scholarly journals Perancangan dan Perhitungan Sudu Turbin Angin Horisontal NACA 4412 Variasi Sudut Serang Menggunakan Simulasi BEM

2020 ◽  
Vol 8 (2) ◽  
pp. 34-37
Author(s):  
Gian Roni Ignatius ◽  
Agus Sugiri ◽  
Ahmad Suudi
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Fossil Fuels ◽  
Mechanical Energy ◽  
Angle Of Attack ◽  
Electrical Energy ◽  
Shaft Speed ◽  
A Value ◽  
Mechanical Rotation ◽  
Main Material

The need for electricity in Indonesia becoming increasingly part of people's needs. Fossil fuels suchas oil and coal used as the main material for producing electrical energy the more limitedavailability, especially in its use of fossil fuels that pollute the environment. Wind energy is arenewable energy source that could potentially be developed. Wind energy is clean and does notpollute the environment in utilization into mechanical or electrical energy. The conversion of windenergy into electrical energy by converting this energy into mechanical rotation. In the wind energyutilization process made a tool to convert wind energy into electrical energy, that is windturbines.Wind turbine or windmill is a tool for converting wind energy. Wind turbines transformkinetic energy into mechanical energy in the form of a round shaft. Shaft speed is then used to rotatethe dynamo or a generator which produces electricity. The research was carried out on a horizontalaxis wind turbine NACA 4412, diameter 1 m, the number of blades 3 pieces and variations in windspeed 2-8 m / s. Results showed the greatest lift (CL) at 14o angle of attack with a value of 1.583.The driving force of the smallest (CD) at an angle of attack -4o to 2o with a value of 0.008. Value CL/ CD was found in the angle of attack of 6o with a value of 93.057. The maximum power generatedby 484.63 Watt. Wind speed, the number of blades, angle of attack and the election of the airfoileffect on the generated power.Keywords : wind energy, wind turbines, airfoil NACA 4412.

Weibull distribution for determination of wind analysis and energy production

2015 ◽  
Vol 12 (3) ◽  
pp. 215-220 ◽  
Author(s):  
Faruk Oral ◽  
İsmail Ekmekçi ◽  
Nevzat Onat
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Wind Turbines ◽  
Energy Production ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Energy Sources ◽  
Energy Potential ◽  
Electrical Energy Production

In recent years, decreasing reserves and environmental problems related with fossil fuels have increased the demand for clean and renewable energy sources, as with all over the world and also in Turkey. Wind energy is the one of the most rapidly growing among the renewable energy sources in terms of technological and utilization. Turkey is one of the rich countries in Europe in respect to wind energy potential. Productive and effective use of this potential is very important for Turkey that is depended on foreign countries especially in respect to fossil energy sources. Wind speed values are the most important data in calculation of electrical energy from wind turbines. In this study, latest developments and energy-power equations related to wind turbines are investigated. Using of the data obtained from the wind measurement station installed in Sakarya-Esentepe region, annual electrical energy production of an example wind plant is predicted.

Techno-Economic Assessment of Utilizing Wind Energy for Hydrogen Production Through Electrolysis

2017 ◽  
Author(s):  
Reza Ziazi ◽  
Kasra Mohammadi ◽  
Navid Goudarzi
Keyword(s):  
Hydrogen Production ◽  
Wind Energy ◽  
Wind Turbines ◽  
Alternative Energy ◽  
Large Scale ◽  
Fossil Fuels ◽  
Combustion Engine ◽  
Economic Assessment ◽  
Large Cities ◽  
North East

Hydrogen as a clean alternative energy carrier for the future is required to be produced through environmentally friendly approaches. Use of renewables such as wind energy for hydrogen production is an appealing way to securely sustain the worldwide trade energy systems. In this approach, wind turbines provide the electricity required for the electrolysis process to split the water into hydrogen and oxygen. The generated hydrogen can then be stored and utilized later for electricity generation via either a fuel cell or an internal combustion engine that turn a generator. In this study, techno-economic evaluation of hydrogen production by electrolysis using wind power investigated in a windy location, named Binaloud, located in north-east of Iran. Development of different large scale wind turbines with different rated capacity is evaluated in all selected locations. Moreover, different capacities of electrolytic for large scale hydrogen production is evaluated. Hydrogen production through wind energy can reduce the usage of unsustainable, financially unstable, and polluting fossil fuels that are becoming a major issue in large cities of Iran.

