scholarly journals Curing kinetics of two commercial urea-formaldehyde adhesives studied by isoconversional method

2011 ◽  
Vol 65 (6) ◽  
pp. 717-726 ◽  
Author(s):  
Mladjan Popovic ◽  
Jaroslava Budinski-Simendic ◽  
Mirjana Jovicic ◽  
Joszef Mursics ◽  
Milanka Djiporovic-Momcilovic ◽  
...  
Keyword(s):  
Activation Energy ◽  
Urea Formaldehyde ◽  
Curing Kinetics ◽  
Isoconversional Methods ◽  
Isoconversional Method ◽  
Reaction Enthalpy ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Dsc Measurements ◽  
Kinetics Of

Differential scanning calorimetry (DSC) was used to evaluate the curing kinetics of two commercial urea-formaldehyde (UF) adhesives having different formaldehyde to urea (F/U) ratio of 1.112 (UF1) and 1.086 (UF2). DSC measurements were done in dynamic scanning regime with heating rates of 5, 10, 15 and 20?C?min-1 in order to determine the activation energy for each adhesive. Obtained data were analyzed using isoconversional methods with application of Ozawa-Flynn-Wall and Kissinger-Akahira-Sunose kinetic models. In addition, different catalyst levels were tested at the heating rate of 10?C/min. Results showed that the adhesive with higher F/U ratio achieved higher activation energy, while having lower peak temperature of curing reaction. It was also noticed that the increase of catalyst level influenced the increase of reaction enthalpy of the adhesive with lower F/U ratio.

scholarly journals Epoxy/Ionic Liquid-Modified Mica Nanocomposites: Network Formation–Network Degradation Correlation

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1990
Author(s):  
Maryam Jouyandeh ◽  
Vahideh Akbari ◽  
Seyed Mohammad Reza Paran ◽  
Sébastien Livi ◽  
Luanda Lins ◽  
...  
Keyword(s):  
Activation Energy ◽  
Network Formation ◽  
Isoconversional Methods ◽  
Epoxide Ring ◽  
Segmental Motion ◽  
Heating Rates ◽  
Epoxy Nanocomposites ◽  
Scanning Calorimetry ◽  
Amine Curing ◽  
Kinetics Of

We synthesized pristine mica (Mica) and N-octadecyl-N’-octadecyl imidazolium iodide (IM) modified mica (Mica-IM), characterized it, and applied it at 0.1–5.0 wt.% loading to prepare epoxy nanocomposites. Dynamic differential scanning calorimetry (DSC) was carried out for the analysis of the cure potential and kinetics of epoxy/Mica and epoxy/Mica-IM curing reaction with amine curing agents at low loading of 0.1 wt.% to avoid particle aggregation. The dimensionless Cure Index (CI) was used for qualitative analysis of epoxy crosslinking in the presence of Mica and Mica-IM, while qualitative cure behavior and kinetics were studied by using isoconversional methods. The results indicated that both Mica and Mica-IM improved the curability of epoxy system from a Poor to Good state when varying the heating rate in the interval of 5–15 °C min−1. The isoconversional methods suggested a lower activation energy for epoxy nanocomposites with respect to the blank epoxy; thus, Mica and Mica-IM improved crosslinking of epoxy. The higher order of autocatalytic reaction for epoxy/Mica-IM was indicative of the role of liquid crystals in the epoxide ring opening. The glass transition temperature for nanocomposites containing Mica and Mica-IM was also lower than the neat epoxy. This means that nanoparticles participated the reaction because of being reactive, which decelerated segmental motion of the epoxy chains. The kinetics of the thermal decomposition were evaluated for the neat and mica incorporated epoxy nanocomposites epoxy with varying Mica and Mica-IM amounts in the system (0.5, 2.0 and 5.0 wt.%) and heating rates. The epoxy/Mica-IM at 2.0 wt.% of nanoparticle showed the highest thermal stability, featured by the maximum value of activation energy devoted to the assigned system. The kinetics of the network formation and network degradation were correlated to demonstrate how molecular-level transformations can be viewed semi-experimentally.

