Steel continuous casting is one of fundamentals of modern steel industry. Specialists of Nizhny Tagil steel-works (NTMK) made an important contribution to the process perfection. The one-strand slab CCM of curvilinear type with radial mold and slab straightening by multipoint curve, designed and manufactured at Uralmashzavod, became a prototype for many machines, which were later manufactured at domestic and foreign steel-works in the end of 60th of the previous century. In the process of mastering of CCMs, which were put into operation within the programs of the plant modernization and transferring to BOF production with steel continuous casting, the CCMs were significantly modernized and technology of casting was perfected. To bring down the impact on the solidifying billet peel and decrease a billet swell, the scheme of the supporting rollers location was changed, which enabled to increase the length of the supported zone. A principally new scheme of billets cooling was implemented, which ensured a softer and uniform secondary cooling due to water-air “fog”. To create optimal conditions of axis zone forming during production of round billets of 430 mm diameter, a technology of protective heat screens application was used. The protective screens were installed in the end of ingot solidification zone. A large work was done on determination of optimal technological casting parameters – temperature and speed modes, types of slag forming mixtures, types of heat-insulating mixtures, methods of metal protection in the process of casting. As a result of the work done, at EVRAZ NTMK a complex of steel continuous casting was created, which enables to be flexible depending on the varying situation at the market and to produce continuously casted billets of various dimensions and wide range of steel grades.