ELECTROMAGNETIC COMPATIBILITY OF LOW-POWER AUTONOMOUS POWER SUPPLY EQUIPMENT

Author(s):  
V.N. Delyagin ◽  
◽  
V.I. Bocharov ◽  

The article presents the results of research on the evaluation of electromagnetic compatibility of elements of the power supply system for Autonomous low-power consumers. The subject of the study is a quantitative assessment of the level of harmonic components of currents and voltages in systems: a permanent magnet generator-a DC-to-AC Converter-a consumer with a nonlinear load and interfering interaction of jointly working elements of this system. The level of harmonics of voltage and current in the local electrical network (farm), repeatedly (from 3 to 10 times) exceeds the regulatory requirements. The multiplicity of the increase in electrical energy losses (K-Factor) is from 5("pure" sine of the DC-AC Converter) to 20 (rectangular meander). When designing Autonomous systems, it is necessary to provide measures to reduce the loss of electrical energy, exit from standing electrical equipment and false triggering of electronic devices in the consumer of electric energy

2020 ◽  
Vol 209 ◽  
pp. 07012
Author(s):  
Oleg V. Zapanov ◽  
Lidiia I. Kovernikova

Joint Stock Company (JSC) “Mine Aleksandrovsky” is located in the Mogochinsky district of the Trans-Baikal Territory. “Mine Aleksandrovsky” concluded an energy supply agreement with JSC “Chitaenergosbyt” for the purchase of electric energy from it. In accordance with the contract, the electric energy supplier undertakes to supply electric energy that meets the requirements of the current legislation of the Russian Federation. The power quality in the Trans-Baikal Territory in most regions does not meet the requirements of State Standard 32144-2013. Suppliers and the network organization are responsible to consumers for the reliability of its electric energy supply and its quality within the boundaries of their electric networks. Despite the obligations of the contract, the electric energy supplied to “Mine Alexandrovsky” does not meet the requirements. In 2017 the ball mill engine in the shredding department of the gold recovery factory failed as a result of power outages and the supply of low power quality through the 6 kV line. The article provides information on interruptions in power supply over the years of operation of the enterprise, the results of analysis of the power quality, information on damage to electrical equipment caused by low power quality, and economic damage.


Author(s):  
В.Ф. Белей ◽  
Г.А. Решетников ◽  
К.В. Коротких

Одним из направлений научно-технического прогресса на объектах морской индустрии является широкое использование технологий, основанных на нелинейных элементах, что позволяет значительно снизить их массогабаритные показатели и расшить их функциональные возможности. Однако применение таких технологий приводит к ухудшению качества электрической энергии, в первую очередь за счет высших гармонических составляющих напряжения и тока. В статье показана природа высших гармонических, выполнен анализ разделов «Правил классификации и постройки морских судов. 2021», российских и ряда зарубежных стандартов в области качества электроэнергии, регламентирующих уровень высших гармонических составляющих напряжения и тока в электрических сетях и системах. В работе приведены результаты теоретических и экспериментальных исследований влияния высших гармонических составляющих на функционирование судового электрооборудования: асинхронных электродвигателей, силовых кабелей, трансформаторов, конденсаторных батарей и систем освещения. Определены выражения, позволяющие оценить это влияние. Показано, что в основном это влияние проявляется: в дополнительном нагреве электрооборудования за счет поверхностного эффекта; вибрации асинхронных электродвигателей при высоких значениях 5 и 7 гармоник напряжения судовой электрической сети. One of the areas of scientific and technological progress at the facilities of the marine industry is the widespread use of technologies based on nonlinear elements, which can significantly reduce their weight-size parameters and dimensions and expand their functional capabilities. However, the use of such technologies leads to a deterioration in the quality of electrical energy, primarily due to higher harmonic components of voltage and current. The article shows the nature of higher harmonics, analyzes the sections of the «Rules for the Classification and Construction of Sea-Going Vessels. 2021», Russian and a number of foreign standards in the field of electric power quality, regulating the level of higher harmonic components of voltage and current in electrical networks and systems. The paper presents the results of theoretical and experimental studies of the influence of higher harmonic components on the functioning of shipboard electrical equipment: asynchronous electric motors, power cables, transformers, capacitor banks and lighting systems. Formulas have been determined to assess this effect. It is shown that the influence is mainly manifested: in additional heating of electrical equipment due to the skin effect; vibrations of asynchronous electric motors at high values of 5th and 7th voltage harmonics of the ship's electrical network.


