scholarly journals Influence of current and temperature on discharge characteristics of electrochemical nickel−cadmium system

2010 ◽  
Vol 64 (4) ◽  
pp. 319-335
Author(s):  
Andreja Todorovic ◽  
Branimir Grgur ◽  
Jelena Rajovic
Keyword(s):  
Electrical Resistance ◽  
Electromotive Force ◽  
Time Range ◽  
Power Losses ◽  
Load Current ◽  
Full Load ◽  
Temperature Range ◽  
The Given ◽  
Nickel Cadmium

The paper elaborates determination of characteristic values in the discharging process of non-hermetic nickel-cadmium galvanic battery with nominal voltage Un = 60 V and nominal capacity qn = C5 = 190 Ah and its dependence from current and temperature. Study has been performed with the set of experimental metering of voltages, electromotive force, current from discharge time range and electromotive force in steady state regime before and after battery charging. Electromotive force characteristics are obtained by using the Nernst?s equation, while the least square method was used to determine the average values of internal electrical resistivity, power losses and efficiency level. These results were used in the approximate exponential functions to determine the range dependence of the efficiency level from the internal electrical resistance of discharge current in reliance from the temperature range. Obtained results show that, in accordance to the given voltage variation of 10% Un, this type of battery holds maximal full load current of one hour capacity at the temperature of 25?C and maximal full load current of two hours capacity at the temperature of ?30?C. The methodology used in the case study covers determination of the electromotive force in time range based on the metered results of values during complete battery fullness and emptiness with prior determination of equilibrium constants of galvanic battery reaction through method suggested by the author of this paper. Further process, using the electromotive force values obtained through the aforementioned process, the metered current, and approximate polynomial function of the nominal discharge voltage characteristic determines range of battery internal electric resistance from time, followed by the selection of discharge cases with average values for: voltage, electromotive force, internal electrical resistance, available and utilized power, power losses, and battery efficiency level. An overview of the obtained characteristics for analyzed battery and their comparison with the producers prescribed values and standards led to gaining of the valuable data that show how and in what measure do current and temperature influence the discharge characteristic of non-hermetic nickel-cadmium batteries with an especial observation of internal electrical resistance and battery efficiency level. Obtained results show that electrochemical power sources may provide electric energy with prescribed quality and quantity, with high level of work reliability, as well as with all other positive technical and economic effects within the given current-temperature range.

The Role and Place of Budget Procedure in the System

2003 ◽  
pp. 42-49 ◽  
Author(s):  
E. Bushmin
Keyword(s):  
Budget Process ◽  
Public Expenditures ◽  
Principal Role ◽  
Process Trends ◽  
The Given ◽  
Rules Of The Game

The article is devoted to the analysis of improving budget process trends. The author offers the concept of "financial technologism". Its usage should promote an essential improvement of the budget process. The given concept is based on the fact that the regulation of budget procedure is the process of determination of "rules of the game", and the order of interaction of different institutions within the framework of the budget process, and the trends and volumes of expenses are the strategy of institutions. The procedure within the budget process plays a principal role as compared with the trends and volumes of public expenditures.

MODIFIKASI MODEL PEMBELAJARAN TEAM ASSISTED INDIVIDUALIZATION DENGAN STRATEGI PEMBELAJARAN TUGAS DAN PAKSA

2019 ◽  
Vol 2 ◽  
Author(s):  
Lea Christy Restu Kinasih ◽  
Dewi Fatimah ◽  
Veranica Julianti
Keyword(s):  
Cooperative Learning ◽  
Learning Strategies ◽  
Learning Process ◽  
Learning Model ◽  
Learning Models ◽  
Classroom Learning ◽  
Quality Of Learning ◽  
The Given

The selection and determination of appropriate learning strategies can improve the results to be obtained from the application of classroom learning models. This writing aims to discipline students to develop individual abilities of students to be more active in the learning process and improve the quality of learning. The learning process in Indonesia in general only uses conventional learning models that make students passive and undeveloped. In order for the quality of learning to increase, the Team Assisted Individualization learning model is combined with the task learning and forced strategies. The Team Assisted Individualization cooperative learning model is one of the cooperative learning models that combines learning individually and in groups. Meanwhile, task and forced learning strategies are strategies that focus on giving assignments that require students to complete them on time so that the learning process can run effectively. Students are required to do assignments according to the given deadline. This makes students become familiar with the tasks given by the teacher. Combining or modifying the learning model of the assisted individualization team with forced and forced learning strategies is expected to be able to make students more active, disciplined, independent, creative in learning and responsible for the tasks assigned. Therefore this method of incorporation is very necessary in the learning process and can be applied to improve the quality of learning in schools.

