scholarly journals Economic impact of non dispatchable generation on the cost of energy supply and on the adjustment services

2012 ◽  
pp. 1041-1045
Author(s):  
Ingrid Oliveros Pantoja ◽  
Máximo López Toledo
Keyword(s):  
Economic Impact ◽  
Energy Supply ◽  
Cost Of Energy ◽  
The Cost

scholarly journals Sustainable Retirement Living: What Matters?

2013 ◽  
Vol 1 (1) ◽  
pp. 56 ◽  
Author(s):  
Jake Barker ◽  
Bo Xia ◽  
George Zillante
Keyword(s):  
Sustainable Development ◽  
Questionnaire Survey ◽  
Energy Efficient ◽  
Energy Supply ◽  
Household Waste ◽  
Public Acceptance ◽  
Ageing Population ◽  
Cost Of Energy ◽  
The Cost ◽  
Survey Approach

There is a growing demand for sustainable retirement villages in Australia due to an increasing number of ageing population and public acceptance of sustainable development. This research aims to gain a better understanding of retirees’ understanding about sustainable retirement living and their attitudes towards sustainable developments via a questionnaire survey approach. The results showed that the current residents of retirement villages are generally very conscious of unsustainable resource consumption and would like their residences and community to be more environmentally friendly and energy efficient. The cost of energy supply is a concern to majority of respondents. However there is a certain level of concerns from residents too on the extra cost of going green in their residence. Education is required to residents about recycling household waste and how to use available facilities. A better understanding of retirees’ awareness and attitudes towards sustainability issues helps to improve the sustainable developments of retirement villages in the future.

scholarly journals Energy Squad

2008 ◽  
Vol 130 (05) ◽  
pp. 36-38 ◽  
Author(s):  
Jeffrey Winters
Keyword(s):  
United States ◽  
Power Consumption ◽  
Energy Supply ◽  
High Standard ◽  
The United States ◽  
Energy Costs ◽  
The Past ◽  
Cost Of Energy ◽  
The Cost ◽  
Small Manufacturers

This article focuses on the fact that even as energy and commodity cost increases, working efficiently has been made a bigger priority than ever for small manufacturers, wherein the power consumption is being scaled back. The share of the United States’ energy supply going to industry has dropped steadily over the past few decades. Returns on energy-saving investments are pretty good, but proposals for making those sorts of investments are often held to an incredibly high standard. The recommendations that are most often adopted, such as reducing the temperature of water used in a process or repairing leaks in lines and valves, pay back the initial investment in a couple of months. While energy costs can be cut significantly—even easily—it is an expense that many managers find easy to overlook. For most manufacturers, the cost of energy accounts for just a small percentage of their overall expenses.

A Study on Generation Expansion Planning Considering Transition of Nuclear and Renewable Policy

2013 ◽  
Vol 291-294 ◽  
pp. 575-580 ◽  
Author(s):  
Jongh Wan Kwon ◽  
Soon Hyun Hwang ◽  
Balho H. Kim
Keyword(s):  
Energy Supply ◽  
Nuclear Power ◽  
Generation Expansion Planning ◽  
Expansion Planning ◽  
Generation Expansion ◽  
Cost Of Energy ◽  
Social Concerns ◽  
Policy Shift ◽  
The Cost ◽  
The Impact

Since the Fukushima nuclear accident, social concerns on eco-friendly and safety are arising, urging changes in the nuclear and renewable policy, worldwide. This policy shift is accompanied by a change of generation mix and an increase in the cost of energy supply. So, analysis of generation expansion planning considering nuclear and renewable polish is essential.In this paper, we compare the impact of some nuclear and renewable policy to the national generation expansion planning based on 5th Power Expansion Planning. The results reveal that disposal of nuclear-power and construction of renewable instead of nuclear enhances the total energy supply cost.

Optical properties of a thin layer of the Vanadium dioxide at the metal state

2015 ◽  
Vol 9 (1) ◽  
pp. 2303-2310
Author(s):  
Abderrahim Benchaib ◽  
Abdesselam Mdaa ◽  
Izeddine Zorkani ◽  
Anouar Jorio
Keyword(s):  
Optical Properties ◽  
Thin Layer ◽  
Vanadium Dioxide ◽  
Ultra Violet ◽  
Index Of Refraction ◽  
Cost Of Energy ◽  
Infra Red ◽  
Metal State ◽  
The Cost ◽  
Reversible Phase

