scholarly journals Synthesis and Characterization of Zeolite X from Boiler Ash and Aluminum Foil Waste

2021 ◽  
Vol 4 (1) ◽  
pp. 15
Author(s):  
Intan Ayu Safitri ◽  
Iis Siti Jahro
Keyword(s):  
Aluminum Foil ◽  
Degree Of Crystallinity ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Zeolite X ◽  
X Ray ◽  
X Zeolite ◽  
Ft Ir ◽  
Boiler Ash

This study aims to determine the effect of the Si/Al molar ratio and the number of Na2EDTA additions on the purity and crystallinity levels of the synthesized zeolite X. zeolite X was synthesized by hydrothermal method at 70°C and 120°C for 3 and 6 hours, respectively. In the synthesis of zeolite X used boiler ash and aluminum foil waste. The results of characterization using Fourier Transform Infra Red (FT-IR) and X-Ray Diffraction (XRD) showed that the level of purity and crystallinity of the synthesized zeolite X was influenced by the variation of Si/Al molar rasio and amount of Na2EDTA addition. The zeolite with the best quality was obtained from the synthesis with a Si/Al molar ratio of 1.6 and the amount of Na2EDTA added as much as 3.0 g. The synthesized zeolite X has a purity level of 75% and a degree of crystallinity with a total intensity of 845.

Synthesis of Zeolite X from Bentonite via Hydrothermal Method

2020 ◽  
Vol 990 ◽  
pp. 144-148
Author(s):  
Suphada Srilai ◽  
Worapak Tanwongwal ◽  
Kobchai Onpecth ◽  
Thanapat Wongkitikun ◽  
Kollayut Panpiemrasda ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Hydrothermal Method ◽  
The Other ◽  
X Ray Diffraction ◽  
Zeolite X ◽  
Sem Images ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

Zeolite X were successfully synthesized from bentonite from Lopburi province, in Thailand using the two-step of hydrothermal method under optimum condition without calcination. The first step of hydrothermal were obtained at 200 °C for 3 h to remove unreacted impurity minerals such as quartz and muscovite. The secondary step of hydrothermal were obtained at 90 °C for 120 h for synthesis of zeolite X. The characterization of zeolite X were examined by x-ray diffraction (XRD), scanning electron microscopy (SEM), and infrared spectroscopy (FT-IR), respectively. The crystal structure of product was determined as zeolite X by XRD. The morphology of SEM images for zeolite X is octahedral shape. FTIR spectra are in accordance with the other characterization results.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Microwave-assisted solvent-free synthesis and spectral and structural characterization of cyclotriphosphazene hexakis(o-tolylamide)

2018 ◽  
Vol 73 (12) ◽  
pp. 999-1003 ◽  
Author(s):  
Mohammad Hakimi ◽  
Homeyra Rezaei ◽  
Keyvan Moeini ◽  
Heidar Raissi ◽  
Vaclav Eigner ◽  
...  
Keyword(s):  
Nmr Spectroscopy ◽  
Microwave Irradiation ◽  
Stacking Interactions ◽  
X Ray Diffraction ◽  
Aromatic Rings ◽  
X Ray ◽  
Microwave Assisted ◽  
Ft Ir ◽  
Solvent Free Synthesis

AbstractA new cyclotriphosphazene, 2,2,4,4,6,6-hexakis (o-tolylamono)-1,3,5,2λ5,4λ5,6λ5-triazatriphosphinine (MPAP), was prepared using microwave irradiation and identified by elemental analysis, FT-IR, Raman, 31P NMR spectroscopy, and single-crystal X-ray diffraction. In the crystal, in addition to hydrogen bonds, the network is further stabilized by inter- and intramolecular π–π stacking interactions between aromatic rings.

Stability of sodalite relative to nepheline in NaCl–H2O brines at 750 °C: Implications for hydrothermal formation of sodalite

2020 ◽  
Vol 58 (1) ◽  
pp. 3-18 ◽  
Author(s):  
Jonathan B. Schneider ◽  
David M. Jenkins
Keyword(s):  
Infrared Spectroscopy ◽  
Constant Temperature ◽  
Molar Ratio ◽  
Standard State ◽  
X Ray Diffraction ◽  
Cage Structure ◽  
X Ray ◽  
Brine Concentration