scholarly journals Non-Isothermal Sublimation Kinetics of 2,4,6-Trinitrotoluene (TNT) Nanofilms

Molecules ◽  
2019 ◽  
Vol 24 (6) ◽  
pp. 1163 ◽  
Author(s):  
Walid Hikal ◽  
Brandon Weeks
Keyword(s):  
Activation Energy ◽  
Analytical Techniques ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Absorbance Spectroscopy ◽  
Calculated Activation Energy ◽  
Sublimation Kinetics ◽  
Sublimation Rates ◽  
First Time ◽  
Kinetics Of

Non-isothermal sublimation kinetics of low-volatile materials is more favorable over isothermal data when time is a crucial factor to be considered, especially in the subject of detecting explosives. In this article, we report on the in-situ measurements of the sublimation activation energy for 2,4,6-trinitrotoluene (TNT) continuous nanofilms in air using rising-temperature UV-Vis absorbance spectroscopy at different heating rates. The TNT films were prepared by the spin coating deposition technique. For the first time, the most widely used procedure to determine sublimation rates using thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) was followed in this work using UV-Vis absorbance spectroscopy. The sublimation kinetics were analyzed using three well-established calculating techniques. The non-isothermal based activation energy values using the Ozawa, Flynn–Wall, and Kissinger models were 105.9 ± 1.4 kJ mol−1, 102.1 ± 2.7 kJ mol−1, and 105.8 ± 1.6 kJ mol−1, respectively. The calculated activation energy agreed well with our previously reported isothermally-measured value for TNT nanofilms using UV-Vis absorbance spectroscopy. The results show that the well-established non-isothermal analytical techniques can be successfully applied at a nanoscale to determine sublimation kinetics using absorbance spectroscopy.

Study on Curing Kinetics of MEP-15/593/660 System

2014 ◽  
Vol 988 ◽  
pp. 31-35
Author(s):  
Jia Le Song ◽  
Chan Chan Li ◽  
Zhi Mi Zhou ◽  
Chao Qiang Ye ◽  
Wei Guang Li
Keyword(s):  
Activation Energy ◽  
Differential Scanning Calorimetry ◽  
Kinetic Parameters ◽  
Curing Kinetics ◽  
Conversion Ratio ◽  
Scanning Calorimetry ◽  
Degree Of Cure ◽  
Curing Kinetic ◽  
The Relationship ◽  
Kinetics Of

Curing kinetics of MEP-15/593 system and MEP-15/593/660 system is studied by means of differential scanning calorimetry (DSC). Curing kinetic parameters are evaluated and the relationship between diluent 660 and the curing properties is investigated. The results show that the diluent 660 can not only reduce viscosity and activation energy, but also improve the degree of cure and conversion ratio.

scholarly journals Thermal Analysis On The Kinetics Of Magnesium-Aluminum Layered Double Hydroxides In Different Heating Rates

2015 ◽  
Vol 60 (2) ◽  
pp. 1357-1359 ◽  
Author(s):  
Y. Hongbo ◽  
C. Meiling ◽  
W. Xu ◽  
G. Hong
Keyword(s):  
Activation Energy ◽  
Thermal Analysis ◽  
Layered Double Hydroxides ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Exponential Factor ◽  
Thermal Kinetic Parameters ◽  
Double Hydroxides ◽  
Kinetics Of ◽  
Dsc Curves

Abstract The thermal decomposition of magnesium-aluminum layered double hydroxides (LDHs) was investigated by thermogravimetry analysis and differential scanning calorimetry (DSC) methods in argon environment. The influence of heating rates (including 2.5, 5, 10, 15 and 20K/min) on the thermal behavior of LDHs was revealed. By the methods of Kissinger and Flynn-Wall-Ozawa, the thermal kinetic parameters of activation energy and pre-exponential factor for the exothermic processes under non-isothermal conditions were calculated using the analysis of corresponding DSC curves.

scholarly journals Kissinger Method in Kinetics of Materials: Things to Beware and Be Aware of