The vanadium dioxide VO₂ currently became very motivating for the nanotechnologies’ researchers. It makes party of the intelligent materials because these optical properties abruptly change semiconductor state with metal at a critical  temperature θ = 68°C. This transition from reversible phase is carried out from a monoclinical structure characterizing its semiconductor state at low temperature towards the metal state of this material which becomes tétragonal rutile for  θ ˃ 68°C ; it is done during a few nanoseconds. Several studies were made on this material in a massive state and a thin layer. We will simulate by Maple the constant optics of a thin layer of VO₂ thickness z = 82 nm for the metal state according to the energy ω of the incidental photons in the energy interval: 0.001242 ≤ ω(ev) ≤ 6, from the infra-red (I.R) to the ultra-violet (U.V) so as to be able to control the various technological nano applications, like the detectors I.R or the U.V,  the intelligent windows to  increase  the energy efficiency in the buildings in order to save the cost of energy consumption by electric air-conditioning and the paintings containing nano crystals of this material. The constant optics, which we will simulate, is: the index of refraction, the reflectivity, the transmittivity, the coefficient of extinction, the dielectric functions ԑ₁ real part and  ԑ₂  imaginary part of the permittivity complexes ԑ of this material and the coefficient absorption. 

Economic impact of the use of the National Surgical Quality Improvement Program

2021 ◽  
Vol 37 (1) ◽  
Author(s):  
Alvine Fansi ◽  
Angela Ly ◽  
Julie Mayrand ◽  
Maggy Wassef ◽  
Aldanie Rho ◽  
...  
Keyword(s):  
Quality Improvement ◽  
Cost Analysis ◽  
Economic Impact ◽  
Quality Improvement Program ◽  
Economic Evaluations ◽  
Complication Rates ◽  
Improvement Program ◽  
Surgical Quality ◽  
Acs Nsqip ◽  
The Cost

Objectives The American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP®) is a validated, risk-adjusted database for improving the quality and security of surgical care. ACS NSQIP can help participating hospitals target areas that need improvement. The aim of this study was to systematically review the literature analyzing the economic impact of using NSQIP. This paper also provides an estimation of annual cost savings following the implementation of NSQIP and quality improvement (QI) activities in two hospitals in Quebec. Methods In June 2018, we searched in seven databases, including PubMed, Embase, and NHSEED for economic evaluations based on NSQIP data. Contextual NSQIP databases from two hospitals were collected and analyzed. A cost analysis was conducted from the hospital care perspective, comparing complication costs before and after 1 year of the implementation of NSQIP and QI activities. The number and the cost of complications are measured. Costs are presented in 2018 Canadian dollars. Results Out of 1,612 studies, 11 were selected. The level of overall evidence was judged to be of moderate to high quality. In general, data showed that, following the implementation of NSQIP and QI activities, a significant decrease in complications and associated costs was observed, which improved with time. In the cost analysis of contextual data, the reduction in complication costs outweighed the cost of implementing NSQIP. However, this cost analysis did not take into account the costs of QI activities. Conclusions NSQIP improves complication rates and associated costs when QI activities are implemented.

Effect of chemical admixtures on the sulfate requirement of cement

1980 ◽  
Vol 7 (2) ◽  
pp. 256-263 ◽  
Author(s):  
M. A. Ward ◽  
S. M. Khalil ◽  
B. W. Langan
Keyword(s):  
Portland Cement ◽  
Initial Temperature ◽  
Precast Concrete ◽  
Steam Curing ◽  
Sulfate Content ◽  
Chemical Admixtures ◽  
Cost Of Energy ◽  
Hot Weather ◽  
The Cost ◽  
Ready Mixed Concrete

As the cost of energy and hence the cost of producing Portland cement increase, the question arises as to whether we are obtaining optimum performance from the admixtures we use. As an example, data are presented indicating that a significant improvement in strength and shrinkage can be achieved by optimizing the sulfate content of the cement for given cement–admixture combinations. It is shown that the optimum SO3 is clearly a function of the initial temperature of the concrete, particularly during the first 24 h after casting, a characteristic of considerable importance in hot weather concreting and steam curing of concrete products. It is recommended that more attention be directed towards optimizing the effectiveness of chemical admixtures in both the ready-mixed concrete and precast concrete industries.

Estimating the cost of pure cybercrime to Australian individuals

2021 ◽  
Author(s):  
Coen Teunissen ◽  
Isabella Voce
Keyword(s):  
Economic Impact ◽  
The Other ◽  
Population Estimates ◽  
Australian Population ◽  
Probability Sampling ◽  
The Past ◽  
Online Panels ◽  
The Cost

This report estimates the cost of pure cybercrime to individuals in Australia in 2019. A survey was administered to a sample of 11,840 adults drawn from two online panels—one using probability sampling and the other non-probability sampling—with the resulting data weighted to better reflect the distribution of the wider Australian population. Thirty-four percent of respondents had experienced some form of pure cybercrime, with 14 percent being victimised in the last 12 months. This is equivalent to nearly 6.7 million Australian adults having ever been the victim of pure cybercrime, and 2.8 million Australians being victimised in the past year. Drawing on these population estimates, the total economic impact of pure cybercrime in 2019 was approximately $3.5b. This encompasses $1.9b in money directly lost by victims, $597m spent dealing with the consequences of victimisation, and $1.4b spent on prevention costs. Victims recovered $389m.