ABSTRACT Formation of the feldspathoid sodalite (Na6Al6Si6O24·2NaCl) by reaction of nepheline (NaAlSiO4) with NaCl-bearing brines was investigated at 3 and 6 kbar and at a constant temperature of 750 °C to determine the brine concentration at which sodalite forms with variation in pressure. The reaction boundary was located by reaction-reversal experiments in the system NaAlSiO4–NaCl–H2O at a brine concentration of 0.16 ± 0.08 XNaCl [= molar ratio NaCl/(NaCl + H2O)] at 3 kbar and at a brine concentration of 0.35 ± 0.03 XNaCl at 6 kbar. Characterization of the sodalite using both X-ray diffraction and infrared spectroscopy after treatment in these brines indicated no obvious evidence of water or hydroxyl incorporation into the cage structure of sodalite. The data from this study were combined with earlier results by Wellman (1970) and Sharp et al. (1989) at lower (1–1.5 kbar) and higher (7–8 kbar) pressures, respectively, on sodalite formation from nepheline and NaCl which models as a concave-down curve in XNaCl – P space. In general, sodalite buffers the concentration of neutral aqueous NaCl° in the brine to relatively low values at P < 4 kbar, but NaCl° increases rapidly at higher pressures. Thermochemical modeling of these data was done to determine the activity of the aqueous NaCl° relative to a 1 molal (m) standard state, demonstrating very low activities (<0.2 m, or 1.2 wt.%) of NaCl° at 3 kbar and lower, but rising to relatively high activities (>20 m, or 54 wt.%) of NaCl° at 6 kbar or higher. The results from this study place constraints on the concentration of NaCl° in brines coexisting with nepheline and sodalite and, because of the relative insensitivity of this reaction to temperature, can provide a convenient geobarometer for those localities where the fluid compositions that formed nepheline and sodalite can be determined independently.

The Characterization of Bovine Bone-Derived Hydroxyapatite Isolated Using Novel Non-Hazardous Method

2020 ◽  
Vol 45 ◽  
pp. 49-56
Author(s):  
Aniek Setiya Budiatin ◽  
Samirah ◽  
Maria Apriliani Gani ◽  
Wenny Putri Nilamsari ◽  
Chrismawan Ardianto ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Extraction Method ◽  
Bovine Bone ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Novel Method ◽  
Scanning Electron

Bovine bone is a considerable source for the production of hydroxyapatite. The recent study reported a novel method to extract hydroxyapatite from bovine bone without producing hazardous residue. The bovine bones were cut and boiled in the opened chamber followed by boiling in pressurized tank. The bones were then soaked into 95% ethanol. Calcination was then conducted in 800°C, 900°C and 1,000°C, for 2 hours. The result was then grinded and sieved. The powder then was characterized using Fourier transform infrared (FT-IR), Scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD) to measure the purity of hydroxyapatite. It is concluded that the hydroxyapatite derived from this process showed 100% purity, resulting 35.34 ± 0.39% w/w from the wet bone weight and 72.3% w/w from the dried weight. The present extraction method has been proven to yield high amount of pure hydroxyapatite as well as reducing the use of hazardous reagent.

scholarly journals Synthesis, Crystal Structures, and Spectroscopic Characterization of Bis-aldehyde Monomers and Their Electrically Conductive Pristine Polyazomethines

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1498 ◽  
Author(s):  
Abdul Hafeez ◽  
Zareen Akhter ◽  
John F. Gallagher ◽  
Nawazish Ali Khan ◽  
Asghari Gul ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Spectroscopic Characterization ◽  
Spectroscopic Techniques ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Electrically Conductive ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir

Bis-aldehyde monomers 4-(4′-formyl-phenoxy)benzaldehyde (3a), 3-methoxy-4-(4′-formyl-phenoxy)benzaldehyde (3b), and 3-ethoxy-4-(4′-formyl-phenoxy)benzaldehyde (3c) were synthesized by etherification of 4-fluorobenzaldehyde (1) with 4-hydroxybenzaldehyde (2a), 3-methoxy-4-hydroxybenzaldehyde (2b), and 3-ethoxy-4-hydroxybenzaldehyde (2c), respectively. Each monomer was polymerized with p-phenylenediamine and 4,4′-diaminodiphenyl ether to yield six poly(azomethine)s. Single crystal X-ray diffraction structures of 3b and 3c were determined. The structural characterization of the monomers and poly(azomethine)s was performed by FT-IR and NMR spectroscopic techniques and elemental analysis. Physicochemical properties of polymers were investigated by powder X-ray diffraction, thermogravimetric analysis (TGA), viscometry, UV–vis, spectroscopy and photoluminescence. These polymers were subjected to electrical conductivity measurements by the four-probe method, and their conductivities were found to be in the range 4.0 × 10−5 to 6.4 × 10−5 Scm−1, which was significantly higher than the values reported so far.

Characterization of Electrospun Poly(Lactic Acid)/polyaniline Blend Nanofibers

2011 ◽  
Vol 332-334 ◽  
pp. 317-320 ◽  
Author(s):  
Hui Qin Zhang
Keyword(s):  
Lactic Acid ◽  
Composite Nanofibers ◽  
Weight Ratio ◽  
Electrospinning Process ◽  
Poly Lactic Acid ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Ft Ir

In this study, composite nanofibers of polyaniline doped with dodecylbenzene sulfonic acid (PANI-DBSA) and Poly(lactic acid) (PLA) were prepared via an electrospinning process. The surface morphology, thermal properties and crystal structure of PLA/PANI-DBSA nanofibers are characterized using Fourier transform infrared spectroscopy (FT-IR), wide-angle x-ray diffraction (WAXD) and scanning electron microscopy (SEM). SEM images showed that the morphology and diameter of the nanofibers were affected by the weight ratio of blend solution.