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2813 ◽  
Author(s):  
Sergey Vyazovkin
Keyword(s):  
Activation Energy ◽  
Isoconversional Methods ◽  
Single Step ◽  
Order Reaction ◽  
Kissinger Method ◽  
Scanning Calorimetry ◽  
First Order ◽  
Kinetics Of ◽  
Final Equation ◽  
Derivative Thermogravimetry

The Kissinger method is an overwhelmingly popular way of estimating the activation energy of thermally stimulated processes studied by differential scanning calorimetry (DSC), differential thermal analysis (DTA), and derivative thermogravimetry (DTG). The simplicity of its use is offset considerably by the number of problems that result from underlying assumptions. The assumption of a first-order reaction introduces a certain evaluation error that may become very large when applying temperature programs other than linear heating. The assumption of heating is embedded in the final equation that makes the method inapplicable to any data obtained on cooling. The method yields a single activation energy in agreement with the assumption of single-step kinetics that creates a problem with the majority of applications. This is illustrated by applying the Kissinger method to some chemical reactions, crystallization, glass transition, and melting. In the cases when the isoconversional activation energy varies significantly, the Kissinger plots tend to be almost perfectly linear that means the method fails to detect the inherent complexity of the processes. It is stressed that the Kissinger method is never the best choice when one is looking for insights into the processes kinetics. Comparably simple isoconversional methods offer an insightful alternative.

MODEL FREE KINETICS ANALYSIS OF IMPERATA CYLINDRICA (LALANG)

2016 ◽  
Vol 78 (8-3) ◽  
Author(s):  
Olagoke Oladokun ◽  
Arshad Ahmad ◽  
Tuan Amran Tuan Abdullah ◽  
Bemgba Bevan Nyakuma ◽  
Syie Luing Wong
Keyword(s):  
Activation Energy ◽  
Biomass Conversion ◽  
Frequency Factor ◽  
Isoconversional Methods ◽  
Green Energy ◽  
Imperata Cylindrica ◽  
Heating Rates ◽  
Model Free ◽  
Solid Biofuel ◽  
Kinetics Of

This study is the first attempt at investigating the solid state decomposition and the devolatilization kinetics of Imperata cylindrica (lalang) grass termed the “farmer’s nightmare weed” as a potential solid biofuel of the future. Biomass conversion technologies such as pyrolysis and gasification can be utilized for future green energy needs. However an important step in the efficient utilization and process optimizing of biomass conversion processes is understanding the thermal decomposition kinetics of the feedstock. Consequently, thermogravimetric analysis (TGA) of Imperata cylindrica was carried out in the temperature range of 30-1000 °C at four heating rates of 5, 10, 15, and 20 K min-1 using Nitrogen at a flow rate of 20 L min-1 as purge gas. Using the TGA results, the kinetic parameters activation energy (Ea) and pre-exponential frequency factor (ko) of the grass were estimated via the model free or isoconversional methods of Kissinger and Starink. The results obtained for Kissinger model were 151.36 kJ moI-1 and 5.83 x 109 min-1 for activation energy and pre-exponential frequency factor respectively. However, Starink model activation energy and pre-exponential frequency factor were a function of conversion (α) with average values of 159.93 kJ mol-1 and 6.33 x 1022 min-1 respectively. 

Influence of carbon nanofillers on the curing kinetics of epoxy-amine resin

RSC Advances ◽  
2015 ◽  
Vol 5 (110) ◽  
pp. 90437-90450 ◽  
Author(s):  
L. Vertuccio ◽  
S. Russo ◽  
M. Raimondo ◽  
K. Lafdi ◽  
L. Guadagno
Keyword(s):  
Activation Energy ◽  
Curing Kinetics ◽  
Isoconversional Method ◽  
Epoxy Amine ◽  
Carbon Nanofillers ◽  
Advanced Isoconversional Method ◽  
Kinetics Of

Variation of the activation energy with conversion obtained by “advanced isoconversional method”.