Research on Wind Turbine Blade Loads and Dynamics Factors

2014 ◽  
Vol 1014 ◽  
pp. 124-127
Author(s):  
Zhi Qiang Xu ◽  
Jian Huang
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Wind Turbines ◽  
Mechanical Energy ◽  
Turbine Blades ◽  
Electrical Energy ◽  
Wind Turbine Blade ◽  
Strength Analysis ◽  
Wind Turbine Blades ◽  
Turbine Wheel

Wind turbines consists of three key parts, namely, wind wheels (including blades, hub, etc.), cabin (including gearboxes, motors, controls, etc.) and the tower and Foundation. Wind turbine wheel is the most important part ,which is made up of blades and hubs. Blade has a good aerodynamic shape, which will produce aerodynamic in the airflow rotation, converting wind energy into mechanical energy, and then, driving the generator into electrical energy by gearbox pace. Wind turbine operates in the natural environment, their load wind turbine blades are more complex. Therefore load calculations and strength analysis for wind turbine design is very important. Wind turbine blades are core components of wind turbines, so understanding of their loads and dynamics by which the load on the wind turbine blade design is of great significance.

Effect of Slotted Angle on Savonius Wind Turbine Performance

2021 ◽  
Vol 104 ◽  
pp. 83-88
Author(s):  
Rahmat Wahyudi ◽  
Diniar Mungil Kurniawati ◽  
Alfian Djafar
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Electrical Energy ◽  
Speed Ratio ◽  
Angle Variation ◽  
Wind Speeds ◽  
Turbine Performance ◽  
Savonius Wind Turbine ◽  
Low Wind Speeds

The potential of wind energy is very abundant but its utilization is still low. The effort to utilize wind energy is to utilize wind energy into electrical energy using wind turbines. Savonius wind turbines have a very simple shape and construction, are inexpensive, and can be used at low wind speeds. This research aims to determine the effect of the slot angle on the slotted blades configuration on the performance produced by Savonius wind turbines. Slot angle variations used are 5o ,10o , and 15o with slotted blades 30% at wind speeds of 2,23 m/s to 4,7 m/s using wind tunnel. The result showed that a small slot angle variation of 5o produced better wind turbine performance compared to a standard blade at low wind speeds and a low tip speed ratio.

Improved design of Savonius rotor for green energy production from moving Singapore metropolitan rapid transit train inside tunnel

2018 ◽  
Vol 233 (7) ◽  
pp. 2426-2441 ◽  
Author(s):  
Praveen Laws ◽  
Rajagopal V Bethi ◽  
Pankaj Kumar ◽  
Santanu Mitra
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Degrees Of Freedom ◽  
Fossil Fuels ◽  
Numerical Study ◽  
Electrical Energy ◽  
Daily Basis ◽  
Green Energy ◽  
Subway Tunnel ◽  
Savonius Wind Turbine

Nonrenewable fossil fuels are finite resources that will ultimately deplete in near future. Nature sheds colossal amount of renewable wind energy but humans harvest a morsel. Taking this into account a numerical study is proposed on wind energy harvesting from a speeding subway train. Subways trains generate a remarkable gust of wind that can be transferred to useful electrical energy on daily basis. To this aim, a numerical analysis is modeled by placing Savonius wind turbine in a subway tunnel to crop the wind energy produced from the speeding train. The passage of train in the tunnel generates very high velocity slipstreams along the length of the tunnel. The slipstream phenomena develop a boundary layer regime that will be absorbed by the Savonius wind turbine to self-start and generate power. In the present study, a two-dimensional numerical simulation with modified turbine blade design is carried out using open source tool OpenFOAM® with PimpleDyMFoam solver coupled with six degrees of freedom mesh motion solver sixDoFRigidBodyMotion and k–ɛ turbulence modeling, to measure the amount of torque predicted by the rotor from the gust of wind produced by the speeding train in the tunnel. Being a self-start turbine with no yaw mechanism required the turbine collects air from any direction and converts it into useful power.

