scholarly journals Increase of the energy efficiency in paper industry

2008 ◽  
Vol 62 (4) ◽  
pp. 233-245
Author(s):  
Milorad Krgovic ◽  
Vladimir Valent ◽  
Marina Krsikapa ◽  
Miodrag Milojevic ◽  
Branko Raseta ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Energy Efficiency ◽  
Energy Consumption ◽  
Specific Heat ◽  
Paper Industry ◽  
Electric Energy ◽  
Paper Drying ◽  
Improve Energy Efficiency ◽  
Electric Energy Consumption ◽  
Paper Machines

In this work, phenomena of heat and mass transfer in process of paper drying are given, certain technology units are analyzed, while possibility for decrease of specific heat and electric energy consumption by modernization of technology is examined. Some of the solutions applied on paper machines worldwide in order to improve energy efficiency are shown. Theoretic and practical discoveries in this area are applied in Board factory UMKA, and these results are shown in the work as well.

scholarly journals Implementation of a Floating Head Pressure Condensation Control to Reduce Electrical Energy Consumption in an Industrial Refrigeration System

2021 ◽  
Vol 11 (24) ◽  
pp. 11923
Author(s):  
Fábio Luiz da Costa Carrir ◽  
Cesare Biserni ◽  
Danilo Barreto Aguiar ◽  
Elizaldo Domingues dos Santos ◽  
Ivoni Carlos Acunha Júnior
Keyword(s):  
Energy Consumption ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Electric Energy ◽  
Electrical Energy ◽  
Industrial Facilities ◽  
Improve Energy Efficiency ◽  
Electric Energy Consumption ◽  
Industrial Refrigeration

The growing global demand for energy and the costly taxes on electric energy demonstrate the importance of seeking new techniques to improve energy efficiency in industrial facilities. Refrigeration units demand a large amount of electricity due to the high power needs of the components of the system. One strategy to reduce the electric energy consumption in these facilities is pressure condensation control. The objective here was to develop a logical control model where the physical quantities in the thermodynamic process can be monitored and used to determine the optimum point of the condensation pressure and the mass flow rate of the air in the evaporative condenser. The algorithm developed was validated through experiments and was posteriorly implemented in an ammonia industrial system of refrigeration over a period of sixteen months (480 days). The results showed that the operation of the evaporative condenser with a controlled air mass flow rate by logical modeling achieved a reduction of 7.5% in the consumption of electric energy, leading to a significant reduction in the operational cost of the refrigeration plant.

scholarly journals Internet of Things Based on Situation-Awareness for Energy Efficiency

2019 ◽  
Vol 12 (1) ◽  
pp. 28-53 ◽  
Author(s):  
Un Hee Schiefelbein ◽  
Diovane Soligo ◽  
Vinícius Maran ◽  
José Palazzo M. De Oliveira ◽  
João Carlos Damasceno Lima ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Internet Of Things ◽  
Environmental Impact ◽  
Real Time ◽  
Situation Awareness ◽  
Electric Energy ◽  
Energy Expenditures ◽  
Electric Energy Consumption

The reduction of electric energy consumption is considered as one of the main challenges in diverse sectors of the economy. To residential customers, the management of energy consumption can bring significant costs reduction and decreased environmental impact. This work presents a solution based on the use of situation-awareness applied in IOT that helps the users to reduce the consumption of electric energy through its own residence. The practical results obtained in the application of this proposal in a real-live scenario confirmed the option of collecting information directly of electrical appliances and inform the user of their energy expenditures in real-time, allowing the knowledge and the management of their expenses.

scholarly journals Study on the energy overview of the industrial beverage sector in Colombia

2021 ◽  
Vol 10 (7) ◽  
pp. 357-371
Author(s):  
Jhan Piero Rojas ◽  
Mawency Vergel ◽  
Martha Sofia Orjuela Abril
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Latin American ◽  
Electric Energy ◽  
Clean Energy ◽  
Industrial Sector ◽  
Energy Sources ◽  
Improve Energy Efficiency ◽  
Latin American Region ◽  
Polluting Emissions

In the Latin American region, the issues of efficiency in energy consumption and clean energy sources become more important every day, and worldwide, these issues are of great importance because a progressive change in the use of energy is required for reasons such as climate change, polluting emissions and forecasting of a shortage of fossil or non-renewable fuel reserves. The Colombian government is no stranger to these issues, and since 2001, energy efficiency plans have been implemented, creating a nationwide program for the proper use of energy sources that seeks, through analysis of the national energy landscape, the implementation of technical and technological actions that improve energy efficiency in all sectors of the country. This paper shows the study made to the industry of (number of companies) in the beverage sector, which characterized the use of different types of energy such as natural gas and electric energy and the transformation of these in their processes of production, which seeks to determine how efficiently the potential of energy resources is used. Only in the energy consumption for lighting were savings potentials of up to 50% detected. It is also shown how, through legislation and studies conducted under the direction of the Energy Mining Planning Unit, the aim is to have a more competitive industrial sector against international markets, specifically taking the industrial sector of beverage production as a sample.