scholarly journals Optimized Placement of Connecting the Distributed Generationswork Stand Alone to Improve the Distribution Systems Reliability

2013 ◽  
Vol 64 (2) ◽  
pp. 76-83
Author(s):  
Hamed Hashemi-Dezaki ◽  
Ali Agheli ◽  
Behrooz Vahidi ◽  
Hossein Askarian-Abyaneh
Keyword(s):  
Genetic Algorithm ◽  
Objective Function ◽  
System Reliability ◽  
Distribution Systems ◽  
Analytical Approach ◽  
Distributed Generations ◽  
Joint Point ◽  
Cost Of Energy ◽  
Optimum Solution ◽  
The Cost

The use of distributed generations (DGs) in distribution systems has been common in recent years. Some DGs work stand alone and it is possible to improve the system reliability by connecting these DGs to system. The joint point of DGs is an important parameter in the system designing. In this paper, a novel methodology is proposed to find the optimum solution in order to make a proper decision about DGs connection. In the proposed method, a novel objective function is introduced which includes the cost of connector lines between DGs and network and the cost of energy not supplied (CENS) savings. Furthermore, an analytical approach is used to calculate the CENS decrement. To solve the introduced nonlinear optimization programming, the genetic algorithm (GA) is used. The proposed method is applied to a realistic 183-bus system of Tehran Regional Electrical Company (TREC). The results illustrate the effectiveness of the method to improve the system reliability by connecting the DGs work stand alone in proper placements.

scholarly journals Techno-Economic Feasibility Study of Investigation of Renewable Energy System for Rural Electrification in South Algeria

2018 ◽  
Vol 8 (5) ◽  
pp. 3421-3426 ◽  
Author(s):  
F. Chermat ◽  
M. Khemliche ◽  
A. E. Badoud ◽  
S. Latreche
Keyword(s):  
Greenhouse Gas Emission ◽  
Electrical Energy ◽  
Energy System ◽  
Economic Feasibility ◽  
Maintenance Cost ◽  
Management Algorithm ◽  
Cost Of Energy ◽  
The Cost ◽  
Operation And Maintenance Cost ◽  
Different Sources

This work aims to consider the combination of different technologies regarding energy production and management with four possible configurations. We present an energy management algorithm to detect the best design and the best configuration from the combination of different sources. This combination allows us to produce the necessary electrical energy for supplying habitation without interruption. A comparative study is conducted among the different combinations on the basis of the cost of energy, diesel consumption, diesel price, capital cost, replacement cost, operation, and maintenance cost and greenhouse gas emission. Sensitivity analysis is also performed.

scholarly journals Techno-economical study of solar water pumping system: optimum design, evaluation, and comparison

2021 ◽  
Vol 6 ◽  
pp. 41
Author(s):  
Hussein A. Kazem ◽  
Anas Quteishat ◽  
Mahmoud A. Younis
Keyword(s):  
Optimum Design ◽  
Meteorological Data ◽  
Average Energy ◽  
Cost Evaluation ◽  
Successful Operation ◽  
Solar Water ◽  
Water Pumping ◽  
Cost Of Energy ◽  
Simulation Results ◽  
The Cost

Solar water pumping systems are fundamental entities for water transmission and storage purposes whether it is has been used in irrigation or residential applications. The use of photovoltaic (PV) panels to support the electrical requirements of these pumping systems has been executed globally for a long time. However, introducing optimization sizing techniques to such systems can benefit the end-user by saving money, energy, and time. This paper proposed solar water pumping systems optimum design for Oman. The design, and evaluation have been carried out through intuitive, and numerical methods. Based on hourly meteorological data, the simulation used both HOMER software and numerical method using MATLAB code to find the optimum design. The selected location ambient temperature variance from 12.8 °C to 44.5 °C over the year and maximum insolation is 7.45 kWh/m2/day, respectively. The simulation results found the average energy generated, annual yield factor, and a capacity factor of the proposed system is 2.9 kWh, 2016.66 kWh/kWp, and 22.97%, respectively, for a 0.81 kW water pump, which is encouraging compared with similar studied systems. The capital cost of the system is worth it, and the cost of energy has compared with other systems in the literature. The comparison shows the cost of energy to be in favor of the MATLAB simulation results with around 0.24 USD/kWh. The results show successful operation and performance parameters, along with cost evaluation, which proves that PV water pumping systems are promising in Oman.

Sign in / Sign up

Export Citation Format

Share Document