scholarly journals FEATURES OF PREOPERATIVE MANAGEMENT AND METHODS OF EXAMINATION OF PATIENTS OF GROUPS UNDER RESEARCH

2021 ◽  
Vol 20 (3) ◽  
Author(s):  
A.V. Bambuliak ◽  
N.B. Kuzniak ◽  
R.R. Dmytrenko ◽  
L.Ya. Lopushniak ◽  
O.M. Boichuk
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Maxillofacial Surgery ◽  
Mandibular Fractures ◽  
Bone Augmentation ◽  
Attenuation Coefficients ◽  
Tissue Equivalents ◽  
Sinus Lifting ◽  
Examination Methods ◽  
Preoperative Examination

Despite the active ability to repair, it is frequently noticed that the independent potentialof bone tissue is insufficient, that is a serious problem in reconstructive maxillofacialsurgery, orthopedics and traumatology. In recent years, there has been an activesearch for implant material that would match the autologous bone in its properties andcharacteristics. Tissue engineering technologies allow to create tissue equivalents tobone tissue using autogenous stromal cells deposited on biocompatible or biologicalmaterial of tissue engineering design. The article presents the features of preoperativemanagement, description of the used examination methods and bone augmentationmaterials in patients of the groups under study.Objective – to use a set of adequate methods of examination and optimal preoperativemanagement of patients of the group under study during sinus lifting, post-extractionsocket preservation, osteosynthesis for mandibular fractures and impacted wisdom teethextraction, which were accompanied by the use of bone augmentation materials based onmultipotent mesenchymal stromal cells.Material and methods. 280 people aged 18 to 55 with partial or complete adentiaand atrophy of the alveolar process of the jaws, with chronic periodontium infectionand chronic generalized periodontitis, with fractures and impacted third molars wereexamined in the Department of Surgical Dentistry and Maxillofacial Surgery of theChernivtsi Regional Clinical Hospital. All patients were planned to make orthopedicstructures based on dental implants.Results. The use of computed tomography in preoperative examination of patients in thestudied group allows not only visually to examine the object, but also to perform directdensitometric analysis with measurement of attenuation coefficients in Hounsfield units,that is a significant advantage over X-ray examination.Conclusions. The use of bone augmentation materials based on multipotent mesenchymalstromal cells of adipose tissue during dental operations improves the regenerativeproperties of bone tissue and helps to reduce the duration of inpatient treatment.

scholarly journals Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery

2021 ◽  
Vol 8 (8) ◽  
pp. 107
Author(s):  
Lilis Iskandar ◽  
Lucy DiSilvio ◽  
Jonathan Acheson ◽  
Sanjukta Deb
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Vinyl Alcohol ◽  
Maxillofacial Surgery ◽  
Bone Defects ◽  
Bone Tissue Regeneration ◽  
Poly Vinyl Alcohol ◽  
Oral And Maxillofacial Surgery

Despite considerable advances in biomaterials-based bone tissue engineering technologies, autografts remain the gold standard for rehabilitating critical-sized bone defects in the oral and maxillofacial (OMF) region. A majority of advanced synthetic bone substitutes (SBS’s) have not transcended the pre-clinical stage due to inferior clinical performance and translational barriers, which include low scalability, high cost, regulatory restrictions, limited advanced facilities and human resources. The aim of this study is to develop clinically viable alternatives to address the challenges of bone tissue regeneration in the OMF region by developing ‘dual network composites’ (DNC’s) of calcium metaphosphate (CMP)—poly(vinyl alcohol) (PVA)/alginate with osteogenic ions: calcium, zinc and strontium. To fabricate DNC’s, single network composites of PVA/CMP with 10% (w/v) gelatine particles as porogen were developed using two freeze–thawing cycles and subsequently interpenetrated by guluronate-dominant sodium alginate and chelated with calcium, zinc or strontium ions. Physicochemical, compressive, water uptake, thermal, morphological and in vitro biological properties of DNC’s were characterised. The results demonstrated elastic 3D porous scaffolds resembling a ‘spongy bone’ with fluid absorbing capacity, easily sculptable to fit anatomically complex bone defects, biocompatible and osteoconductive in vitro, thus yielding potentially clinically viable for SBS alternatives in OMF surgery.

scholarly journals METHODS OF TISSUE ENGINEERING OF BONE TISSUE IN MAXILLOFACIAL SURGERY

2013 ◽  
Vol 68 (5) ◽  
pp. 10-15 ◽  
Author(s):  
A.V. Lyundup ◽  
◽  
Yu.A. Medvedev ◽  
K.V. Balasanova ◽  
N.M. Zolotopup ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Maxillofacial Surgery

scholarly journals Biomimetic coatings for bone tissue engineering of critical-sized defects

2010 ◽  
Vol 7 (suppl_5) ◽  
Author(s):  
Yuelian Liu ◽  
Gang Wu ◽  
Klaas de Groot
Keyword(s):  
Tissue Engineering ◽  
Bone Formation ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Maxillofacial Surgery ◽  
Bone Morphogenetic Protein 2 ◽  
Native Bone ◽  
Biomimetic Coating