MANUFACTURE INVESTIGATION OF CARTRIDGE WITH BOTTOM-MOST PART FLANGE BY DIRECT EXTRUSION WITH COUNTERPUNCH. REPORT 13. DETERMINATION OF DEFORMED STATE UNDER STRAITENED EXTRUSION IN FOURTH CENTRAL AREA OF PLASTIC DEFORMATION

2020 ◽  
Vol 0 (4) ◽  
pp. 43-51
Author(s):  
A. L. Vorontsov ◽  
◽  
I. A. Nikiforov ◽  
Keyword(s):  
Plastic Deformation ◽  
Plastic Flow ◽  
Central Area ◽  
Direct Extrusion ◽  
Deformed State ◽  
Cumulative Deformation ◽  
The Given ◽  
General Method

Formulae have been obtained that are necessary to calculate cumulative deformation in the process of straitened extrusion in the central area closed to the working end of the counterpunch. The general method of plastic flow proposed by A. L. Vorontsov was used. The obtained formulae allow one to determine the deformed state of a billet in any point of the given area. The formulae should be used to take into account the strengthening of the extruded material.

Influence of a chemical preparation of triazole50% cs on sowing the winter wheat against rust

2020 ◽  
Vol 3 (9) ◽  
pp. 231-233
Author(s):  
AliyevSh.K. ◽  
TuychiyevI.U ◽  
Karimov N ◽  
Umaraliev.M.I
Keyword(s):  
Winter Wheat ◽  
Field Experiments ◽  
Yellow Rust ◽  
Biological Efficiency ◽  
Chemical Preparation ◽  
Seed Growth ◽  
Biological Farming ◽  
The Given ◽  
Farming Efficiency

The article is focused on the data of the carried works on studying biological efficiency of fungi Triazole 50% on sowing the winter wheat against yellow rust as well as on the height, development and fertility of the wheat. On May 5, 2019 from 9 to 10 o’clock under the temperature 21-23 field experiments of Triazol 50% CS manufactured by the firm “Agroximstar” (Uzbekistan) were carried out on winter wheat as a protector of seeds of winter wheat of Pervitsa sort against the disease of yellow rustin the irrigated conditions in an experimental field of the Institute “Istiklal” of Andijan district of Andijan region. The aim of the given research is to study biological-farming efficiency and determination of optimal norms of preparation expenses and to study the influence of fungicide on the height and development as well as on the fertility of the wheat. The received data showed that the preparation Triazole 50% CS effected on the pathogen of yellow rust favorably and besides that it didn’t effect on seed growth and energy of growth negatively.

Metabolic response to temperature stress in the Colombian freshwater crab Neostrengeria macropa (H. Milne Edwards, 1853) (Decapoda: Brachyura: Pseudothelphusidae)

2021 ◽  
Author(s):  
David M Hudson
Keyword(s):  
Metabolic Response ◽  
Infrastructure Development ◽  
Predator Prey ◽  
Temperature Range ◽  
Indicator Group ◽  
Response To Temperature ◽  
Performance Results ◽  
The City ◽  
The Ideal

Abstract Freshwater crustaceans are distributed throughout the montane and lowland areas of Colombia, and are therefore a useful indicator group for how aquatic species will respond to climate change. As such, metabolic determination of physiological performance was evaluated for the Colombian pseudothelphusid crab, Neostrengeria macropa (H. Milne Edwards, 1853), over a temperature range inclusive of current temperatures and those predicted by future scenarios in the plateau around the city of Bogotá, namely from 8 °C to 30 °C. The performance results mostly aligned with previous exploratory behavioral determination of the ideal temperature range in the same species, although the metabolism increased at the highest temperature treatments, a point when exploratory behavior declined. These results indicate that this species of montane crab behaviorally compensates for increased thermal stress by decreasing its physical activity, which could have negative predator-prey consequences with changes to community structure as different species undergo climate-mediated geographic range shifts in the region. As this species is endemic to the plateau surrounding Bogotá, it also experiences a number of other stressors to its survival, including infrastructure development and invasive species.

Sign in / Sign up

Export Citation Format

Share Document