Author(s):  
Viktor Kovalenko ◽  
Serhii Levchenko ◽  
Mykola Tryputen ◽  
Vitaliy Kuznetsov ◽  
Maksym Tryputen ◽  
...  

Urgency of the research. It is well-known that electric energy characteristics are the levels of electromagnetic compatibility of electric grid providing adequate performance of any electrical means connected to the grid if the electric energy characteristics do not exceed permitted values. In the context of general idea of electromagnetic compatibility of consumers within power supply grids, power quality is the topical problem of modern electric-power supply industry. Target setting. The issue of assessing the possibility of ensuring the quality of electricity in terms of voltage deviation by consumers is very important. The problem of voltage fluctuations is relevant, so that voltage deviation have a negative impact on functioning electrical equipment Actual scientific researches and issues analysis. Papers [2-11] are devouted the effective management methods of electrical energy consumption. The articles [6-8] shows that under present conditions only system approach ensures accurate identification and prediction of electric power losses in distribution networks that are characterized by considerable ambiguity. Uninvestigated parts of general matters defining. Generalized diagram of the voltage modes characterizes the state for the entire distribution network connected to the main substation; it consists of the branched 10 kV network, all the distribution transformers, and all the 0.4 kV networks connected to those transformers. Along with the generalized diagram, values of the available voltage losses have been obtained; those values occur within 10 kV and 0.4 kV networks in terms of the favourable conditions of voltage control and the initial values of the admissible voltage deviations of electrical receivers. Moreover, that is the basis to determine operating position of control tappings of distribution transformers. The research objective. Since one of the important characteristics of electrical energy is the deviation of the voltage in the network, it is advisable to carry out its analysis in the urban distribution networks in terms of Levanevska substation, town of Zaporizhzhia. To simplify practical representation of possible voltage modes on the main substation buses and within the whole distribution networks, it is expedient to use graphic representation – so-called generalized diagram of voltage modes. That diagram helps make the analysis of voltage modes more demonstrative than analytical calculation; besides, the diagram gives great possibilities for further study. The statement of basic materials. While analyzing voltage mode in the distribution networks and determining the required law of voltage control in the main substation (MS), one should take into consideration great amount of factors effecting and complicating that study. Those factors include the following: changes in the operating mode of the network, differences in the points of connections of electrical receivers (ER) to the distribution network, differences in possible operating positions of the control tappings in the distribution transformers (DT), differences in the points of DT connections to 10 kV network, available dead zones of automatic voltage controller etc. Owing to that fact, it is required to perform generalized analysis of the voltage mode and conditions of its control within 10 kV and 0.4 kV distribution networks and on main substation buses. To do that, one should apply probabilistic calculation methods. At the same time, it is expedient to use graphic depiction (so-called generalized diagram (GD) of the voltage modes) to simplify representation of possible voltage modes on MS buses and within the whole distribution network. That diagram will help make the analysis of the voltage modes more clearly arranged than analytic calculations; moreover, it gives great opportunities for further study. Conclusions. Voltage deviation in the distribution networks has been performed and expediency of the voltage deviation control for electrically closest and farthest consumers have been analyzed in terms of Levanevska substation, town of Zaporizhzhia. Expediency of practical application of generalized diagrams for that purpose has been demonstrated. It has been defined that in the modes of maximum and minimum loads, voltage exceeds the admissible deviation norms of ± 5 %. Conclusion has been made on the expediency of more careful voltage control. Generalized diagram for 0-1 and 9-10 hours with the maximum voltage deviations has been constructed. Graph of dependences has been developed; formula of voltage deviations in the main substation, due to the voltage passing along that line, has been defined. According to the voltage data before and after the implementation of control, graphs of voltage deviations on the distribution transformer and in terms of the farthest consumer have been constructed.


