scholarly journals Manufacturing process of high quality phytopreparation on example of herbal sedative

2013 ◽  
Vol 66 (3-4) ◽  
pp. 170-176
Author(s):  
Sofija Djordjevic ◽  
Aleksandra Dickov ◽  
Sava Pavkov ◽  
Vanja Tadic ◽  
Ivana Arsic ◽  
...  

Introduction. Rational phytotherapy is a modern concept of using plant-originated drugs which has emerged from the need to improve phytotherapy in order to make the use of herbal remedies more efficient and safer. The aim of this study was to give the health-care workers more information on the manufacturing process of high quality phytopreparation following principles of Good Manufacturing Practice and Good Laboratory Practice on the example of herbal sedative, Odoval S? capsules. Material and Methods. This study was designed to reflect the production process of a high-quality and safe herbal remedy, starting from defining the formulation and the production procedure to the quality control of raw materials, characterization of the final product, and testing stability of active ingredients in the capsules. Results. Formulation of the phytopreparation, validation of the production process, quality control and stability testing, all together have resulted in the production of capsules with defined valeric acid content (1 mg valeric acid per capsule). Discussion. The preparation is recommended to relieve the symptoms caused by chronic stress (anxiety, irritability, fatigue, lack of concentration, heart palpitations) and for mild insomnia. Conclusion. This paper presents the complete cycle of the production of a phytopreparation on the example of a new herbal sedative - Odoval S? capsules.


2021 ◽  
pp. 1-11
Author(s):  
Song Gang ◽  
Wang Xiaoming ◽  
Wu Junfeng ◽  
Li Shufang ◽  
Liu Zhuowen ◽  
...  

In view of the production quality management of filter rods in the manufacturing and execution process of cigarette enterprises, this paper analyzes the necessity of implementing the manufacturing execution system (MES) in the production process of filter rods. In this paper, the filter rod quality system of cigarette enterprise based on MES is fully studied, and the constructive information management system demand analysis, cigarette quality control process, system function module design, implementation and test effect are given. This paper utilizes the Fuzzy analytic hierarchy process to find the optimal system for processing the manufacturing of cigarette. The implementation of MSE based filter rod quality information management system for a cigarette enterprise ensures the quality control in the cigarette production process. Through visualization, real-time and dynamic way, the information management of cigarette production is completed, which greatly improves the quality of cigarette enterprise manufacturing process.



Plants ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2023
Author(s):  
Suwimol Thariwong ◽  
Aekkhaluck Intharuksa ◽  
Panee Sirisa-ard ◽  
Wannaree Charoensup ◽  
Sunee Chansakaow

The Pikad Tri-phol-sa-mut-than (TS) remedy, a Thai traditional medicine, is officially recorded in Tamra Paetsart Sonkrau Chabub Anurak for its capabilities in treating kidney deficiency. TS remedy is composed of three fruit species—Aegle marmelos (L.) Corrêa., Coriandrum sativum L., and Morinda citrifolia L.—in an equal part by weight. The quality of the raw material is one of the essential factors that can affect the effectiveness and safety of treatment by herbal remedy. The pharmacognostic evaluation and DNA barcode of the three fruit species and TS remedy were performed in this study to authenticate them from contamination, and to provide the scientific database for further uses. Macroscopic and microscopic examination, chemical profile by TLC, and DNA barcoding were employed to positively identify the raw materials bought from the herbal market, especially the powder form. Consequently, the outcomes of this investigation can be used to develop an essential and effective tool for the authentication of crude drugs and herbal remedies.



2014 ◽  
Vol 611 ◽  
pp. 339-345 ◽  
Author(s):  
Pavol Božek ◽  
Peter Pokorný

Logistics is primarily to address issues with whose functional, organizational, personnel and material means can be improved and optimize the entire course material flow businesses, which shall logistics integration business functions. Production logistics means a sum of logistical tasks and measures for preparation and execution of the production process. Includes all activities associated with material and information flows of raw materials, auxiliary and production materials from the warehouse to the production of raw materials and semi-finished goods from the warehouse and purchased parts through the various steps of the manufacturing process including all buffer stores, through the installation of the finished goods warehouse.



