
Keyword(s):  
Steady State ◽  
Anisotropy Parameter ◽  
Quantum Correlations ◽  
Spin Chains ◽  
The Other ◽  
Bipartite Entanglement ◽  
Other Hand ◽  
Long Time ◽  
Phase Decoherence ◽  
The One

We investigate the transfer of bipartite (measured by cocurrence) and multipartite (measured by global discord) quantum correlations though spin chains under phase decoherence. The influence of phase decoherence and anisotropy parameter upon quantum correlations transfer is investigated. On the one hand, in the case of no phase decoherence, there is no steady state quantum correlations between spins. On the other hand, if the phase decoherence is larger than zero, the bipartite quantum correlations can be transferred through a Heisenberg XXX chain for a long time and there is steady state bipartite entanglement. For a Heisenberg XX chain, bipartite entanglement between two spins is destroyed completely after a long time. Multipartite quantum correlations of all spins are more robust than bipartite quantum correlations. Thus, one can store multipartite quantum correlations in spin chains for a long time under phase decoherence.

Sign in / Sign up

Export Citation Format

Share Document