Author(s):  
Yu.A. Papaika ◽  
O.G. Lysenko ◽  
A.V. Bublikov ◽  
I.G. Olishevskiy

Purpose. Analysis of the problem of energy efficiency and electromagnetic compatibility of powerful energy associations with nonlinear loads and renewable energy sources. Finding promising ways to increase energy efficiency of power supply systems. Methodology. Mathematical modeling of electromagnetic compatibility. Findings. The analysis of the problem of energy efficiency and electromagnetic compatibility of powerful energy associations with nonlinear loads and renewable energy sources allows us to formulate the following provisions that determine the objectives of this study. A promising way to increase the energy efficiency of power supply systems is the introduction of refined methods of analysis and forecasting of electrical modes of industrial enterprises, as well as indicators of voltage quality and reliability of electrical equipment. Originality.  Although the problem of electromagnetic compatibility has been the subject of numerous domestic and foreign studies, it should be noted that most of these works consider the processes of generating electromagnetic interference in the electrical network without reference to the technological schedules of electrical equipment. Practical value.  One of the electromagnetic effects, which is manifested in the operation of frequency converters, are significant levels of interharmonics and higher harmonics, which are generated in the electrical network and contribute to the growth of electricity losses and reduce the service life of electrical equipment. However, the regularities connecting the parameters of the power system and the modes of powerful industrial converters have not been studied, and the substantiation of the parameters of a rational energy efficient mode of the power supply system, taking into account individual graphs of higher harmonics, has not been carried out until today.


Author(s):  
E. I. Gracheva ◽  
A. N. Gorlov ◽  
Z. M. Shakurova

The article examines the main features of the layout of electrical equipment for shop networks of internal power supply with the definition of indicators for a group of shop customers connected to a single power center, affecting the choice of the structure of schemes for shop network sites. The parameters characterizing the circuit topology are revealed. A study is presented of the influence of the load factor of workshop transformers on their reactive power factor, it is proved by calculation by technical and economic criteria the feasibility of replacing a workshop transformer with two with a lower total power. The calculation of energy savings in the in-plant power supply systems. The type of dependences tgφ of transformers ТМ and ТСЗ with various rated powers in the function of loading transformers is established. The most significant factors of the growth of idle power losses during operation are presented. With determination of losses of active and reactive power and electricity in transformers and losses of active power in a high voltage distribution network A feasibility study was carried out on the options for internal power supply schemes with two transformers of lower power installed instead of one, and the feasibility of such a replacement to increase the efficiency of the equipment was proved and the estimated payback period for the investment capital was determined. A comparative analysis of the studied power supply schemes of industrial enterprises with the identification of their advantages and disadvantages.


Author(s):  
Dhiman Chowdhury ◽  
Mohammad Sharif Miah ◽  
Md. Feroz Hossain ◽  
Uzzal Sarker

Emergency back-up power supply units are necessary in case of grid power shortage, considerably poor regulation and costly establishment of a power system facility. In this regard, power electronic converters based systems emerge as consistent, = properly controlled and inexpensive electrical energy providers. This paper presents an implemented design of a grid-tied emergency back-up power supply for medium and low power applications. There are a rectifier-link boost derived DC-DC battery charging circuit and a 4-switch push-pull power inverter (DC-AC) circuit, which are controlled by pulse width modulation (PWM) signals. A changeover relay based transfer switch controls the power flow towards the utility loads. During off-grid situations, loads are fed power by the proposed system and during on-grid situations, battery is charged by an AC-link rectifier-fed boost converter. Charging phenomenon of the battery is controlled by a relay switched protection circuit. Laboratory experiments are carried out extensively for different loads. Power quality assessments along with back-up durations are recorded and analyzed. In addition, a cost allocation affirms the economic feasibility of the proposed framework in case of reasonable consumer applications. The test-bed results corroborate the reliability of the research work.