2013 ◽  
Vol 427-429 ◽  
pp. 1315-1318 ◽  
Author(s):  
Yi Bing Li ◽  
Fei Pan

Nowadays, customers are seeking products of high quality and low cost. The use of neural networks in quality control has been a popular research topic over the last decade. An adaptive self-organizing mapping (SOM) neural network algorithm is proposed to overcome the shortages of traditional neural networks in this paper. In order to improve the classification effectiveness of SOM neural network, this paper designs an improved SOM neural network, which combined the SOM and K-means algorithms. The flow of combination of SOM and K-means algorithms was analyzed in this paper. And the case study of cement slide shoe bearing in manufacturing process was also given to illustrate the feasible and effective.



2018 ◽  
Vol 64 ◽  
Author(s):  
N.V. Bespalova ◽  
M.M. Gomola ◽  
T.I. Yakovleva

The article is devoted to the urgent theoretical and practical problems of the quality control of the chocolate confectionery products in cafes and restaurants. The authors analyze the modern approaches to the quality control of the chocolate confectionery products. The practical recommendations can be useful for the process of selection of the high quality raw materials. The criteria for the quality control of the chocolate confectionery products have been given. Some ways to improve the quality of he chocolate confectionery products have been discussed.



2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Listiani Listiani

This research is aimed to determine the quality control system of production process in PT Industri Sandang Nusantara unit Patal Secang, measure the efectivity of quality control system by using control P-Chart and determine factors that cause defect product. This research is explorative descriptive by case study method. Data used in this research is the procedure of production process and the number of defect product. Product used in this company is  thread R30/1 UW and R 40/1 UW PT Industri Sandang Nusantara Unit Patal Secang in 24 periods of production between April – Mei 2006. Data is collected by interview, documentation, and observation. Data is analyzed by control p-chart and fish bone diagram. The conclusion of this research are: (1) The quality control system which is consists of controlling raw materials, production process and final product is appropriate with the company’s standard; (2) the number of defect product R 30/1 UW is 26.956 bale with the average 0.0167; Control P Chart shows that there are three periods which are out of control. They are in April 30, Mei 5 and 21, 2006. (3) The number of final product R 40/1 UW is 2159 bale with the average 0.0214; control p-chart shows that there are tw periods which are out of control. They are ini Mei 6 and Mei 12, 2006. (4) Factors that cause defect product are obsolete machines, employee performance, control system, and raw materials. Based on that condition, management should impove the controlling of machines, improve motivation and commitment of the employee, improve the method of inspection and control the quality of raw materials.



2020 ◽  
Author(s):  
Aleksander Litovchenko

The book presents the path of production development of honey wine, from the times of Kievan Rus to the present. A deep analysis of culture, honey winemaking, one of the best in its time in world practice, shows what heights were achieved, and how more than a century ago this art was lost. There were many different unsubstantiated sentences, primitive literature, in no way restoring the glory of our great ancestors and not meeting modern requirements for making wines in general. In the last century, as in the entire post-Soviet space, and in Ukraine, the use of honey in winemaking was prohibited and there were ao standard documents on its use for this purpose. The author, with the support of the country's government, while fulfilling the task of the Cabinet of Ministers of Ukraine to improve the quality of fruit and berry wines, produced at that time, it was possible to convince the country's leadership of the need to use honey for the preparation of high-quality honey fruit and berry wines. For this purpose, technical conditions TUU 202.13.022-99 were proposed, developed, and approved "Fruit and berry dessert wines with aromatic additives", where, in addition to the use of fruit and berry, spicy, aromatic, and medicinal raw materials, the use of honey was first laid. For the first time according to TUU, a number of honey wines were developed, approved, and mastered in produccion. At international competicions, such wines have received the highest awards, gold medals, and Grand Prix cups. Subsequently, with the participation of the largest scientific centers, GOST (DSTU 6036: 2008) was prepared. Fruit and berry wines, general technical conditions, in which the production of honey wines arc separated into another group. These regulatory documents fully regulate the production, release, and quality control of honey wines in Ukraine. The author offers a broad overview of the basic terrns and designations necessary for the production of high-quality fruit and berry honey wines. Provides and explains the modem requirements for the classification of honey wines, measures on safety, sanitation, and hygiene are seriously discussed, analyzes the main conditions and factors that detennine the quality of the necessary components, and the preparation of honey wines in general. Since honey wines can only be prepared using fruit and berry wines, including grape juices, the book provides the necessary overview in the processing of fruits, berries, grapes, the reception and quality control of raw materials, and the preparation of juices. Very important and inforrnative material is presented in the chapters on the selection and procurement of honey, for the preparation of honey fruit and berry and honey grape wines. Important sections on the impact of wine on the health and culn,re of wine consumption. The most common diseases and disadvantages of honey wines are described. A very informative and impressive list of honey wines, first developed in Ukraine under the guidance of the author, professor, doctor, technical sciences, Laureate of the State Prize of Ukraine in the field of science and technology Litovchentko A.M., in the amount of 48 items, practically from all raw materials available in Ukraine. To facilitate the work on the preparation of high-quality honey wines, 12 additional applications are presented, providing the main technological process of production. The book is of important practical, theoretical, and scientific interest.



