Asymptotic Analysis for Transient Scattered Electric Field from a Conducting Cylinder Coated with a Thin Dielectric Layer

2018 ◽  
Author(s):  
K. Goto ◽  
R. Manabe ◽  
Y. Egashira ◽  
R. Takahashi
Keyword(s):  
Electric Field ◽  
Asymptotic Analysis ◽  
Dielectric Layer ◽  
Conducting Cylinder ◽  
Thin Dielectric Layer

scholarly journals Electric-field noise above a thin dielectric layer on metal electrodes

2016 ◽  
Vol 18 (2) ◽  
pp. 023020 ◽  
Author(s):  
Muir Kumph ◽  
Carsten Henkel ◽  
Peter Rabl ◽  
Michael Brownnutt ◽  
Rainer Blatt
Keyword(s):  
Electric Field ◽  
Dielectric Layer ◽  
Metal Electrodes ◽  
Field Noise ◽  
Thin Dielectric Layer

Tuning the Localized Surface Plasmon Resonance of Al-Al2O3 Nanosphere Towards NIR Region by Gold Coating

2020 ◽  
Vol 12 ◽  
Author(s):  
Jyoti Katyal ◽  
Shivani Gautam
Keyword(s):  
Electric Field ◽  
Field Distribution ◽  
Dielectric Layer ◽  
Electric Field Distribution ◽  
Active Material ◽  
Visible Region ◽  
Field Enhancement ◽  
Localized Surface Plasmon ◽  
Sers Substrate ◽  
Al Nanoparticles

Background: A relatively narrow LSPR peak and a strong inter band transition ranging around 800 nm makes Al strongly plasmonic active material. Usually, Al nanoparticles are preferred for UV-plasmonic as the SPR of small size Al nanoparticles locates in deep UV-UV region of the optical spectrum. This paper focused on tuning the LSPR of Al nanostructure towards infrared region by coating Au layer. The proposed structure has Au as outer layer which prevent the further oxidation of Al nanostructure. Methods: The Finite Difference Time Domain (FDTD) and Plasmon Hybridization Theory has been used to evaluated the LSPR and field enhancement of single and dimer Al-Al2O3-Au MDM nanostructure. Results: It is observed that the resonance mode show dependence on the thickness of Al2O3 layer and also on the composition of nanostructure. The Au layered MDM nanostructure shows two peak of equal intensities simultaneously in UV and visible region tuned to NIR region. The extinction spectra and electric field distribution profiles of dimer nanoparticles are compared with monomer to reveal the extent of coupling. The dimer configuration shows higher field enhancement ~107 at 1049 nm. By optimizing the thickness of dielectric layer the MDM nanostructure can be used over UV-visible-NIR region. Conclusion: The LSPR peak shows dependence on the thickness of dielectric layer and also on the composition of nanostructure. It has been observed that optimization of size and thickness of dielectric layer can provide two peaks of equal intensities in UV and Visible region which is advantageous for many applications. The electric field distribution profiles of dimer MDM nanostructure enhanced the field by ~107 in visible and NIR region shows its potential towards SERS substrate. The results of this study will provide valuable information for the optimization of LSPR of Al-Al2O3-Au MDM nanostructure to have high field enhancement.

scholarly journals Charging of Piezoelectric Cellular Polypropylene Film by Means of a Series Dielectric Layer

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 333
Author(s):  
Pedro Llovera-Segovia ◽  
Gustavo Ortega-Braña ◽  
Vicente Fuster-Roig ◽  
Alfredo Quijano-López
Keyword(s):  
Electric Field ◽  
Corona Discharge ◽  
Dielectric Layer ◽  
Dielectric Breakdown ◽  
Piezoelectric Materials ◽  
High Resistivity ◽  
Internal Electric Field ◽  
Dielectric Polarization ◽  
Surface Flashover ◽  
In Series

Piezoelectric polymer cellular films have been developed and improved in the past decades. These piezoelectric materials are based on the polarization of the internal cells by means of induced discharges in the gas inside the cells. Internal discharges are driven by an external applied electric field. With this polarization method, cellular polypropylene (PP) polymers exhibit a high piezoelectric coefficient d33 and have been investigated because of their low dielectric polarization, high resistivity, and flexibility. Charging polymers foams is normally obtained by applying a corona discharge to the surface with a single tip electrode-plane arrangement or a triode electrode, which consists of a tip electrode-plane structure with a controlled potential intermediate mesh. Corona charging allows the surface potential of the sample to rise without breakdown or surface flashover. A charging method has been developed without corona discharge, and this has provided good results. In our work, a method has been developed to polarize polypropylene foams by applying an insulated high-voltage electrode on the surface of the sample. The dielectric layer in series with the sample allows for a high internal electric field to be reached in the sample but avoids dielectric breakdown of the sample. The distribution of the electric field between the sample and the dielectric barrier has been calculated. Experimental results with three different electrodes present good outcome in agreement with the calculations. High d33 constants of about 880 pC/N have been obtained. Mapping of the d33 constant on the surface has also been carried out showing good homogeneity on the area under the electrode.

Three Dimensional Bacteria Concentration by Negative Dielectrophoresis

2013 ◽  
Vol 699 ◽  
pp. 251-256
Author(s):  
T. Hisajima ◽  
L. Mao ◽  
K. Shinzato ◽  
M. Nakano ◽  
J. Suehiro
Keyword(s):  
Escherichia Coli ◽  
Numerical Simulation ◽  
Dielectric Layer ◽  
Parallel Plate ◽  
Three Dimensional ◽  
Three Dimension ◽  
Escherichia Coli Cells ◽  
Opposite Electrode ◽  
Novel Method ◽  
Thin Dielectric Layer

Thispaper reports a novel method to concentrate bacteria in three-dimension by negative dielectrophoretic (n-DEP) force in a microchannel. This was achieved by placing a thin dielectric layer on one of a pair of parallel plate electrodes. The dielectric layer having a home-plate like pentagonal shape, forms a gradient of electric field causing n-DEP. A three-dimensional numerical simulation of bacteria trajectory predicts that bacteria flowing a microchannel were three-dimensionally concentrated beneath the tip of the pentagonal dielectric thin layer. The trajectory and concentration of bacteria under n-DEP force were also experimentally confirmed using Escherichia coli cells. Bacteria moved along edges of the dielectric layer and were pushed to the opposite electrode, resulting in their concentration in three-dimension. The proposed device might be applicable to selective concentration of bacteria depending on their dielectric properties.

STUDY OF PHASED ARRAYS OF SLOTTED WAVEGUIDE ANTENNAS WITH DIELECTRIC FILLING

2021 ◽  
pp. 42-47
Author(s):  
A. O. Pelevin ◽  
A. M. Lerer ◽  
G. F. Zargano
Keyword(s):  
Computer Simulation ◽  
Antenna Arrays ◽  
Dielectric Layer ◽  
Phased Arrays ◽  
Frequency Range ◽  
Phased Antenna Arrays ◽  
Operating Frequency Range ◽  
Slotted Waveguide ◽  
Dielectric Filling ◽  
Thin Dielectric Layer

The article describes the computer simulation of phased antenna arrays consisting of slotted waveguide antennas with air and dielectric filling. It is shown that inser-tion of a thin dielectric layer shifts the operating frequency range of phased anten-na arrays by 1 GHz or more down in frequency while maintaining directional char-acteristics.

Sign in / Sign up

Export Citation Format

Share Document