Measurements of electric energy consumption in a low energy building in Slovak climatic conditions

2012 ◽  
Vol 7 (3) ◽  
pp. 23-32 ◽  
Author(s):  
Miloslav Bagoňa ◽  
Dušan Katunský ◽  
Martin Lopušniak ◽  
Marián Vertaľ
Keyword(s):  
Energy Consumption ◽  
Electric Energy ◽  
Climatic Conditions ◽  
Low Energy ◽  
Electric Energy Consumption

scholarly journals Traffic Light Priority for Trams in Warsaw as a Tool for Transport Policy and Reduction of Energy Consumption

2021 ◽  
Vol 13 (8) ◽  
pp. 4180
Author(s):  
Andrzej Czerepicki ◽  
Tomasz Krukowicz ◽  
Anna Górka ◽  
Jarosław Szustek
Keyword(s):  
Control System ◽  
Energy Consumption ◽  
Electric Energy ◽  
Fixed Time ◽  
Pollutant Emissions ◽  
Computer Simulation Model ◽  
Traffic Light ◽  
Electric Energy Consumption ◽  
Time Control ◽  
Reduction Of Energy Consumption

The article presents an analysis of priority solutions for trams at a selected sequence of intersections in Warsaw (Poland). An analysis of the literature has shown the topicality of this issue. A computer simulation model of a coordinated sequence of intersections was constructed. Three test scenarios were designed: the existing control system, the new coordinated fixed-time control system, and the adaptive control system with active priority. In the simulation process, detailed travel characteristics of trams and other traffic participants in a selected section were obtained for the three varying scenarios. Electric energy consumption for traction needs and pollutant emissions was then estimated for each of the variants. It was concluded that for the analyzed configuration, implementation of the adaptive priority will result in a reduction of tram time losses by up to 25%, a reduction in energy consumption by up to 23%, and a reduction in the emission of pollutants from individual vehicles by up to 3% in relation to the original variant. The conducted research may be the basis for a comprehensive method of assessing the effectiveness of applying the adaptative priority when designing new tramway lines and modernizing the existing ones.

scholarly journals AUDIT ENERGI PADA SEBUAH HOTEL

2012 ◽  
Vol 16 (3) ◽  
pp. 131
Author(s):  
Didik Ariwibowo
Keyword(s):  
Energy Consumption ◽  
Air Conditioning ◽  
Energy Savings ◽  
Electric Energy ◽  
Electrical Energy ◽  
Hot Water ◽  
Electrical Energy Consumption ◽  
Energy Audit ◽  
Electric Energy Consumption ◽  
Pumping System

Didik Ariwibowo, in this paper explain that energy audit activities conducted through several phases, namely: the initial audit, detailed audit, analysis of energy savings opportunities, and the proposed energy savings. Total energy consumed consists of electrical energy, fuel, and materials in this case is water. Electrical energy consumption data obtained from payment of electricity accounts for a year while consumption of fuel and water obtained from the payment of material procurement. From the calculation data, IKE hotels accounted for 420.867 kWh/m2.tahun, while the IKE standards for the hotel is 300 kWh/m2.tahun. Thus, IKE hotel included categorized wasteful in energy usage. The largest energy consumption on electric energy consumption. Largest electric energy consumption is on the air conditioning (AC-air conditioning) that is equal to 71.3%, and lighting and electrical equipment at 27.28%, and hot water supply system by 4.44%. Electrical energy consumption in AC looks very big. Ministry of Energy and Mineral Resources of the statutes, the profile of energy use by air conditioning at the hotel by 48.5%. With these considerations in the AC target for audit detail as the next phase of activity. The results of a detailed audit analysis to find an air conditioning system energy savings opportunities in pumping systems. Recommendations on these savings is the integration of automation on the pumping system and fan coil units (FCU). The principle of energy conservation in the pumping system is by installing variable speed drives (VSD) pump drive motor to adjust speed according to load on the FCU. Load variations FCU provide input on the VSD pumps to match. Adaptation is predicted pump can save electricity consumption up to 65.7%. Keywords: energy audit, IKE, AC

scholarly journals Technological Energy Efficiency Improvements in Cement Industries

2021 ◽  
Vol 13 (7) ◽  
pp. 3810
Author(s):  
Alessandra Cantini ◽  
Leonardo Leoni ◽  
Filippo De Carlo ◽  
Marcello Salvio ◽  
Chiara Martini ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Descriptive Analysis ◽  
Cement Industry ◽  
Cement Plant ◽  
Improve Energy Efficiency ◽  
Energy Needs ◽  
Industrial Energy ◽  
Industrial Energy Consumption ◽  
Alternative Solutions

The cement industry is highly energy-intensive, consuming approximately 7% of global industrial energy consumption each year. Improving production technology is a good strategy to reduce the energy needs of a cement plant. The market offers a wide variety of alternative solutions; besides, the literature already provides reviews of opportunities to improve energy efficiency in a cement plant. However, the technology is constantly developing, so the available alternatives may change within a few years. To keep the knowledge updated, investigating the current attractiveness of each solution is pivotal to analyze real companies. This article aims at describing the recent application in the Italian cement industry and the future perspectives of technologies. A sample of plant was investigated through the analysis of mandatory energy audit considering the type of interventions they have recently implemented, or they intend to implement. The outcome is a descriptive analysis, useful for companies willing to improve their sustainability. Results prove that solutions to reduce the energy consumption of auxiliary systems such as compressors, engines, and pumps are currently the most attractive opportunities. Moreover, the results prove that consulting sector experts enables the collection of updated ideas for improving technologies, thus giving valuable inputs to the scientific research.

Sign in / Sign up

Export Citation Format

Share Document