Preparation and Electrical Characterization of Poly(Aniline) NanoClay Composites

2015 ◽  
Vol 34 (4) ◽  
Author(s):  
Esma Ahlatcioǧlu ◽  
Bahire Filiz şenkal ◽  
Mustafa Okutan
Keyword(s):  
Electrical Characterization ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Ft Ir ◽  
Doped Polyaniline ◽  
Poly Aniline ◽  
Scanning Electron

AbstractIn this work, synthesis and characterization of composite materials based on NanoClay(NC) and boric acid doped PolyAniline (PANI) is studied. PANI was successfully incorporated into NC to form PANI-NC composites. The resulting organic-inorganic hybrid material, PANI-NC was characterized by various physicochemical techniques. Formation of PANI inside the clay tactoid has been confirmed by X-ray diffraction studies (XRD), scanning electron microscope (SEM) and FT-IR. Also, conductivity and physical properties of the PANI-NC composites were investigated.

Reaction of 2-[(2-aminoethyl)amino]ethanol with pyridine-2-carbaldehyde and complexation of the products with CuII and CdII along with docking studies

2019 ◽  
Vol 75 (7) ◽  
pp. 951-959 ◽  
Author(s):  
Zahra Mardani ◽  
Mohammad Hakimi ◽  
Keyvan Moeini ◽  
Fabian Mohr
Keyword(s):  
Crystal Packing ◽  
Docking Studies ◽  
Molar Ratio ◽  
Distorted Octahedral Geometry ◽  
X Ray Diffraction ◽  
Donor Ligand ◽  
X Ray ◽  
H Nmr ◽  
Distorted Octahedral ◽  
Ft Ir

The reaction between 2-[2-(aminoethyl)amino]ethanol and pyridine-2-carbaldehyde in a 1:2 molar ratio affords a mixture containing 2-({2-[(pyridin-2-ylmethylidene)amino]ethyl}amino)ethanol (PMAE) and 2-[2-(pyridin-2-yl)oxazolidin-3-yl]-N-(pyridin-2-ylmethylidene)ethanamine (POPME). Treatment of this mixture with copper(II) chloride or cadmium(II) chloride gave trichlorido[(2-hydroxyethyl)({2-[(pyridin-2-ylmethylidene)amino]ethyl})azanium]copper(II) monohydrate, [Cu(C10H16N3O)Cl3]·H2O or [Cu(HPMAE)Cl3]·H2O, 1, and dichlorido{2-[2-(pyridin-2-yl)oxazolidin-3-yl]-N-(pyridin-2-ylmethylidene)ethanamine}cadmium(II), [CdCl2(C16H18N4O)] or [CdCl2(POPME)], 2, which were characterized by elemental analysis, FT–IR, Raman and 1H NMR spectroscopy and single-crystal X-ray diffraction. PMAE is potentially a tetradentate N3O-donor ligand but coordinates to copper here as an N2 donor. In the structure of 1, the geometry around the Cu atom is distorted square pyramidal. In 2, the Cd atom has a distorted octahedral geometry. In addition to the hydrogen bonds, there are π–π stacking interactions between the pyridine rings in the crystal packing of 1 and 2. The ability of PMAE, POPME and 1 to interact with ten selected biomolecules (BRAF kinase, CatB, DNA gyrase, HDAC7, rHA, RNR, TrxR, TS, Top II and B-DNA) was investigated by docking studies and compared with doxorubicin.

Preparation and Characterization of Supported H3PW12O40 and Supported Cesium-Substituted Dodecatungstophosphate

2012 ◽  
Vol 509 ◽  
pp. 321-327 ◽  
Author(s):  
Zi Li Liu ◽  
Cui Xia Xu ◽  
Qian Wen Dai ◽  
Chao Xiang ◽  
Jian Jie Zhang
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalysts ◽  
Incipient Wetness Impregnation ◽  
Acid Catalysts ◽  
X Ray Diffraction ◽  
X Ray ◽  
Highly Dispersed ◽  
Probe Experiment ◽  
Ft Ir

Supported H3PW12O40 (HPW) and supported Cesium-Substituted dodecatungsto-phosphate are eco-friendly solid acid catalysts. A series of different loading H3PW12O40/SiO2 and HPW/diatomite were prepared by a typical incipient wetness impregnation of methanol, meanwhile SiO2 and diatomite supported Cs-salt catalysts were prepared via two-step impregnating method. The catalysts were investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The results indicate that the Keggin structure of HPW is intact in the SiO2-supported HPW and SiO2-supported CsHPW. HPW and CsHPW are highly dispersed in the SiO2 at the low loading, while the loading is more than 40% the catalyst grains increase and gather on the surface of the carrier. What's more, diatomite is not a suitable support. HPW and CsHPW have better distribution in the SiO2 than in the diatomite. The activity of catalyst was tested in probe experiment of the alkylation of thiopene (TH) with 1-hexene.

Sign in / Sign up

Export Citation Format

Share Document