scholarly journals An experimental investigation into a novel small-scale device for energy harvesting using vortex-induced vibration

2020 ◽  
Author(s):  
Farshad Moradi Gharghani ◽  
Mohamad Ali Bijarchi ◽  
Omid Mohammadi ◽  
Mohammad Behshad Shafii
Keyword(s):  
Wind Energy ◽  
Large Scale ◽  
Fossil Fuels ◽  
Energy Harvester ◽  
Electrical Energy ◽  
Small Scale ◽  
Comprehensive Investigation ◽  
Vortex Induced Vibration ◽  
Geometrical Shapes ◽  
Oscillating Plate

Abstract Renewable energies could be a good solution to the problems associated with fossil fuels. The storage of wind energy by means of small-scale devices rather than large-scale turbines is a topic that has gained lots of interest. In this study, a compact device is proposed to harvest wind energy and transform it into electrical energy, by means of oscillations of a magnet into a coil, using the concept of vortex-induced vibration (VIV) behind a barrier. For a more comprehensive investigation, this system is studied from two viewpoints of fluid mechanics (without magnet) and power generation (with the magnet). For this purpose, an oscillating plate hinging on one side and three barriers with different geometrical shapes including cylindrical, triangular and rectangular barriers are used. In addition to the effect of barrier geometry, the impacts of various barriers dimensions, the distance between the plate and the barriers as well as inclination angle of the plate with respect to the horizon on the amplitude of oscillations and generated power are investigated. Results showed that in each case, there is a unique Reynolds number in which the frequency of vortex shedding equals to the frequency of plate oscillation and the output power from the energy harvester device is maximum. Besides, by increasing the barrier dimensions, the amplitude of oscillations increases up to three times, which leads to a higher generated power. Finally, by considering the studied parameters, the best conditions for generating energy using the VIV method are presented for design purposes. Among all the considered cases, the cylindrical barrier with the highest diameter and nearest distance to the plate led to the highest efficiency (0.21%) in comparison with other barriers.

Piezoelectric wind energy harvester for low-power sensors

2011 ◽  
Vol 22 (18) ◽  
pp. 2215-2228 ◽  
Author(s):  
Jayant Sirohi ◽  
Rohan Mahadik
Keyword(s):  
Energy Harvesting ◽  
Wind Energy ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Load Resistance ◽  
Operating Conditions ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Wireless Sensor Nodes ◽  
Piezoelectric Energy

There has been increasing interest in wireless sensor networks for a variety of outdoor applications including structural health monitoring and environmental monitoring. Replacement of batteries that power the nodes in these networks is maintenance intensive. A wind energy–harvesting device is proposed as an alternate power source for these wireless sensor nodes. The device is based on the galloping of a bar with triangular cross section attached to a cantilever beam. Piezoelectric sheets bonded to the beam convert the mechanical energy into electrical energy. A prototype device of size approximately 160 × 250 mm was fabricated and tested over a range of operating conditions in a wind tunnel, and the power dissipated across a load resistance was measured. A maximum power output of 53 mW was measured at a wind velocity of 11.6 mph. An analytical model incorporating the coupled electromechanical behavior of the piezoelectric sheets and quasi-steady aerodynamics was developed. The model showed good correlation with measurements, and it was concluded that a refined aerodynamic model may need to include apparent mass effects for more accurate predictions. The galloping piezoelectric energy-harvesting device has been shown to be a viable option for powering wireless sensor nodes in outdoor applications.

scholarly journals Aerodynamic Simulations for Floating Darrieus-Type Wind Turbines with Three-Stage Rotors

Inventions ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 18
Author(s):  
Mohamed Amine Dabachi ◽  
Abdellatif Rahmouni ◽  
Eugen Rusu ◽  
Otmane Bouksour
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Cost Effective ◽  
Vertical Axis ◽  
Offshore Wind ◽  
Critical Parameters ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbines

Growing energy demand is causing a significant decrease in the world’s hydrocarbon stock in addition to the pollution of our ecosystem. Based on this observation, the search for alternative sorts of energy to fossil fuels is being increasingly explored and exploited. Wind energy is experiencing a very important development, and it offers a very profitable opportunity for exploitation since the wind is always available and inexhaustible. Several technical solutions exist to exploit wind energy, such as floating vertical axis wind turbines (F-VAWTs), which provide an attractive and cost-effective solution for exploiting higher resources of offshore wind in deep water areas. Recently, the use of the Darrieus vertical axis wind turbine (VAWT) offshore has attracted increased interest because it offers significant advantages over horizontal axis wind turbines (HAWTs). In this context, this article presents a new concept of floating Darrieus-type straight-bladed turbine with three-stage rotors. A double-multiple stream tube (DMST) model is used for aerodynamic simulations to examine several critical parameters, including, solidity turbine, number of blades, rotor radius, aspect ratio, wind velocity, and rotor height. This study also allows to identify a low solidity turbine (σ = 0.3), offering the best aerodynamic performance, while a two-bladed design is recommended. Moreover, the results also indicate the interest of a variable radius rotor, as well as the variation of the height as a function of the wind speed on the aerodynamic efficiency.

scholarly journals Comparison and Optimization of Neural Networks and Network Ensembles for Gap Filling of Wind Energy Data

2014 ◽  
Vol 2014 ◽  
pp. 1-15
Author(s):  
Andres Schmidt ◽  
Maya Suchaneck
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Extreme Values ◽  
Wind Farms ◽  
Electrical Energy ◽  
Energy Output ◽  
Rbf Networks ◽  
Topographic Complexity ◽  
Technical Issues ◽  
Multilayer Perceptron Networks

Wind turbines play an important role in providing electrical energy for an ever-growing demand. Due to climate change driven by anthropogenic emissions of greenhouse gases, the exploration and use of sustainable energy sources is essential with wind energy covering a significant portion. Data of existing wind turbines is needed to reduce the uncertainty of model predictions of future energy yields for planned wind farms. Due to maintenance routines and technical issues, data gaps of reference wind parks are unavoidable. Here, we present real-world case studies using multilayer perceptron networks and radial basis function networks to reproduce electrical energy outputs of wind turbines at 3 different locations in Germany covering a range of landscapes with varying topographic complexity. The results show that the energy output values of the turbines could be modeled with high correlations ranging from 0.90 to 0.99. In complex terrain, the RBF networks outperformed the MLP networks. In addition, rare extreme values were better captured by the RBF networks in most cases. By using wind meteorological variables and operating data recorded by the wind turbines in addition to the daily energy output values, the error could be further reduced to more than 20%.

scholarly journals THE IMPLEMENTATION OF TURBINE VENTILATOR AS AN ALTERNATIVE POWER PLANT

2020 ◽  
Vol 2 (1) ◽  
pp. 180-185
Author(s):  
Aris Suryadi
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Alternative Energy ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Clean Energy ◽  
Energy Reserves ◽  
Wind Speeds ◽  
Motion Energy ◽  
Alternative Power

Indonesia is actively developing the potential for renewable energy as a substitute for depleting fossil energy reserves. Wind energy is clean energy without polling the environment. Wind energy in Indonesia has great potential, but it is still not optimal enough for its utilization. One form of alternative energy that can be utilized as mechanical energy by wind turbines to convert into electrical energy by dc generators. Ventilators that operate for 24 hours function to suck water and, located on the roof of a warehouse, sports hall . Utilization of wind to become electrical energy is designed from the use of a turbine ventilator as a medium to convert wind into motion energy, where the movement of the turbine is continued by pulley and v-belt comparisons to the generator, this generator produces electricity. This research examines how much electrical energy is produced at different wind speeds ranging from 3 to 5.4 m/s. From the tests conducted, the generator rotation, and the lowest voltage is at wind speed of 3 m/s which is 3.6 V. while the generator speed and the highest voltage is obtained if the wind speed is 5.4 m/s which is 10.3 V.

Sign in / Sign up

Export Citation Format

Share Document