The repair of critical-sized bone defects is still challenging in the fields of implantology, maxillofacial surgery and orthopaedics. Current therapies such as autografts and allografts are associated with various limitations. Cytokine-based bone tissue engineering has been attracting increasing attention. Bone-inducing agents have been locally injected to stimulate the native bone-formation activity, but without much success. The reason is that these drugs must be delivered slowly and at a low concentration to be effective. This then mimics the natural method of cytokine release. For this purpose, a suitable vehicle was developed, the so-called biomimetic coating, which can be deposited on metal implants as well as on biomaterials. Materials that are currently used to fill bony defects cannot by themselves trigger bone formation. Therefore, biological functionalization of such materials by the biomimetic method resulted in a novel biomimetic coating onto different biomaterials. Bone morphogenetic protein 2 (BMP-2)-incorporated biomimetic coating can be a solution for a large bone defect repair in the fields of dental implantology, maxillofacial surgery and orthopaedics. Here, we review the performance of the biomimetic coating both in vitro and in vivo .

Cell Culture–Based Tissue Engineering as an Alternative to Bone Grafts in Implant Dentistry: A Literature Review

2012 ◽  
Vol 38 (S1) ◽  
pp. 538-545 ◽  
Author(s):  
Daniel Gonçalves Boeckel ◽  
Rosemary Sadami Arai Shinkai ◽  
Márcio Lima Grossi ◽  
Eduardo Rolim Teixeira
Keyword(s):  
Tissue Engineering ◽  
Cell Culture ◽  
Literature Review ◽  
Bone Tissue ◽  
Ex Vivo ◽  
Maxillofacial Surgery ◽  
Cell Culture Techniques ◽  
Culture Techniques ◽  
Implant Dentistry ◽  
A New Technique

Several biomaterials and techniques for bone grafting have been described in the literature for atresic bone tissue replacement caused by edentulism, surgical resectioning, and traumas. A new technique involves tissue engineering, a promising option to replace bone tissue and solve problems associated with morbidity of autogenous grafting. This literature review aims to describe tissue-engineering techniques using ex vivo cell culture as an alternative to repair bone maxillary atresias and discuss the concepts and potentials of bone regeneration through cell culture techniques as an option for restorative maxillofacial surgery.

scholarly journals CURRENT APPROACHES OF BONE TISSUE ENGINEERING

2018 ◽  
Vol 22 (2) ◽  
pp. 111-116
Author(s):  
I. A Stamboliev ◽  
Julia Vladimirovna Gazhva ◽  
S. G Ivashkevich ◽  
V. M Ryabova
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Repair ◽  
Maxillofacial Surgery ◽  
Bone Defects ◽  
Oral And Maxillofacial Surgery ◽  
Biomaterial Scaffolds ◽  
Critical Bone Defects

This article discusses the modern approaches of bone tissue engineering in oral and maxillofacial surgery for repair of bone integrity. Describes the new biomaterials in bone tissue engineering, complex scaffolds containing MSC for bone repair of large and critical bone defects, the criteria for selecting biomaterial scaffolds, as well as their positive and negative properties.

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

PLGA+HA/βTCP scaffold incorporating simvastatin: a promising biomaterial for bone tissue engineering

2020 ◽  
Author(s):  
Mariane Beatriz Sordi ◽  
Ariadne Cristiane Cabral da Cruz ◽  
Águedo Aragones ◽  
Mabel Mariela Rodríguez Cordeiro ◽  
Ricardo de Souza Magini
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Thermal Analyses ◽  
Chemical Properties ◽  
Biological Properties ◽  
Scanning Calorimetry ◽  
Evaporation Technique ◽  
Porosity Analysis ◽  
Biphasic Ceramic

The aim of this study was to synthesize, characterize, and evaluate degradation and biocompatibility of poly(lactic-co-glycolic acid) + hydroxyapatite / β-tricalcium phosphate (PLGA+HA/βTCP) scaffolds incorporating simvastatin (SIM) to verify if this biomaterial might be promising for bone tissue engineering. Samples were obtained by the solvent evaporation technique. Biphasic ceramic particles (70% HA, 30% βTCP) were added to PLGA in a ratio of 1:1. Samples with SIM received 1% (m:m) of this medication. Scaffolds were synthesized in a cylindric-shape and sterilized by ethylene oxide. For degradation analysis, samples were immersed in PBS at 37 °C under constant stirring for 7, 14, 21, and 28 days. Non-degraded samples were taken as reference. Mass variation, scanning electron microscopy, porosity analysis, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetry were performed to evaluate physico-chemical properties. Wettability and cytotoxicity tests were conducted to evaluate the biocompatibility. Microscopic images revealed the presence of macro, meso, and micropores in the polymer structure with HA/βTCP particles homogeneously dispersed. Chemical and thermal analyses presented very similar results for both PLGA+HA/βTCP and PLGA+HA/βTCP+SIM. The incorporation of simvastatin improved the hydrophilicity of scaffolds. Additionally, PLGA+HA/βTCP and PLGA+HA/βTCP+SIM scaffolds were biocompatible for osteoblasts and mesenchymal stem cells. In summary, PLGA+HA/βTCP scaffolds incorporating simvastatin presented adequate structural, chemical, thermal, and biological properties for bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document