2018 ◽  
Vol 1 (1) ◽  
pp. 85-91
Author(s):  
Anna Fitrzyk ◽  
Katarzyna Niemiec

Abstract Aerosol products are present in different industries including cosmetic, technical, household and many more. These products are subject to number of controls both at the pre-production, in-process and post-production stages. Controls at the pre-production stage relate to checking the conformity of individual components that make up the aerosol packaging, as well as raw materials that are used to create the formula. The checks carried out during the production process are mainly focused on the verification of parameters at particular stages of production. Whereas, post-production checks are related to the evaluation of the finished product. Due to the highest share of metal packaging in the aerosol products market, such products are the subject of this article.



2020 ◽  
Vol 8 ◽  
pp. 428-436
Author(s):  
Isna Zulfa Azmi ◽  
Oktora Yogi Sari

The increasing number of bag factories throughout Indonesia that have well-known brands and every manufacturer is required to provide products of good quality. Poor product quality will cause consumers to move to other similar products. So in the production of bags, the thing that must be considered by the company is the quality of its products. In this study the authors aim to analyze quality control in a production process and identify several factors that cause disability in the product, PT. MAG is a bag company that is demanded to control the quality of the production process. This study uses a six sigma analysis tool consisting of five steps, namely using the DMAIC method (Define, Measure, Analyze, Improve, and Control). Based on the results of the study there are three types of disabilities in the production process, including cutting, zippers and broken bag straps with an average sigma value of 2.48 with a DPMO value of 20256.92. Factors affecting the production process are human, machine, environment, equipment, raw materials, and methods. In this case the company can use the Six Sigma method because it is still in the medium category.



2020 ◽  
Vol 24 (5) ◽  
pp. 1150-1158
Author(s):  
Lyutsiya Karimova ◽  
◽  
Tagir Khazhimukhametov ◽  
Yerlan Kairalapov ◽  
Alexander Yun ◽  
...  

The purpose of the paper is to study the physical and chemical features of high-quality iron concentrate precipitation from nitric acid leaching solutions of low-grade copper-sulfide raw materials, and to obtain a highly profitable product which is suitable for direct processing at ferrous metallurgy enterprises. To conduct the experiments on obtaining impurity rich and depleted iron concentrate a hydrolytic precipitate containing 54.6% iron and numerous impurities obtained as a result of processing of nitric acid leaching solutions of rough copper sulfide concentrate from the Zhezkazgan deposit is used. Analytical studies of initial materials and resulting products of the processes under investigation are conducted using the modern certified methods including the x-ray spectral, x-ray phase, atomic absorption analysis, mass spectrometry method with inductively coupled plasma. We have obtained a high-quality iron concentrate containing minimal amounts of silicon, aluminum, phosphorus and sulfur as well as partial and generalized equations that give an idea of the influence of the studied factors on the indicators of the iron concentrate production process. The apparent activation energy of the process has been calculated - 46.77 kJ/mol. It probably indicates the presence of diffusion complications caused by the formation of solid products passivating the surface of the material being dissolved. The principal possibility of obtaining high-quality iron concentrate from processing poor copper-sulfide concentrate middlings of the Zhezkazgan deposit is shown. The mathematical processing of experimental data has resulted in the determination of equations that characterize the degree of influence of the studied factors on the process indicators. It is found out that the production process of the saleable iron concentrate proceeds in the mode of diffusion restrictions. It is the first time, when multivariate generalized dependencies are obtained for the process under consideration and their analytical transformations are performed. These methods can be used to study the analogous processing of similar metallurgical raw materials.



Sign in / Sign up

Export Citation Format

Share Document