Author(s):  
N. I. Smolentsev ◽  
L. M. Chetoshnikova

The purpose of the work is to reduce losses and increase energy saving in electric networks. To achieve this goal, a multilevel topology of the electrical network and an asynchronous method for transferring electrical energy between nodes including a load, energy sources, energy storage devices connected in an appropriate manner are proposed. It is shown by the mathematical method that this network topology allows using energy storage devices controlled appropriately and using tele-information technologies to optimize the balance of electric energy in the network, achieving equality of the generated and consumed electricity. Such a network topology and a method of transmitting electrical energy can be the basis of digital technologies in the energy sector (ENERNET).


2021 ◽  
Vol 7 (2) ◽  
pp. 97-102
Author(s):  
Yurii Shelekh ◽  
◽  
Myroslav Sabat ◽  
Vladyslav Lysiak ◽  
Lidija Parashchuk ◽  
...  

The study presents an electric network that allows both increasing the level of electrical safety and eliminating one-phase damage to the electrical network without switching off the consumer's electric energy. The application of the network does not require significant investments. The technical feasibility of implementing an electrical installation with voltage values in the emergency mode on the leading parts, which does not exceed the permissible values for normal mode, is demonstrated. An additional advantage of the proposed technical solution is the immutability of the voltage at the customer's outputs, which allows it to operate normally also in the emergency mode of the electrical installation.


2018 ◽  
Vol 7 (2.23) ◽  
pp. 184 ◽  
Author(s):  
Sergey I. Malafeev ◽  
Sergey S. Malafeev

An energy-efficient and simple method of testing electric motors in a dynamic mode is considered. When testing an electrical machine, the rotor is driven into a reciprocating rotary motion. The source of power of the power converter, which controls the electric machine, is a supercapacitor. When the electric machine is accelerated, electric energy is consumed from the supercapacitor, when the machine brakes the kinetic energy of the moving masses is converted into electrical energy, which accumulates in the supercapacitor. The energy loss during the operation of the electromechanical system in the dynamic mode is compensated by recharging the supercapacitor using a controlled rectifier connected to the power supply network.


Author(s):  
Yu.A. Papaika ◽  
O.G. Lysenko ◽  
A.V. Bublikov ◽  
I.G. Olishevskiy

Purpose. To substantiate the expediency of applying distribution laws to model the reliability of power supply systems with powerful nonlinear loads. Methodology. Application of exponential and normal distribution laws, and Weibull's law. Findings. In a comprehensive assessment of the problem of electromagnetic compatibility and the development of multicriteria parameters of energy efficiency of power supply systems of industrial enterprises, it is most appropriate to use the reliability of the elements that are mathematically described by the Weibull distribution. At the same time, the results of modeling of typical electrical modes and variations of substitution schemes of enterprises showed the sensitivity of reliability indicators to changes in power system capacity. Originality.  New theoretical foundations for research in modern power supply systems with increasing nonlinear load capacity have developed the scientific basis for analysis and synthesis of energy processes in multiphase electrical systems and propose methods of correction taking into account the complex action of sources of electromagnetic interference. And also to offer methods of estimation of their influence on reliability and efficiency of work of the basic electrotechnological equipment. Practical value.  The possibility of applying the obtained results to assess the reliability of power supply systems with powerful nonlinear loads is substantiated. The necessary accuracy and reliability of the decision at the levels of random events, quantities and processes is provided. The mathematical apparatus for the analysis of the main indicators of reliability in the presence of non-sinusoidal voltage is given. Conclusions are made on the adequacy of the calculation results at different stages of electricity distribution. It is shown that the simultaneous optimization of reliability and voltage quality are components of a complex scientific problem of ensuring energy efficiency of electrical networks in the implementation of decentralized models of the energy system.


Sign in / Sign up

Export Citation Format

Share Document