Decomposition Kinetics of Switchgrass: Estimating Activation Energy

2014 ◽  
Vol 881-883 ◽  
pp. 726-733
Author(s):  
Gui Ying Xu ◽  
Jiang Bo Wang ◽  
Ling Ping Guo ◽  
Guo Gang Sun
Keyword(s):  
Activation Energy ◽  
Thermal Decomposition ◽  
Apparent Activation Energy ◽  
High Purity ◽  
Isoconversional Methods ◽  
Decomposition Kinetics ◽  
Heating Rates ◽  
Model Free ◽  
Chemical Utilization ◽  
Kinetics Of

TG analysis was used to investigate the thermal decomposition of switchgrass, which is a potential gasification feedstock. 10 mg switchgrass sample with the particles between 0.45 and 0.70 mm was linearly heated to 873 K at heating rates of 10, 20, 30 K/min, respectively, under high-purity nitrogen. The Kissinger method and three isoconversional methods including Friedman, Flynn-wall-Ozawa, Vyazovkin and Lenikeocink methods were used to estimate the apparent activation energy of switchgrass. With the three isoconversional methods, it can be concluded that the activation energy increases with increasing conversion. The four model free methods reveal activation energies in the range of 70-460 kJ/mol. These activation energy values provide the basic data for the thermo-chemical utilization of the switchgrass.

Crystallization Kinetics in Cu64.5Zr35.5 Binary Metallic Glass

2017 ◽  
Vol 727 ◽  
pp. 233-238 ◽  
Author(s):  
Qian Gao ◽  
Zeng Yun Jian ◽  
Jun Feng Xu ◽  
Man Zhu
Keyword(s):  
Activation Energy ◽  
Grain Growth ◽  
Crystallization Kinetics ◽  
Crystallization Process ◽  
Crystallization Kinetic ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Growth Activation ◽  
Local Activation Energy ◽  
Kinetics Of

The crystallization kinetics of melt-spun Cu64.5Zr35.5 amorphous alloy ribbons was investigated using differential scanning calorimetry (DSC) at different heating rates. Besides, the Kissinger and isoconversional approaches were used to obtain the crystallization kinetic parameters. As shown in the results, the activation energies for glass transition and crystallization process at the onset, peak and end crystallization temperatures were obtained by means of Kissinger equation to be 577.65 ± 34, 539.86 ± 54, 518.25 ± 20 and 224.84 ± 2 kJ/mol, respectively. The nucleation activation energy Enucleation is greater than grain growth activation energy Egrowth, indicating that the nucleation process is harder than grain growth. The local activation energy Eα decreases in the whole crystallization process, which suggests that crystallization process is increasingly easy.

Non-Isothermal Degradation Kinetics of Asphalt in Relation to its Chemical Composition

2016 ◽  
Vol 701 ◽  
pp. 315-319
Author(s):  
Kevinilo P. Marquez ◽  
Rheo B. Lamorena-Lim
Keyword(s):  
Chemical Composition ◽  
Degradation Kinetics ◽  
Isoconversional Methods ◽  
Isoconversional Method ◽  
Conversion Degree ◽  
Gradual Change ◽  
Scanning Calorimetry ◽  
Variable Nature ◽  
Increasing Temperature ◽  
Kinetics Of

Analysis of the complex and variable nature of the chemical composition of asphalt has been a challenge to engineers and scientists, especially as a means to understand its behavior and suggest ways to improve its properties. In this study, the thermal behavior and the non-isothermal degradation kinetics were analyzed using the isoconversional methods, through Thermogravimetric analysis (TGA) and Differential Scanning Calorimetry (DSC). TGA and DSC data show gradual change in the mass of the material at increasing temperature, suggesting behavior typical of a homogenous mixture. Kinetic analysis from the TGA data using the Starink modification of the Kissinger-Akahira-Sunose Isoconversional method show an apparent increase in the magnitude of the activation energies at different conversion degree, which suggests a gradual change in the composition of the material at each successive conversion due to a single heat-promoted transformation of each of the components.

Sign in / Sign up

Export Citation Format

Share Document